Honeywell evohome HR92 Radiator Controller Calibration & Testing | TheSmartThermostatShop.co.uk
Вставка
- Опубліковано 8 вер 2024
- Richard demonstrates how to calibrate a Honeywell evohome HR92 Radiator Controller and gives some tips on how to get the best from the product.
Honeywell evohome HR92 & HR91 Radiator Controllers are available to buy on our website here - thesmartthermo...
If you have found the video useful, buy us a Coffee - paypal.me/buym... :)
Great video very clear and helpful, thanks!
Very helpful. Thanks!
You're welcome!
THANK YOU LOADS MY RADIATOR WORKING NOW.🤗❤😘
GOD BLESS YOU 🙏🏽
Thanks, very helpful
That was super clear and helpful -- thank you! We have the HR91 in some of our rooms. I assume the process is the same (of course without the CYCL showing up anywhere)?
Yes, process is the same for the HR91, but when you twist the locking catch closed the same thing happens but you just don't know because of the lack of display screen.
We have HR91s throughout the house. I have tried tried to replace one for a HR92 but it appears to have a different baseplate so it's not as straightforward as I thought.
The HR91 and HR92 have exactly the same valve baseplate, so should be as easy as unclipping the one and adding the other.
Hi. One of my radiators isn’t switching off. The black hand wheel feels stiff. Can I simply remove and clean? Is it safe to apply a little WD-40?
I wouldn't apply WD40, it sounds like you need a new valve base plate. We sometimes get them come up for sale here (thesmartthermostatshop.co.uk/product/m30-x-15mm-valve-base-plate-for-honeywell-hr92-radiator-controller-50064648-001/) or contact Resideo and they may be able to assist with a replacement on 0300 130 1299.
Hello, a few of my HR92 controllers are not opening the radiotor valve in the right way. When requesting heat from the boiler I can hear the HR92 opening the valve a bit, but no warm water if flowing through it yet. It seems that only from around 30/40% opening warm water starts flowing. So the results is that the HR92 keeps requesting heat, but the radiator will never heat up, because the valve is not opening (enough). Is there a way to calibrate this? It is a new valve, the pin easily pushed in and coming out again and I calibrated the wheel as in the video.
Its normally poor quality TRV valve bodies (with rubber plungers/stoppers) that cause this issue. My advice would be to fit HR91's and HR92's to decent quality TRV valves such as these (thesmartthermostatshop.co.uk/product-category/honeywell-home/radiator-valves-honeywell-home/). If radiator valves are over 15 years old, they should really be changed. More info here - thesmartthermostatshop.co.uk/radiator-valve-compatibility/
Hi A few weeks ago I found that one of my HR92 Radiator Controllers in a bedroom, was set at 35 degrees way above what it was programmed to be at. I manually set it to the temperature it should have been and it appears to have worked correctly since. My wife and I are certain that we did not accidentally touch it. Last night I found that the the controller in the bathroom was displaying a lite and later found that it was set to 35 degrees, so I manually reset it. After lunch today I again found it set to 35 degrees and with the manual round symbol displayed, even though we has not touched it.Can you advise what might be causing this and how to fix it. I have now, after watching your video, recalibrated both Controllers, the bases of both were turned quite hard in a clockwise position and I have now rectified this. The valves ar nine years old. Many thanks in anticipation.
Hate to say it but this is a tech support call to Resideo - 0300 130 1299
You ave the info on the display 180 degrees rotated. How? I can not find this setting.
This model is built for the UK. The European model has the screen 180° the other way around.