Thanks for your video. I am looking for an outboard for our sailingboat which has no inboard diesel. I couldnt accept that a 6 hp woud be sufficiënt eventhough getting Some advice earlier. Now that I have seen it, I am finally confinced. Thanks!
A bit smaller, it’s a Marieholm 26 (empty weight about 2,5). It will mostly be used on open water lakes and close to the coast. Especially the increased weight compared to our previous (23ft Puma) was making me doubt the HP. So thanks again and regards from the Netherlands!
@ had one on my 22 foot sail boat and pushed it along to its hull displacement speed no issues 5.5 knots. Carry a spare engine. I have had to do some repairs on the water and having the same engine as a spare is great for reliability and swapping parts out so your adventures are not ended early
Hi @sailingfishcake. There really good engines, super reliable, cheap parts unless its something a bit bespoke. Had to wait 6 weeks for a throttle drum. The hardest challenge you will have is mounting a bracket at the perfect height and dealing with the rake on the back of your boat. Looks very cold where you are! safe sailing and I just subscribed to your channel so looking forward to seeing you get to the Caribbean. All the best Rob
@@EastCoastSailing_ looks like a great way to have a spare emergency engine. I can only imagine how difficult it must be to level it correctly though. It is cooold here! I’ve already been to the Caribbean, so now I wanna explore the north. Please keep posting! Great content :)
LOL, thanks for the opening part of this video, i have a boat in Tollesbury as well, now realised why the water was erratic on the approach , i was not staying in the channel on high tide, d;oh, very useful drone footage.....
@@alecmartin2661 Hi Alec, what boat do you have and what pontoon is it berthed on. I couldn’t believe my eyes yesterday. Seemed like an ultra low tide. The back pontoon near the entrance was completely silted up. A really good check to make sure your in the deepest section of a channel is using google maps with satellite imagery on. Look forward to meeting you when the tides and weather are better 👍
@@EastCoastSailing_ i have the Jenneau next to the Hunter Legend on G pontoon, slowly turning it around as it was neglected before i bought it last year, but slowly getting there. was gonna say hi when i see you down there, but not seen you yet. liking the channel btw......
@@alecmartin2661 Thankyou. I was down yesterday. Was hoping to go out but winds were mad and tides were too low today to get a few hours in. I’ll see you down there next week 😎
For long distance motoring when not enough wind to sail, I have heard that it is significantly less expensive to use a small outboard than to put hours on the inboard engine. Since autopilot uses the rudder to steer, you need only crank the outboard and let it ride.
Great video. I use this engine as the sole auxiliary on a 2000 kg sailboat and it works fine. Mine motor's white, looks great. So many people use 9.9s on small yachts but I'm not sure if that's just overkill. More weight on the transom has its disadvantages too.
Hi John. I had it as a primary engine on my last 22 foot sail boat which weighed about 1.5 tonnes. A 6hp will get any smaller boat to its hull displacement speed which was about 5.5 knots and I was pretty impressed it only lost a knot on 5/6 tonnes 34 foot boat on a windy day. Just gives me peace of mind knowing I have sails and 2 engines before I’m in the proverbial s#%t 😂👍 thanks for watching.l and the white outboard are the newer versions by a year or so I think.
They are great engines. Normal replacement parts are pretty cheap. Only drawbacks is some of the more specialist parts can be on a 6 week lead in. That’s why I always carried a spare on board of the same male and model. Never had a problem in 10 years. Thanks for watching and taking the time to leave a comment! All the best Rob
Very intresting! I bought my first boat recently and I have a 3HP and a 15HP , thinking which one is more apropriate. Its a 400kg fiberglass boat so probably the 3HP will be adequate!
