Hi everyone... sorry for not replying but I didn't notice the questions until now. 1. I use 23.5ct gold. The burnishing takes a lot of skill. If you try to burnish too early or too late after the gold is applied to the bole it is a disaster and the stone will scrape off the gold rather than polishing it. The water solution is 2/3 vodka and 1/3 water, and I sometimes add a tiny bit of diluted gelatine. Hope this helps! Ian
The problem is nothing to do with the carat of the gold but about the adhesion of the gold, and the length of time left to dry. If you leave it too long then the bole underneath becomes hard and so the burnishes scratches the gold very easily. When the bole is soft it is not a problem.
Hi. The yellow base is a mixture of clay and animal hide glue, and the solution which is a mixture of water and a little alcohol and a touch of the same animal hide glue, attracts the gold to the surface while at the same time re-activating the glue. Hope this answers your question. :)
Visit www.eliasicons.co.uk/our-lady-of-sorrows which shows the whole process. This course is free to view, and there are other options that are subscription based. Take a look!
pls could u sent me , how we make the ampoli -- with water or egg- the white- , and if u want pls step by step pls , i will wait u , aa im from Greece, thanks a lot , GOT BLESS U
I don't understand how the gold is getting like a mirror. We made a good armenian bole with leaf gold on it. But after polishing it isn't so shining as yours. And: I still see the corners of the leafgold pieces. What do we do wrong?
Mastering gilding takes a lot of practice! A lot of things contribute, how flat you can transport your gold to the surface, the quantity of glue in your bole, the temperature of your studio etc. So, its tough to advise you I am afraid! But persevere!
Aux Templar a gilded icon refers to any sort of gilding, that is gold applied to the icon whatever the method. Polished gold can only be done with the water gilding technique.
Hi everyone... sorry for not replying but I didn't notice the questions until now. 1. I use 23.5ct gold. The burnishing takes a lot of skill. If you try to burnish too early or too late after the gold is applied to the bole it is a disaster and the stone will scrape off the gold rather than polishing it.
The water solution is 2/3 vodka and 1/3 water, and I sometimes add a tiny bit of diluted gelatine.
Hope this helps! Ian
Thank you so much for your video! I have posted it on the Society of Gilders Facebook page as our video-of-the-week. Best, Elizabeth.
The problem is nothing to do with the carat of the gold but about the adhesion of the gold, and the length of time left to dry. If you leave it too long then the bole underneath becomes hard and so the burnishes scratches the gold very easily. When the bole is soft it is not a problem.
Hi. The yellow base is a mixture of clay and animal hide glue, and the solution which is a mixture of water and a little alcohol and a touch of the same animal hide glue, attracts the gold to the surface while at the same time re-activating the glue. Hope this answers your question. :)
got it!
When your forehead is too dry, you can rub a little Vaseline onto the back of your hand and use this...
Can you give us an exactly recipe for the yellow or red clay?
Parabéns
thanks a lot
When to start polishing gold with agate? how long after applying the gold?
hello do u use any kind of glue for the gold leaf? is that water? ty
I would like to see the process from the beginning
Visit www.eliasicons.co.uk/our-lady-of-sorrows which shows the whole process. This course is free to view, and there are other options that are subscription based. Take a look!
Visit www.arborvitaeiconography.com
What is the music playing?
Hello sir, What is mixed in red clay? rabbit skin glue or gelatin?
Did you paintng anything on the white icon area to protect the excess leaf during gilding?
pls could u sent me , how we make the ampoli -- with water or egg- the white- , and if u want pls step by step pls , i will wait u , aa im from Greece, thanks a lot , GOT BLESS U
can you use bolos instead???
I don't understand how the gold is getting like a mirror. We made a good armenian bole with leaf gold on it. But after polishing it isn't so shining as yours. And: I still see the corners of the leafgold pieces. What do we do wrong?
Mastering gilding takes a lot of practice! A lot of things contribute, how flat you can transport your gold to the surface, the quantity of glue in your bole, the temperature of your studio etc. So, its tough to advise you I am afraid! But persevere!
You can see a demonstration of the egg emulsion on one of my other videos here :)
Πού
@@basilisbasilakis785 take a look at the videos here: www.eliasicons.co.uk/tv-channel
Hi in the lillte bottle you have just water inside or you have mixed something else?
Αδαμαντια Μανιατη its 70% vodka, 30% water
Ian K Thank you!!
can someone explain the difference between a gilded gold icon and a gold polished icon? thanks.
Aux Templar a gilded icon refers to any sort of gilding, that is gold applied to the icon whatever the method. Polished gold can only be done with the water gilding technique.
Στην πρώτη, η χρυσή επιφάνεια γυαλίζει απο αρκετά έως και καθρέπτης, ενώ στην δεύτερη απλώς βλέπουμε τη χρυσή επιφάνεια χωρίς να γυαλίζει ιδιαιτέρως!
Διαδικτυακή Σχολη αγιογραφίας
your problem is not likely related to Carat
Hahahaha this is how white people painting Jesus white?