P1 : Bedini 10 Coil Testing... flash back from 2017
Вставка
- Опубліковано 24 вер 2020
- Well Boys & Girls, I have been Very busy lately. So i thought i would dig up some old footage i had on my backup hard drives...
This video series will be a lot of fun to unravel. It will take a bit of time to get through all the footage. But we will take it one step at a time.
If you would like to see all the live footage from this time it is here:
• 10 coiler
if you want to see that play list i was talking about... you can see here: however... I'm not promoting this work, only giving you references for your own good...
• Selfish Unthankful Cir...
These videos are for education only. These videos are not to prove anything or disprove anything. These videos are to show you my results... when i tested the 10 coiler unit...
God Bless,
~Russ
www.rwgresearch.com.
for those who care:
Thank you for all your support! Here, we take it one day at a time...
For donations to help keep things going...:
My bitcoin address. : 1A4XGLmjQqZ5nzKHmqo4DpNsCXWufsCdpd
Patreon
/ rwgresearch
You can also just use PayPal if you'd like here:
rwgresearch.com/donate-to-rwgr... - Наука та технологія
Thanks for sharing these Russ! I am looking forward to hearing your analysis of these systems.
thumbs up for russ. the energy videos are what got me to subscribe years ago, and i am still here.
Thank you Russ just love seeing people work on stuff trying to understand things.
That wouldn't surprise me...so many charlatans, and disingenuous opportunists in the 'free energy' community.
very tempted to comment...
Ok, a neutral comment:
seems like regenerative breaking, Able to recover energy but still looses energy from friction. No gain.
Impulses (flyback, back emf or inductive spike) are the key, but we need some more steps to get a gain from the ambient aether.
starting with Impulsed series resonant primary.
Still researching this myself. Right now with a IGBT (no body diodes) half bridge circuit.
Seeing this video reminds me how much I miss watching you experiment! It’s like you dug out and old song! You rock!
Great! Bedini is probably my specialty and definitely my favorite. Not going to make much comment on the techniques and things as you clearly explained that this is a learning series recorded for your own notes. The system is much more complictaed than any of us realize when we started. Many people never get very far because of the counter intuitive nature of the system. 👍👍
Do not forget the Robert Adams 800% overunity model.
Bedini models builded on Adams circuit principles.
THUS Adams & Bedini's combination in my research and development, is an outmost WINNER for real and FREE energy.
I PROOFED IT MYSELF with my very first unit, that runs super smart with input of 700W and output of 2.3KW.(2300W), extremely overheating in 15 minutes.
These overheating was later solved with frequency input that cause the system ran smoother and ice cold, when resonance was reach.
What I also found, is when it reach resonance, the system automattically keep and control the rotor speed automatically in the output voltage limit of say 230VAC output.
Then I further found that with a inner star winding circuit, and 3 wire bifilar winding, with six points connections per coil of 3 wires, managed a NON-DRAG generator, when increasing the load, the smoother and higher output were gained.
I could not get a NON-DRAG working unit from a outer running rotor with DELTA connections.
IT JUST DID NOT WORK!!!
Thanks for documenting this. Upon completion, I want your opinion on if these are really worth the effort. I know that Rick has changed the circuit going to mosfets. I actually did the same thing as you 10 years ago. I made an 9 filer coil with the trigger in the same coil and order Ricks 8 transistor board. Did the typical bedini bicycle wheel. I love experimenting with it. I have a 24v 800ah battery bank that I wanted to use it with. Thanks!
Thanks for experimenting again!!! Don't worry about the people who get angry and spout out a bunch of negative words. They don't matter, what matters is that the large majority that loves and learns from you.
😂😂 no es enfado,es vuestro fanatismo por los juguetes obsoletos del tal Bedini ¡Menudo personaje vendedor de falsas ilusiones! Cuya verdad y secreto no lo dirá a cambio de mucho dinero ,sigan su jugute tan caro
I am kind of excited about this my brain kind of needs a stimulation so thank you for putting these out
This will be some great videos .
lol, this takes me back memory lane.
