Revival of a $1000 KX250 from Start to Finish
Вставка
- Опубліковано 27 чер 2023
- I partnered with DupliColor for this project! Check out DupliColor products here: www.duplicolor.com/
Here are the specific DupliColor products I used for this project:
Prep Spray: qr.page/g/LFzwoxzHWv
Self-Etching Primer: qr.page/g/2ey4S9qmFDs
High-Performance Wheel Coating and Matte Clear Coat: qr.page/g/4vFVtjh9tMp
Acrylic Enamel and ClearCoat: qr.page/g/38edI4LQZsq
#ad #sponsored #duplicolorpartner
I bought a KX250 for $1000 a few months ago. This is the complete process I went through to bring it back to life from start to finish!
Instagram: / kincadepavich
TikTok: / kincadepavich
Support the channel by bookmarking this affiliate link to make your purchases on Rocky Mountain: www.rockymountainatvmc.com/?r...
This bike is kitted with brand new plastics from MX Plastics. Use the code “MXP10” for 10% off your next order: www.decalmx.com/productListin...
Along with custom graphics and a custom seat cover from DeCal Works: decalworks.com
Pryme MX products are essential for any bike build. I earn a small commission when you purchase Pryme products through this link: prymemx.com/?ref=kincade
This bike shines thanks to new hardware from Fast Metric: fastmetricfasteners.com
This bike is kitted with Pro X parts throughout: www.pro-x.com/
This bike is sure to grip thanks to some brand new tires from Shinko: shinkotireusa.com
Stuck Nutz is a new thread locker company dedicated to keeping trails and riding areas accessible. I support what they stand for and you should too! Save 10% on your order using the code "KP10": stuck-nutz.com/
First beat is "Daydream" by Chandler Bouldin
The remainder of the music is from Epidemic Sound:
Going for the Best by Daniel Fridell
So Long Comet by Coma Svensson
The Last Kiss by Ritchie Everett
Emily by Ritchie Everett
Just a Little Bit by Chris Shards
Summer Flirt by Autohacker
Starfields by Hallman
The Morgue by Cushy - Авто та транспорт
6% + 1 individual enjoyed that shot. Commenting on Jani's behalf
+1
+2
All my fears about buying a used bike, all rolled into one video 😄 Great job on the rebuild.
Hahah thank you!
Haha i buy used bikes with intention to open then up straight away. While checking If it run good but mostly i check shocks and lingages. Those are good i take it. Never trusting someones hours on piston storys.
He has the garage, the body and the brains! Love you dude, hoping to be doing projects as such on my own someday, sadly deals arent as good around here.
Man that glass/sandpaper re-surfacing trick is money.
Smooth counter tops work good too!
I'm auto tech and I appreciate the great workmanship that you do and the videos that you put out. Have ever thought doing what to look for video when buying a used bike?
Thanks a lot! Truthfully I haven't really, I feel like there's good content available for that, but I may take it into consideration!
You should! It’s great to hear different opinions!
@@KincadePavichyeah I'd rather you focus more on in depth rebuild stuff like transmission/engine work along with electrical.
@@KincadePavich I highly request this video, im currently looking for a trail bike and a project bike . I’ve been watching your videos along with some others, trying to educate myself on how to work on bikes. Myself and Im sure many more would highly appreciate a video talking about what to look for when shopping for used bikes . I’ve seemed to find a lot for a good price that say they run good but how do I know I’m not gonna run into issues like these such as previous mechanics making non beneficial add ons/repairs. Great videos keep it up!!
That CR is definitely an old crusty deamon of the dirt.... Looking forward to what you make out of it. KX is dope!
Thank you!
Watched each individual video on this build and gotta say the full build video was just as awesome. Liked the commentary through out on this one. Looking forward to the next project! Honda 😮
Thanks so much for following along!
This was absolutely awesome and best work done... the bike looks so amazing
We've had a few '02 KX's. That year is really the best of all from '97-'06 - best motor character for sure. A "must do" however, is to put '03 triple clamps on it. Makes it a whole new bike that can actually turn with the front. A friend who was a race mechanic gave us all the goods on making KX's haul, so we implemented a few of his suggestions with great results...
Great to see some ones project is going nicely along. My fram and engine just fell down after i painted so i’ll be starting alllll over again
Rad!!! Happy to see you use the old style plastics for this kx. I would definitely race this bike!!
