10 Ways to Joint Wood for Beginners / Woodworking Tips & Tricks
Вставка
- Опубліковано 9 лют 2025
- 1. Wood Glue & Nails
2.Wood glue
3. Dowels Point & Dowels
4. When there is no dowel point
5. Screws & Plugs
6. Pocket hole jig
7. When there is no pocket hole jig
8. Dowels
9. Spline
10. Spline 2
Thank you for such a helpful video. I no longer have a "honey do" and I feel intimidated by tackling certain projects. Your video has helped me gain the confidence I need to face them!!
Thanks!
Thanks for your interest in the video. Super Chet is more grateful. 😁👍
이런 생각을 해 봅니다🤔
우리가 너무 획일적이며.
규격화된 사고와
생활의 편리함만 추구하고 살고 있지 않는가?
사고의 다양성
만드는 과정에서 느끼는
기쁨과 행복
비교되지 않는 소중한
존재의 가치,,
남편장이님은 .
행복한 사람입니다🌈
좋은 말씀 입니다.
어쩔땐 마음에 안드는 결과물도 있기는 하지만, 성취감도 있고, 세상에 없던걸 내손으로 탄생시킨다는 기쁨? 같은 것도 있네요.
항상 시청해 주셔서 감사합니다.😁👍
Hello, from Brooklyn, NYC. I can honestly say, most woodworking tips/hacks on UA-cam are not as thorough and straightforward as yours. I can tell you take a lot of pride in your work. Great music! Stay safe and be well.
Thank you for those kind words.
As a hobby, I do carpentry in a small shed behind my house.
The methods in the video may not be perfect, but they are helpful when making furniture or props for use at home.
Thank you for watching my video, and I hope you will always be filled with happiness.😄👍
Thank you for going through the trouble and process of showing in detail how to join corners. I will be making raised beds this Spring and don’t have any of the fancy tools after number 8-just the basic ones. This makes me feel like my projects are doable and that I can do it on my own. What a relief. Your video inspired me. And I so appreciate all the detail. It’s the first one I’ve seen where the detail is given with such precision. Thank you, thank you, thank you!😊
너무너무 좋은 영상.
저는 5ㅇ대중반 여성 입니다.
목공을 취미로 너무 배워보고싶어서 여기에도 기웃거려봅니다. 소품 만드는 재미에 밤잠 설치고 있어요.영상 감사합니다.
너무 흥미있게 잘 봤습니다. 도움 주셔서 감사해요
유익한 영상 감사합니다
Капитальный красавчик!!! Вы помогаете людям, берегите себя!
Amazing thank you. I am just starting off on my woodworking journey, and this was so helpful!
Very clear and thorough instructions !! Much needed, thanks a lot from Greece !!
I'm glad I finally found a carpenter who knows how to use wood glue! Every video on UA-cam the people glob the crap out of the glue making the sanding take 20+min. If you use the perfect amount there should be little to no drip.
Thank you for your valuable comments. I am still researching to adjust the amount of glue properly. As you said, if you use a lot of glue, you will spend a lot of time sanding. However, if you use too little, the adhesive strength will be weak. Thanks for watching. happy new year.😁👍
Yes, you only need a thin layer of glue on one surface. Spread it evenly with your finger and wipe off any surplus with a damp cloth. BYW, don't use a hammer on wooden dowels, use a wooden or rubber mallet.
Thanks for the tips.. but no beginner would have these tools 😂
Спасибо за интересное видео ! Мне последний вариант нравится, классно смотрится ))
Спасибо за хороший взгляд. Я надеюсь, что вы всегда полны хороших вещей.
The last method looks nice!👍
Good job 👍👍👍Thank you
Good instruction. Great job. Greetings from Poland.
Dzięki za oglądanie.
szczęśliwego Nowego Roku.😁👍
@@handy369 Dziękuję i wzajemnie.
Восхитительно и полезно!Жаль немного с опозданием увидела ваше видео-уже успела неправильно собрать консоль,но теперь всё получиться как надо в следующей работе с деревом!!!!!!!🤩
Надеюсь, у вас хорошие результаты.🙏 Спасибо за просмотр видео.😁👍
알기쉬운 내용 유익하게 잘 보았습니다. 감사합니다.
시청해 주셔서 감사합니다 😃 항상 좋은 일만 가득하시길 바랍니다.
