Does yours make a crunchy or clacky sound when you take off?mine seems to sound like the transmission is slipping until its up to speed then smooth sounding.any input would be awesome thanks guys love the channel
Know Nothing Rc Thanks for the support! No I have not experienced that issue before but I will pin this on the comments hopefully someone has and can speak on it.
mine runs like a champ. Might need to get some grease in your UDR? I am thinking of doing that just to help keep the dust and water out of my rig. I hope you get it fixed! :P
Know Nothing Rc it sounds like it might be a diff pinion failure there might be a tooth that broke off and cousing it to click and crunch and skip a tooth under load
When I bought this truck I placed in my 2 2s lipo Floureon 7.4V 40c 6200 mAh batteries would last as a pair maybe 15 minutes. I ran 2 different sets with same results. However; the truck behaved like it was low on power and getting the red light. I would test them and they'd still be sitting around 3.9 per cell. Which is they still have plenty to go. I ended up buying 2 large 4s Reaction 5000 mAh 14.8V batteries. 1 at a time and they'd last 4x's longer, sometimes less and sometimes more depending on how I run it. Absolutely love the truck and just puzzled about my battery issue. I bought the Fox and I absolutely love it. Good video and just showing how good this truck really is, makes me feel just that much better about my new truck. I bought mine from Traxxas directly because Amazon wanted 739 for the UDR Fox and Traxxas had it for under 700 and they actually shipped it pretty quick to me. Very happy with new truck!
Traxxas has some amazing customer service. Relating to your servo. On my TRX4 My steering servo went out. I later opened up the servo and did a light soldering job on this fuse. Depending on how you look at it, Its in the middle length wise and closes to the ledge of the circuit board. Solder over the fuse or replace that fuse with a better one and the servo will be fine. I just soldered over lightly and my servo works great! That is the biggest problem with the Servo's failing. The fuse just isn't handling the power that it needs to and burns out pretty easy with many of these servo's. Traxxas was more then good to help me out with a grounding I had going in my truck and I feel bent over backwards to make the problems I been having right. Go Traxxas! :P
I know it’s been a while since this video debuted but I’m interested in buying one and wondered what your long term thoughts are on this UDR is now. Love your videos. Lots of info packed into your videos. Thank you sir!!
@Johnny Davis Thank you for watching and much appreciated👍👍 I got to say first, it all depends on your use. I have decided to keep this more of a scale truck than a straight on basher. I drive it on 4S instead of 6S. I limit how I take it off the ramps. I drive it in more of a scale like manner on loose surfaces. I truly do enjoy it in this fashion. For bashing I like the Super Baja Rey, the Baja Rey and the Mojave more. All three trucks handle the abuse better. Now if you are looking to do more scale and technical driving then I would pick up the UDR but for a basher I feel there are better options. Hope that helps.
I have this truck and I would totally buy it again, in fact I probably will get my brother one. The only thing is, just like any other RC company, they have their weak links.
Great review once again Brother 😂!!! That's good they did the price drop. 799$ is out of range I think for many RC enthusiast's. There's always a tipping point that will potentially turn people away. 🍻👌👌😨😨😨😎💪👊👊
Rich Duperbash Thank you brother 👍! I feel Traxxas just seems to push the envelope with their pricing but I think they got it right with the drop. 👊👊👍👍
@@ReadySetRC oh yes. I don't plan on skate parks or runs across a pond. Iv watched days of video on this truck. And after all the different truck iv gone tough. This is the one I need for my purposes. I enjoyed your video. And it was the last before I made my order. Now the wait game. Lol. Any recommendations on weak point or area to address before hitting the tracks? Keep up the great video. Thanks brother.