21:26 some people may not agree with me on this but when im working with stuck hardware on the vice i smack the vice handle with the mallet or sledge gets those seized bolts every time
Yup! The project that is too big to fail! You did the right thing. You upped the resale value.
Such a great pleasure watching your videos! you've made an Awesome Job man
I love your restoring videos!
Thank you!
Even tho I watched every episode, i enjoyed watching this again. You're a good dude and you have a great eye for making bikes look great. God help you with that CR tho that's proper roached, haha. Look forward to the build.
Thanks so much I appreciate your support and comments!
Absolutely stunning
Every bike I buy is in this condition too 😂 great build 👍🏻
Let's just replace everything while we're at it.
I applaud you.
That kx looks like a new bike,well done on that job. Cant wait to see the CR gettin done,looks like a lot of work needed there but your the man.
Thanks a ton! Stoked to tackle the CR!
@@KincadePavich Cool,got 1987 CR250 im just about to get stuck into as well. You got a good thing going on here,please keep it up,you only have to read a few comments to see how much folks are enjoying them. :)
Love this build ❤
Bro, i had a 96 xr600r that was street legal when i bought it in 2015, and 90% of the spokes wouldnt tighten or loosen. I was broke at the time so i just rode it anyway. The rear wheel ended up exploding, cracking the wheel and luckily i was only going about 10mph in a turn. Lowsided and even with jeans on my entire shin was skinless! Always check old wheels and spokes!!!!
It actually might have been a 93 xr600r now that im thinking about it haha
Pro tip, when resurfacing a cylinder try to go in an infinity symbol type pattern to avoid shaving too much off from one side, as you’ll find your fingers might weigh down one side more than the other. Also, make sure to regularly clean your sand paper, the shavings can build up and glaze the surface, reducing the bite on the gasket. Love the rebuild, not to much or to little!
omg that was very good keep up the hard work thank you very much
Wow. Inspired to go wrench now. Great work
Man that thing looks amazing! I can’t wait for the CR. I’m building a 2002 CR125 right now.
Awesome, and thank you!!
That is one 10/10 bike for sure!
I'm a 4-stroke guy (mainly because of the sound and power) but, I love Dirtbikes, none the less. I loved this video. It's a skill I wish I could do and love watching any who does.
Great job the bike looks beautiful
Best part of the video is removing the kickstart lever 😂 good work I wish I would have documented my build like this.
Took so long hahaha! Thank you!
Some nice tips and tricks I'm going to use on my '00 KX250 ... though I actually love the raw aluminum color of the wheels, I hate the black on my new bike. 😀Love that case sticker, I'll be grabbing one of those for sure.
That takes serious commitment
I have to say this is about what to expect every time you buy a used 2 stroke. I have done it many times. The fact that I love doing it doesn't justify it in my wife's eyes though. Lol.
Hi, Use 1/4" to 3/8" green tempered shelf glass. Make sure is is on a perfectly flat surface. I use an old counter top. You need copper jaws on your vice. I'll make a pair for you. I have that (20) vice/s..Great job on the rebuilds. I'm 62, Hobby machinist. I'm looking for a Cr250r late model. I had 3 and sold all of them, back in the day. Urrgh! Serb or croat? Redbud is our track.
Can't wait for the CR. The black looks mean :)
Really good video mate, lot of work gone into it. Makes me miss my 250. Wish I never sold it.
Love the bench grinder on the outdoor glass table 🤣🤣
I really enjoy watching your videos.
Buddys jacked
finally !!!!!!!!!!!!!! a sand blaster
Awesome stuff!
Awesome job!
I love your work brother!!! Keep it up
Thank you!
always RAD my dude! Keep it up
Appreciate it!
My dad owned the same KX when I was a little kid, you got me inspired to something similiar :D
If you ever have to cut a sleeve or even a bearing off, cut it with a die grinder but don’t go all the way through, then take a cold chisel to your cut and it’ll usually split along that cut and won’t damage the shaft, I use this all the time at work.
I love your restoration bike😊
Excellent work bro
Loved this series man! 🔥
Thanks for following along!
@@KincadePavich can't wait for the next one
Good videos. Keep them coming
killed it
Really enjoy watching your videos. Great insight for when I finally get a bike lol 😂.
Thanks a ton!
great music in the video. Very satisfying
Glad you liked it!
Sick!🤘
That tyre remover is pretty good.
