Uhm that's the game I think or if you use a laptop then your gonna need game booster and make sure the speakers good and updated that should work but u may have broken it
PLS READ READ READ MAKE THIS TOP COMMENT FOR EVERYONE TO KNOW HOW TO FIX!SO EVERYONE KNOWS, IF YOU MAKE EVERYTHING CRASH AND YOU CANT GET IN BECAUSE YOU CLICKED START WITH WINDOWS. WHEN YOU LOG IN TO WINDOWS, PRESS AND HOLD CONTROL, IT BYPASSES THE MSI AFTERBURNER AND WILL SET CLOCK SPEEDS ETC TO DEFAULT!!!
I'm here in 2022 and this did wonders for me. I could finally crank up the resolution in my games and still get 15-20 more fps. Thank you for the amazing video
WHY IS THIS NOT THE MOST UPVOTED- if your system csnt handle a clock speed and crashes the computer everytime it tries to restart itl keep trying to apply a clock that wont work !!!
Ludde 22222 you know it’s stable when there are no crashes, black screen, when stress testing/benchmarks/games. Don’t be scared when this happens. It’s normal. Just reboot. You can only get so far without adding more voltage to the chip, +2-5mv for nvidea and amd. If you’re heat is less than 80 degrees on full load keep going. 2 things will happen. You’ll get to a point where there is a loss in performance or too much heat. You need to find a balance. For example my gtx 970 is stable: mV: +50 Core: +120 (1512mhz) gaming +130 for benchmarks. Memory: +300 (1903 x 4 = 7600mhz) User defined fan curve on auto. 75 degrees stress tests 70 degrees gaming. I set fan speed 65% for 70 degrees and auto increments. I could probably push to 1555 because I’m still getting more performance out of it, but that’s enough for now. I predict +87mV for that speed.
i now this is an old vid so hopefully you realized this since making the video, but you should NEVER select "start with windows" until AFTER you already found your max overclock.. Otherwise incase your pc gets into a crash loop and nothing is responding and you cant turn off the OC because nothing is responding, you can always reset your pc as an emergency way to undo the overclock and get stable again.. But if you have it set to start with windows you dont have that option. Youll reboot your pc and immediately jump back into an unstable crash mary-go-round. Once youre stable and youve ran benchmarks and stress test and everything is confirmed perfect, have at it. launch that puppy with windows all you want. but not before. Just my opinion though that nobody asked for. To each their own.
I made this mistake and my shit went completely nuts when I jumped mem clock from 700 to 800. Had to shut my system down with the atx button. Luckly upon reboot. it was stable and I was able to go back to 700. I guess not running kombuster stress test right off the bat was the only thing keeping it stable for the moment. shit! hahaha. Kinda had me worried. Was already drafting an angry letter to Panjno in my head.
At first I was kind of holding back from using this video because he changed the title, but after overclocking myself I realised nothing has changed in those three years. :)
Description of the video says: "Due to factors beyond the control of Panjno, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result." So yeah.
@@franco7064 Im talking about the average temp. This is justfact. When the temp is lower the life is longer. Does not matter how big or small Im sorry if you are that stupid to respond on comments that are more then 3 months ago
@@Duijnkiller are you still drooling and banging on your keyboard dent head?... And to defend a 3 month old post of yours? Def somthing a dent head would do.
READ: This CAN increase your temperatures. Specially if you set your GPU fan speed to a static speed meaning it will stay at whatever you set it to no matter how hot or cold it is. And if you increase the power limit and temperature limit, this is basically allowing your GPU to draw more power which almost always means higher temperatures and it will not thermal throttle as quickly as it would before. I'm not trying to scare you away from overclocking. It's fun and it can give you better performance in most cases. Just make sure you UNDERSTAND what you are doing. AND *THAT THIS WILL VOID YOUR WARRANTY*. At least in most cases. Refer to your manufacturer if you want to know this or google it. Few parts actually allow for overclocking without your warranty being voided. I don't know why that isn't mentioned in the video but just keep it in mind. DONT over clock if you dont want your warranty voided its simple. If you do go for it which I hope you will, check your temperatures every now and then specially a few minutes into playing to make sure they're under control. Generally you DONT want your GPU running any hotter than 75 °C (167 °F) for long periods of time. Keep it close to a comfortable 70 °C. I STRONGLY recommend setting up a fan curve instead of using the slider. If you do not know how to do this or don't understand anything else I have mentioned, please look it up. I also STRONGLY recommend if you don't feel comfortable with overclocking yet, don't change the temperature limit. This will ensure that if your card starts to overheat because you accidentally set the fan speed to 0 or something and started playing that the GPU will slow itself down to ensure it does not do any damage to itself and if the temperature still rises it will shut your system down to prevent further damage. If you increase the temperature limit this will happen at a HIGHER temperature.
His video is trash, there's no reason to have your gpu at a constant fan speed, its not going to decrease your performance on auto unless you're being thermal throttled which is very unlikely, what it will do is wear down your gpu fan's so they break quicker.
Hands down, the most easiest and detailed guide that doesn't overwhelm you. Got my GPU overclocked and it couldn't have been done any better without this video. Thanks a lot!
Don't ever hit autoapply before getting to a stable clock. Please pin this - I had to go through safe mode and uninstall afterburner because my video driver doesn't crash. It hangs. If you find yourself in that situation, hold ctrl right after logging into windows to prevent afterburner from applying the settings. Wish I knew it sooner.
This video was so helpful. Thank you for your clear language. So many of these types of videos tend to sink into a pool of jargon and don’t get to the point.
