3 things to say......1) that's a whole lot of bolts, screws and clips. 2) that's one dirty engine bay. 3) that is one hell of a good looking headlight.
I have alpharex nova headlights for my ranger and even on how impressive the morimoto headlights are I like how the alpharex headlights look! Awesome video as usual guys! If you guys want me to bring my ranger in to showcase something let me know!
Before buying a new Ranger I had a brand new 2018 F150 that I immediately bought Morimoto XB headlights, fog lights and tail lights for. You do wind up tearing down the entire front end of the truck but it's all easy lifting and the step by step instructions either on youtube made it so simple. Sure I was nervous at first tearing down a truck I had for about a week but 100% worth it. I said after seeing them on my f150 I wouldn't hesitate to do them again because they look so good so that's where I am at. The light output is ridiculously good.
So my 2022 Ranger came in finally and it was built wrong without the LED's so I really like these and am willing to purchase them but I have a problem. How do you turn off the DRL? Without it being controlled with the menu when I am at a drive in or need them off with power inside how is this done now? I would hate this to be a deal breaker but I need control of them. Thanks great video and BS for Ford making this many steps..
One item that was not addressed in this video is the DRL of the XL and XLT Halogen headlamps - those use the low beam bulbs as DRL instead of the Lariat dedicated DRL LED. Would this Morimoto headlamp activate the low beams when it receives the DRL signal from the truck, or would it leave the low beams off and activate the new DRL instead?
The low beam on the Morimoto headlight would come on, UNLESS, you disable the factory DRL function using the truck's infotainment menu. Also, the Morimoto headlights DRL bar, is powered independently, via the fuse tap. so it's not dependent on the DRL signal from the truck, just power from the fuse box.
Just finished the install took about 4 hours. I’m pretty slow but thanks so much for the video very thorough. Thanks for being pretty much the only guys out there making videos on these PITA vehicles 👍🏽🫶🏼
These look awesome, im not happy with the halogen lights so I look forward to purchasing these definitely not looking for to installing them thou that's alot of work just install headlamps, I've done jeeps in the past and it's like a ten min job lol. Cheers
What differences are there between the 2015-2018 models and 2019+ models that make these incompatible with the older trucks? They appear to be pretty much the same shape and dimensions 🤔
The difference is 2015-2018 is a foreign market vehicle for the USA, technically we didn't have Ford Rangers from 2013-2018. They were brought back into the USA for the 2019+ options.
@@drivenhaley4428 Yup, I'm aware. It gets confusing for us foreigners when a lot of the information online says 19 and up since we don't know if it's because of an actual difference that makes the part incompatible, or just because the people who wrote it are in the states 😕
Let me know where you are located... dude I will pay you to do install them on my Ranger. I love them, but that just looks like a lot of stuff to remove for a head light!
We're located in Atlanta, and we have a ton of authorized dealers and shops in the US that can help with installation. Shoot us an email and let us know where you're located! sales@headlightrevolution.com
Ok guys we are almost there, just four tx30 bolts, 18 tx25s, 47 10mm bolts, 7 clips, some Velcro, little bit of glue, and lastly some zip ties made of adamantium .
@@HeadlightRevolution i had em done professionally it took them over 5 hours but this was their first ramger…usually they did f150s….admittedly now im. Oncerned about atheir work
@@drivenhaley4428 just standard upgrade led bulb will out perform this new headlight, so we really just getting a new design. At least the new headlight unit better than stock. I will stick to my $50 led bulb. And maybe get these headlight units if they go down in price. TY.
That is not necessarily true if you think about it. Putting an LED replacement into an OEM headlight can be brighter, in this case, 217% brighter... but it can also be lacking vital things needed for good lighting. When you put the LED replacement into a stock housing, you're going to have more glare regardless. You also aren't going to get such an intense beam pattern that a dedicated projector would give you. If anyone were to ask what I prefer, the brighter LED or the dedicated projector housing I would go with projector any day. The XB LEDs use dedicated LED projectors which not only give you a bight output but also have a CLEAR cut-off line and step-up beam pattern. Not to mention, the XB LED headlights will have a wider beam pattern than the OEM or LED replacement would. There are many benefits to upgrade to the XB LED full headlight unit.
@@drivenhaley4428 100% agree - My XLT will be getting these. I didn't get the Lariat due to a few reasons in build and options, and the stock Halogens definitely need to be swapped, but not with the standard reflectors. The LED projectors are the safer and probably more durable (most LED drop-ins cant' fit the dust caps) option for me.
