@Stephan2388 Unfortunately I don't have the unit anymore, so cannot tell you exactly the name of the input, but the option of controling the sound that comes out of operating system is there. Try different inputs other than "analog in", the name of the input you are looking for doesn't have anything related to USB in it. Can be DAW, LOOP, Int. or whatever.
@OzBoomBap86 Are you getting any reading on any of the meters in the CueMix when you using the turntable? If yes, you should look into Logic input configuration. The driver allows direct feed from the interface input to the DAW software regardless of what you do in the CueMix. If nothing comes in, you should look at gain (trim) adjustments of the inputs where you feeding your signal.
so what do you want to say is this software make you easier to setup the effects instead of pushing and turn all the knob on the interface? one more question can I do direct monitoring my vocal with effects but my audio on the track in the daw is clean(free from any effects)?
Hello, I’m using CueMix with my MOTU 828 mkiii (& MOTU 8 Pre), to record drums into Pro Tools. I’m finding that the CueMix mixer setup is extremely complicated and unintuitive. Is there any way to bypass the XueMix mixer settings and simply use a combination of the knobs on the actual audio interface itself, along with the knobs in Pro Tools itself, to set the settings of each track?
@OzBoomBap86 This mixer is a little tricky since it allows you to custom route pretty much everything. To get started with, give me some problem description. Be specific in what you want to achieve and what are you getting. One problem at a time please.
There is no traditional side channel option on the compressors here. There is probably a way to do it through complex routing like it's done on older DAW, but I haven't tried it. It would be too complex here and will kill two extra channels. I don't think it would be practical.
can you use direct monitoring and audio from software on the same Mix/Output. I want to be able to use Reason for click track and loop, my mic input from guitar, and a monitor feed all into 1 stereo mix for In-Ears.
@Stephan2388 Unfortunately I don't have the unit anymore, so cannot tell you exactly the name of the input, but the option of controling the sound that comes out of operating system is there. Try different inputs other than "analog in", the name of the input you are looking for doesn't have anything related to USB in it. Can be DAW, LOOP, Int. or whatever.
@OzBoomBap86 Are you getting any reading on any of the meters in the CueMix when you using the turntable? If yes, you should look into Logic input configuration. The driver allows direct feed from the interface input to the DAW software regardless of what you do in the CueMix. If nothing comes in, you should look at gain (trim) adjustments of the inputs where you feeding your signal.
so what do you want to say is this software make you easier to setup the effects instead of pushing and turn all the knob on the interface? one more question can I do direct monitoring my vocal with effects but my audio on the track in the daw is clean(free from any effects)?
Hello, I’m using CueMix with my MOTU 828 mkiii (& MOTU 8 Pre), to record drums into Pro Tools. I’m finding that the CueMix mixer setup is extremely complicated and unintuitive. Is there any way to bypass the XueMix mixer settings and simply use a combination of the knobs on the actual audio interface itself, along with the knobs in Pro Tools itself, to set the settings of each track?
@GKiddBeatz It comes with hardware, from the manufacturer.
@OzBoomBap86 This mixer is a little tricky since it allows you to custom route pretty much everything. To get started with, give me some problem description. Be specific in what you want to achieve and what are you getting. One problem at a time please.
There is no traditional side channel option on the compressors here. There is probably a way to do it through complex routing like it's done on older DAW, but I haven't tried it. It would be too complex here and will kill two extra channels. I don't think it would be practical.
can you use direct monitoring and audio from software on the same Mix/Output. I want to be able to use Reason for click track and loop, my mic input from guitar, and a monitor feed all into 1 stereo mix for In-Ears.
@rdnymllnele Yes you can do all this and some more :-)
How to loopback mix setting cumix to nuendo 4
HOW can i get..Cue Mix?!
need sidechain compression too ;-)
Watch video "Motu ultralite mk3 - 4/4"