I would personally wait to make sure the application/settings are automatically configured when Windows starts up/reboots first. Less hassle if you get into blackscreens and have to rearrange the numbers. Both solutions are good. Thanks for bringing something to our attention.
Thanks for showing the actual "crash" and how easy it was to reset took alot of the concern out . Just bought my first very decent computer and wanting to see what it has .
I know Panj already said this, but it's EXTREMELY important that you let the stress test run for at least 5-7 minutes under your GPU's max clock rates. The last thing you'd want is to crash in the middle of a serious moment during a long gaming sesh, due to the fact that the GPU is being driven insane over clocks speeds that are too high for the long term.
not just stress test. You need to actually test it on demanding games. I tried mine on assassin's creed and it crashed in game while running fine on stress testing. Might be a good help fine tuning everything.
Don't refer to your last clock that wasn't artifacting as STABLE just because it survived a few seconds of Kombustor. Far longer testing needs to happen before you can determine that
You've helped me with a nice clear video so let me help you a bit - invest in a pop filter for that mic, it will remove plosives (that popping noise) every time you say a P or any letter that releases a fair bit of air from your mouth. The pop filter catches the air that is released and records nice, clear, crisp audio without those audible pops.
I don't know man. I think that he has a pop filter because I can't hear any "wind". But the "p" is very audible. I think it's due to post-processing. Just my experience.
i know this is an older vid, not sure if youll read this comment. But, thanks to you, i managed to get +140 on the gpu and +650 on the mem for my 2060. i can now play squad without any freezing in high intensity firefights. thank you so much bud. subbed for saving my sanity!
i was adding +40 on the core clock without clicking the check and i was like wow its really good and then i clicked the check and my whole monitor glitched but its all good now :D
Mr Dura lol I went up to 500 and I was kinda getting worried than I hit the check mark and both my monitor went blank and now it’s all good and I’m able to go up to 220 with 1995-2010 MHZ!
I actually got 200 core clock and 450 memory clock, i actually thought that i could only go up about like 50 or some thing but man your voice is so pleasing i tried higher values and it worked perfectly
When I put my fan speed to max (100%) it was so loud, I shit my self and instantly, turned it back to auto cause I thought my computer was going to blow up! 😂
"You should never be getting to tempertures this high unless there is something severely wrong with your PC anyways" Me watching my temp go to 98C: ... Oh
im freaking out, im at +2150 mhz and im only just seeing my frames drop. i dont like this.... my house is levitating from my fans being cranked to 100%
Have the same card dude. We actually overclocked super close to this video. Secondly I'd like to mention that you can adjust your fan/temp profile. I have my normal non-gaming fan speeds running at like 15% but then when I'm gaming my temps go above 62C and then my fan speeds ramp automatically to 70% and it goes up from there. Since I'm immersed when gaming I don't notice the high fan speeds
Using the artifact detector seemed like the best method for me. Run the stress test for about 1000-1500 frames and it lets you know as soon as you get any graphics issues. Got to +100 on the core, +925 on the VRAM without any artifacts (fullscreen 1080p). Great tutorial, even 2 years on!
@@akacaali That means that there are no hitches or texture problems, but you need to tone down the memory and core clock a bit, core clock by -10 and memory clock by -50.
instructions unclear, my computer turned my house into a harrier jet, and used the processing power to ascend beyond human levels of intelligince and becoming a singularity. It also materialized a girlfriend for me as a thank you for me giving him his powers
@@blumac9801 I've been watching this guy for a while, he's constantly updating his videos, making new tutorials if things change throughout the years. Overclocking is the same as it's been since 2017 so instead of making the exact same video just to type 2019 at the end of the title is wasted time and effort. So if things ever change concerning overclocking he would make a new video, trust me!
This was great. I overclocked my 3060ti from 1695mhz to 1995mhz and the memory from 7000mhz to 7300mhz. I didnt see any artifacts, I just didnt want to overclock to aggresively. I feel safe the way it is. My CPU is a 5600x overclocked from 3600 to 4500mhz.
you have to be careful, manufactures set this gap. on the memory, because, the termal pads lose their ability to disipate hot on time to time, so be careful and change your termal pad regularly, at least 6 months - 1 year depending on your pc usage. regards. jat, i burn a 1080 ti because of this.
It's very important to use a quantifiable benchmark to test memory overclocks. gPU memory has error correction. You may reach a point where you don't have any graphical errors, but you lose performance because the memory is correcting errors.
Thx bro you help me a lot! Here is my results when playing "fortnite" *Before overclock*: 60 fps - with a lots of drop frame *after overclock*: 120 fps - *no* lag - and *no* frame drop! Thx bro!!
@@maxamphetamines it actually gets really good my gtx650 usually gives me 120-140fps in csgo ill overclocled it a lil just the fps went 160-220 and the max temp after 3 hours was 71°c soo its really good if you overclock correctly
Great video for new overclockers but I disagree on one thing; do not apply 'start on windows boot', if you overclock to high your booting will be stuck in a cycle of crashing and it's annoying to revert it. Other then that, great video
@@DuoXCity I realized a bit later that none of my games would even startup on that high of settings, even though the stress test would ???? I have it at 160 right now, but the memory speed is definitely not as high as he said it can be. It's around 120 currently
overclocks pc at 6:00 am and pc sounding like a military jet, me with noice cancellation headphones playing witcher 3 at full graphics with a radeon r9 360 with a smirk on my face getting 200 frames......seems ok
I will turn my fan speed to 100% and when my parents ask me what's that noise, i will tell them that the laptop has become old and the temperature is constantly increasing, maybe we should sell this one and get a better stable computer. HEHE BOII.