Hi, I think 15HP will go very fast, you might be able to plain the boat so will go much faster and save fuel but you need to make sure the transom is strong enough to take the weight of the outboard. A 15HP 4 stroke outboard will weight 50 Kg's. The live load going over waves will be significantly more so you may need to strengthen the boats rear end. The 3HP outboard will get you going but if your having to push against a strong tides and against the wind you might not get anywhere. Its always nice to have some power contingency. You also need to consider the weight of the outboard, taking these engines off on your own regularly. If your at a marina and not having to worry about taking the engines off id leave the 15HP on. Are your outboards 4 stroke or 2 stroke as the later generates a lot more hp. Also are you taking your boat out in open sea, tidal areas or closed lakes? Ill be able to advise you better. Thanks
@@EastCoastSailing_ Thanks a lot mate for the reply, reading back my comment I forgot to add that its a 14ft-4.7m boat, and it has a 60hp main outboard (1986 Johnson 60) so im considering having a back up motor just in case. I think the 15hp might be a bit too much, power and weight wise, so on days with no wind, I think the 3hp will be adequate as a back up. And if some days the boat is loaded with people etc, the 15hp might be a better fit cause the 3hp might not be enough
Thanks for putting this video together. We have an 18 x 8 foot 1,100 kg traditional cat boat with 6 HP Mercury. It is my understanding that it has the same as, or built by Tohatsu. It is the long shaft but with a standard Propeller (7.8 x 8 ) Would you have any experience with the difference in performance between this and the Sail Drive Prop on this size boat
@@davidmcgill7650 Hi David, yes I do have experience with the standard and the sail drive - both tohatsu. My back up emergency engine in my last boat which was a 22 foot bilge keel 1.2 tonnes was a standard 6hp long shaft I kept in the locker as my last boat didn’t have an inboard engine, just a 6hp sail drive as my main engine. For me the hull displacement speed is a limiting factor. The sail drive actually needs to rev a bit higher to get the same speed as the standard prop as the blades are angled less agressively which means more fuel and more noise. For a boat the length and weight you’re talking about the standard prop is fine and will actually give you better cruising MPG and a higher top end speed especially being a performance catamaran and being so light. You will never get prop was with a standard prop pushing a boat that light. The advantage of the sail drive is it has a 12v charging to charge batteries if you need power. You must be able to get you boat to 7-8 knots full power ? Thanks
Ive had my diesel engine quit and tied my dingy to the starboard side of a Catalina 30. It has a 5hp honda , it pusshed it no problem. Had some cavitation but got my back to the slip!
Nice and informative video, thanks. nHad a 5hp extra long shaft Merc hi thrust prop on my Contessa 26, will be going to this Tohatsu UL 6hp SailPro for my new (but old) Twister 28. It will be my only auxiliary (no inboard), save perhaps an electric outboard as an emergency back up.
Hi Junk Rig Sailor. Thanks for watching. Twister looks like a very capable off shore boat. Just took a look at your page. If you have the space I always had 2 of these engines. That way the spares are interchangeable. They are good engines but I have had small issues that stopped it running. If it were not for carrying the same engine as a spare it could have ended a few trips early. You can get these units pretty cheap second hand at 1/3 of the price new. The tohatsu warranty isn’t worth the paper it’s written on. As soon as you do any work your self you invalidate the warranty which is impossible. You will be pleased with your purchase they are great engines that are east to work on. Just keep a few spares on board like a spare carb, fuel pump, water impeller, fuel filter and spark plug. All the best
@@EastCoastSailing_ A spare is not a bad idea, but as ever storage can become an issue on a small boat, but I am sure I will figure something out. Cheers and fair winds.
I have a victoire 28 and i am considering an outboard. My boat weighs around 3500kg and i was wondering if you think that this tohatsu will be able to power the boat along at 5 knots on flat water.
@@shakexproducts5984 It will do fine with the 6hp SailPro - however, what it is more about is your mentality? Are you a sailor, or a "turn on engine when wind drops below 10 Knots" guy? On the opposite end, are you always wanting extra push when sailing to windward - another reason people stick their motor on when sailing. If you can truthfully "Yes, No, No" to those three questions above your outboard will be fine,. For what its worth my Twister displaces near 5,000kg.
