Just watched your video I have a pump not tried it yet you don’t seam to look for the other side of the hole looks like you placed it just near the cast ????
hi alan the worms along our part of the coast do not have blow holes just a cast so it pump and hope lol i watch other videos and they do look for the blow hole would love to have a go doing it my way to see if i can get them good luck with your pump 👍😀
Pretty much new to pumping worm. If you were freezing worm would you just put the wraps like you’ve done straight into the freezer or do you do something else? I ask because people have different methods, like blanch, dry off in sand, wrap and freeze or dry in sand, wrap in cling film, then freeze. Just looking for the best method to have a decent worm from frozen.
Hi Matt the shafts that i make are m8 with a m6 threads and the seals are made for a m6 thread i am toying with making m8 seals as a lot of my friends was using the blue or yellow seals but require lot of liquid to work if your thread is m6 i would send you some to try just pay for postage 👍👍
Hi just been out for first time with a 22mm pump plenty of cast but no blow holes so how do you know which way the worm is laying in the burrow it was a bad day
@@hastingsangler up at Yorkshire hornsea bridlingtondo I just pump the cast I watch all your videos just couldn't get any what do you think I'm doing wrong will go back out tomorrow and try again
@DaveMielczarek is there others pumping near you if no blow holes it might be like it is down here just a case of 3 to4" away from the cast then try and find the depth good luck
Dood morning dave just made a board to make some silicone washers it's a 22 mm pump I've drilled the holes 19 mm what's the best silicone to use please
@@hastingsangler great vid btw quality is great as is the info. I can't find the bait bucket liner via the link, seems to be dead. Any other places sell them? Greetings from Fleetwood 👍🏿
Great video as always, where can we get a bucket like yours and slso can i buy the rubber washers you use somewhere? I buy the tackle shop ones bjt yours look like they work much better.
Hi paul the bucket i get from www.decathlon.co.uk/p/12l-live-bait-fishing-bucket/_/R-p-197953 the washers i make myself are you local to hastings or would they need posting and how many do you need
Thanks for the bucket link. I will get 1, I am only in Eastbourne so I could pop over to get some I don't know I'd like to try some so maybe 5 I am more than happy to throw you some pennies 😂
@paultaylor5750 hi you are local I'm always over Eastbourne working for gas company you can blame me for all them traffic jams lol sure u can have 5 no problem
Great stuff to see, maintenence.. Hastings is so stony and I'm really struggling to actually get worms... Usually don't do too bad.. Is there a problem at the moment or I guess I'm doing something wrong.. Pressure Good n placement n depth seem ok but getting a worm every 30 goes... Ah ok its the heat n I was too deep.. Yea thinking about it it was when I tried a shallower hit they were coming up... Thanks Mt.. Gonna try Bexhill..cya Ah also maybe I over tightened in frustration.. Hahaha Mt only 45 minutes for so many !!
Hi jamie thats the 1st thing every 1 does when not getting the worms is tighten the pump up then it goes downhill fast in this hot weather they seem to be shallow good luck👍👍👍
You make that look so easy but i know its not. I cant find any blacks just blow where i am but i know there about have you any tips on the places to look or is it a case of keep looking for them. Cheers
@@seanleicester4018 the fastest way to find out is ask the local tackle shop is blow lug your goto worm or do they import black lug from another location becaus i know my friend sends lots of bait up to the north
Just watched your video I have a pump not tried it yet you don’t seam to look for the other side of the hole looks like you placed it just near the cast ????
hi alan the worms along our part of the coast do not have blow holes just a cast so it pump and hope lol i watch other videos and they do look for the blow hole would love to have a go doing it my way to see if i can get them good luck with your pump 👍😀
Nice tutorial mate. Tea's on you next time lol
jeff i need to sell a few more pumps for yours and gingers lol👍😀😀👍
Hi Dave great video you make it look so easy 🥵🥵 could you please tell me where you got the insert for your bucket 🪣👍
Hi gary hope this helps www.decathlon.co.uk/p/12l-live-bait-fishing-bucket/_/R-p-197953
Thanks Dave much appreciated keep up the good work 👍👍
Pretty much new to pumping worm. If you were freezing worm would you just put the wraps like you’ve done straight into the freezer or do you do something else? I ask because people have different methods, like blanch, dry off in sand, wrap and freeze or dry in sand, wrap in cling film, then freeze. Just looking for the best method to have a decent worm from frozen.
Hi what I do is wrap them in paper in bubbles of 50 then then freeze
Great videos. How best to contact you to buy a 22mm copper pump?
Hi do you have Facebook if so I am Hastings angler on there I need to sort a better way for people to buy the pumps
@@hastingsangler Yes - dropped you a message there but wasn't sure if you'd see it as sometimes goes in to message requests
@altonphotography hi thank you soon as I get home il get in contact
Thank you. About time i started collecting my own worms . I shudder to think of how much I've spent the last 45yrs. 🧔 👍
Hi Bob worms are not cheap now plus think of the exercise too 😂😂😂😂😂
@@hastingsanglerhow much do you sell these pumps & seals for mate.