I watched many other tutorials before this one, and none of them were as detailed and well-explained as this one. Thank you, good sir! Liked the video, and hats off to you.
Bro you helped me so much, I was getting unconsistent frames between 80-144 and even when I capped them at 80 my game didn't feel smooth (probably frame times issue) and after OC with your help I'm getting 120-144fps with no stutters, game is just smooth as butter. Love you
@@m3m._-440 i never tried it but i think the same thing. When it is done Well you are fine and this Guy tell you the right way To do it, just dont skip the steps
to everyone who got worried when they’re computer froze. Don’t worry don’t touch anything your computer will turn back on fine and you can turn it back down!
You made it easy by cutting out the clutter other people tell you all the stuff you don't really need to know and it leads to confusion. Thanks for the guide
This guy comentates so good he can probably convince me commit a crime and make me feel like it was a good idea
Like Morgan Freeman.
Speech: 100
Thanos is that you?
dont tempt him
Hhahayauahhahahhaha
thank you my computer will now keep me warm through winter :)
Haha THIS
ua-cam.com/video/DcrwasQGZag/v-deo.html
long enough to get the sweats
@@ffancy hahahahaha
@@ffancy selsiass
Get it
My pc went from dead silence to warzone teammate footsteps
Best comment of 2020 lmfao
Uhm that's the game I think or if you use a laptop then your gonna need game booster and make sure the speakers good and updated that should work but u may have broken it
@@NaderVaderYT it was a joke...
NaderVader it was a joke bro.. 😂
Search for how to undervolt it
I scared my grandpa when I cranked up the fan speed to max. He thought it was a bomber.
lol
Flashbacks to the war
*ptsd intensifies*
vietnam war flashbacks
@Simmon gameing ROBLOX Dang, why you gotta call it "1900s stuff".. making me feel old AF! 😑lol
If your pc explodes, well that’s normal just wait for it to respond
I got blackscreened. Whats the issue?
@@skatergator2222 mine was scarier mine completely shut down and started to beep at me xD
If ur pc exploded.. Start all over again..
Lmao right! Telling ppl to use the startup feature and just crank the core clock and voltage all the way up.
@@shabazz717 except, he didnt tell anyone to crank the voltage or the core clock all the way up....
PLS READ READ READ MAKE THIS TOP COMMENT FOR EVERYONE TO KNOW HOW TO FIX!SO EVERYONE KNOWS, IF YOU MAKE EVERYTHING CRASH AND YOU CANT GET IN BECAUSE YOU CLICKED START WITH WINDOWS. WHEN YOU LOG IN TO WINDOWS, PRESS AND HOLD CONTROL, IT BYPASSES THE MSI AFTERBURNER AND WILL SET CLOCK SPEEDS ETC TO DEFAULT!!!
You a plug
Lil balloon XD
Ty bro
for me it reset the thing when windows BSOD
yeah never press that button and of course not while testing the overclock, thats just making life more difficult for yourself
i put my fan speed to 100% didn't realise my PC could transform to a PS4 :/
Jordan so your computer is potato :P
(I thought that his pc recived a performance boost from the better cooling and became as good as a PS4)
Michał Krzyżanowski it’s a joke and he’s making fun of the PS4 being loud.
@@michakrzyzanowski8554 you are potato :P
True
A Jet Engine for me
I'm here in 2022 and this did wonders for me. I could finally crank up the resolution in my games and still get 15-20 more fps. Thank you for the amazing video
Do not Apply settings on Windows Startup until you know it is Stable.
Welp.
how do you now its stable
WHY IS THIS NOT THE MOST UPVOTED- if your system csnt handle a clock speed and crashes the computer everytime it tries to restart itl keep trying to apply a clock that wont work !!!
@@bobjoeshmoe1354 I know it's ridiculous, however, I used a restore point and it fixed it perfectly.
Ludde 22222 you know it’s stable when there are no crashes, black screen, when stress testing/benchmarks/games. Don’t be scared when this happens. It’s normal. Just reboot.
You can only get so far without adding more voltage to the chip, +2-5mv for nvidea and amd. If you’re heat is less than 80 degrees on full load keep going.
2 things will happen. You’ll get to a point where there is a loss in performance or too much heat. You need to find a balance.
For example my gtx 970 is stable:
mV: +50
Core: +120 (1512mhz) gaming
+130 for benchmarks.
Memory: +300 (1903 x 4 = 7600mhz)
User defined fan curve on auto.
75 degrees stress tests
70 degrees gaming. I set fan speed 65% for 70 degrees and auto increments.
I could probably push to 1555 because I’m still getting more performance out of it, but that’s enough for now. I predict +87mV for that speed.
Bro wtf I turned the fan to 100% and my pc flew away
This is my favorite comment
*Flew away
@@JDubsPub Damn you had to do it, also I'm not english so there can be mistake in what I write.
@@phillipebolduc6947 I was just being helpful. I didn't criticize you or talk down to you. Sorry for trying to be nice and help. :)
my 2080titan is a chopper too XD
me: sets speed fan speed to 100%
my graphics card: FWAAAAAAAAAAAAAA
Fax
😂😂😂😂😂
same loll
LOL 😂
I DID THAT AND IT SCARED ME BECAUSE I MISSED THE SLIDER FOR TURNING IT DOWN LMAOO
i now this is an old vid so hopefully you realized this since making the video, but you should NEVER select "start with windows" until AFTER you already found your max overclock.. Otherwise incase your pc gets into a crash loop and nothing is responding and you cant turn off the OC because nothing is responding, you can always reset your pc as an emergency way to undo the overclock and get stable again.. But if you have it set to start with windows you dont have that option. Youll reboot your pc and immediately jump back into an unstable crash mary-go-round.