Wooww..!!! Amazing.. nice work 😁👍👍👍
Thank you for a good look. I hope you are always full of good things.😀👍
Thanks! I am a beginner here and working on my retirement plan. Just putzing around the garage.
nice to meet you I am also a beginner in woodworking. I do it as a hobby in a small warehouse at home.
I'm not retired, but I've sorted out my city life and moved to the countryside. I hope you are healthy and full of good things in the new year.
Thanks for watching 😄👍
Very interesting ideas. Thank you
Thank you for your good rating. I hope you are always full of good things. 😁👍
또 보고 자꾸 보고 신기신기 잘 배워가요~감사합니다 ~
시청해 주셔서 감사합니다 😁👍
Muy bueno para principiantes, como lo soy yo....!! Gracias..!! Saludos desde las sierras de Córdoba Argentina...!!! 👍👌💪🇦🇷
¡Ay, Argentina! Felicitaciones por ganar la Copa del Mundo.👏👏👏😁👍
Gracias por ver mi video Que siempre estés lleno de cosas buenas 😄👌
@@handy369 Gracias por tus deseos Handy, igualmente para vos....!!! Y lo del fútbol, también estuvo bueno, viví mucho más de cerca ( por mí edad en ese momento) el mundial del 86'....!!! Ya he visto muchos de tus videos, muy lindos todos, felicitaciones y gracias por compartir tú tiempo y conocimiento...!! Abrazo....!!!
Thank you so much!!! I’m starting a small wood hobby project ( hoping to sell) small pieces- this was the best straight forward video for me to understand: I have no experience so this is great. 👍
0:00 - 1. Wood Glue & Nails
0:20 - 2. Wood glue
0:42 - 3. Dowels Point & Dowels
1:18 - 4. When there is no dowel point
1:46 - 5. Screws & Plugs
2:38 - 6. Pocket hole jig
3:15 - 7. When there is no pocket hole jig
3:44 - 8. Dowels
4:40 - 9. Spline
5:22 - 10. Spline 2
Спасибо, добрый человек!
Which method is the strongest joint?
Excenlente tutorial, gracias por compartir tus conocimiento, saludos desde caracas -venazuela
Very practical and educational skills, which make jobs easier, faster, and very accurate.
Thanks, too many videos pretend to show tips and use techniques quipment only the pros would have... but these are really useful to a newbie like me.
Would love to see a method to do splines without a fancy table saw that many of us beginners wouldn't have.
You are a big master 👌. Thanks so much
Wow~ thanks for the comment that makes me feel good. I hope you are always full of fun things.😁👍
Molto istruttivo! Grazie,! Thank you very muce.!
Thumbnail picture is perfect. :D
😃😃👍👍
I worried a lot.
Thank you for watching.
Great job.
I would say the internal dowel, number 4 is the neatest strongest method of all of these especially for something that will be outside
simple is best😁👍
Great presentation. Thank you for your time and effort to make this video and share your knowledge with us. Greetings from Croatia
Your comment made me feel better. Thank you for a good look. Happy New Year.😁👍
知ってはいるものの、ためになります。Good！
Muito bacana as dicas e muito úteis foi uma ótima apresentação e muito boa à demonstração valeu obrigadao
Thanks a lot, the dowel point and the nails used for dowels are very new to me , thanks again.
목심 만드는 기계는 비싼가요? 초보자가 사기에는 부담이네요.
좋은 영상 잘봤어요❤❤❤😊😊😊
구독하고 좋아요 누르고 갑니당.😊😊
우선 대패랑 조각칼을 구입했는데요.
전동드릴은 있구요.
Todo Estos Videos Son Muy Interesantes..Aprende 1 Muchas Cosas..Y No Se Muere 1 De Hambre X Ignorante...Algo Aprende Hacer..Gracias Y Que El Dios Del Universo Te Ayude Mucho..Anrazos Desde Colombia...Salutes From Colombia With Love...😇😇😇😇😇😇😇
Encantado de conocerlo. Gracias por tu interés en mi video. Espero que siempre estés lleno de cosas buenas.🤩👍
Есть чему поучиться молодец.
1:25 that is great!
목심 아이디어 good ! 정말 직각 안맞아 애먹었는데...한수 야무지게 배우고갑니다.
좋게 봐주셔서 감사합니다.😁👍
4rr4rt
Very good idea...👍👍🤝
@@handy369😅😅 1:14 1:19 1:21
2B😂
which one is more solid ?