Which prop would you recommend on a swift 18ft explorer (open, unstayed ketch) 2 ft draft, single keel with a 40kg centre board, slow hull speed. Its a low engine well/transom so would take a short shaft. Im considering modifying the transom and rudder to take a 6hp but have seen people with the same boat and smaller outboardS. The boat is. Based on a mooring in Christchurch so on occasion has to deal with fast tidal flow through the narrow harbour entrance. Thanks for the video and your time to fil and edit. Chris
Hi Chris, thanks for reaching out. Your boat ultimately will have a hull displacement speed and no matter how big the outboard you put on it, it won’t go any faster. You certainly won’t need a sail drive prop for your boat given how light it is. You will just be wasting fuel having a shallow prop. I personally had this outboard on my 22 foot boat before and it pushed it along at 5.5 knots all day long so might be a bit quicker on your boat, I also had a spare engine I used another 6hp tohatsu with just a normal prop and it pushed it along the same speed. The only reason why I got a sail drive is it has a charging output to top up batteries. I think you would be fine with a 4hp onwards. Also think about weight. If you’re only using it to get out of harbour and never have it on then a 2 stroke would be a great option. All the best Rob
Ah Tolllesbury u need an engine and the ability to see under the water and see the mud. I caught the edge of the little cob leaving Tollesbury we missed the The post with the Swan on it !! Got off OK but u need eyes in the back of your head.. Hunter 23 Twin Keel Based at Bradwell.
Hi Chris, yes it is a very challenging place to navigate but very rewarding. We are just in maylandsea tonight, only a stones throw from out marina. Sometimes the best places are on out door step 😊👌🏼 another episode out next week
This was no test. Itwas simply a demonstration of the Tohatsu 6hp outboard - which is an excellent motor, with a Hi-Torque prop. No where in this demo was there any mention or depiction of stopping power. Virtually any outboard will move almost any boat, but stopping and maneuver power at very low speeds when there isn't enougfh way on is just as important as running power. Further, the conditions shown here are absolutely the worst possible to caught in while attempting to navigate with an under powered boat. My advice - as one who has sailed allmy life - is double the HP on any outboard for a sail boat. A trailer sailer of 18ft will behave much better if the motor is an 8hp rather than the typical 3 or 4 hp. Everything matters when you're at the dock - or avoiding those others with tiny motors, who are also at the dock. Open waters are no problem, but - wind, river currents, and tide, can make or break your day.
Hi, the video as per the thumbnail was to demonstrate If the outboard was powerful enough to propel the boat not stop the boat. This setup as stated in the video was for emergency use only if the main engine ever failed. There’s no remote controls to change to reverse gear without having to step down on the back of the boat and do it manually. Would I attempt to go into a tight marina and berth it with this setup….. well it wouldn’t be my preferred option. Would I attempt to land on a an empty hammer head pontoon clear of boats with good turning room…. yes no hesitation. I think you’re missing the point of emergency use. This setup would be perfect to get your out of open sea into a protected narrow estuary or bay to drop anchor to sort the main problem out or get close enough to the marina to get a tow in? you might be drifting onto rocks if your main engine cut out and there was no wind to sail. Why would an 8hp engine be a good substitute? I’m a strong fella and an 8hp outboard weights 40kg instead of 25kg for a 6hp outboard. The transom would have to be significantly strengthen to take this weight. How would anyone be able to safely lift a 40kg outboard from the bilge locker and put it on the back of the boat moving about. Also an 8hp outboard wouldn’t even fit in locker for storage. Also regardless of the increased stopping power, it still doesn’t change how you have to change to reverse stepping off the boat which is the main limitation of this setup. You sound like you have never sailed in your life.
Thanks for your video. I am looking for an outboard for our sailingboat which has no inboard diesel. I couldnt accept that a 6 hp woud be sufficiënt eventhough getting Some advice earlier. Now that I have seen it, I am finally confinced. Thanks!
@@Joppie86 Glad it helped! Out of
Curiosity what size is your boat ? Thanks
A bit smaller, it’s a Marieholm 26 (empty weight about 2,5). It will mostly be used on open water lakes and close to the coast. Especially the increased weight compared to our previous (23ft Puma) was making me doubt the HP.
So thanks again and regards from the Netherlands!