Once youre stable and youve ran benchmarks and stress test and everything is confirmed perfect, have at it. launch that puppy with windows all you want. but not before.
Just my opinion though that nobody asked for. To each their own.
True
Thank you
This is basically what safe mode booting is for
@@LMS887 yeah booting in safe mode is your emergency way of getting it going again. I made that mistake one time and I'll never do it again.
Yes this happens to me a while back. I had to uninstall windows and reinstall everything.
DO NOT APPLY AT WINDOWS STARTUP TILL YOU HAVE FOUND A STABLE OVERCLOCK AND DONE MULTIPLE TESTS
altrin same
altrin try using a restore point
I made this mistake and my shit went completely nuts when I jumped mem clock from 700 to 800. Had to shut my system down with the atx button. Luckly upon reboot. it was stable and I was able to go back to 700. I guess not running kombuster stress test right off the bat was the only thing keeping it stable for the moment. shit! hahaha. Kinda had me worried. Was already drafting an angry letter to Panjno in my head.
@altrin Boot windows into safe mode and remove MSI afterburner.
Chris how do i do this bro
Video published: 2017
*Changes title to 2020*
*Profit*
Kofi Kwakyi pretty sure he meant works in 2020. And wanted profit.
He said he's gonna be keeping the GPU for 2-3 years can we get an F in the chat for the GPU😢
At first I was kind of holding back from using this video because he changed the title, but after overclocking myself I realised nothing has changed in those three years. :)
So what that he changed to 2020. Works just the same. Hes gotta eat 2
@@matejgalfy9449 F
I like how you reassure that everything will be fine cause I’m forsure gonna panic
I am panicking right now!
@Proximious mine pulled a Bsod the second i hit apply so i panicked hard about 4 minutes ago
Description of the video says: "Due to factors beyond the control of Panjno, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result." So yeah.
"Ultimate Easy Guide 2020" *Releases video in 2017*
Time traveller, he just knew
✨That’s called “Editing The Title”✨
@@darkhost6509 could be updated in the future tho
It means it still works in 2020
Hey look... ur profile pic was going to be what my comment said
Let’s be real who else just immediately turn the fan speed up to hundred percent
That was the first thing i did when i get my gaming laptop.
Literal jet engine
i don't care about sound, i just want it to be cool
Me
@@dkincorporated3060 XD SAME
Instructions clear, managed to overclock my gpu.
@@Duijnkiller Just not true considering most GPUs stock temps go over 70c lol
@@Duijnkiller if you dont wanna be an idiot stop posting
@@franco7064
Im talking about the average temp.
This is justfact.
When the temp is lower the life is longer.
Does not matter how big or small
Im sorry if you are that stupid to respond on comments that are more then 3 months ago
@@Duijnkiller shhhh settle down dent head
@@Duijnkiller are you still drooling and banging on your keyboard dent head?... And to defend a 3 month old post of yours? Def somthing a dent head would do.
READ: This CAN increase your temperatures. Specially if you set your GPU fan speed to a static speed meaning it will stay at whatever you set it to no matter how hot or cold it is. And if you increase the power limit and temperature limit, this is basically allowing your GPU to draw more power which almost always means higher temperatures and it will not thermal throttle as quickly as it would before.
I'm not trying to scare you away from overclocking. It's fun and it can give you better performance in most cases. Just make sure you UNDERSTAND what you are doing. AND *THAT THIS WILL VOID YOUR WARRANTY*. At least in most cases. Refer to your manufacturer if you want to know this or google it. Few parts actually allow for overclocking without your warranty being voided. I don't know why that isn't mentioned in the video but just keep it in mind. DONT over clock if you dont want your warranty voided its simple. If you do go for it which I hope you will, check your temperatures every now and then specially a few minutes into playing to make sure they're under control. Generally you DONT want your GPU running any hotter than 75 °C (167 °F) for long periods of time. Keep it close to a comfortable 70 °C.
I STRONGLY recommend setting up a fan curve instead of using the slider. If you do not know how to do this or don't understand anything else I have mentioned, please look it up. I also STRONGLY recommend if you don't feel comfortable with overclocking yet, don't change the temperature limit. This will ensure that if your card starts to overheat because you accidentally set the fan speed to 0 or something and started playing that the GPU will slow itself down to ensure it does not do any damage to itself and if the temperature still rises it will shut your system down to prevent further damage. If you increase the temperature limit this will happen at a HIGHER temperature.
@@AM-oq9lb i was literally about to go there wtf u psychic
Ur at 69 SUBSCRIBERS
you should be safe under aproximately 70-80 degrees, if you were to google it says 80 but I would personally keep it lower
Matin l
what about over clock gpu's? will the warrant be ok?
the RGB you put around the like button shows your dedication, that DEFINETLY deserves a like and a subscribe
The sign of a great teacher is being able to explain something complicated in simple terms. Here was a great example of that. Awesome video 👍🏻
yep
@•. Shirocho .• bruh
@alex_artedits252 haven't u still overclocked ur gpu yet?
His video is trash, there's no reason to have your gpu at a constant fan speed, its not going to decrease your performance on auto unless you're being thermal throttled which is very unlikely, what it will do is wear down your gpu fan's so they break quicker.
ok simp
Hands down, the most easiest and detailed guide that doesn't overwhelm you. Got my GPU overclocked and it couldn't have been done any better without this video. Thanks a lot!