You make it look so easy,definitely going to try myself.Great videos 👍
Hi Dave the copper pumps are £45 and stainless £65 postage is £13 unless you are local
How can i buy one
hi robert if you have facebook dm on there please
Great video i always enjoy watching your videos. Do you supply bait pumps and do you post them to Ireland?
Hi Tony I do build the pumps and I can post them
@@hastingsangler Do you have an email address i can contact you at?
Great video, how much would it be for a few seals posted to Newport South wales?
Many thanks Matt.
Hi Matt the shafts that i make are m8 with a m6 threads and the seals are made for a m6 thread i am toying with making m8 seals as a lot of my friends was using the blue or yellow seals but require lot of liquid to work if your thread is m6 i would send you some to try just pay for postage 👍👍
Hi just been out for first time with a 22mm pump plenty of cast but no blow holes so how do you know which way the worm is laying in the burrow it was a bad day
Hi Dave where abouts are you pumping bait down at pett where i pump u dont get blow holes just casts
@@hastingsangler up at Yorkshire hornsea bridlingtondo I just pump the cast I watch all your videos just couldn't get any what do you think I'm doing wrong will go back out tomorrow and try again
@DaveMielczarek is there others pumping near you if no blow holes it might be like it is down here just a case of 3 to4" away from the cast then try and find the depth good luck
@@hastingsangler thanks a lot for your advice will keep trying
Dood morning dave just made a board to make some silicone washers it's a 22 mm pump I've drilled the holes 19 mm what's the best silicone to use please
Excellent as usual mate thanks for the video 👏👏👏
Glad you enjoyed it👍👍
What camera are you using?
hi im using a gopro 10 with it fixed to the pump on the close ups
@@hastingsangler great vid btw quality is great as is the info. I can't find the bait bucket liner via the link, seems to be dead. Any other places sell them? Greetings from Fleetwood 👍🏿
@@thelmaviaduct hi try this link www.decathlon.co.uk/sports/predator-fishing/livebait-fishing-buckets
@@hastingsangler can I buy a dozen bungs from you please?
Thank you for all your hard work.
Thank you kindly.
Good tutorial.
Cheers m8.
Thank you in taking the time to post👍👍
Great vid mate
Glad you enjoyed thank you
Nice one mate, I struggled this morning at bexhill 😥 got enough for a session though😅
hi bob hope your well mate i went this morning down at pett had a nice bucket full👍👍👍👍😀
@@hastingsangler i would have had a bucket full if i used a yoghurt pot 🤣🤣🤣
Was it that bad mate when are you up for a fishing session next
Another great informative video Dave 👍
Hi Nigel cheers mate hope your doing well 😊😊😊 i
Great information as usual
thanks alot mark👍😀👍
Brilliant as ever 👏👏
Thank you simon for watching and taking the time to post😇😇😇
great vid xx
Hi Dave thank you see you soon lol
Great video as always, where can we get a bucket like yours and slso can i buy the rubber washers you use somewhere? I buy the tackle shop ones bjt yours look like they work much better.
Hi paul the bucket i get from www.decathlon.co.uk/p/12l-live-bait-fishing-bucket/_/R-p-197953
the washers i make myself are you local to hastings or would they need posting and how many do you need
Thanks for the bucket link. I will get 1, I am only in Eastbourne so I could pop over to get some I don't know I'd like to try some so maybe 5 I am more than happy to throw you some pennies 😂
@paultaylor5750 hi you are local I'm always over Eastbourne working for gas company you can blame me for all them traffic jams lol sure u can have 5 no problem
Great stuff to see, maintenence.. Hastings is so stony and I'm really struggling to actually get worms... Usually don't do too bad.. Is there a problem at the moment or I guess I'm doing something wrong.. Pressure Good n placement n depth seem ok but getting a worm every 30 goes... Ah ok its the heat n I was too deep.. Yea thinking about it it was when I tried a shallower hit they were coming up... Thanks Mt.. Gonna try Bexhill..cya Ah also maybe I over tightened in frustration.. Hahaha Mt only 45 minutes for so many !!
Hi jamie thats the 1st thing every 1 does when not getting the worms is tighten the pump up then it goes downhill fast in this hot weather they seem to be shallow good luck👍👍👍
You make that look so easy but i know its not. I cant find any blacks just blow where i am but i know there about have you any tips on the places to look or is it a case of keep looking for them. Cheers
Hi Sean what part of the country are you mate
@@hastingsangler im in dumfries and galloway south west scotland
@@seanleicester4018 the fastest way to find out is ask the local tackle shop is blow lug your goto worm or do they import black lug from another location becaus i know my friend sends lots of bait up to the north
okay il ask them and see what they say just going to pump some blow just now 😀
@@seanleicester4018 good luck happy pumping 👍👍