@ had one on my 22 foot sail boat and pushed it along to its hull displacement speed no issues 5.5 knots. Carry a spare engine. I have had to do some repairs on the water and having the same engine as a spare is great for reliability and swapping parts out so your adventures are not ended early
Excellent, will probably do just so. Thanks again!
I had the exact same question on my mind lately and you just delivered it! It was a very interesting watch. Thanks a lot 😃
Hi @sailingfishcake. There really good engines, super reliable, cheap parts unless its something a bit bespoke. Had to wait 6 weeks for a throttle drum. The hardest challenge you will have is mounting a bracket at the perfect height and dealing with the rake on the back of your boat. Looks very cold where you are! safe sailing and I just subscribed to your channel so looking forward to seeing you get to the Caribbean. All the best Rob
@@EastCoastSailing_ looks like a great way to have a spare emergency engine. I can only imagine how difficult it must be to level it correctly though.
It is cooold here! I’ve already been to the Caribbean, so now I wanna explore the north.
Please keep posting! Great content :)
LOL, thanks for the opening part of this video, i have a boat in Tollesbury as well, now realised why the water was erratic on the approach , i was not staying in the channel on high tide, d;oh, very useful drone footage.....
@@alecmartin2661 Hi Alec, what boat do you have and what pontoon is it berthed on. I couldn’t believe my eyes yesterday. Seemed like an ultra low tide. The back pontoon near the entrance was completely silted up. A really good check to make sure your in the deepest section of a channel is using google maps with satellite imagery on. Look forward to meeting you when the tides and weather are better 👍
@@EastCoastSailing_ i have the Jenneau next to the Hunter Legend on G pontoon, slowly turning it around as it was neglected before i bought it last year, but slowly getting there. was gonna say hi when i see you down there, but not seen you yet. liking the channel btw......
@@alecmartin2661 Thankyou. I was down yesterday. Was hoping to go out but winds were mad and tides were too low today to get a few hours in. I’ll see you down there next week 😎
@@EastCoastSailing_ water is rising this week, i should be about sometime, will look out for you
For long distance motoring when not enough wind to sail, I have heard that it is significantly less expensive to use a small outboard than to put hours on the inboard engine. Since autopilot uses the rudder to steer, you need only crank the outboard and let it ride.
You should give courses on "how to produce a great UA-cam video". This was perfect.
Hi Peter, thanks for the positive comment and thanks for watching. I hope the video helped👍
Great video. I use this engine as the sole auxiliary on a 2000 kg sailboat and it works fine. Mine motor's white, looks great. So many people use 9.9s on small yachts but I'm not sure if that's just overkill. More weight on the transom has its disadvantages too.
Hi John. I had it as a primary engine on my last 22 foot sail boat which weighed about 1.5 tonnes. A 6hp will get any smaller boat to its hull displacement speed which was about 5.5 knots and I was pretty impressed it only lost a knot on 5/6 tonnes 34 foot boat on a windy day. Just gives me peace of mind knowing I have sails and 2 engines before I’m in the proverbial s#%t 😂👍 thanks for watching.l and the white outboard are the newer versions by a year or so I think.
I had a 6HP Tohatsu SailPro on my Catalina 25. It was the perfect motor for that boat.
Great engines ! Worth every penny and easy to work on. Thanks for watching !
I use a Sail Pro on my Albin Vega 27. Love it. Just wish I got the extra long shaft.
They are great engines. Normal replacement parts are pretty cheap. Only drawbacks is some of the more specialist parts can be on a 6 week lead in. That’s why I always carried a spare on board of the same male and model. Never had a problem in 10 years. Thanks for watching and taking the time to leave a comment! All the best Rob
Love it, great videox
Glad you enjoyed it
Very intresting! I bought my first boat recently and I have a 3HP and a 15HP , thinking which one is more apropriate. Its a 400kg fiberglass boat so probably the 3HP will be adequate!