Don't ever hit autoapply before getting to a stable clock. Please pin this - I had to go through safe mode and uninstall afterburner because my video driver doesn't crash. It hangs. If you find yourself in that situation, hold ctrl right after logging into windows to prevent afterburner from applying the settings. Wish I knew it sooner.
Right I spotted this pit for watching this video I can't believe he didn't say it
Bro thanks you this was my first time and I thought my pc was done for🥲
still no pin
Yep this happened to me too and My PC had ALOT of black screens and the blue screen of death everytime I started my PC!
What graphics driver did you have?
This video was so helpful. Thank you for your clear language. So many of these types of videos tend to sink into a pool of jargon and don’t get to the point.
Agreed
i overclocked my wrist by wearing 2 watches
edit: wtf happened here lol
not ok man
Damn now how hard could u flick in games
Weird flex
I got on 2 watches, I still come through late!
HmmHm niga u got me
When you overclocked your dad's office computer's gpu that it turns into a nuclear reactor:
*Tehc*
Exotic *turned into a bomb*
@@mudalad1215 *nuclear reactor*
@@mudalad1215 you forgot to say eat your cereal
@@mudalad1215 is this a joke video?
Tek
Turned my fan speed to 100. My system started levitating
Armando Zertuche LOL
😂😂😂
@@RhubarbRehab lmao
lol
If you machine flies forward or that stuff make sure your computer isn’t a mini UFO
I would personally wait to make sure the application/settings are automatically configured when Windows starts up/reboots first. Less hassle if you get into blackscreens and have to rearrange the numbers. Both solutions are good. Thanks for bringing something to our attention.
i went from 120 fps to 121 fps thank you :)
LOL 1 fps
Me 20 FPS to 1
Oc YoUr CpU
Amazing
@@ramillax5478 is it even worth oc like my fx 8350 , i hate that fucking cpu , it is so bad its unbelievable.
Thanks. Now my computer can run Chrome Dino at 60FPS
😂😂😂😂😂😂😂😂
Lol I run r6 at like 4 fps
Thank you! I can now play minesweeper with over 15 fps!
Dude I actually can open minesweeper and get passed the menu!!!!
Dead meme
You do know they have computers in a non-box shape?
Just cause you die doesn't mean you go to hell. Which hell cannot logically exist because of the fundamental behind it. No brain = no pain.
i can now play pacman v0.1 at 5 FUCKING FPS
The fact this video holds up years later, shows how good this dudes videos are.
Who else panicked when there pc just killed itself for a second
Me
he clearly stated that would happen, worry wart
Is graphics card is important for this settings?
@@Muhammad-Awais15 godzilla had a fucking stroke trying to read this
@@zuccsucc476 What do u mean?
"puts fan speed all the way up" Brother walks in "is that a fighter jet going over our house"?
HAHAHAHAHAHAHAHAHAHAHAHAHHAHAAHAHAHHAAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAAHAHAHAHAHAHAHAHAHAHAHAHAHHAHAAHAHAHHAAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAAHAHAHAHAHAHAHAHAHAHAHAHAHHAHAAHAHAHHAAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAAHAHAHAHAHAHAHAHAHAHAHAHAHHAHAAHAHAHHAAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAAHAHAHAHAHAHAHAHAHAHAHAHAHHAHAAHAHAHHAAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAAHAHAHAHAHAHAHAHAHAHAHAHAHHAHAAHAHAHHAAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAAHAHAHAHAHAHAHAHAHAHAHAHAHHAHAAHAHAHHAAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAAHAHAHAHAHAHAHAHAHAHAHAHAHHAHAAHAHAHHAAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAAHAHAHAHAHAHAHAHAHAHAHAHAHHAHAAHAHAHHAAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAAHAHAHAHAHAHAHAHAHAHAHAHAHHAHAAHAHAHHAAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAAHAHAHAHAHAHAHAHAHAHAHAHAHHAHAAHAHAHHAAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAAHAHAHAHAHAHAHAHAHAHAHAHAHHAHAAHAHAHHAAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAAHAHAHAHAHAHAHAHAHAHAHAHAHHAHAAHAHAHHAAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAAHAHAHAHAHAHAHAHAHAHAHAHAHHAHAAHAHAHHAAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAAHAHAHAHAHAHAHAHAHAHAHAHAHHAHAAHAHAHHAAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAA
My fans are still quiet at tops speed
@Argo Roodla lmfao im dead 🤣🤣
IS THAT A ATTACK HELICOPTER?
@@weelewism8442 Bro mine is like a jet going at mach 2.
Thanks for showing the actual "crash" and how easy it was to reset took alot of the concern out . Just bought my first very decent computer and wanting to see what it has .
Have you had any issues after doing afterclock and have you over locked ur CPU yet
@@senorbonbon yeah I was able to go waaaaaayy higher stable than I possibly thought and still no issues
@•. Shirocho .• no MSI just shuts down . It looks scary when it happens ,but it's just going back to default .
Thanks bro, I used to get 40-50 Fps
now i dont have pc ;)
*Niec*
HAHA maybe this dont work on wooden pc like ours HAHAHA
I know Panj already said this, but it's EXTREMELY important that you let the stress test run for at least 5-7 minutes under your GPU's max clock rates. The last thing you'd want is to crash in the middle of a serious moment during a long gaming sesh, due to the fact that the GPU is being driven insane over clocks speeds that are too high for the long term.
