SideStage Pro Rod Rack Walk Through
Вставка
- Опубліковано 16 жов 2024
- In this video, we give you a full walk through on the operation and installation of the SideStage Pro horizontal rod stager and discuss scenarios where it is applicable.
Product Page:
www.yakattack....
The locking system is awesome and addresses issues I had in the past with another brand’s side stage system. I lost a rod when I was landing a fish and didn’t even realize it until after I released the fish.
Have you guys tested it on a Jackson Knarr to see if it could replace those vertical rod stagers?
I’m assuming it would have to be done with the normal version.
Can I mount it on Hobie PA?
Absolutely, but you would need attachment points on the H-Rail. The perfect job for a 2-Pack of our MightyMount Duos.
www.yakattack.us/mightymount-duo-rail-adapter-two-pack-compatible-with-hobie-h-rail/
@@YakAttackKayakFishing Ok. I’ll place an order.
Thank you from Spain 💪
Can you do a on water video of you paddling with it stalled?
The SideStage and SideStage Pro are products focused at pedal drive and motored kayakers, not for paddlers. A horizontal rod stager makes paddling quite difficult.
I have an Ascend H12 and it's paddle only, and this is a problem for me. However, I got around it by having my rods face the back of the kayak, so the rod handles are next to me in the seat, and the rod tips are out of the back of the kayak. This works great for me.
Would I have to install another mount on the old town 120? I see in the video it’s only on one of the stock mounts
Can you move the flip grips closer together so they aren’t spread apart so far?
I know I'm not from YakAttack but yes you can. However, you have to be aware because they have to go into a specific spot between the slots, because otherwise they pop off. Also, you have to have room for the locking mechanism to engage.
Does the pro version also have the ability to adjust how far off to the side of a kayak the stager comes out like in the non-pro version?
The adjustment that allows you to set the positioning of how far off the ClickTrac is from the mount is the same on the pro and standard model.