The CRX has become very rare and expensive. B-swaps have gotten crazy expensive from what they used to be. I bought my crx for $700(stock driver) in 2008, I spent about 2 years and $2,500 piecing together and building a b16 swap. It only makes 184hp and I love it. If you were going to try and build one today, I think it would cost 2-3x that. Save the EF's, K-swap the world. Be Safe all !
Very rare bro my SI I bought for 1000 bucks in pretty messed up condition in 2002. Fast forward today 21 Years today with a built B16B and all the goodies it stands at a street value of over 15000 in todays prices The B16B alone built was about 4000 bucks not mention paint , body kit wheels and some minor things. With over 250 + HP NA there is nothing like it. I drive other and own other cars I am telling you. Supras , Porsches, and Acuras this one is a keeper.
I searched for almost 6months for one. I didn't want to give in on the "2022"prices. At the end I bought one for 1200. Although it's automatic that was the least of my worries. What I wanted was a solid body and being able to driven daily. I already have most parts for the manual conversion,and all the parts for black trim interior. Next is my attention will go towards the drivetrain😎
@@israel984 and greedy people are using covid as there excuse to gouge the prices. Just dont give in to the greedy bastards. I bought a set of mudflaps for 100$ even though it seems high its better then paying 300$for the front alone😏
I have an 88hf CRX with a k24a2 mated to a type S 6 speed. I know very well the complexity of this swap. Same shifter setup as well. Totally a more involved swap than putting a K into an EG or Ek. Super jealous of the AC!
Man I hear you. I own a 88 CRX with the B16A and the limited slip transmission and just finished putting in AC and insulation to quiet it down. The AC took over 4 months to piece together and install and configure but it was worth it.
My 1989 CRX also has a K24A2 with 6 speed LSD. I wish my hood would fit and I'm jealous of the AC. I do have Type S oil pump and 45 deg vtc. I need a good tune now.
I love my sleepers. Had a 98 EJ8 coupe. Stock steelies and hubcaps. Did a complete B16a SIR-II swap in it and drove it like that for over a decade. No where near as cool as this build but at the time it was a fun car that caught a lot of people off gaurd simply because it looked stock. I miss that car so much that I just picked up 2000 EJ8 same color with rod knock and I plan on doing another reliable sleeper build.
I'd have to agree that horse power is not everything I built a 92 civic hatch to daily drive it has a k24a2 swap and plenty for what I do. it made 231hp 200tq and it's stock with rdx injectors
Nice! My 1989 CRX has a K24A2 6 speed LSD. I installed the Type S oil pump and Drag Cartel 45 deg vtc. I wish my hood would fit. I need a good tune. I'd love 230 hp 200 torque.
Sick build - your customer has good taste. But something you said caught my attention: "No one has done AC in a K swap car before" right around minute mark 4:50. Do you mean in a CRX? Because I have a K swap EK with RBC intake, AC, P/S, and passes Illinois emissions and its been complete and driving since last year. You are dead on, it is not easy, and all credit to Rudz Racing here for making it happen. Love all the content, Humble Performance always delivers!!!
I have had my CRX for about 18 years now and most of its time sitting in my garage. I recently took it out and revamped the fuel system, brakes, top end gasket and seals... currently working on getting the body restored through a local body shop here in south florida. My desire is to make 200HP on a Bseries swap or build up my D-series motor... kinda torn at the moment cause I really haven't really decided, what I truly want to do...
Hell yeah that's one super clean sleeper I wonder how much the whole swap cost with the haltech ECU and harness love to have that in my California car sleeper is the best way to go to Cali
I've got a 1991CRX DX W/ 344K miles on it with 5 Speed and factory AC (Still works) and original Clutch. I use it as a daily driver... Teal Green. Owned it for 18 years, since 2005. Any idea what it may be worth? I saw a '91 SI that went for 21K on Bring a Trailer from Tucson, Az. Mine is solid AZ no rust...... in AZ since new ...............
Love this video, wish it was a longer video with better sound and more detail. I have a 89 so and would love to do this swap. Is it he six speed possible and still look stock?
