Timestamps - ☑️ Speed & Strength SS900 - 1:19 ☑️ HJC CL-17 Combat - 3:33 ☑️ Bell SRT - 6:29 Take a look at the helmets on Get Lowered Cycles here: bit.ly/2rlQe2S
You should just go for it. I wanted to do it for years and some people, including Dan made me go for it. Dont even have a full license yet but man i love it. Already have gear and a ton of knowlidge by following the channel. If its possible for you, just do it. Its a great feeling.
My usual requirements are ECE, Pinlock, as quiet as possible, Modular, an internal sun visor, chin curtain and intercom in that order of preference. My current helmet is a matte black Shoei Neotec 2 and I have the integrated sena installed too. Ticks all the boxes, makes commutes comfortable and well worth the expense in my opinion.
Just a side note, when you were explaining the difference between more expensive and cheaper helmets you left out weight. Cheaper materials are usually heavier.
Dont waste your money on 'antifog spray' See that dish detergent in your kitchen? Put some on a soft cloth. Rub it all over the inside of your visor. Presto. Do that once a week. No more fogging up.
@@OBENSquad_21 No. It does not. I mean, sure it keeps the visor fog free for a couple more breaths than it would normally, in like 0 C. Tried it on multiple occasions, spoken with friends that have tried it. Pretty useless all round, be it anti-for spray, or the detergent / shaving cream method. Pinlock is the only thing that works, and even that is heavily dependent on the helmet. I have an AGV K1 with an installed Pinlock which is garbage, and an HJC Rpha 90 with a Pinlock that is pretty effective, yet not 100% fog proof in very cold scenarios.
Fact, DOT approved helmets are only approved for your head to survive a 13 mph crash. That will be all. My S&S helment is also E.C.E. approved and worth every penny 220usd I paid for it.
In Australia all helmets must meet the government standards before it even gets sold in the country. Depending on the company, there are normally members there that assist you finding the right size.
first video I have seen not BSing people that you have to buy a $400+ helmut to be safe. some of the stuff i have seen on other channels is absolute fairytale garbage. thank you for doing this, and have a great christmas.
i didnt see this video before i purchased my helmet but i bought the HJC CL-17 because i loved the price ($120 for me) and i knew i wanted a SNELL rating, watched some content and SNELL seems to often purchase helmets new and old and keep testing them to make sure they continue to meet their requirements which is pretty awesome.
Thank you sooo much for mentioning the head shape differences. This was something I could not talk my parts supervisor into considering, when ordering helmets and more often then not a customer had to "settle" for a helmet that was tight on the forehead and loose on the sides.
Scorpion EXO-R420 is my favorite budget helmet. If you're intermediate oval, it's a good option that's Snell rated and several designs and colors. Pretty quiet too.
CL-17 is awesome! It is so inexpensive and I decided on it after seeing third-party research focused on safety vs affordability! I've gotten tons of compliments on the exact finish in this video!
Never buy a helmet that is DOT only. Manufacturers get to "self-certify" for DOT. ECE or Snell and full face only. No modulars. Also make sure that you know how to fit it. If it goes on easy, it's too loose. When you buy your helmet, get some new liners/cheek pads at the same time so you can change them out when the helmet starts to loosen up. If 2-3 years when you need them, they will likely be discontinued. Really looking forward to the developments with FIM homologation. That is going to shake things up and manufacturers will have to get their ish together.
I got a Solaric Z1R modular for $150. ECE and DOT approved. Its easier to put on my head and doesnt bother the rightside of my head where Ive had surgeries at.
So true. Picked up the exo-r420 on sale for black friday. Great price for a snell approved helmet with nice features like emergency release cheek pads, locking visor, decent ventilation, etc. Looks awesome too. Seem to be often skipped as a budget helmet but as a first helmet for me its really good for the price imo
I always wear HJC ... they have the highest kite mark (UK safety testing). They are rated as being safer than helmets that will cost you $500. So I have always worn HJC ... never had to put it the test myself thank the Gods of Valhalla. But the British kitemark is recognized universally as being one of the best rating systems out there!