Thank you - I enjoyed this a lot!
Ide2nya cemerlang saya suka orang seperti anda terimah kasih sheringya pak
Terima kasih atas penilaian Anda yang baik.
Selamat Tahun Baru.😁👍
Después de ver muchos videos sobre como trabajar la madera, este era el vídeo que buscaba. Un vídeo preciso que simplemente mostrará cómo pueden ser las uniones entre listones de maderas. Muchas gracias y ahora puedo elegir cuál es la unión que me resulta más cómoda o efectiva para mi trabajo. Saludos desde Argentina.
Me alegro de que lo hayas encontrado útil.
Te deseo buenos resultados.
Feliz año nuevo.😁👍
구독했어요^^♡
😊 merci beaucoup
Nice video! For anybody doing woodwork, it is better to use more glue than you might think you need. The most common type of joint failure is glue starvation, meaning not enough glue was applied. Clamping, screws, etc., take care of the excess glue. A wet rag can clean up the mess. As one improves, you can cut down on the amount of glue. In a joint, the edges do most of the work, so it is important to make sure that glue is spread throughout.
I know there will be a keyboard warrior out there who will say, "Actually, the thinner the better because a one-molecule-thin layer of glue bonding wood to wood is theoretically the strongest." They would be right. But in woodwork, it is extremely difficult to get a perfect joint like that because of the nature of wood. A cut piece of wood will have surface height variations even if cut perfectly. When there is no squeeze out, you can't guarantee the entire joint was coated.
Anyways, I digress. Use a good amount of glue and enjoy the craft, everyone!
Thanks so much
Would you make a video testing the strength of each one?
Please
There is a video on the UA-cam channel already
Truly amazing
Great......... thanks for sharing..
Спасибо 🤔!!!👍👍👍💐🤗
Спасибо за просмотр.
С Новым годом.😁👍
Ottimo grazie
대박이구만요^^
excellente vidéo, très utile, une vraie pépite !
Merci pour un bon coup d'oeil. J'espère que vous êtes toujours plein de bonnes choses. 😁👌
Спасибо мастеру ,однозначно полезное видео! Но приспособление для изготовления дюбелей дно, уж извините,но так и есть. При наличии сверлильного станка,на металлической пластинке от 5мм до 10мм делаются отверстия диаметром от 6мм до 16мм, а рядом с двух сторон делаются отверстия меньшего диаметра и стенки подрезаются(оОо) и у вас будет на всю жизнь удобнае приспособление. Есть достаточно видео, у меня такая, себе сделал. Очень удобно. Маленький брусочек от 16 начинаешь затачивать и до нужного диаметра,быстро и удобно. Уверен за малую сумму в мастерской с нужным станком такое сделают, однозначно стоящая вещь.
Спасибо за совет. Как вы сказали, я планирую использовать его сам. Вы увидите, что я делаю в следующем видео, которое я делаю.
Пусть ты всегда будешь полон счастья.😁👍
good jobs
Very helpfully. Many tks
Thank you for your valuable comments.
I hope you are always full of good things.
I hope this video helps.😁👍
Thanks for this video, may i ask, for 3. Dowel pins. What magnetic tool did you use? I tried using google image search but nothing.
You can search for dowell points on Amazon. The magnet is a neodymium magnet.😄👍
Very useful video btw, thank you very much!
Спасибо! Ещё бы замерить все эти соединения на отрыв или нагрузку на угол.
Thank you! Another would be to measure all these connections for separation or load on the corner.
Спасибо за просмотр.
Я буду ссылаться на то, что вы сказали.
В другом видео замеряли, самое крепкое - саморезы под углом 😊
Which one’s the strongest? Please
안녕하세요 본드로 접합한 가구를 분리,해체 하고 싶으면 어떤 방법이 있을까요? 집에 큰 가구가 있는데 본드로 부착된건지 나사는 보이지가 않습니다ㅜㅜ 무게가 많이 나가 해체해서 버리고 싶은데요ㅜㅜ
아마도 본드로만 접합하지는 않았을 겁니다. 피스를 사용하지 않았다면 도웰핀이나 비스켓 같은 나무 못 계열을 안보이게 사용했을 거예요.
이런때는 충격을 줘서 분해하거나 자르는 방법밖에는 없습니다.