I own a crx stock engine and let me tell you is super fun to drive it .. and the gas❤❤ that thing is super cheap to drive but parts are rare and expensive af
Car is awesome. I kinda want to go crazy with miata parts and welding & custom fabrication but the idea of a k20 with ac is very cool . Mines a 5 spd crx si. I also have an 04 odyssey which i actually love but rhe transmission is going. That j35 will go in something one day. I wanted a 3g civic hatchback but came across the crx for 500$ too good to pass up. Cheers thanks for the video
If you want to finish first, one needs to choose their words wisely. "A" players, say less and finish in a shorter amount of time to be first. When opening the interaction, if one talks fast, it triggers a response that says oh that guy's trying to steamroll me like some typical salesman. The listener has counter it each time in their mind. Great presentation and car set up as always.
RBC, ebay gt3582 or 3076r, 6 speed si trans, Hondata, and lowish boost and id call it good. Last i budgeted it you could do it for under $5k back when rollers were cheap. wish i had done it
Now that you told me price i believe I’ll stay with my 200 plus hp all motor B had professional instal and haven’t touched 18 grand maybe ten with a 98 teg now after I do Haltec mite have 12,500 in it
And hell yes called the right people to save this EF everybody that's got an EF and wants to do this call these guys number one in the business love all the content and let's save our cars go sign the RPM act the fight against the EPA trying to kill racing let's keep it alive 🇺🇸🇺🇸💯💯💯💯💯🤟🤟🤟🤟🤟🤟🙌🙌🙌🙌🙏🙏🙏🥳🥳🥳🥳
On the outside yeah, looks stock but open the bonnet and it's a dead giveaway it's not stock at all. Not a true Sleeper. I shouldn't complain though, at least it hasn't been gutted out and turned into a dragster like most other 'rex.
Look at that subtle sea green paint. The tasteful thickness of plastic trim pieces. Oh my God, it even has steelies
Now let’s see Paul Allen’s honda …
Awesome comment😂
The CRX has become very rare and expensive. B-swaps have gotten crazy expensive from what they used to be.
I bought my crx for $700(stock driver) in 2008, I spent about 2 years and $2,500 piecing together and building a b16 swap. It only makes 184hp and I love it. If you were going to try and build one today, I think it would cost 2-3x that. Save the EF's, K-swap the world. Be Safe all !
Very rare bro my SI I bought for 1000 bucks in pretty messed up condition in 2002. Fast forward today 21 Years today with a built B16B and all the goodies it stands at a street value of over 15000 in todays prices The B16B alone built was about 4000 bucks not mention paint , body kit wheels and some minor things. With over 250 + HP NA there is nothing like it. I drive other and own other cars I am telling you. Supras , Porsches, and Acuras this one is a keeper.
I searched for almost 6months for one. I didn't want to give in on the "2022"prices. At the end I bought one for 1200. Although it's automatic that was the least of my worries. What I wanted was a solid body and being able to driven daily. I already have most parts for the manual conversion,and all the parts for black trim interior. Next is my attention will go towards the drivetrain😎
Bro everything is 1.5 to like 3 x more expensive cause of covid induced recession
@@israel984 and greedy people are using covid as there excuse to gouge the prices. Just dont give in to the greedy bastards. I bought a set of mudflaps for 100$ even though it seems high its better then paying 300$for the front alone😏
@@israel984 now people are basing there prices on ebay😂
Srry for the wind noise!
😅😅😅
Whoosh!
So refreshing to see a car focused on performance versus looks. This makes me so excited to drop a K20 in my EK! Great video
I got a k20z1 ek love it so much :)
Love my CRX ❤️Not many of them out on the roads left.
I have an 88hf CRX with a k24a2 mated to a type S 6 speed. I know very well the complexity of this swap. Same shifter setup as well. Totally a more involved swap than putting a K into an EG or Ek. Super jealous of the AC!
Man I hear you. I own a 88 CRX with the B16A and the limited slip transmission and just finished putting in AC and insulation to quiet it down. The AC took over 4 months to piece together and install and configure but it was worth it.
I'm the original owner of an
88 CRX HF .
I use it daily and it looks and runs great.
I get offers on it all the time.
My 1989 CRX also has a K24A2 with 6 speed LSD. I wish my hood would fit and I'm jealous of the AC. I do have Type S oil pump and 45 deg vtc. I need a good tune now.
👍😎 Thank you for the upload and wishing the entire Humble Family much success and Good health for the 2022 season!