Like HJC five years before, they have recently dropped the SNELL cert to be able to add drop sunshields. Can't have a giant hole in the crown foam and a moving plastic and metal internal parts over your skull and be SNELL. two years ago their UA-cam shillmen pushed their snell as crucial, to dis HJC and others that had flashy features for the same price. Now they magically rarely mention it. Scorpion is a good budget helmet but noisy. Not worth over $140 though. On end of year clearance the base model is $90 from distributors.
My helmet was 119.00, has a chip in buckle strap for medical data, ECE 22.05 and DOT, has carbon fiber visor hinge points, drop down sun visor. Vented added last name for identification, and reflective stripes. I am a round oval.
I love my CL-17, very comfortable, maybe slightly big on the outside, but it breathes well with the top, forehead, and mouth closable vents. I do ride with glasses and I have added 35-40mm speakers without much trouble. Also, it does have two or three shell sizes if i'm not mistaken.
Just picked up the bell qualifier for my girl, comes with mips protection, multi vent system, transitional visor and is a full face helmet. Got it on sale but list price isnt bad for $299.
I bought a Torc-1 full-faced helmet recently for $199.00 It's a good helmet. I like to wear a helmet that's safe but also looks right with my vintage bike. That Bell you were wearing had a cool look to it.
I have been in moto store to buy a helmet there is a probleem you can't really buy what you want you buy what doesn't pressure somewhere on the head what fits and you don't have pain points so I bought shoei air 2 fits good but it's not cheap but if your head doesn't worth more it's your choice 😉
The SRT actually already comes with an anti-fog type coating to it, I'm still riding in December in Wisconsin and I only have to pop my visor open at stop signs/ stop lights because of my neck gaiter trapping my breath into the helmet. Otherwise? She doesn't fog too often
I don’t know why this channel UA-cam brought me to but I do ride motorcycles and it’s weird because I used to live in San Diego and I saw the SDC logo when this pandemic is over I’ll fly back to San Diego and check you guys out… Currently over the pond and quarantined all over the place
Thanks a bunch for this video , it was really really really helpful. And I was kinda undecided on that too, but I know I did want one with Bluetooth in it.
Love my Bell helmet. I have the Bell Qualifier DLX and it is great. Way more comfy than some of my friends higher end helmets and it fits the sena perfect. Super clean, couldn't recommend it enough.
DDFM, I love, love, love your videos and the information that you provide!!! I've learned so much from you and have become a safer rider as a result! I need a helmet and found this great guide. Thank you for what you do!!!
Before you buy a helmet, get a UV thermometer (about $20 at Harbor Freight and good for many things). Get some other color helmets from friends. Get a gloss black, gloss white, flat or stain black, flat or satin white. Set them in the sun at minimum 85 degrees for and hour+ to be sure they are fully heat soaked. Measure the temperature of each helmet. Now decide for yourself how well done you would like your brain. If you still can't decide, you've been wearing a gloss black helmet too long.
@@CelerityS1k I live in Nevada. On a hot day even a flat white helmet (the most heat reflective) with vents is still hot. The vents don't help much at all when your sitting at a traffic light.
I also have the Bell srt. I love it. I'm a nust under 6ft 150lb guy and it kinda makes me look like a boble head but it is a great helmet. Very wide view. Comfy with good ventilation. The only thing I have a problem with is it gets blown around alot if its slightly gusty out. Will be my cold weather helmet. Oh yea hardly any wind noise BUT!......i ride a Harley with loud pipes and at highway speeds the pipes drone in my helmet. I Do recommend this helmet
If you’ve clicked on the video because the helmet in the thumbnail looked cool and wanted to get one, just don’t. I have one (black with a rainbow tinted visor), it looks very cool and will get everyone’s attention but it’s not that safe.
One of these days, someone will have to be honest about why a brand like Shoei or Arai cost so fricken much when there are decent helmets like HJC that cost 3-5 times less: Cost of Operation and Brand. Yes, a popular brand can and will charge much higher than what they really should because they have that market value in their mind. Sometimes, their cost to create a helmet is also higher due to cost of labor and/or material as well as the features they put in but brand mark-up plays the biggest role, bar none.
I crashed my S1000RR at about 240 km/h my e faster. Top of end of forth gear. I tumbled for about 30m in waist high grass and then hit a tree. My HJC helmet saved my life. Just saying.