I was about 6 minutes in to the stress test reading comments. As soon as I read yours in crashed lmao.
not just stress test. You need to actually test it on demanding games. I tried mine on assassin's creed and it crashed in game while running fine on stress testing. Might be a good help fine tuning everything.
Ohhh that's why I crash
When you just watched a video on how to turn your computer into a A-10 Warthog
The Engineer
Yeah make it super slow
The TF2 Fanboy
*TF2 theme plays*
Hmmmmmm ultimate guide 2020.
My brain: sees the date at 2 years ago 😱
3 years now actually
BlueBewyMc I can tell your fun at party’s
They change it to let people know it works still on 2020
hey did you manage to get kombuster 3 becasue i dont see a link
@@HarrisonKalin i can tell you are good at grammar
Honestly, his overclock, his outrageous core speed bump with no overvolting will get you a bsod or 2 every month
hmm the "Kombuster." sounds safe enough.
Name sounds pretty sketchy but its just a stress test software tho
@@arshhhh_ r/woosh. lol it's msi, and I know what it is. I have it. was just making a funny comment lol
Kyle B.M. holy shit dude that’s like a joke
Holllllllllly
@@kyleb.m.9193 its not a joke , its called just a sarcastic comment
Me:Oo this looks good!
My pc:*Softly*dont
FAN 100
I don't even have a fan lmao, oh wait i do have one but it there to help me cool down not the laptop
@@lord_khufu lmao xd
bro i had my pc temperature on 50 and when i putted 100 it instantly got to 43
Random guy: the engine of a space rocket is one of the loudest sounds
Graphics card’s fans on full speed: hold my beer..
thats too funny bro
my gpu doesn't actually get that loud at 100% fan speed
2018 vibes
@Argo Roodla RROOOFFF FFLLLYYSS OFFF !!!!!!!!!! (O_O)
ps4 Lemme show you how its done
fucking hell, putting fans up to 100 scared the shit out of me
Title and description: 2020
Upload date: 2017
🤔
He can change the title and description but not the actual video
It's because it's still up to date and works fine
@@icedoutshef are you serious? I don't know clearly about this issue.
@@icedoutshef whats wrong? Can you explain please? Ive just started overclocking and want to watch lots of guides and read everything
@@icedoutshef You should never touch your gpu's core voltage unless you know what you are doing
Don't refer to your last clock that wasn't artifacting as STABLE just because it survived a few seconds of Kombustor. Far longer testing needs to happen before you can determine that
You've helped me with a nice clear video so let me help you a bit - invest in a pop filter for that mic, it will remove plosives (that popping noise) every time you say a P or any letter that releases a fair bit of air from your mouth. The pop filter catches the air that is released and records nice, clear, crisp audio without those audible pops.
I don't know man. I think that he has a pop filter because I can't hear any "wind". But the "p" is very audible. I think it's due to post-processing. Just my experience.
Wind and background noise can be removed with a noise gate but plosives are really easy to spot and a pain to remove.
He probably has a sponge, which does reduce wind but doesn’t do too well with plosives. Plus you can edit that out.
Your name is litteraly longer than your comment... Good job
my potato amd a10-8700p radeon r6 10 compute cores 4c+6g
i know this is an older vid, not sure if youll read this comment. But, thanks to you, i managed to get +140 on the gpu and +650 on the mem for my 2060. i can now play squad without any freezing in high intensity firefights. thank you so much bud. subbed for saving my sanity!
over clocking starts at 4:11
Blood actually I would probably say 8:44
Thanks a lot. Heaven has a designated place for you for sure
Thanks, we can not skip the intro explaining exactly what we are doing, which programs to use, why we should and how to do it. Let's blow up our GPU!
@@ingeborgsvensson4896 yeah, I agree. he didn't make this video for you to skip it... the first 4 minutes was very important
Thanka
me only watching this video
my pc:*starts overheating*
me:chill buddy chill
What's your normal CPU temperature, mine is always at 50 to 52 but when i increase the screen display to 60 hertz it's onto 60 to 70, jesus
@@lord_khufu Thermal paste more likely. Or the stock intel cooler its just shit.
@@vyrenvygolo2429 amd core temperature is shit not fan lmao
@@marcelord8372 how you know its amd lol
Chill daddy chill
i was adding +40 on the core clock without clicking the check and i was like wow its really good and then i clicked the check and my whole monitor glitched but its all good now :D
I did the same but went up to 400 and now everything is frozen 😂
I put 1000 on that and my main monitor went pink...............(its all good tho now thank god)
Mr Dura lol I went up to 500 and I was kinda getting worried than I hit the check mark and both my monitor went blank and now it’s all good and I’m able to go up to 220 with 1995-2010 MHZ!
Same
XD
I actually got 200 core clock and 450 memory clock, i actually thought that i could only go up about like 50 or some thing but man your voice is so pleasing i tried higher values and it worked perfectly
Instructions unclear: My refrigerator turned into a 2080ti, i9 9900K gaming toaster.
what a powerful fucking refrigerator
ThiccBoiThanos toaster*
LMAO😂
that explains ur cold jokes
LMAO 🤣
When I put my fan speed to max (100%) it was so loud, I shit my self and instantly, turned it back to auto cause I thought my computer was going to blow up! 😂
Same
mine got stuck
If you don’t want the nasa pc I can take it off your hands
Teeh™ my GTX660
Me: turn fan speed to max
GTX660: (plane engine taking off sound)
Me: HOLY SHIT( turn it to the lowest possible )
It's just a fan
"You should never be getting to tempertures this high unless there is something severely wrong with your PC anyways"
Me watching my temp go to 98C: ... Oh
Is it safe using that mine went to 50 degrees
Splicer FS yeah
Rowdy just try and ventelate the case a bit and make it's surroundings more open
*temps are at 88°*
well, it's not more than 90...