Totally Lowkey and under the radar with those wheels and that color its so unassuming.
I love my sleepers. Had a 98 EJ8 coupe. Stock steelies and hubcaps. Did a complete B16a SIR-II swap in it and drove it like that for over a decade. No where near as cool as this build but at the time it was a fun car that caught a lot of people off gaurd simply because it looked stock. I miss that car so much that I just picked up 2000 EJ8 same color with rod knock and I plan on doing another reliable sleeper build.
So happy you guys are back to posting!
I'd have to agree that horse power is not everything I built a 92 civic hatch to daily drive it has a k24a2 swap and plenty for what I do.
it made 231hp 200tq and it's stock with rdx injectors
Nice! My 1989 CRX has a K24A2 6 speed LSD. I installed the Type S oil pump and Drag Cartel 45 deg vtc. I wish my hood would fit. I need a good tune. I'd love 230 hp 200 torque.
Sick build - your customer has good taste. But something you said caught my attention: "No one has done AC in a K swap car before" right around minute mark 4:50. Do you mean in a CRX? Because I have a K swap EK with RBC intake, AC, P/S, and passes Illinois emissions and its been complete and driving since last year. You are dead on, it is not easy, and all credit to Rudz Racing here for making it happen. Love all the content, Humble Performance always delivers!!!
Just picked up a 87 HF with 86 Si swap. Love this car. Simple and quick
ASMR: “The Sound of Wind”
We already missed you guys so much!
Currently working on my 88 si and this is motivation!
This is my favorite build that you guys have done. Great work, it really has me wanting to use my spare k20a2 block in my 90si hatch
Ive seen some people get a hood to fit on a K24. I would like to know how??
Maybe they used a siR style hood.
@Ty-kv3zb The siR style hood is great, but I also have an RBC manifold. Those stick up much higher.
Al fin video!! Hace tiempo no veía nada de ustedes. Saludos desde Ponce, P.R.
I have had my CRX for about 18 years now and most of its time sitting in my garage. I recently took it out and revamped the fuel system, brakes, top end gasket and seals... currently working on getting the body restored through a local body shop here in south florida. My desire is to make 200HP on a Bseries swap or build up my D-series motor... kinda torn at the moment cause I really haven't really decided, what I truly want to do...
I threw a b20 in mine last year and it's 1000x more enjoyable. Double the tq and double the hp of my d16 zc that was in it.mine is an si hatch.
Hell yeah that's one super clean sleeper I wonder how much the whole swap cost with the haltech ECU and harness love to have that in my California car sleeper is the best way to go to Cali
exactly the kind of crx im looking for .
It's been a minute glad to see use back
I've got a 1991CRX DX W/ 344K miles on it with 5 Speed and factory AC (Still works) and original Clutch. I use it as a daily driver... Teal Green. Owned it for 18 years, since 2005. Any idea what it may be worth? I saw a '91 SI that went for 21K on Bring a Trailer from Tucson, Az. Mine is solid AZ no rust...... in AZ since new ...............
Wish you made a video on this simple build.
Love this video, wish it was a longer video with better sound and more detail. I have a 89 so and would love to do this swap. Is it he six speed possible and still look stock?
I always say “Sputnik” my 90 hatch SI saved my life. I wish so bad I didn’t sell it. Hindsight I guess. Awesome build guys!
Man what a clean build! 👌
You guys helped my dads car you guys swapped my dad‘s engine with a Vtec
Welcome back
Finally a vid lol love u guys Arecibo en la casa
Wow I was dying to see a video.. mi jente linda de Puerto Rico
I own a crx stock engine and let me tell you is super fun to drive it .. and the gas❤❤ that thing is super cheap to drive but parts are rare and expensive af
Hit the junkyards,and stop using the word "rare" it only let's people price gouge the prices😆
What are you talking about rare. Rock auto has everything I punched in
\
LFG! Been a min since I heard that intro and Kenny!
Super rad!
Welcome back!