Great video, thanks again and happy holidays. I have two requests, and maybe you can help us: -Do you know of a modular, dual sport helmet, with built-in Bluetooth? -Will you be reviewing more higher priced helmets in the future? Thanks!
Great video! If ppl dont know SHARPS ratings are worth looking at to help when looking into buying a helmet. Plenty of cheaper helmets with 4 or 5 stars. Like exo 420, agv k3 k1 the hjc in the video ect. No excuse not to have a safe and good fitting helmet.
I don't agree with the argument that people don't want to wear a full face because of the style, but I completely disagree with the argument that it's too expensive. You can't pretty much always get one for a hundred bucks, even if that's twice the price of an open face it's really not much especially compared to the high quality helmets.
@@quikboarder93 the new ece ones fit snug enough that they are decent. i've switched back to a bell500 anyways. I ride slow and enjoy the breeze haha :)
Dude most will find this hilarious. But I have a 5XL HJC full face. The only helmets including my size only offer DOT! I want to keep my Charlie Brown sized brains.
I am tempted to check out the Bell SRT but if the visor fogs up that means my glasses are going to fog up meaning I cant see crap which kinida defeates the purpose.
I'd avoid thermoplastic shells. They shatter easily and do zero to mitigate the impact the way even fiberglass shells do. There are inexpensive helmets with better shells.
Does anybody know if motorcycle helmets protect from viruses? Since all safety masks are sold out was wondering if wearing a helmet closed would work like a safety mask?
i dont know if this is a stupid question or not, but i have my MSF class coming up in november and im wondering if i HAVE to wear a DOT helmet or if i can use better rated helmets. Getting my first one and i wanna make sure i get the best protection i can.
I'd love to hear an opinion on the LS2 Challenger GT helmets. They're light, ECE certified and stupid cheap for what they are on RZ right now. Almost suspiciously cheap. The specs look good to me but I'm finding hardly any good reviews from people I'd trust on the safety.
![АЛАУДИНОВ у Скабеевой: эти их ВСУ нас НЕ ДОГОНЯТ 😁 [Пародия]](http://i.ytimg.com/vi/an0anqU4WGQ/mqdefault.jpg)
Timestamps -
☑️ Speed & Strength SS900 - 1:19
☑️ HJC CL-17 Combat - 3:33
☑️ Bell SRT - 6:29
Take a look at the helmets on Get Lowered Cycles here: bit.ly/2rlQe2S
Thank you thank you thank you for not leaving it to your fans to make time stamps :)
What helmet is the one in the thumbnail?
@@rickygonzalez2356 Icon Airflite. I think. Check out the one with the gold shield. Hooooweee.
@@rickygonzalez2356 Whoops, it's not. Do look into the Airflite. It looks as menacing and mysterious.
What is better in terms of an all rounder. The ss900 or the icon airflite?
I dont even own a motorbike but I love watching your videos dan, one day i'll get myself a motor licence :)
Under 21 that helmet will help you though class
Same. My first if going to be a Yamaha VMAX.
Life is great on two wheels bud. Hope you get there soon !
You should just go for it. I wanted to do it for years and some people, including Dan made me go for it.
Dont even have a full license yet but man i love it. Already have gear and a ton of knowlidge by following the channel.
If its possible for you, just do it. Its a great feeling.
If you don't stop for the coppers, then u don't need a license. 👍😁
*For anyone wondering, the helmet in the thumbnail is the 'Steelbird SBA 2 HELMET'. BUILT AND SOLD EXCLUSIVELY IN INDIA*
I really wanted to see that one helmet, too bad it's not available :(
@@1FRANHER1 Check out the Icon Airflite helmet, Roof Boxer series helmet and the CrossHelmet X1, you might like it.
Lol cheers man, only reason i clicked on the video was to see the thumbnail helmet hahaha
@@TheUnihouse ikr lol
@@namr1174 it is not steelbird helmet it's an ICON airflite
My usual requirements are ECE, Pinlock, as quiet as possible, Modular, an internal sun visor, chin curtain and intercom in that order of preference. My current helmet is a matte black Shoei Neotec 2 and I have the integrated sena installed too. Ticks all the boxes, makes commutes comfortable and well worth the expense in my opinion.