잘 봤습니다 다음에 각 방법 강도 테스트 부탁드립니다
네 참고 하겠습니다 😁👍
Wieder ein tolles Video
Kannst du mal etwas mit Landschildkröten kreieren?😊
Супер полезное видео!
Which One Is Strongest ?
Last One
Spline Joint
Great! but i think you use too much gorilla glue, that glue is so strong and you only need a little bit. Nice simple video, thanks :)
Thanks for watching.
I think so too.
I changed it this time, but it was a bit different from other glues.
Thank you for your valuable comments😃👍
Thanks a lot for the very nice overview.
At No 9. I think the grain direction should be rotated 90°. Much stronger.
oh wow, 😮 that's a good comment.
You have the power of observation of Sherlock Holmes.
Thanks, I learned one. thank you.😁👍
Excelente tip y bien esplicado, felicidades y un abrazo desde Ecatepec de Morelos Edo, de México
Amazing video. We would like to show this video on our channel with your permission. We will add your link and your name will also be mentioned in the video. Let us know what you think
Gostei do vídeo
안녕하세요. 목공 초초초보자입니다. 여러가지 방법 소개 감사합니다. 다른 건 잘 못 하겠고 나사 없이 목심으로 조립을 해보려 하는데요(사다리 형태) 혹시 목심이 강도가 약하지 않을까 걱정되네요. 강도 측면에서는 나사가 더 나을까요?^^;;
나사 보다는 목심이 더 튼튼 합니다.
목심 보다는 목공본드가 더 튼튼하구요. 그래서 대부분은 목심과 목공본드를 같이 사용합니다.
@@handy369 빠른 답변 너무나 감사합니다. 용기 내서 목심으로 해 보겠습니다^^
Номер 9 - гениально! По-русски это называется соединение на ламели.
using glue is it working also for objects used outdoor?
of course. However, you must use exterior glue. Tite bond 2 is mainly used.
나무못 8미리 짜리 박을때
드릴도 8미리로 뚫어야 하나요?
0.1~0.2미리 작은걸로
뚫어야 하나요?
Thank you very much. Very interesting ideas. However how is called the tip that I see at 1:50 and where I can find it?
It's called a double drill bit. They are also sold at hardware stores. You can also buy it over the internet😁👍
Beautiful
🤩👌👍
3:30 Когда нет приспособлений, прям хорошо, удачно.
5:11 Тоже занятно между штук вставлять.
Спасибо за интерес к видео. Надеюсь, у тебя всегда много хорошего 😁👍
Very useful video…. 😍
Your comments are also very helpful to me.
Thank you for your valuable comments.😃👍
Ini adalah trik menyambung kayu yg keren...👍👍🤝🇲🇨
Terima kasih sudah melihat dengan baik😄👍🤝🇰🇷
The best way to assemble the bed without assembly assembly
Strength test revealed:
Glued 45-degree joint is the strongest. I couldn't believe it. There were all kinds of fancy joints in the lineup.
Qual o nome do equipamento que fixa o prego na madeira do preimeiro video, por favor?
Отличное видео!
Спасибо за хороший взгляд. Надеюсь, у тебя всегда много хорошего 😁👍
great but the glue should be put on the hole not on the pin so that the insertion of the pin distributes it correctly. By putting it on the pin most of it comes out
Thank you for your valuable comments.
I will take note.
I hope you are always full of fun things.😃👍
EXCELENTE
😁👍
How would this work in 3D?
좋은 영상 감사합니다!! 나중에 유용하게 써먹을 것 같아요😎 손 다치지 않게 장갑도 착용하셔요ㅎㅎ 뭐니뭐니해도 안전이 우선입니당😊
한국분 댓글은 오랜만에네요. 반갑습니다. 관심 가져 주셔서 감사합니다. 😁👍
应该试一下哪种连接强度高点。
Видео отличное, но - обработка для начинающих, а откуда у начинающих такое количество спец.инструмента - дисковые пилы, станки для производства шипа - они же начинающие, у таких если только электролобзик и немного ручного инструмента. Но часть идей возьму на вооружение.
Hay a ơi
A very good
Superb thanks
thanks for watching
happy new year😁👍
Great! Thank you!
How to joint wood for beginners *proceeds by whipping out incredibly complex professional tools*
Спасибо! Простые и действенные способы крепления. Люблю с методы сплайнов.
Does anyone know which one is the strongest?