Car is awesome. I kinda want to go crazy with miata parts and welding & custom fabrication but the idea of a k20 with ac is very cool . Mines a 5 spd crx si. I also have an 04 odyssey which i actually love but rhe transmission is going. That j35 will go in something one day. I wanted a 3g civic hatchback but came across the crx for 500$ too good to pass up. Cheers thanks for the video
If you want to finish first, one needs to choose their words wisely. "A" players, say less and finish in a shorter amount of time to be first. When opening the interaction, if one talks fast, it triggers a response that says oh that guy's trying to steamroll me like some typical salesman. The listener has counter it each time in their mind. Great presentation and car set up as always.
Got that skillshare money mosdef coming up as always💯🤘
Finally a new video. It's been so long guys 💔😔. Heck yeah Kenny you cut your hair omg lol. Tyson is proud of you 👏
Would you guys consider taking on a 2004 acura tsx 6 speed and converting it to awd 6 speed using parts off the awd cl8 honda accord?
Sure missed these videos
Saludos mi gente de humble performance buén trabajo ," flaco tech" en la casa 🇵🇷✌️👍💪🇵🇷🇵🇷
RBC, ebay gt3582 or 3076r, 6 speed si trans, Hondata, and lowish boost and id call it good. Last i budgeted it you could do it for under $5k back when rollers were cheap. wish i had done it
Awesome work. Still the best channel intro on UA-cam!
Enjoyed the video... Great info all around. But is it just me or ur mic gets a lot of wind noise?
What does it make? Just wondering ik yall didn't go for crazy power
Still the best intro on UA-cam!! 🔥🔥🔥
The is a Nice build 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻 perfect set up!
Sleeper for sure
that crx go go go..
How did you keep a/c?
Do you guys offer tuning for Fuel Tech ecus ?
Great format.
Loved this watched it bell to bell. I'm excited about this year. Do you know any kdm shops? I have a 17 Elantra. I think 🤔 could b something...
About time for another video...LOL
Been a minute since I seen a video from you guys, I hope the owner paints it
What axles is it running? Idk if you mentioned it.
Damn! you just made me a subscriber! More vids of Honda man!
Sick build
Sweet build. What is the price tag out the door for that work?
Great video, great construction, Work. Hard. Stay. Humble.
About time!
🔥🔥🔥🔥 good shit like always
We need more merch!
What was the invoice for that set up i want it
~$15,000 out the door with parts and labor.
What condenser did you use
Now that you told me price i believe I’ll stay with my 200 plus hp all motor B had professional instal and haven’t touched 18 grand maybe ten with a 98 teg now after I do Haltec mite have 12,500 in it
Boy got them new air fawk wons
Nah Genuine Shadow Reds
100% love it
And hell yes called the right people to save this EF everybody that's got an EF and wants to do this call these guys number one in the business love all the content and let's save our cars go sign the RPM act the fight against the EPA trying to kill racing let's keep it alive 🇺🇸🇺🇸💯💯💯💯💯🤟🤟🤟🤟🤟🤟🙌🙌🙌🙌🙏🙏🙏🥳🥳🥳🥳
The only draw back is the stereo sytem ,, thats the only thing it needs😃,, 👍
Awesome!
I need a budget turbo kit for my crx.
So who made the AC kit?
Built in House.
Less wind in the mic would have been better. Still enjoyed the video though, so much nostalgia.
Best fckn intro!
Do you lose reliability at 500whp?
What hp is in the crx?
What axles ?
How tall are you lol and how much was that OEM plus upgrade
Humble Performance ... Last posted 3 months ago ??
Yelp thats the truth I got 200 plus hp all motor teg on jack stands. Wish I would of went another
Windy!
Esa guagua se Llama la crackera
Awesome CRX! Humble hard at work, very nice!
The best cars
Let's gooo humble 🔥
Dyno number?
CRX or EG hatchback?
Total unit
i can barely hear you over the wind noise :(
sound from the wind is horrible. killed the whole video.
On the outside yeah, looks stock but open the bonnet and it's a dead giveaway it's not stock at all.
Not a true Sleeper. I shouldn't complain though, at least it hasn't been gutted out and turned into a dragster like most other 'rex.
This is the single dumbest thing I’ve ever heard.
Awe, yours has been on jack stands for 3 years? My CRX has been in the garage for 12 😥
My k swap Civic has ac and ps. Shrugs
Less videos the better. Make everybody wonder what your doing.
Please make this a sleeper awd to 🙏
Howdy
I was going to race a 1500 lbs crx until I realized it doesn't have a subframe