@@glem9582 Sorry for the slow reply, YT doesn't notify us once the original comment has been responded to. I'm sweeping through older videos in efforts to find comments just like yours! We notched the fuse box to fit the wire!
3 things to say......1) that's a whole lot of bolts, screws and clips. 2) that's one dirty engine bay. 3) that is one hell of a good looking headlight.
Haha, yes we were even surprised on just how many steps were involved with taking off this front bumper. Thanks for the funny comment!
Really excellent step by step on mounting these. Most thorough tutorial I have seen. Thanks.
Alrighty guys so now that we've disassembled the entire truck we're almost ready to swap out a headlight, just a few more bolts.
LOL basically!
All that to swap my headlights! L ford I just my alpha Rex luxx will be here Thursday 😂
I have alpharex nova headlights for my ranger and even on how impressive the morimoto headlights are I like how the alpharex headlights look! Awesome video as usual guys! If you guys want me to bring my ranger in to showcase something let me know!
Thanks for sharing!
Wiring seems simple enough but maaaaan all that to remove a headlight👁👁
Ford made it real fun huh 🤣
Before buying a new Ranger I had a brand new 2018 F150 that I immediately bought Morimoto XB headlights, fog lights and tail lights for. You do wind up tearing down the entire front end of the truck but it's all easy lifting and the step by step instructions either on youtube made it so simple. Sure I was nervous at first tearing down a truck I had for about a week but 100% worth it. I said after seeing them on my f150 I wouldn't hesitate to do them again because they look so good so that's where I am at. The light output is ridiculously good.
So my 2022 Ranger came in finally and it was built wrong without the LED's so I really like these and am willing to purchase them but I have a problem. How do you turn off the DRL? Without it being controlled with the menu when I am at a drive in or need them off with power inside how is this done now? I would hate this to be a deal breaker but I need control of them. Thanks great video and BS for Ford making this many steps..
You would have to wire up a custom switch, these tap into a fuse that gets power with ignition normally.
One item that was not addressed in this video is the DRL of the XL and XLT Halogen headlamps - those use the low beam bulbs as DRL instead of the Lariat dedicated DRL LED. Would this Morimoto headlamp activate the low beams when it receives the DRL signal from the truck, or would it leave the low beams off and activate the new DRL instead?
The low beam on the Morimoto headlight would come on, UNLESS, you disable the factory DRL function using the truck's infotainment menu. Also, the Morimoto headlights DRL bar, is powered independently, via the fuse tap. so it's not dependent on the DRL signal from the truck, just power from the fuse box.
@@HeadlightRevolution Thanks! Good to know that the dash option will work!
This fuse Box, number 19, Will turn on The drl when unlock the doors and the alarm?
Or The drl only Will activate when turn the key?
Just finished the install took about 4 hours. I’m pretty slow but thanks so much for the video very thorough. Thanks for being pretty much the only guys out there making videos on these PITA vehicles 👍🏽🫶🏼
Glad it helped!
These look awesome, im not happy with the halogen lights so I look forward to purchasing these definitely not looking for to installing them thou that's alot of work just install headlamps, I've done jeeps in the past and it's like a ten min job lol. Cheers
Newer vehicles SUCK for installs 😭
Hello, is the plug and play system the same as for the European versions? I am in France and before ordering them, I ask myself this question.
THANKS!
Please reach out to customer support and send over a picture of the plug on your vehicle so we can look into this for you!
Who makes the led? Cree? Philips?
Lifespan of the run time of led?
They are made by Osram.
Hello, are there similar read tail light assemblies with the cool type directional or what tail light upgrade do you suggest? Thanks in advance
When dude said he had a prying tool I busted out laughing because at first I thought he went hood with a butter knife 🤣🤣🤣🤣
😂😂😂
What differences are there between the 2015-2018 models and 2019+ models that make these incompatible with the older trucks? They appear to be pretty much the same shape and dimensions 🤔
The difference is 2015-2018 is a foreign market vehicle for the USA, technically we didn't have Ford Rangers from 2013-2018. They were brought back into the USA for the 2019+ options.
@@drivenhaley4428 Yup, I'm aware. It gets confusing for us foreigners when a lot of the information online says 19 and up since we don't know if it's because of an actual difference that makes the part incompatible, or just because the people who wrote it are in the states 😕
Haley coming in clutch again!
I bet if you put the GTR lighting in the factory halogens or led, they would be way brighter than the morimoto full assemblies
More intense in the center maybe but the spread of light from the full assemblies is unmatched!
Let me know where you are located... dude I will pay you to do install them on my Ranger. I love them, but that just looks like a lot of stuff to remove for a head light!