I'm a new rider. Is modular still safe? I want a full face for protection but like the modulars so I can get air when I want.
@@BTFives You won't get a Snell rating out of a modular helmet, but will find plenty with an ECE rating.
Just a side note, when you were explaining the difference between more expensive and cheaper helmets you left out weight. Cheaper materials are usually heavier.
Dont waste your money on 'antifog spray'
See that dish detergent in your kitchen?
Put some on a soft cloth. Rub it all over the inside of your visor.
Presto.
Do that once a week.
No more fogging up.
The Mongoose does it work ?
This is a really old trick. I used to do this with my glasses as a kid when I played hockey.
Also, try not exhale from your mouth.
@@OBENSquad_21 No. It does not. I mean, sure it keeps the visor fog free for a couple more breaths than it would normally, in like 0 C. Tried it on multiple occasions, spoken with friends that have tried it. Pretty useless all round, be it anti-for spray, or the detergent / shaving cream method.
Pinlock is the only thing that works, and even that is heavily dependent on the helmet.
I have an AGV K1 with an installed Pinlock which is garbage, and an HJC Rpha 90 with a Pinlock that is pretty effective, yet not 100% fog proof in very cold scenarios.
@@OBENSquad_21 It does. Try it on the bathroom mirror before showring for example, you will see the difference.
Fact, DOT approved helmets are only approved for your head to survive a 13 mph crash. That will be all. My S&S helment is also E.C.E. approved and worth every penny 220usd I paid for it.
I kinda feel like this is bullshit. Source please.
Do you believe in santa?
In Australia all helmets must meet the government standards before it even gets sold in the country.
Depending on the company, there are normally members there that assist you finding the right size.
Love the videos, you do a great job. Its worth mentioning the Scorpion exo r420 is a great lid for the price.
What is the helmet on the thumbnail?
It was not shown in the video.
That thing looks wicked!
first video I have seen not BSing people that you have to buy a $400+ helmut to be safe. some of the stuff i have seen on other channels is absolute fairytale garbage.
thank you for doing this, and have a great christmas.
Costs more but some bell helmets come with a transitions shield. I love mine.
Same here, can't rate the transitions shield high enough
Just like glasses? Never seen one.
@@schwartz4074 Yes, just like my prescription eyewear
Chad Retherford I.l check it out... I need a new helmet.
Look for the bell DLX versions
i didnt see this video before i purchased my helmet but i bought the HJC CL-17 because i loved the price ($120 for me) and i knew i wanted a SNELL rating, watched some content and SNELL seems to often purchase helmets new and old and keep testing them to make sure they continue to meet their requirements which is pretty awesome.
This helps me so much man! I was hoping to get all my gear before my bike and this will definitely help! THANK YOU SO MUCH!
I came for the helmet in the thumbnail. I feel used to watch a video
It's the Icon Airflite
Steelbird Air SBA-2
@@zigeunerschnitzel4704 lol it is most definitely not.
Steelbird Helmet. And it's cheap too. Too bad they don't have a chin guard.
@@KingSlayer836 It does have a chin guard, it’s just being covered by the visor
Thank you sooo much for mentioning the head shape differences. This was something I could not talk my parts supervisor into considering, when ordering helmets and more often then not a customer had to "settle" for a helmet that was tight on the forehead and loose on the sides.
Great helmets i would add the scorpion EXO-R 710
Scorpion EXO-R420 is my favorite budget helmet. If you're intermediate oval, it's a good option that's Snell rated and several designs and colors. Pretty quiet too.
Also one of the most comfortable interiors.
They also have cheek tabs that EMT personnel can use to remove the helmet safely. It's a great helmet.
I like my exo-420, I am waiting for the new exo to drop so I can check them out. more pricy $450 range but I am hoping its lighter weight wise.
CL-17 is awesome! It is so inexpensive and I decided on it after seeing third-party research focused on safety vs affordability! I've gotten tons of compliments on the exact finish in this video!
Never buy a helmet that is DOT only. Manufacturers get to "self-certify" for DOT.
