Hi that's cool. It's my first time on your channel 👍. I got myself one a few days ago to see if I can get the hang of driving RC before putting a lot of money into a car. Sofar I've found out it's a lot of fun and I suck at driving 😂. I have had problems with mine after only a few hours one it was squeakey in reverse and soon got worse two a hair wrapped up on the rear right axle and pulled the axle gear away from the pinion. I've stripped it down cleaned and greased it and it's sweet. I did notice the gear on the rear axle had moved off centre and pushed back with little effort. I think the rear axle is it's week point and needs a mod to hold it tight
Welcome! I have taken these little 1/43 scale cars apart enough to confidently say I know my way around them well now! 😂😂😂 As for the pinion gear, if it's where you want it.. a small drop of super glue would hold it for good! I have been kinda experimenting with different gear mesh tightness and can't decide if I like it very loose.. Enough for it to coast awhile or having it a little tighter for a drag brake effect as that seems to make them a little more controllable! 😂👌🏿
@@FrequentFlyerRC turns out those 2 pins aren't working anymore, neither front lights, so careful with this way 🤣🤣🤣 Going with it's own lipo for video btw
Cool FPV mod you did there Jamal👍👍😎😎👍👍
Thanks man! I appreciate you watching too 💪🏿
Really nice mod and run FF.
Thanks bro! 👍🏿
Nice mod man! I'm doing this on a 3d printed body, did you find out the pins that only send current while ON?
Nope!
Daamn nice video well done
Appreciate it, glad you enjoyed it 👍🏿
Ended up ordering the one in ur link
Careful application of a little bit of clear Scotch tape would temporarily solve the problem of the camera coming off of the magnetic base
Thanks man and thanks for watching! Will try to remember next time👍🏿
😊awesome 😮
Thanks man! 💪🏿
Thats pretty cool, how long does the battery lasts ?
About 35 minutes 👍🏿
Hi that's cool. It's my first time on your channel 👍. I got myself one a few days ago to see if I can get the hang of driving RC before putting a lot of money into a car. Sofar I've found out it's a lot of fun and I suck at driving 😂. I have had problems with mine after only a few hours one it was squeakey in reverse and soon got worse two a hair wrapped up on the rear right axle and pulled the axle gear away from the pinion. I've stripped it down cleaned and greased it and it's sweet. I did notice the gear on the rear axle had moved off centre and pushed back with little effort. I think the rear axle is it's week point and needs a mod to hold it tight
Welcome! I have taken these little 1/43 scale cars apart enough to confidently say I know my way around them well now! 😂😂😂
As for the pinion gear, if it's where you want it.. a small drop of super glue would hold it for good! I have been kinda experimenting with different gear mesh tightness and can't decide if I like it very loose.. Enough for it to coast awhile or having it a little tighter for a drag brake effect as that seems to make them a little more controllable! 😂👌🏿
I've just tested the pins and from the screw pin1 is gnd and pin3 is vbat, and works only on power ON so let's go!
LET'S GO!!! I Appreciate it bro💪🏿💀
@@FrequentFlyerRC turns out those 2 pins aren't working anymore, neither front lights, so careful with this way 🤣🤣🤣
Going with it's own lipo for video btw
Don't you own a multimeter and other related test equipment ?
Yup, that's how I usually do it but wanted to show how you can do without it 👌🏿
@@FrequentFlyerRC do they make even smaller fpv cameras ? I know nothing about fpv
Why not do 2 cameras?
That would be CRAZY! 😂😂😂
@@FrequentFlyerRC 2 angles
Where can I get the camera?
Get the little FPV box here:
sniclo.com/products/race480-fpvbox-1-pcs-for-q25-r27
like the office
wondering what busy-ness it is
join if its cool
Court! 💀