We're located in Atlanta, and we have a ton of authorized dealers and shops in the US that can help with installation. Shoot us an email and let us know where you're located! sales@headlightrevolution.com
Ok guys we are almost there, just four tx30 bolts, 18 tx25s, 47 10mm bolts, 7 clips, some Velcro, little bit of glue, and lastly some zip ties made of adamantium .
😉😉😉
@@HeadlightRevolution lol
Can you try out the “Diamond vision F6”, the Novsight lights and also the Phillips ultinon? As high end lights that compete with GTR
We could possibly test these at some point!
Awesome video! Can you comment on who’s ranger that is? Are they in Instagram? Cheers
I wish there was a morimoto housing for my my 2000 ford f150 xl :(
Maybe one day!
How much are those LEDs? Do they VIOD warranty?
i dont think i've worked on a vehicle with headlights that are as much of a pita to remove as this
That fuse you took out was the power steering assist in my truck… The lighting control fuse is blocked by the big black square fuse. What should I do?
I have the same question!
What about JB Predator tri headlights?
Never heard of them!
Will it work on the Word Ranger Raptor?
We don't have one to test in the US market.
How long does this install take?
Depends on how familiar you are with removing a bumper! Likely about an hour.
@@HeadlightRevolution i had em done professionally it took them over 5 hours but this was their first ramger…usually they did f150s….admittedly now im. Oncerned about atheir work
Will it be available for right hand drive cars?
No plans as of yet,
Do you guys have these headlights for the RHD market ?
Not at this time, sorry!
holy shit that's a ton of steps to install.
Thanks Dodge 😅
Holy crap. Hours of work just to replace a headlight assembly.
Worth it if you want the best headlights out there for your truck!
how many hours?
If I have stock halogen can I upgrade to morimoto led?
Yep! Plug and play!
Can this head light work on the 20 17 to 2018 models
No, this is a 19+ headlight.
What about Stock halogen with your HR LED bulb?
We did testing for this a long time ago! Here is the video if you missed it: ua-cam.com/video/2ENa-Amlhx0/v-deo.html
@@drivenhaley4428 just standard upgrade led bulb will out perform this new headlight, so we really just getting a new design. At least the new headlight unit better than stock. I will stick to my $50 led bulb. And maybe get these headlight units if they go down in price. TY.
That is not necessarily true if you think about it.
Putting an LED replacement into an OEM headlight can be brighter, in this case, 217% brighter... but it can also be lacking vital things needed for good lighting. When you put the LED replacement into a stock housing, you're going to have more glare regardless. You also aren't going to get such an intense beam pattern that a dedicated projector would give you. If anyone were to ask what I prefer, the brighter LED or the dedicated projector housing I would go with projector any day. The XB LEDs use dedicated LED projectors which not only give you a bight output but also have a CLEAR cut-off line and step-up beam pattern. Not to mention, the XB LED headlights will have a wider beam pattern than the OEM or LED replacement would. There are many benefits to upgrade to the XB LED full headlight unit.
@@drivenhaley4428 100% agree - My XLT will be getting these. I didn't get the Lariat due to a few reasons in build and options, and the stock Halogens definitely need to be swapped, but not with the standard reflectors. The LED projectors are the safer and probably more durable (most LED drop-ins cant' fit the dust caps) option for me.
Haley got this exactly right!
how to wire the DRL? since the stock doesn't have DRL
Did you watch the *entire* video?
We have it labeled in the time stamps, check the description.
@@HeadlightRevolution fuse box is tightly sealed. what did you do to the wire to go out the fuse box
@@glem9582 Sorry for the slow reply, YT doesn't notify us once the original comment has been responded to. I'm sweeping through older videos in efforts to find comments just like yours!
We notched the fuse box to fit the wire!
How much is it?
You can find them here: www.headlightrevolution.com/morimoto-19-ford-ranger-xb-led-headlights?quantity=1
Thanks Haley!
Very cool, but $1300+!
Cheaper that the factory LED headlights by far, better warranty also.
@@HeadlightRevolution really?
@@gsdfan8455 Yep!
Jesus...seems like a ton of work just to replace the headlight assembly...
It is, sadly.
Well, I guess this is why I have credit cards.
😂
can someone help me i have a 05 Acura tsx it has d2s bulbs but want 2 change the to led is there any adaptor i can use to change them
Too be honest its best to stick with HID's. It takes a lot of work to convert it over to LED.
I gave up on this install when he started removing the back seats….
😂😂
😂😂
So with the XLT, and DRL disabled from the settings menu inside. The DRL will still come on during the day, but the low beams will not? Correct?
Correct