Thanks... My daughter and I were able to remove a truck cover so it could be used to move some furniture and then reinstall the cover thanks to your video! We placed the cover on four 5 gallon buckets for the week it was removed.
Thank you Very Much for that Video.... Now there's no question as to the steps I need to take in removing and replacing my Cover .... 👍👍 March 17th 2020
Good video for removal. Thank you. Not much maintenance, but the locking rods on mine will rust in place where they go through the guides if it is not used every once in a while.
I bought a 2018 Honda Ridgeline with an ARE hard cover. It's looks so good on the truck. But yeah, I got a move some furniture next week so I watched this video to prepare myself to remove it lol.
Great info, I just need to move my cover back so I can work on the 3rd stop light which has a leak. I don't want to climb on the cover because I'm afraid it might break. Do you know what is a safe weight limit the cover will hold without damage?
I didn't see the part where they unscrewed the shocks. Where do the shocks bolt onto? I've got everything on except the shocks. I've got them zip tied up but where do they connect at?
My lock cylinder is stuck and cannot be locked anymore. I wonder where I could get a replacement? I tried to contact local Ottawa dealer but never got a reply.
I like the video and appreciate the step by step visual but there is no sound between 0:50 and 3:56. And later in the video, starting at 5:16, the sound goes bad because Brian is the only one with a microphone and you can't hear Gary when Brian goes under the tonneau cover.
Hoping you will reapond, cant find any info online. What is the weight capacity on top of the tonneau? Need to change 3rd brake light, can someone sit on the cover or will it be damaged?
I have c clamps on mine and unfortunately the bolts seem to be completely rusted in. Doesn't seem like I'll ever be able to get it off. Tried all the loosing products and still stuck
My 00 s10 came with an ARE fiberglass bed cover. literally takes 5 seconds with two people to remove and set aside. just lift it high and slide back to unhook is all it takes. why make it literally a project on your new designs? makes no sense.
I just purchased the LSX painted to match cover for my 2020 Limited Ram. I put this cover on all of my trucks. This one did not have rubber trim around the cover,is that correct or did it get left off at the factory? Also it looks to be to large next to the cab of the truck. Not a good fits! Please help. 662-681-6125.
Hope you don't need parts..... good luck getting them. You'd think they'd sell them on their site but they don't. So God help you because now you have to find a dealer, give them the serial number and wait next to forever to get simple parts......
No, I have listened to this video 3 times. However, he didn't say 1/4 allen but 1/8 allen. The guy clearly says a few tools needed, a small screwdriver, 1/8 allen, and 4mm allen. I'm not confused, just admit the mistake as anyone can do.
The wait for these things is ridiculous. If you buy a 2024 truck, you might get your cover before 2025 but don't bet on it. I am six months into my wait for a fusion tonneau cover
If you are going to go to the trouble of making a video like this, next time use a truck with a contrasting color, like white, so you BLACK parts are clearly visible in the video. ALSO, it's nice (maybe) that you show the 4mm allen wrench - because that's all many truck owners may have - but THEN use a cordless screwdriver with an extension so you can get your stupid hands out of view so people can actually SEE what is going on. The developers of this video operated unencumbered by the thought process.
Great product but the company doesn't sell parts..... you have to go to a dealer and wait 8 weeks for simple parts. Would recommend you do your research into other truck cap options. I got this with a spotless truck box that I used to replace my old truck box while rebuilding a 1999 Dodge Dakota.... the place that I got the box from didn't bother giving me the clamps or lift arms that came with the cap so that's where the adventure began...... 8 weeks later and MANY complaints they are finally sending the parts to a dealer so I can get them. Not a good way to do business for a cap that has a serial number so the parts list should already be known. Service after the original sale grade D. There are other options like Leer or SnugTop. Which I will be exploring for my new truck.... never going through this again.
Thanks... My daughter and I were able to remove a truck cover so it could be used to move some furniture and then reinstall the cover thanks to your video! We placed the cover on four 5 gallon buckets for the week it was removed.
Thank you Very Much for that Video.... Now there's no question as to the steps I need to take in removing and replacing my Cover .... 👍👍 March 17th 2020
Thanks for the clear video - now to get to work.
Good video for removal. Thank you.
Not much maintenance, but the locking rods on mine will rust in place where they go through the guides if it is not used every once in a while.
I bought a 2018 Honda Ridgeline with an ARE hard cover. It's looks so good on the truck. But yeah, I got a move some furniture next week so I watched this video to prepare myself to remove it lol.
Great info, I just need to move my cover back so I can work on the 3rd stop light which has a leak. I don't want to climb on the cover because I'm afraid it might break. Do you know what is a safe weight limit the cover will hold without damage?
I didn't see the part where they unscrewed the shocks. Where do the shocks bolt onto?
I've got everything on except the shocks. I've got them zip tied up but where do they connect at?