@@youtubeuserimgonzo7090 🤣😂Sounds like you know the UDR experience on UA-cam well. Durability for me was the lower links. They never broke on me but they did get bent up nicely. I went with RPM ones. I did not want to add aluminum on this. I rather the flex just want them not to deform. I kept the electronics stock. Servo is probably the weak point in electronics. It is a little slow but I don't mind it. I think it helps limit the rollovers. I would re-enforce the body around the mounting holes for the shell. Tends to be a little weak in those areas. Only other thing if you plan on running batteries outside of Traxxas, adapters get funky with the battery layout. Your going to enjoy this truck. There is simply nothing else out there like this unless you plan on building it yourself.
@@ReadySetRC yes sir. I took all your advice. Staying plastic but did grab trail arms I don't PLAN to bend anything. But we know what's going to happen. Eventually. I do thank you for your information. Iv never been happier with a purchase. The detail is incredible almost sad to put it in the dirt. Body mount hole do seem thin so I'm look for a solutions. The hardware shop seem the best for ideas.
I getting ready to purchase the Traxxas Udr and I was wondering what batteries you were running. Also does it matter if they are a soft case or hardcase lipo. Great video. Your input would much be appreciated. Thanks
@Frank Montoya Thanks for watching👍👍 I'm using two Power Hobby 3S 5200 lipos. Soft pack. I also changed the connection to xt90 on the truck. Got tired of the adapter hanging out of the back. If you are going to use the Traxxas connector on the truck and no adapter, your battery selection is going to be limited. Hope this helps.
I must thank your Channel for the great information I watched many videos about this and this was the one that finally convinced me to purchase this truck. It's now sitting in my living room. Iv chosen to go with the 6 cell and it's plenty powerful and fast. Anybody even wanting to run 8 cell is just nuts... The weight of the truck will be no mercy on your legs. So learn to jump fast. drive hard but respect the machine and it WILL impress the best of pros. TRAXXAS OWES YOU.
Hiya, I know it's been a while since your review, but I was just curious as to what you used to paint the tires on your truck? I've heard oil based sharpies work great but just wanted to know how you got yours so bright?
Vincent Smet Thanks for watching! Actually yes I did. I'm glad you noticed. I did not mention it on this video but did on the first run. I used a white paint Sharpie. Ordered from Amazon. You will have to reapply after runs but it stands out.
Seems like the udr and the baja rey are similar with regards to 4 link rear live axle, under chassis battery tray, body panels/cage. Just 1/10 vs 1/6 scale. Oh and the 1/6 traction rolls in grass more and has more scale detail
I realize that there is no way to compare this UDR to the 1/10th Baja Rey. BUT, I am curious if you could comment on just the “fun factor” of each. I know you love your Baja Rey. Is this UDR giving you $250 more fun? I am honestly just curious. Have no preconceived bias. Basically, I was going to buy either this UDR or the 1/10th Baja Rey. All I care about in an RC is fun, durability and $ in that order. So, in your opinion, how would you rate the fun factor of these two??
That's a good one😁! I'm very bias on the Baja Rey. I've been very public that it is my favorite RC. "Fun Factor" hummm. Putting a price tag on fun, never really looked at it from that aspect. To me there is not much I have as much fun as the Baja Rey. I would say if this is your first RC with a solid rear axle with an independent front suspension Baja rey is the one I would go with. Durability, I have not had a break yet with the UDR but the Baja Rey has taken more abuse and I replaced the upper links. Truly a very hard question to answer with my preconceived views of the Baja Rey. What does not help I just swapped out the servo and will be posting a video of the first run this Thursday 😁. For now I'm still saying the Baja Rey for fun factor. Let me see after a year of owning the UDR, like the Baja Rey and let's see. I'll make a effort to make a video after a year of owning the UDR to discuss the fun factor. Great question👍!
Thank you! I know I put you in a tough spot with that question. Really, I guess I was looking to see if your “loyalty” to the Baja Rey was any less after trying the UDR, but it wasn’t! Honestly, I was leaning towards the Baja Rey anyway. Thanks for your reply. Your channel is probably my favorite RC channel because I feel like you are reviewing and driving and commenting for you average, ordinary, everyday RC guy. I go to Willis Hobbies as well. That place is Awesome
I was just contemplating this exact question.. and actally commented on another video for a baja rey. He said buy a udr lol. I like the price of the baja rey it's a good truck for the price for sure and I have a rock rey that I thought about building into a baja but I could se the rock rey and throw some cash on top and just get a udr. My question was the same as yours is the 250 worth the difference or would the 250 be better spent on baja rey upgrades. Lol I'm still on the fence about it damn it..