That was cool man, looking forward to more :)
Fella, could you tell me who made copper rings inside a ring with neo magnets that would spin around and make electricity ?? What is the name ?? Thanks
Hello Russ. I am from Kazakhstan. Thanks for your videos.
Thank you for taking the time to put this on UA-cam. There are a lot of people that are just now getting into this that will appreciate it. I've been with you about eight years now. And I appreciate all your research and all of your videos over the years!!!
quel jolie travail, avez vous des plans pour cette machine ?
Well done and neat.
I like it.
My nine coil and eight pole rotor, where coils winded 1000 turns 3 strain bifilar per coil, running as a 3 phase sensorless BLDC motor driver and generator with successfull overunity gain.
Are all the coils wound in the same direction i think you would get a biger out put if the oposit coil would be south since they are all north and wound accordingly .
Great work you’re doing !
Hi,
👏
Please could you tell me how to build or get such a wheel with magnets ? Could you share 3D structure design plans ? Regards
I learned about Mr Bendini back in 2007. He was just making the 10 coil kit available. I made a promise one day I would acquire an attempt to make use of it in the way we all want to. Now that I'm building a diy ev, my buddy asked, "do you plan to add that free energy motor to it"?
We went back and forth for 20 seconds trying to spark my memory and then I remembered. Our SGG conversation was over a decade ago. So here I am researching again. I found out about Mr. Bendini past away. Such a loss. RIP.
Complimenti !
Nice device. I built a single coil unit a while back with beta matched transistors and experimented with other variations without relative motion. According to Tom Bearden the abruptly opposing and collapsing magnetic fields change the local density of 3D space. Zero Point Energy is constantly flowing orthogonally ( at 90 deg) across 3D space in time domain and this change in the local density of space produces the transient voltage inflow.
Great intro video russ
First of all, Thanks for sharing. Just wanted to make an observation, because there are many Bedini machines out there, made by enthusiasts like you, me included. But the point is, (even though Bedini has talked about it in his book on battery swapping) I haven't come across a Single machine that can Self Run, without any support from the local mains supply. The machine I made, was a dual coil version only, but I never got to get it to self run. In this machine, since you have so many coils, I think you can do it without difficulty. The charge battery, under these charging conditions are supposed to reach a minimum of 15.5V but 16.2V ideally, before they're swapped over as a run battery. If this happens, you can surely self run the machine. Another hint from Bedini is that the batteries need to be big (AH) to take advantage of the charge energy coming in. He points out that the total plate surface area inside the battery, has a lot to do with it.
Try energysing the coils in a north south configuration with diodes on each 2 pairs so the energy goes one way only you should get over 400 volts out of your system.
Can you tell me what is your most memorable learning lesson from this experiment Russ ??? Bedini was supposedly an electrical genius. Nice video too.
This is more like my type of video. I almost purchased one a few years ago. Rick is kinda, I don't know. I wanted more info on it. Never did buy one.
many years did not see.
Hooray! RussRWG started experimenting again!
no he didn't.... this is old footage as he says in the description...
Urgg
Dose anyone have the link to Rick Fredrick?
Is he still selling these?
Excited to see these again!!!!
DO YOU STILL USE this device ?
What do I think it is?
How can I buy one?
Sangat menarik pembahasan tentang bedini
Hey russ! Are you still building?
Its been a while😊
Hi Russ. You should checkout Paul Babcocks presentation called "Aircore vs Ironcore - They are all the Same". Basically 1200v Sic ( Silicone Carbide Diodes ) Mosfet's, TVS Diodes, 48v run battery, 48v charge battery and Rich Friedrich's Double Pole - Double Throw Battery Swapping Circuit. Battery swapping takes place at 3 minute intervals. You seem like a genuine researcher so it's worth your time. Good luck sir.
I didn't see the charging current test, did I miss something?