ECE or Snell and full face only. No modulars. Also make sure that you know how to fit it. If it goes on easy, it's too loose. When you buy your helmet, get some new liners/cheek pads at the same time so you can change them out when the helmet starts to loosen up. If 2-3 years when you need them, they will likely be discontinued.
Really looking forward to the developments with FIM homologation. That is going to shake things up and manufacturers will have to get their ish together.
What about ece only or snell only , is dot and ece or snell both a good combo?
Why no modular helmets?
No modulars? What about half and 3/4? Rather have a mod over those
I got a Solaric Z1R modular for $150. ECE and DOT approved. Its easier to put on my head and doesnt bother the rightside of my head where Ive had surgeries at.
i bought a speed and strength s2400. i love this helmet its ece 2205. great fit. not to heavy. it came with clear and smoke lens
We (most of us don't live in a desert - I really miss Arizona) nee to know what they are like in the rain..... Best, Pete.
Scorpion helmets are also price friendly and several models are Snell approved. Merry Christmas to you and yours, Dan.
So true. Picked up the exo-r420 on sale for black friday. Great price for a snell approved helmet with nice features like emergency release cheek pads, locking visor, decent ventilation, etc. Looks awesome too. Seem to be often skipped as a budget helmet but as a first helmet for me its really good for the price imo
@@alsav3404 The 420 also has a nice aerodynamic shape. Helps at higher speeds. I'm going on my fifth Scorpion helmet. Keep the rubber side down.
I always wear HJC ... they have the highest kite mark (UK safety testing). They are rated as being safer than helmets that will cost you $500.
So I have always worn HJC ... never had to put it the test myself thank the Gods of Valhalla.
But the British kitemark is recognized universally as being one of the best rating systems out there!
Like HJC five years before, they have recently dropped the SNELL cert to be able to add drop sunshields. Can't have a giant hole in the crown foam and a moving plastic and metal internal parts over your skull and be SNELL.
two years ago their UA-cam shillmen pushed their snell as crucial, to dis HJC and others that had flashy features for the same price. Now they magically rarely mention it.
Scorpion is a good budget helmet but noisy. Not worth over $140 though. On end of year clearance the base model is $90 from distributors.
@@alsav3404 what price did you get it for on black Friday?
My helmet was 119.00, has a chip in buckle strap for medical data, ECE 22.05 and DOT, has carbon fiber visor hinge points, drop down sun visor. Vented added last name for identification, and reflective stripes. I am a round oval.
I have had the cl 17 for 5 years now and it really is a good helmet for the price. Looking to upgrade pretty soon to a shoie rf-1200 😁
The one in the thumbnail is not listed misleading.
The helmet on the click batey thumb nail is the Steelbird sba-2
The SS900 is for sale eighth now on RevZilla. It’s under $60 with free shipping. I snagged an Evader SS900, let’s see how it performs.
I love my CL-17, very comfortable, maybe slightly big on the outside, but it breathes well with the top, forehead, and mouth closable vents. I do ride with glasses and I have added 35-40mm speakers without much trouble. Also, it does have two or three shell sizes if i'm not mistaken.
Did I hear some "Soapy Wooder"
Just picked up the bell qualifier for my girl, comes with mips protection, multi vent system, transitional visor and is a full face helmet. Got it on sale but list price isnt bad for $299.
K T they are very loud!
I bought a Torc-1 full-faced helmet recently for $199.00 It's a good helmet. I like to wear a helmet that's safe but also looks right with my vintage bike. That Bell you were wearing had a cool look to it.
The Torc T-1 is a great helmet! In case you didn't know, they are made in the same factory that makes Bells helmets.
I have been in moto store to buy a helmet there is a probleem you can't really buy what you want you buy what doesn't pressure somewhere on the head what fits and you don't have pain points so I bought shoei air 2 fits good but it's not cheap but if your head doesn't worth more it's your choice 😉
The SRT actually already comes with an anti-fog type coating to it, I'm still riding in December in Wisconsin and I only have to pop my visor open at stop signs/ stop lights because of my neck gaiter trapping my breath into the helmet. Otherwise? She doesn't fog too often
I don’t know why this channel UA-cam brought me to but I do ride motorcycles and it’s weird because I used to live in San Diego and I saw the SDC logo when this pandemic is over I’ll fly back to San Diego and check you guys out… Currently over the pond and quarantined all over the place
So...how about modular helmets? They are the only type that I can pull on without taking off my glasses.