Insane
That music on the engine teardown lol
Ive used that very same shop vac extension to drive MTB fork bearing races 😂
Every time I buy a used bike I plan on at least what you did? Nothing here surprised me!
Great job bro 👍
im excited for the honda i know your gonna build a sweet bike!
Thank you!
beautiful bike. sometimes the cheapest bikes are the most expensive
Great job.
U had me at kx 2 stroke. But the shot of the rig?, haha😂
Gotta see this thing rip buddy !
Vid just went live!
Man, love the bike, just rebuilt my ktm250, nice job!!
Awesome! And thank you!
I just bought a 94' kx250, i have a similar isuue with the top end because the walls have been worn down so ill have to get a whole new big bore kit otherwise it'll keep burning up my oil
New subscriber here. Loved this clean-up. Looks amazing
Theres always some valuable information in these videos for people who like to work on things. I was thinking it might have been better finding a brand new coil instead of that old one for that price.
Girls, 7:20
You're welcome!
Love it 😂😂🥵
Next time prepack those stem bearings with a bearing packer then tap em on. I also wipe a little grease in the cup/race.
Man as someone who would literally kill to own a dirtbike i love watching ur restoration videos learning the ins and the outs of them one dayy ill be fixing up my own 🤞🏼
@Message-M6 wait is this real
Thanks a ton, I believe you will! And I see you response - no, I will never notify anyone of a bike giveaway via UA-cam comments. You gotta be careful of scammers!
@@KincadePavich yea i kinda figured got really excited but figured it was too good to be true 😂😔
I've been hoping I could find a cheap 85cc to restore. Honda, Yamaha or Kawasaki. They have always been my favorite size.
damn next project is clapped out.... Please keep that shred decal or re do it. Looks badass.
Hmmm... Will consider... :)
I love your vids man I’ve been in love with kawi 2 strokes since I could remember and will own one soon wanting a 04 or 06 250 anyone in the comments have any tips and pointers maybe something you ran into a bit while owning yours
That Baby is Sweet!!!
Your videos are so good
Thank you!
you can use a PVC pipe for the steering stem bearing too
Love the number you chose. (406) That’s my race number. 😂😂
I bought a what I thought was a 2004 KX 125 turned out to be that but it had been built with about four other 125s
Try penetrating oil. Liquid wrench makes good stuff that will dissolve rust almost instantly. I use aerokroil if I can get it.
I wish I have the time, tools and knowledge to this, great job!!!, wonder what the original owner is thinking now.
Must be satisfying to do this. Makes me want to get an old 2 banger and take my sweet time over it. If I can even break even on a sale, I'd be happy.
I used to be a welder and metal finisher/polisher so, I have a few skills to call on and friends that still work there could come in useful lol. Even have a powder coating oven that could do frames with.
Maybe one day.....
The ONE thing I don't like or rather, like less, is the black rims on modern bikes. Prefer gold or bronze personally or silver. Gunmetal would look cool.
I love shinko tires for the price and performance
Great vid m8 what was the total money spent on bike thanks
Wow dude!! You've got a Hockey net??!! MAN!!
I play adult league hockey here!
Awesome! Hahahaha, spoke removal is sexy, I’ve always said that.
man this makes me miss my 2013 yz250.... shoulda never sold it
There's always another one
Music choice for the assembly ❤
nice work However noticed when you put grease on stem bearings You should watch a video on packing hub type bearings You will be surprised on how much grease they use.
Nice! 🤙
Great video 😂😂
I have NEVER seen rusty bearings like that>>>>>>>>>>>>> Whhhoooooo!
how did you biy the piston without knowing the cylinder diameter? simply took the same size as the one that the bike came with?
I have a 96 KX 250 and I'm looking to replace the OEM triple clamps with aftermarket billet. I'm in Australia and can't find a supplier. Any USA suggestions? You guy's have the best products.
looks like that axle nut hasn't been greased in a very long time. i do it every time i change the tire, i thought that was common knowledge. i have the 4 stroke version ('05 250f) i abused it heavily when i was a teenager. would love to buy new parts for it but parts are getting hard to find
Those Kawasaki Japan stickers mean something bro. If you know you know. That was probably a serious racers bike back in it’s hay day if it’s sporting that sticker on the shock
Interesting!
I think you need to invest in an ultrasonic cleaner for your carbon stuff or anything else engine wise tbh, easy and gets into every single nook and granny!
i learn s0 much
What’s your fitness routine ? “Disassembling old dirt bikes”