Pt. 5
use chopsticks for the fly.. Hopefully it doesn't live as long as the energy in the PMH you tested 2 years later. Anyway, while I'm here, have you ever wondered what type of magnetic vortex is happening with the PMH? I am going to try messing around with mine to see if the oscillating flux will drive continuous movement in a magnet suspended by a shaft. I would imagine the magnet if spun inside or next to the core may continue spinning at no cost to itself. If this can happen, could be take advantage of the energy by induction from another core left close to the other side of the magnet, say maybe a magnetic disk, so there is not lenz effect from the first core. If that can happen, we may be able to recreate steven mark's coil. I'm betting that is how he induces this energy because it is pretty obvious the rotation may be produced by the earth. Let me know what you think. Thanks, Marc
In DC frequency is 0 in your video at 12.08 you said 100KHz from DC.
YAYyyy
Salut jai besoin de votre aide pour me trouvé des aiments svp aider moi merci.
Just 1 advice study the metadyne multi polariti Coil set up transformer/converter/generator it works preaty much same principle if you would take ordinari 220/12v transformer and latch pins together 208+,208-,232+,232- exampel use ordinari virtual ground relay to compleat cirquet .Or compound dc motor so meaning guy you change magnet pole faces shape or reduce/increase north/south at %{% ratio that is the Metadyne effect also known as Tesla's Methode Of Conversion.So you can have ac and DC pulses in 1 brush even tought they are delayed hrz frequency and angular momentum so that would mean for dual out put wire you need dual load circuets who absorb excess currents by their polariti .So no electrons no protones just logic like ordinari transmision would work In ratios . That is called virtual created plates or Electriciti if you swap around magnets ration in unusual fasion . You get ither generator ,motor,converter ,transformer as an result or multi out put to individual brushes .Normal starter motor can do that ferrite magnet type with SR type starter solenoid so brake them ,heat them,de magnetise them or swap them around magnets you will see instantli effects and commonli this out put +-,-+,++,-- of course depends on the scenario. So that's what they mean by spliting the + or spliting the - virtual created potential is created by Variabel relays .In fact multi strokers,dual fueling engines,dual engine types function similar fashion not only the tripler set metadyne who is used by electric trains,it is not necesari to mention 2-3 different baterry type chargers Tungar,wacum tube baterry chargers similar . So that is your answer,I won't go in to serries/parrarel brushes,looping coils in armature ,or pole peace and lamination combinations all of that is written + you still could use slip,split and commitator seperate units any way .There you go that's the Bedini generator but originali its the Metadyne .
Thank you for this posting Working on an SSG project my self, was beginning to think this was a forgotten science..
I improved the designs. No magic behind it at all. You don't need a big a. motor to charge batteries. My last video shows how it's done right.
A new energy adventure!~~~ YES!!! :D
What if...
Bedini didn't want us to know the whole truth. And told us all about the back EMF.
While actually, to make it work...
you need the "front" emf...
a really fast and short turn on of the bifilar coil, creating an overshoot that charges the bifilar coil capacitance from the ambient medium.
(due to the coil reactance being high at the start, while the coil capacitance reactance is low at the start)
.....so this is another approach into perpetual motion. There's an endless stream of gadgets for it in the 1920s n 1930s Popular Science magazines .
In theory you can set one up to alternate batteries and take turns driving or charging and I understand there are people out there that have kept theirs running continuously for many years without any outside power.
Doing a lot of extra battery charging in the process.
What is it
👍👏
EV manufacturers need to incorporate this design directly into their motors
I wonder if a fly refers to us as a walk ? Look at that walk just walking around in here , I'm going to fly around that walk and annoy him a bit !
You are not there unless you understand his full patent 6,545,444☝️☝️ you need to know how a multi-coil works as opposed to a single coil, both work in different ways, also each is specific to the type of load it can cater with COP>1.
19M vw prx since 06
If your child is five, and there are thirty years supply of crude oil left on Earth, what do you think may be the best answer? Algae Fuel? Or put two wind mills on the front of a plastic, stainless steel frame EV?
320v....20a......?????? = ????
🙏❤️🙏👍🙏🤪
Meanwhile the second Law of Thermodynamics still rules the Universe.
en.wikipedia.org/wiki/Second_law_of_thermodynamics
No actually it doesn't. The problem is the design of the unit. I've been past the laws.