Use your freezer
thanks I was getting 5 fps now overclocked i an getting 4 fps
Me: does any overclocking
*computer FPS tanks to 20 FPS*
Me: nice
@Horacio Spinelli im at 10 in kombuster
I got 20 too, I got a 1050 ti
@@MrWelshh i have a 1660 should i try to iverclock ?
@@jesuscalicea of course, i got a 1660S and I OC it and got extra avg 10 fps in games
@@MrWelshh me too brotha hahaha
im freaking out, im at +2150 mhz and im only just seeing my frames drop. i dont like this.... my house is levitating from my fans being cranked to 100%
Benchmarks actually go higher then real games could go to arround 180/900 in benchmark but only like 140/600 ingames like cyberpunk
yeah that could be very unstable within various games, benchmarks typically give some false hope form what i’ve found
Its cus its throttling. You literally get to a point where you've overclocked so much, it decreases performance
@BishBashBen tis' comedy good sir
@@RiZeLegiT Did you miss the part he said his house is levitating?
Running Kombuster sounds like my computer is gonna combust any second
😂
Have the same card dude. We actually overclocked super close to this video. Secondly I'd like to mention that you can adjust your fan/temp profile. I have my normal non-gaming fan speeds running at like 15% but then when I'm gaming my temps go above 62C and then my fan speeds ramp automatically to 70% and it goes up from there. Since I'm immersed when gaming I don't notice the high fan speeds
Using the artifact detector seemed like the best method for me. Run the stress test for about 1000-1500 frames and it lets you know as soon as you get any graphics issues. Got to +100 on the core, +925 on the VRAM without any artifacts (fullscreen 1080p). Great tutorial, even 2 years on!
I love your method! Personally got +120 on core and +200 on vram with this.
Mine just crashes and it says 0/0 artifacts
i managed to get +175 core, +975 memory.
@@akacaali Wait how do u know that it crash, If it crash will it say 0/0 artifacts?
@@akacaali That means that there are no hitches or texture problems, but you need to tone down the memory and core clock a bit, core clock by -10 and memory clock by -50.
instructions unclear, my computer turned my house into a harrier jet, and used the processing power to ascend beyond human levels of intelligince and becoming a singularity. It also materialized a girlfriend for me as a thank you for me giving him his powers
Nicolas Sousa
I- I...
@@pluv-ia y-you
@@furinick bully me :(
@@bossandrew3695 w-what?
your girlfriend is a 'HE'?? well that's unexpected.. lol
*🔧 How To Overclock Your GPU - The Ultimate Easy Guide 2019
*
Made in 2017
yeh wtf
Doesn’t change over the years it’s all the same shit
Gamer64 its all about the money and views for some youtubers
@@blumac9801 I've been watching this guy for a while, he's constantly updating his videos, making new tutorials if things change throughout the years. Overclocking is the same as it's been since 2017 so instead of making the exact same video just to type 2019 at the end of the title is wasted time and effort. So if things ever change concerning overclocking he would make a new video, trust me!
Gamer64 Meaning it still works in 2019...
My friend thought that a nuclear explosion happened somewhere when i set fan to 100%
You need an award for making such a clear video, Thank you
Every time he said "Absolutely fine" I stopped panicking
this dudes mic can make me do things i normally wouldn't
This was great. I overclocked my 3060ti from 1695mhz to 1995mhz and the memory from 7000mhz to 7300mhz. I didnt see any artifacts, I just didnt want to overclock to aggresively. I feel safe the way it is. My CPU is a 5600x overclocked from 3600 to 4500mhz.
you have to be careful, manufactures set this gap. on the memory, because, the termal pads lose their ability to disipate hot on time to time, so be careful and change your termal pad regularly, at least 6 months - 1 year depending on your pc usage. regards. jat, i burn a 1080 ti because of this.
Thank you so much, before my computer kept going at 50fps consistently now im at 70fps consistently :D
Gud
OMG I ALMOST HAD A HEART ATTACK HEARING HOW FAST IT WAS WHEN I PUT IT TO 100.
same to me though xD
Same 😂😂
lmao same
OK so I'm not doing that😂
LOL same
You know it's true if 2019 stands in the title, but it has been released in 2017, and 2020 is very happy to see us....
It's very important to use a quantifiable benchmark to test memory overclocks. gPU memory has error correction. You may reach a point where you don't have any graphical errors, but you lose performance because the memory is correcting errors.
which such benchmark do you recommend
how do I check it?
When I turn the fan speed to 100 I thought I dream that I'm soldier in helicopter
Did it work?
@@zeebloxyt7728 Well yes, but actually no
Did actually overclock worked
@@catssmacks_ nope, and I deleted it Bcuz it's useless.
Vìpəx ur u could be different so it might work for u
I didn’t know my PC could be the reason for global warming.
TURN IT OFF!!!! You are killing all of the penguins and polar bears😂
I didn't know my Body heat was contributing to global warming XD
Technically it is
@@nep6533 yep
@@nep6533 Get outa here you technical freak LOL
"We don't need rivatuner" thats all i got msi afterburner for
with rivatuner many of the sensor of computor can be read and shows gpu total power n cpu total power in each category in HWinfo
Everyone: Il just try putting my fan to 100%
Pc: Fan Go Brrr
Man, I don't understand how you only have 294k Subs, you should have millions. Your literally the best PC helper on youtube, keep it up.