Hi, I think 15HP will go very fast, you might be able to plain the boat so will go much faster and save fuel but you need to make sure the transom is strong enough to take the weight of the outboard. A 15HP 4 stroke outboard will weight 50 Kg's. The live load going over waves will be significantly more so you may need to strengthen the boats rear end. The 3HP outboard will get you going but if your having to push against a strong tides and against the wind you might not get anywhere. Its always nice to have some power contingency. You also need to consider the weight of the outboard, taking these engines off on your own regularly. If your at a marina and not having to worry about taking the engines off id leave the 15HP on. Are your outboards 4 stroke or 2 stroke as the later generates a lot more hp. Also are you taking your boat out in open sea, tidal areas or closed lakes? Ill be able to advise you better. Thanks
@@EastCoastSailing_ Thanks a lot mate for the reply, reading back my comment I forgot to add that its a 14ft-4.7m boat, and it has a 60hp main outboard (1986 Johnson 60) so im considering having a back up motor just in case. I think the 15hp might be a bit too much, power and weight wise, so on days with no wind, I think the 3hp will be adequate as a back up. And if some days the boat is loaded with people etc, the 15hp might be a better fit cause the 3hp might not be enough
Thanks for putting this video together. We have an 18 x 8 foot 1,100 kg traditional cat boat with 6 HP Mercury. It is my understanding that it has the same as, or built by Tohatsu. It is the long shaft but with a standard Propeller (7.8 x 8 ) Would you have any experience with the difference in performance between this and the Sail Drive Prop on this size boat
@@davidmcgill7650 Hi David, yes I do have experience with the standard and the sail drive - both tohatsu. My back up emergency engine in my last boat which was a 22 foot bilge keel 1.2 tonnes was a standard 6hp long shaft I kept in the locker as my last boat didn’t have an inboard engine, just a 6hp sail drive as my main engine. For me the hull displacement speed is a limiting factor. The sail drive actually needs to rev a bit higher to get the same speed as the standard prop as the blades are angled less agressively which means more fuel and more noise. For a boat the length and weight you’re talking about the standard prop is fine and will actually give you better cruising MPG and a higher top end speed especially being a performance catamaran and being so light. You will never get prop was with a standard prop pushing a boat that light. The advantage of the sail drive is it has a 12v charging to charge batteries if you need power. You must be able to get you boat to 7-8 knots full power ? Thanks
Ive had my diesel engine quit and tied my dingy to the starboard side of a Catalina 30. It has a 5hp honda , it pusshed it no problem. Had some cavitation but got my back to the slip!
As long as it got you back that's all that matters! Thanks for watching 🙂
@@EastCoastSailing_ always have a back up! (Don't tell my wife that...)
Love it x
Nice and informative video, thanks. nHad a 5hp extra long shaft Merc hi thrust prop on my Contessa 26, will be going to this Tohatsu UL 6hp SailPro for my new (but old) Twister 28. It will be my only auxiliary (no inboard), save perhaps an electric outboard as an emergency back up.
Hi Junk Rig Sailor. Thanks for watching. Twister looks like a very capable off shore boat. Just took a look at your page. If you have the space I always had 2 of these engines. That way the spares are interchangeable. They are good engines but I have had small issues that stopped it running. If it were not for carrying the same engine as a spare it could have ended a few trips early. You can get these units pretty cheap second hand at 1/3 of the price new. The tohatsu warranty isn’t worth the paper it’s written on. As soon as you do any work your self you invalidate the warranty which is impossible. You will be pleased with your purchase they are great engines that are east to work on. Just keep a few spares on board like a spare carb, fuel pump, water impeller, fuel filter and spark plug. All the best
@@EastCoastSailing_ A spare is not a bad idea, but as ever storage can become an issue on a small boat, but I am sure I will figure something out. Cheers and fair winds.
I have a victoire 28 and i am considering an outboard. My boat weighs around 3500kg and i was wondering if you think that this tohatsu will be able to power the boat along at 5 knots on flat water.
@@shakexproducts5984 It will do fine with the 6hp SailPro - however, what it is more about is your mentality? Are you a sailor, or a "turn on engine when wind drops below 10 Knots" guy? On the opposite end, are you always wanting extra push when sailing to windward - another reason people stick their motor on when sailing. If you can truthfully "Yes, No, No" to those three questions above your outboard will be fine,. For what its worth my Twister displaces near 5,000kg.