CL -17 good, with earplugs
Love your input and info
Dan who makes that helmet at the very beginning of this video? 🗨️☝️😎
Thanks a bunch for this video , it was really really really helpful. And I was kinda undecided on that too, but I know I did want one with Bluetooth in it.
Love my Bell helmet. I have the Bell Qualifier DLX and it is great. Way more comfy than some of my friends higher end helmets and it fits the sena perfect. Super clean, couldn't recommend it enough.
Except on high speed it sucks
@@isipbatamobrogang5440 I dont go over 100kph so it's fine.
@@Braidan1180 ohh damn. Yeah its good till like 140km/hr.
I picked up an HJC i10 today for about $160 and it has Snell cert so add that to the list of affordable good helmets.
I would like to know. What make and model of the helmet with face shield down to the chin is just before this video starts?
I have a CL17...good but noisy...use earplugs. 👍👊✊
DDFM, I love, love, love your videos and the information that you provide!!! I've learned so much from you and have become a safer rider as a result!
I need a helmet and found this great guide. Thank you for what you do!!!
Ls2 do a very good sharp rated product for £70 with a lift up front and pin lock viser.... just saying...
Just picked up a fiberglass Challenger GT for $150 USD at Revzilla. For the specs and price, I couldn't beat it. Hopeful it's comfortable for my head
REALLY GOOD VIDEO, SIR. THANK YOU!
Arai’s the best bang for the buck, but damn is it a lot of buck! 8-10 year lifespan though vs. the standard 3-5
Thanks Dan. Have a great Christmas!
Awesome video. One question though... did that business go out of business? Everything I click says out of stock.
Do an updated video like this man! Please!
Thanks for the new site suggestion! I am purchasing a new glow helmet for spring and summer rides. 😊
Bell have nice features and all that stuff but the problem is they are very loud! I am very happy with Shoei
How quiet are these helmets?
thanks for the content dan!
Before you buy a helmet, get a UV thermometer (about $20 at Harbor Freight and good for many things). Get some other color helmets from friends. Get a gloss black, gloss white, flat or stain black, flat or satin white.
Set them in the sun at minimum 85 degrees for and hour+ to be sure they are fully heat soaked. Measure the temperature of each helmet. Now decide for yourself how well done you would like your brain. If you still can't decide, you've been wearing a gloss black helmet too long.
Thats a good point but at the same time most helmets have air vents to help
@@CelerityS1k I live in Nevada. On a hot day even a flat white helmet (the most heat reflective) with vents is still hot.
The vents don't help much at all when your sitting at a traffic light.
Dan I purchased the ss2100 and it is junk, bottom trim is already coming off
I also have the Bell srt. I love it. I'm a nust under 6ft 150lb guy and it kinda makes me look like a boble head but it is a great helmet. Very wide view. Comfy with good ventilation. The only thing I have a problem with is it gets blown around alot if its slightly gusty out. Will be my cold weather helmet. Oh yea hardly any wind noise BUT!......i ride a Harley with loud pipes and at highway speeds the pipes drone in my helmet. I Do recommend this helmet
If you’ve clicked on the video because the helmet in the thumbnail looked cool and wanted to get one, just don’t. I have one (black with a rainbow tinted visor), it looks very cool and will get everyone’s attention but it’s not that safe.
Bell makes a Pinlock for the SRT now.
The Bell SRT may not COME with a Pinlock but there is one available and I will say it DOES work!
Wheres that helmet in the thumbnail? 😭😭
It looks like the ICON Airflite
@@masonforbes8432 although similar its sadly not an airflite
@@masonforbes8432 I thought so too but it's not. Crap like this drives me crazy
Came for this too. Love you DanDan but this is kind of frustrating and misleading..
@Capto Pril Ive been wondering about the Steelbird's lack of US access. I see a bunch of reviews from India.
In my opinion and I definitely understand budget. But it's your noggin folks lol
What’s the helmet in the thumbnail?