@@JF32304 Sure you have
@@Cracked1ce haha I would get off his channel. You're one of THEM. You are the kind of person who has zero idea of how to get past the "laws". Zero imagination.
@@JF32304 so you imagined that you achieved overunity? Makes sense
This is a video of a free engery device that didn't end up making any free energy. But so far there are 4 people in the comments that have made free energy. Apparently free energy is super easy and dont worry I screen shot there comments and will go to there channels. I am going to start making videos about uneducated at home engineers and there insane belief system lies. 4 subs of this guys has made free energy but not the guy that has the channel but his subs. Lol
En 2017.. ok...
North south oposit to each other.
...
What'd he say?😂
A bedini motor is a mechanical joule thief
Boy I'm/my company is working on some stuff that blows the doors off Bedini tech.
Sure you are
@@Cracked1ce no I really am. This is old tech.
@@JF32304 *tech that doesn't work* and yours doesnt either
Are you working on resonance?
Could you elaborate?
reed the bibble? I use it for toilet paper
77 commentaires...
Blablablablablabla......!!! 320v...'? 20a....?
I've built 3 different Bedini configurations, and I have thoroughly enjoyed the research. I did achieve greater than 100% coefficient of performance with one of them. It was grueling work, but it was very rewarding.
If you indeed made an over-unity device it would be ground breaking and the first one ever created. It must now be thoroughly tested by an independent laboratory. Take it to a University and have them check in out. That's the way real science is done. Work is always peer reviewed and independently validated. If you have not done this your claim is just hot air.
Can you share what you did?
Nice :) Hopefully you were able to boil some of the successful actions out of it and make it easier for yourself to replicate and if you are sharing, easier for others too !
@@William_Hada you don't get it. Those labs will automatically say it doesn't work and will NEVER test it because it destroys their foundation of education.
@@JF32304 No They wouldn't just refute the claim. Universities would use it as a teaching tool for their students. Take the EM Drive for instance. Nasa and tons of other labs spent countless effort, time, and money into researching what generated the thrust. If it truly was generating thrust, It would have been revolutionary for space travel. Turns out, it was just some electromagnetic interaction with its surrounding test environment, and would not work in the vacuum of space.
Looks like a waste of time and not scalable at.............I never get these videos and dang there are to many on UA-cam.
What are you looking for? Maybe I can help.
There are two Free Energy definitions.
From the Ether and by Cost Analysis, remember that.
By Cost Analysis would be Dennis Lee.
Dennis Lee's the only person who won a Free Energy Fraud lawsuit case brought by the full force of the United States Government.
Dennis Lee's Free Energy Panel System is actually quite simple. It uses a subzero gas that collects heat from anywhere in the world 24/7 and compresses it to turn water into steam that runs a steam engine in a closed loop. It just sits there thumping away making free energy. Easy to manufacture and maintain. So why aren't they being used instead of Solar Panels, you know, if we have to save the world from Global Warming?
ua-cam.com/video/2ZYtMsqtQC8/v-deo.htmlsi=bHLOhUVUdBRtsJ34
Floyd Sweet's invention is Over Unity.
The Why Files has a video episode on Free Energy and you can grab a few more names from it to investigate.
There are two definitions for Free Energy. From the Ether and by Cost Analysis.
Dennis Lee and Paul Pantone are by Cost Analysis.
Troy Reed documented his Free Energy Generator from a 9 foot monstrosity to the size that fits in an economy car.
These are some of the best on both sides.
There's other avenues to investigate too. Patent Office Whistle Blowers.
Good luck and don't give up.
😂😂😂 Le debe sobrar el dinero para éste intento obviando ¡Mmmm! Juguete espantosamente caro para éstos escasos resultados ,igual servirá para vender coleccionista o fanático de Bedini ,ese creador histórico que muchos tragan sus conocimientos y otros pocos lo consideramos ¡Oportunista vividor !
Bitcoin 🪙
So boring
RUSSELL IT'S RUSSELL please get in touch with me ASAP as it's really important