Which prop would you recommend on a swift 18ft explorer (open, unstayed ketch) 2 ft draft, single keel with a 40kg centre board, slow hull speed. Its a low engine well/transom so would take a short shaft. Im considering modifying the transom and rudder to take a 6hp but have seen people with the same boat and smaller outboardS. The boat is. Based on a mooring in Christchurch so on occasion has to deal with fast tidal flow through the narrow harbour entrance.
Thanks for the video and your time to fil and edit.
Chris
Hi Chris, thanks for reaching out. Your boat ultimately will have a hull displacement speed and no matter how big the outboard you put on it, it won’t go any faster. You certainly won’t need a sail drive prop for your boat given how light it is. You will just be wasting fuel having a shallow prop. I personally had this outboard on my 22 foot boat before and it pushed it along at 5.5 knots all day long so might be a bit quicker on your boat, I also had a spare engine I used another 6hp tohatsu with just a normal prop and it pushed it along the same speed. The only reason why I got a sail drive is it has a charging output to top up batteries. I think you would be fine with a 4hp onwards. Also think about weight. If you’re only using it to get out of harbour and never have it on then a 2 stroke would be a great option. All the best Rob
Ah Tolllesbury u need an engine and the ability to see under the water and see the mud.
I caught the edge of the little cob leaving Tollesbury we missed the The post with the Swan on it !!
Got off OK but u need eyes in the back of your head..
Hunter 23 Twin Keel
Based at Bradwell.
Hi Chris, yes it is a very challenging place to navigate but very rewarding. We are just in maylandsea tonight, only a stones throw from out marina. Sometimes the best places are on out door step 😊👌🏼 another episode out next week
@EastCoastSailing_
My mate now sails from Titchmarsh in his Westerly Discus they issue there is don't miss the Pye End Buoy or you are in the sh.t..
🥳👌
This was no test. Itwas simply a demonstration of the Tohatsu 6hp outboard - which is an excellent motor, with a Hi-Torque prop.
No where in this demo was there any mention or depiction of stopping power. Virtually any outboard will move almost any boat, but stopping and maneuver power at very low speeds when there isn't enougfh way on is just as important as running power.
Further, the conditions shown here are absolutely the worst possible to caught in while attempting to navigate with an under powered boat.
My advice - as one who has sailed allmy life - is double the HP on any outboard for a sail boat. A trailer sailer of 18ft will behave much better if the motor is an 8hp rather than the typical 3 or 4 hp. Everything matters when you're at the dock - or avoiding those others with tiny motors, who are also at the dock. Open waters are no problem, but - wind, river currents, and tide, can make or break your day.
Hi, the video as per the thumbnail was to demonstrate If the outboard was powerful enough to propel the boat not stop the boat. This setup as stated in the video was for emergency use only if the main engine ever failed. There’s no remote controls to change to reverse gear without having to step down on the back of the boat and do it manually. Would I attempt to go into a tight marina and berth it with this setup….. well it wouldn’t be my preferred option. Would I attempt to land on a an empty hammer head pontoon clear of boats with good turning room…. yes no hesitation.
I think you’re missing the point of emergency use. This setup would be perfect to get your out of open sea into a protected narrow estuary or bay to drop anchor to sort the main problem out or get close enough to the marina to get a tow in? you might be drifting onto rocks if your main engine cut out and there was no wind to sail. Why would an 8hp engine be a good substitute? I’m a strong fella and an 8hp outboard weights 40kg instead of 25kg for a 6hp outboard. The transom would have to be significantly strengthen to take this weight. How would anyone be able to safely lift a 40kg outboard from the bilge locker and put it on the back of the boat moving about. Also an 8hp outboard wouldn’t even fit in locker for storage. Also regardless of the increased stopping power, it still doesn’t change how you have to change to reverse stepping off the boat which is the main limitation of this setup. You sound like you have never sailed in your life.
excellent video of the experiential
data i was looking for
@@SpencerBurns-jq8lj no problem 😉 glad it helped 🫡⛵️
where are you sailing out of?
Tollesbury Essex 👌🏼 you near ?