@joseph 01 you have no idea😎 1.Remove the wheels. 2.Blow it off with an air compressor. 3.Give it a quick rinse. 3.Spray it with Green Works. 4.Rinse it down. 5.Hit it with air again. 6.Wipe it down with a microfiber cloth. 6. Spray it down with Deep Creep(avoid all electronics) 7.Let it sit for a day maybe two. 8.Wipe it down with the microfiber. 9. Reassemble. For wheels 1.Knock off all extra dirt. 2.Rinse them down 3.Spray them with Green Works. 4.Let them sit for a few hours. 5.Rinse them off. 6. Let them air dry. 7. Mount back on truck. That's in-between bashes. For maintenance, whoa😁
jklivin2007 I would not compare the UDR and the SBR. Just two totally different trucks gear to two totally different drivers. The UDR is geared more to scale realism. It can bash but I would not bash it as hard as the SBR. The SBR is a bashers truck. Not scale at all in it's current form but it can take a beating and keep coming. I really enjoy both trucks for what they offer. Hope that helps.
Awesome review my friend! It’s an amazing truck! Go over to JEC Racing to get the upgraded rear links. JEC is the only guy out there making stainless steel rear links! They are indestructible! If you make a video he will give you a discount! jecracing.com/collections/j-e-c-racing-products
Bulletproof RC Hey Keith, thanks for stopping by. I'm going to pick up a pair. It looks like he is out of stock until the 23rd but I'm going to get a set. Even though I like my TRX4 and 4TEC, I think this is the best RC Traxxas has come out with since the Summit. Thanks for the watching!
Does yours make a crunchy or clacky sound when you take off?mine seems to sound like the transmission is slipping until its up to speed then smooth sounding.any input would be awesome thanks guys love the channel
Know Nothing Rc Thanks for the support! No I have not experienced that issue before but I will pin this on the comments hopefully someone has and can speak on it.
Thanks for the help👍👍cheers
mine runs like a champ. Might need to get some grease in your UDR? I am thinking of doing that just to help keep the dust and water out of my rig. I hope you get it fixed! :P
Know Nothing Rc it sounds like it might be a diff pinion failure there might be a tooth that broke off and cousing it to click and crunch and skip a tooth under load
When I bought this truck I placed in my 2 2s lipo Floureon 7.4V 40c 6200 mAh batteries would last as a pair maybe 15 minutes. I ran 2 different sets with same results. However; the truck behaved like it was low on power and getting the red light. I would test them and they'd still be sitting around 3.9 per cell. Which is they still have plenty to go. I ended up buying 2 large 4s Reaction 5000 mAh 14.8V batteries. 1 at a time and they'd last 4x's longer, sometimes less and sometimes more depending on how I run it. Absolutely love the truck and just puzzled about my battery issue. I bought the Fox and I absolutely love it. Good video and just showing how good this truck really is, makes me feel just that much better about my new truck. I bought mine from Traxxas directly because Amazon wanted 739 for the UDR Fox and Traxxas had it for under 700 and they actually shipped it pretty quick to me. Very happy with new truck!
Saint Kenny maybe you have some resistance in the drivetrain causing your batteries to have to push out more current
👍👍
I do think it’s a great rig to own n it’s a fun one to drive, nice after thoughts brotha! 👍😎
STEVO D 313 Thank you bro👍!