I was wondering where I can order mounting pieces I bought one used and I need the black caps that hold the joint together near the driver side .
4 people recommended to remove, wow, that's almost convenient !!
Where do the 2 little screws go ? Is there a place to download a manual
My lock cylinder is stuck and cannot be locked anymore. I wonder where I could get a replacement? I tried to contact local Ottawa dealer but never got a reply.
I have had three different LSII tops and have never had clamps like those in the video. Mine are and always have been c-clamps. Hmmm?
Do all the parts to the cover come off w/it when removed?.. bought a Ridgeline w/one already on.
Could I put it on a tarp and on the ground?
Do you have lights in that garage? You should turn them on. All I see is black on black and the back of someones hand turning something.....I think.
Where can I get those clamps. And get that special clamp
I like the video and appreciate the step by step visual but there is no sound between 0:50 and 3:56. And later in the video, starting at 5:16, the sound goes bad because Brian is the only one with a microphone and you can't hear Gary when Brian goes under the tonneau cover.
I like this cover over undercover lux elite , but wish the removal was a little bit more easer ..
Anyone know how to install the rear bolts that screw into the wing nut? That was conveniently left out of this video
How do you change the lock?
I lost the key
I can't find any videos
Thanks
What if the toneau doest want to open?
Hoping you will reapond, cant find any info online. What is the weight capacity on top of the tonneau? Need to change 3rd brake light, can someone sit on the cover or will it be damaged?
Just use a ladder lol
The clamps with mine are totally different. Truck is a 02 Ranger.
It would be nice if they would of should were the cover rails set by the tail gate .
So easy folks!
Shouldn’t you reapply new tape? I took mine off only after a few days and the tape was flat ass a pancake already.
My lock is just like one shown here. Is there a video showing how to replace?
I have the same problem. Lost the key
Okeeddokky here we go!😬🙏🏼
Lol.
I have c clamps on mine and unfortunately the bolts seem to be completely rusted in. Doesn't seem like I'll ever be able to get it off. Tried all the loosing products and still stuck
Mr_Levi423 cut em off use an angle grinder
Rust never sleeps ;)
My 00 s10 came with an ARE fiberglass bed cover. literally takes 5 seconds with two people to remove and set aside. just lift it high and slide back to unhook is all it takes. why make it literally a project on your new designs? makes no sense.
Any body wants to buy one for a 2008 Tundra super crew?
I just purchased the LSX painted to match cover for my 2020 Limited Ram. I put this cover on all of my trucks. This one did not have rubber trim around the cover,is that correct or did it get left off at the factory? Also it looks to be to large next to the cab of the truck. Not a good fits! Please help. 662-681-6125.
Where can I find the key 🔑 code? I lost my key
There are only 20 different key cuts. My dealer had all 20, we tried each one until we found the right one.
How much are these covers roughly? I found one at a jnkyard for $70
Hope you don't need parts..... good luck getting them. You'd think they'd sell them on their site but they don't. So God help you because now you have to find a dealer, give them the serial number and wait next to forever to get simple parts......
Man this looks so confusing I wish I wasn’t so clueless when it comes to this stuff
Good video but what was the 1/4 allen for?
No, I have listened to this video 3 times. However, he didn't say 1/4 allen but 1/8 allen. The guy clearly says a few tools needed, a small screwdriver, 1/8 allen, and 4mm allen. I'm not confused, just admit the mistake as anyone can do.
The bolt/screw is 1/4 inch, not the allen wrench.
The wait for these things is ridiculous. If you buy a 2024 truck, you might get your cover before 2025 but don't bet on it. I am six months into my wait for a fusion tonneau cover
Bolts are stripped grrr.. need to order new bolts
If you are going to go to the trouble of making a video like this, next time use a truck with a contrasting color, like white, so you BLACK parts are clearly visible in the video. ALSO, it's nice (maybe) that you show the 4mm allen wrench - because that's all many truck owners may have - but THEN use a cordless screwdriver with an extension so you can get your stupid hands out of view so people can actually SEE what is going on. The developers of this video operated unencumbered by the thought process.
Great product but the company doesn't sell parts..... you have to go to a dealer and wait 8 weeks for simple parts. Would recommend you do your research into other truck cap options. I got this with a spotless truck box that I used to replace my old truck box while rebuilding a 1999 Dodge Dakota.... the place that I got the box from didn't bother giving me the clamps or lift arms that came with the cap so that's where the adventure began...... 8 weeks later and MANY complaints they are finally sending the parts to a dealer so I can get them. Not a good way to do business for a cap that has a serial number so the parts list should already be known. Service after the original sale grade D. There are other options like Leer or SnugTop. Which I will be exploring for my new truck.... never going through this again.
Why do they make the dodge ram tonneau covers heavy as hell. About as useful as tits on a board. You didn't show how to remove the hinge at the front?
where do you get replacement bumpers and pads for topnof of the lid?