One of these days, someone will have to be honest about why a brand like Shoei or Arai cost so fricken much when there are decent helmets like HJC that cost 3-5 times less: Cost of Operation and Brand. Yes, a popular brand can and will charge much higher than what they really should because they have that market value in their mind. Sometimes, their cost to create a helmet is also higher due to cost of labor and/or material as well as the features they put in but brand mark-up plays the biggest role, bar none.
Good question. Went to the MC dealer looking for helmets and you either pay $150 or $400-$500+.
I crashed my S1000RR at about 240 km/h my e faster. Top of end of forth gear. I tumbled for about 30m in waist high grass and then hit a tree. My HJC helmet saved my life. Just saying.
Will a youth helmet fit a adult? How come they don’t put shell size on the website? Is it because they won’t be able to sale anything
DOES BELL SRT HAVE MOUNTING CAMS OPTIONS
Great video, thanks again and happy holidays. I have two requests, and maybe you can help us:
-Do you know of a modular, dual sport helmet, with built-in Bluetooth?
-Will you be reviewing more higher priced helmets in the future?
Thanks!
Bro love the beanie, looks super dope.
Is the Scorpion Exo-R420 helmet any good?
Great video!
If ppl dont know SHARPS ratings are worth looking at to help when looking into buying a helmet. Plenty of cheaper helmets with 4 or 5 stars. Like exo 420, agv k3 k1 the hjc in the video ect. No excuse not to have a safe and good fitting helmet.
Thx Dan any shows on jackets? Im buying a bobber first time rider cheers!
Wich one of these is the best for ventilation?
I don't agree with the argument that people don't want to wear a full face because of the style, but I completely disagree with the argument that it's too expensive. You can't pretty much always get one for a hundred bucks, even if that's twice the price of an open face it's really not much especially compared to the high quality helmets.
What helmet is the one showing on the cover of this video please?
What helmet did you used as your thumbnail?
What’s the helmet in the thumbnail
Is there a copper and black jacket to match the third helmet
With that hat on i forgot he was bald lol
Do you have a video on higher end, more features for example sena momentum pro dual.. I’d love to hear your thoughts on similar helmets.
smell rated? so its rated to not smell?
Hi, does anyone know the name of the helmet in the cover photo?
I want the one in the thumbnail
Would you recommend the new Gargoyle X07 3-in-1 Helmet from harley davidson? I'm stuck between the full face and this one.
Does anyone know what kind of helmet that is on the thumbnail?
Thx dan
Bitwell gringo S is a good lower mid range
How is that urethane chin bar though? Sounds like it would be heavy
@@quikboarder93 the new ece ones fit snug enough that they are decent. i've switched back to a bell500 anyways. I ride slow and enjoy the breeze haha :)
How about for 2023/2024?
Dude most will find this hilarious. But I have a 5XL HJC full face. The only helmets including my size only offer DOT! I want to keep my Charlie Brown sized brains.
I am tempted to check out the Bell SRT but if the visor fogs up that means my glasses are going to fog up meaning I cant see crap which kinida defeates the purpose.
Get a pinlock ready helmet. I wear glasses and frequently ride in the rain. They’re a game changer.
I still want to see what you think about chaps versus riding pants
I'd avoid thermoplastic shells. They shatter easily and do zero to mitigate the impact the way even fiberglass shells do.
There are inexpensive helmets with better shells.
Does anybody know if motorcycle helmets protect from viruses? Since all safety masks are sold out was wondering if wearing a helmet closed would work like a safety mask?
No. It won't protect you.
i dont know if this is a stupid question or not, but i have my MSF class coming up in november and im wondering if i HAVE to wear a DOT helmet or if i can use better rated helmets. Getting my first one and i wanna make sure i get the best protection i can.
I'm pretty sure your epic beard is abrasion resistant.
I'd love to hear an opinion on the LS2 Challenger GT helmets. They're light, ECE certified and stupid cheap for what they are on RZ right now. Almost suspiciously cheap. The specs look good to me but I'm finding hardly any good reviews from people I'd trust on the safety.
There's literally no links for these helmets in the description like you said there would be.
I have the HJC it's sweet and cheap ! 👍