Traxxas has some amazing customer service. Relating to your servo. On my TRX4 My steering servo went out. I later opened up the servo and did a light soldering job on this fuse. Depending on how you look at it, Its in the middle length wise and closes to the ledge of the circuit board. Solder over the fuse or replace that fuse with a better one and the servo will be fine. I just soldered over lightly and my servo works great! That is the biggest problem with the Servo's failing. The fuse just isn't handling the power that it needs to and burns out pretty easy with many of these servo's. Traxxas was more then good to help me out with a grounding I had going in my truck and I feel bent over backwards to make the problems I been having right. Go Traxxas! :P
Kenny Stroner Could not have said it better myself.👍👍
Great review brother. Looks like a fun truck. I need one to ramp it lol. Awesome video once again👍👍
Kenny mph Melanko Thank you brother👍😎 ! They are great trucks.
Got mine for 679.95 local hobby town USA hot racing got nice scale upgrades for suspension build for scale driving great review
Michael Stewart Thank you brother! How do you like it so far?
I know it’s been a while since this video debuted but I’m interested in buying one and wondered what your long term thoughts are on this UDR is now. Love your videos. Lots of info packed into your videos. Thank you sir!!
@Johnny Davis
Thank you for watching and much appreciated👍👍 I got to say first, it all depends on your use. I have decided to keep this more of a scale truck than a straight on basher. I drive it on 4S instead of 6S. I limit how I take it off the ramps. I drive it in more of a scale like manner on loose surfaces. I truly do enjoy it in this fashion. For bashing I like the Super Baja Rey, the Baja Rey and the Mojave more. All three trucks handle the abuse better. Now if you are looking to do more scale and technical driving then I would pick up the UDR but for a basher I feel there are better options. Hope that helps.
This truck is awesome!
@Hotdog in a banana peel Traxxas killed it with this one. Has to be their most scale truck to date.
Traxxas should cut you a decent fair check for this review that was perfect great job I cant wait to buy mine...
@Dennis Allan
Thank you sir, I could only dream to be so lucky. This truck really sells itself. Thanks for watching and the support👍👍
I have this truck and I would totally buy it again, in fact I probably will get my brother one. The only thing is, just like any other RC company, they have their weak links.
Lane Waite love the udr
@Lane Waite 👍👍
Great review once again Brother 😂!!! That's good they did the price drop. 799$ is out of range I think for many RC enthusiast's. There's always a tipping point that will potentially turn people away. 🍻👌👌😨😨😨😎💪👊👊
Rich Duperbash Thank you brother 👍! I feel Traxxas just seems to push the envelope with their pricing but I think they got it right with the drop. 👊👊👍👍
Great review bro, going to have to check out this truck in person at my local. Looks awesome. 👍👍
Galthain Thanks for watching brother 🤘👍. You will like it.
Nice review. Love this truck we have two. Doing some awesome upgrades on ours though. But yes the 2075x servo sucks. Lol. We upgraded ours to a savox.
LET'S PLAY RC! Thanks for watching 👍! Savox servo is a great choice for this truck.
Great review, very well done!
Mook Thanks for watching and the support!
Just ordered one. Heard nothing but great new about them
@UA-cam user Im Gonzo Super scale and good truck. Just need to go into driving it that way too.
@@ReadySetRC oh yes. I don't plan on skate parks or runs across a pond. Iv watched days of video on this truck. And after all the different truck iv gone tough. This is the one I need for my purposes. I enjoyed your video. And it was the last before I made my order. Now the wait game. Lol. Any recommendations on weak point or area to address before hitting the tracks?
Keep up the great video.
Thanks brother.
@@youtubeuserimgonzo7090 🤣😂Sounds like you know the UDR experience on UA-cam well. Durability for me was the lower links. They never broke on me but they did get bent up nicely. I went with RPM ones. I did not want to add aluminum on this. I rather the flex just want them not to deform. I kept the electronics stock. Servo is probably the weak point in electronics. It is a little slow but I don't mind it. I think it helps limit the rollovers. I would re-enforce the body around the mounting holes for the shell. Tends to be a little weak in those areas. Only other thing if you plan on running batteries outside of Traxxas, adapters get funky with the battery layout. Your going to enjoy this truck. There is simply nothing else out there like this unless you plan on building it yourself.
