4Runner Morimoto XB EVO Headlights Install Guide
Вставка
- Опубліковано 12 вер 2024
- BUY THE ALL NEW MORIMOTO XB EVO HEADLIGHTS ⬇️
www.4runnerlif...
MORIMOTO XB EVO FEATURES VIDEO ⬇️
• NEW Morimoto XB EVO He...
In this video we show you how to install the all new Morimoto EVO Headlights for Toyota 4Runner. We also have a full feature video where we go over all the new features available on these headlights which is linked above.
#4Runner #toyota #toyota4Runner #4runnerlifestyle #overland #overlanding #offroad #toyotausa #trucksofinstagram #trd #trdpro #yota #Morimoto #morimotoevo
Wish you did a side by side comparison of output with normal vs supercharged. Look sweet
Straight to the top of my wishlist.
Definitely a top of list upgrade 🤤
It seems like the drivers can't be swapped out without removing the whole headlight, which feels like a big design flaw. Hopefully some day somebody will make an extender for those wiring harnesses so that you can mount the driver in a place where you can remove it if you need to. If I end up replacing my XBs with these, I'd like to run the standard drivers on the road and swap in the supercharged driver when I'm off road. Any idea if there's a workaround for this planned?
Easy to do , just follow these 100 steps
Followed your instructions and my high beams don’t work. Any idea what I did wrong?
If you have the full LED HI and LOW beam 4Runner, you have to leave one of the plugs capped and unplugged. If you connected it, chances are you blew the high beam 20a fuse. Check your harness connections and replace the fuse. This happened to me.
Where is the link? You have an arrow without any link to the featured video
It was just private but visible now!
ua-cam.com/video/T_UObMRI6vc/v-deo.html
It says free fog lights with order on the site, what fogs are being included?
So I already have something in my IMJ fuse slot. Which is for the raptor lights. Does that mean I have to remove my raptor grill lights in order to use this headlight?
That's alright! you can also use a lot of other positions like the headlight positions! for left or right!
No need to remove, now we actually don't believe its always necessary to install this part? don't quote us but we added it here in the video just in case 🤙
Ohh nice, your the dudes blinding fellow driver with your 30% more illumination
it won't blind oncoming driver with low beam. Boosted low beam still comply within LB2V no problem. Left glare region still will have min 41%, right 1.5U region reserve min 9% allowance to limit. VOR aim stock height, lamp height between stock to 44", 0.38° aim down =2" down at25' Anything above 0.57° down=3" down at 25'
So if I have my factory headlights on still, that means I don’t have to take off my entire bumper to put these on
I ordered a bunch of stuff from Morimoto and would not if I had to do it all over again. The people are very rude there. They don’t answer phones emails or return messages.
You can't do the add a fuse to the '21
You can , you just need to get a fuse box lid riser
I’m curious if cops are gonna notice a 30% increase and pull you over. How are they gonna know?
🤫
Do you actually want to blind other drivers?
Yes, we’re gonna know. May not get a ticket but be prepared to get pulled over. Other than that, a nice looking headlight. Just opt out of the 30% booster.