When I changed my fan speed to 100% it scared the shit out of me I thought my pc is going to explode :DDD
When you overclock your prebuilt AMD Rx 460 and it turns into a Red Bull Helicopter
LMAO
Underrated comment ngl.
LOOOL
>prebuilt
Programed you play Fortnite you do not have an opinion in anything
Just started the test on my gtx 650, getting 1 frame per year, feeling good.
Straightforward and easy to follow step by step, a very refreshing change of pace when it comes to learning overclocking. Great video my man!
"Whats that burning smell"
Your pc
Mine was smoking when I tried this. Never again
@@benos4x4adventures49 it is a joke lol
tell my y i started to sniff my pc
So, the moment I read this, I smell something burning... And my mom too, I don't know if was my computer but I uninstalled the program just for sure
Thx bro you help me a lot!
Here is my results when playing "fortnite"
*Before overclock*: 60 fps - with a lots of drop frame
*after overclock*: 120 fps - *no* lag - and *no* frame drop!
Thx bro!!
Really cause i also want to overclock rn
how the hell did it do that
@@maxamphetamines it actually gets really good my gtx650 usually gives me 120-140fps in csgo ill overclocled it a lil just the fps went 160-220 and the max temp after 3 hours was 71°c soo its really good if you overclock correctly
Why did i get 20 likes? I just say that its work
@@sospirit27 yes really
I dont leave comments ever, but this was so good hard not to say how grateful i am for it. Appreciate it brother.
I turned my fan speed up to 100% and now my house is like the one in the movie ‘UP’. Paradise falls here we come boyysssssss
Haha my house became an airplane now
No, you don't wanna go to Venezuela.
Great video for new overclockers but I disagree on one thing; do not apply 'start on windows boot', if you overclock to high your booting will be stuck in a cycle of crashing and it's annoying to revert it. Other then that, great video
They made it to where if you fuck it up that hard it just resets it back to default
"Now you might not even be able to get an additional 120 MHZ"
Me sitting with it at +300 MHZ: O_O
I was just wondering that, I hit 120+ no prob, gonna try for more. Maybe its cause the video is a few years old all our cards are better?
@@DuoXCity I realized a bit later that none of my games would even startup on that high of settings, even though the stress test would ???? I have it at 160 right now, but the memory speed is definitely not as high as he said it can be. It's around 120 currently
Daxiel1992 damn these comments are early for a vid like this 😳
@@jontbh_ 😳
Same problem here
this man has turned my pc from a honda civic to a F15 Fighter Jet
overclocks pc at 6:00 am and pc sounding like a military jet, me with noice cancellation headphones playing witcher 3 at full graphics with a radeon r9 360 with a smirk on my face getting 200 frames......seems ok
BHAHAHA
HAHAHA
My 2070 super shits on that
Hahahaha best comment😂😂😂😂😂😂🤜🏿💯
theduckwars army this made me lol
I will turn my fan speed to 100% and when my parents ask me what's that noise, i will tell them that the laptop has become old and the temperature is constantly increasing, maybe we should sell this one and get a better stable computer. HEHE BOII.
😂😂😂😂😂😂
Smart
did you get a new computer?
@@orange-dm8fx no he died
do you got new pc
I watched many other tutorials before this one, and none of them were as detailed and well-explained as this one. Thank you, good sir! Liked the video, and hats off to you.
Dustin Hoffman de Romania! Nota 10 cu felicitari pentru caracterizarea unui PURIC!
How did mine not have graphics issues at 1000
Edit:well it didnt I just didnt click enter
AmEeR wait what mines at 1100 for the memory and its literally fine im so confused rn
HHazurd yooo mine too wtf
i have a gtx 970 and my core clock was up to +1000, saw no difference in fps or temparature whatsoever
well my gpu got to 200 and it was 100 degrees so i didn't go higher
Exa Bast once memory reaches a certain point, performance decreases. Also, temperature is measured on gpu not the memory.
Bro you helped me so much, I was getting unconsistent frames between 80-144 and even when I capped them at 80 my game didn't feel smooth (probably frame times issue) and after OC with your help I'm getting 120-144fps with no stutters, game is just smooth as butter. Love you
Czesc a jakiej karty uzywasz tez gtx 1070ti ?
@@omega77uk 1080
which game and GPU?
"smooth like butter like criminal under cover"
-Once BTS said...
What did you cap the fps with? Ingame fps caps have horrible frametimes. Its better to use nvidia control panel or RTSS to limit fps
shoutout to tonybuttface for logging in into steam at the exact right moment hahaha :D
Great vid! Overclocked core to +240 and memory to +1000
I'm Seeing all the top comments now and wondering if it worked or if it kills your PC
same
Overclocking wont kill your pc. It seems scary but it's all safe. As long as you overclock the right way, you are good.
@@m3m._-440 i never tried it but i think the same thing. When it is done Well you are fine and this Guy tell you the right way To do it, just dont skip the steps
dont go yeet with the max shit go slow and safe like this guy says
@@m3m._-440 hey i got a question so i have a pc that runs fortnite on 40-60 fps its really bad so if i overclock it will boost my fps?
to everyone who got worried when they’re computer froze. Don’t worry don’t touch anything your computer will turn back on fine and you can turn it back down!
Wait do I turn off my pc?
@@kuztumsleepy7789 no
Jury Tarded did you fix
KuzTum Sleepy I turned off my laptop and that was mistake
@@oleglog6927 same I got a Windows update
My firealarm just went off :D
You made it easy by cutting out the clutter other people tell you all the stuff you don't really need to know and it leads to confusion. Thanks for the guide