@@ReadySetRC yes sir. I took all your advice. Staying plastic but did grab trail arms I don't PLAN to bend anything. But we know what's going to happen. Eventually.
I do thank you for your information. Iv never been happier with a purchase. The detail is incredible almost sad to put it in the dirt. Body mount hole do seem thin so I'm look for a solutions. The hardware shop seem the best for ideas.
😃👍Great review.
Shen RC Thanks for watching Steve.👍👍
Cool review!
Remote Addicted Thanks you my friend!
I getting ready to purchase the Traxxas Udr and I was wondering what batteries you were running. Also does it matter if they are a soft case or hardcase lipo. Great video. Your input would much be appreciated. Thanks
@Frank Montoya Thanks for watching👍👍 I'm using two Power Hobby 3S 5200 lipos. Soft pack. I also changed the connection to xt90 on the truck. Got tired of the adapter hanging out of the back. If you are going to use the Traxxas connector on the truck and no adapter, your battery selection is going to be limited. Hope this helps.
@@ReadySetRC Yes. I appreciate your feedback.
Hi, can you suggest any OBA set that would fit the UDR? (i.e Will the ESS dual + fit?)
@G. Scud I haven't tested it but I did see a blog or video a few months back that showed it installed.
I must thank your Channel for the great information I watched many videos about this and this was the one that finally convinced me to purchase this truck.
It's now sitting in my living room.
Iv chosen to go with the 6 cell and it's plenty powerful and fast. Anybody even wanting to run 8 cell is just nuts... The weight of the truck will be no mercy on your legs. So learn to jump fast. drive hard but respect the machine and it WILL impress the best of pros.
TRAXXAS OWES YOU.
@UA-cam user Im Gonzo Thank you, those words are much appreciated. I could not have said it better, well said👍👍
Hiya,
I know it's been a while since your review, but I was just curious as to what you used to paint the tires on your truck? I've heard oil based sharpies work great but just wanted to know how you got yours so bright?
@Headbanger No worries👍 I used the Sharpie paint pen. You need to go after it a couple of times to make it bright. Also re-apply after every run.
@@ReadySetRC Awesome, thank you so much!
Did you paint the tire lettering? If so, what did you use? It looks amazing.
Vincent Smet Thanks for watching! Actually yes I did. I'm glad you noticed. I did not mention it on this video but did on the first run. I used a white paint Sharpie. Ordered from Amazon. You will have to reapply after runs but it stands out.
Nice video👍
Isaac Lyons Thanks for watching my friend.
Seems like the udr and the baja rey are similar with regards to 4 link rear live axle, under chassis battery tray, body panels/cage. Just 1/10 vs 1/6 scale. Oh and the 1/6 traction rolls in grass more and has more scale detail
yenny527 The UDR is closer to 1/7 scale. Totally agree, UDR tends to traction roll more on high friction than the baja rey and the SBR.
Ready Set RC oops I meant 1/7 scale for the udr. Got mixed up with the super baja rey at 1/6
yenny527 No worries 😎
Nice
👍👍
I realize that there is no way to compare this UDR to the 1/10th Baja Rey. BUT, I am curious if you could comment on just the “fun factor” of each. I know you love your Baja Rey. Is this UDR giving you $250 more fun? I am honestly just curious. Have no preconceived bias. Basically, I was going to buy either this UDR or the 1/10th Baja Rey. All I care about in an RC is fun, durability and $ in that order. So, in your opinion, how would you rate the fun factor of these two??
That's a good one😁! I'm very bias on the Baja Rey. I've been very public that it is my favorite RC. "Fun Factor" hummm. Putting a price tag on fun, never really looked at it from that aspect. To me there is not much I have as much fun as the Baja Rey. I would say if this is your first RC with a solid rear axle with an independent front suspension Baja rey is the one I would go with. Durability, I have not had a break yet with the UDR but the Baja Rey has taken more abuse and I replaced the upper links. Truly a very hard question to answer with my preconceived views of the Baja Rey. What does not help I just swapped out the servo and will be posting a video of the first run this Thursday 😁. For now I'm still saying the Baja Rey for fun factor. Let me see after a year of owning the UDR, like the Baja Rey and let's see. I'll make a effort to make a video after a year of owning the UDR to discuss the fun factor. Great question👍!
Thank you! I know I put you in a tough spot with that question. Really, I guess I was looking to see if your “loyalty” to the Baja Rey was any less after trying the UDR, but it wasn’t! Honestly, I was leaning towards the Baja Rey anyway. Thanks for your reply. Your channel is probably my favorite RC channel because I feel like you are reviewing and driving and commenting for you average, ordinary, everyday RC guy. I go to Willis Hobbies as well. That place is Awesome
I was just contemplating this exact question.. and actally commented on another video for a baja rey. He said buy a udr lol. I like the price of the baja rey it's a good truck for the price for sure and I have a rock rey that I thought about building into a baja but I could se the rock rey and throw some cash on top and just get a udr. My question was the same as yours is the 250 worth the difference or would the 250 be better spent on baja rey upgrades. Lol I'm still on the fence about it damn it..
How many times can someone say “In regards”? Good video otherwise.
@John Schwettmann I'm a New Yorker, we like to emphasize😆
Can you do the New Force Rc Epidemic next? Please!
FPV FANATIC Sorry, not much interest in that truck but JayTee has been posting up some great videos on truck.
What should I get? UDR or 1/10 losi baja rey?
SpudsTheBinky I'm the wrong guy to ask😁 I love the Baja Rey. It's my favorite RC.
No the price is unreasonable it's just a toy, a person can easily find more prudent things to spend money on.
@INFO MUTT The thing is none of us here are prudent😊 We all just big kids.
It is a DESERT racer, after all. Meaning it runs on lose dirt and sand. Otherwise it would be called a grass racer.
@Astral Eagle Yeah but not everyone has a desert to run RC's or even want to deal with the sand afterwards😊
How do you clean it so good?
@joseph 01 you have no idea😎 1.Remove the wheels. 2.Blow it off with an air compressor. 3.Give it a quick rinse. 3.Spray it with Green Works. 4.Rinse it down. 5.Hit it with air again. 6.Wipe it down with a microfiber cloth. 6. Spray it down with Deep Creep(avoid all electronics) 7.Let it sit for a day maybe two. 8.Wipe it down with the microfiber. 9. Reassemble. For wheels 1.Knock off all extra dirt. 2.Rinse them down 3.Spray them with Green Works. 4.Let them sit for a few hours. 5.Rinse them off. 6. Let them air dry. 7. Mount back on truck. That's in-between bashes. For maintenance, whoa😁
what's the tire paint model??
@Serpent 977e I used a Sharpie paint pen. I usually reapply after each run since I scrub and clean my wheels and truck.
how would you compare the UDR to the Super Baja Rey???
jklivin2007 I would not compare the UDR and the SBR. Just two totally different trucks gear to two totally different drivers. The UDR is geared more to scale realism. It can bash but I would not bash it as hard as the SBR. The SBR is a bashers truck. Not scale at all in it's current form but it can take a beating and keep coming. I really enjoy both trucks for what they offer. Hope that helps.
Hot mine for 670 but with tax I was at 730-740
@highridinf250 Not a bad price.
Awesome review my friend! It’s an amazing truck! Go over to JEC Racing to get the upgraded rear links. JEC is the only guy out there making stainless steel rear links! They are indestructible! If you make a video he will give you a discount!
jecracing.com/collections/j-e-c-racing-products
Bulletproof RC Hey Keith, thanks for stopping by. I'm going to pick up a pair. It looks like he is out of stock until the 23rd but I'm going to get a set. Even though I like my TRX4 and 4TEC, I think this is the best RC Traxxas has come out with since the Summit. Thanks for the watching!
Ready Set RC
You bet! Your channel is one of my favorites👍🏼