I always pull exciter from the rotor and wind the coils on a machine then put them in. It’s more of a connection but easier than hand winding. When I am done I VPI it.
Hi. I’m usually pulling exciter stator fir rewind but this one our generator technician doesn’t wanna pull stator out so I decided to rewind it in place not bad took me 2 hrs. To rewind that little one.
Thats one messy job bro, but you nailed it, did you put epoxy on it , i have a doubt with RRA, did you just connected jumpers to the negatives and positives.
@@windertrucker6230 haha its just the diode man, rotating rectifier assembly, rra,,,they rectify the ac voltage from excitor rotor to dc which goes to the field poles while rotating so its RRA, just fancy but its diode, how many diodes where there, six?
@@harishharikumar1543 lol it’s funny bud i asked my boss who is in charge of genset and welder repair he told me I’m more than 40 years fixing generators I haven’t hear that RRA he advice me to asked you lol.Yap got 6 diodes on it. Bud.
@@windertrucker6230 may be its just two different terms of same thing, lets call them diodes simply. 3 negatives and 3 positives, so we put hook it in pairs to the three leads of excitor. I really want to work on DG sets man, but my experience with them is almost zero, there is no one to call for help if something goes bad, its very lucrative than motors.
Yes doesn’t mater that is the original winding 2 phase going to the right and 1 phase going to the left.I don’t want to change the winding on the same direction of connection so that I don’t have problem.👍 or 2 phase going to left and 1 phase going to right doesn’t matter
سلام سپاس تشکر وهزاران هزار 👍..👍. استاد مهندس بزرگوار لطف کنین ارمیچر وبالشتک موتورهای الکتریکی را هم بهمین صورت واضح ودقیق و بسیار عالی سیم پیچی نمایید ..ما منتظر اموزش های بی نظیرتون هستیم ممنون و تندست و شاد باشین
@@windertrucker6230 ok bro salamat,,,Meron kc akong i-rerewind katulad nyan,,,dito pa rin ako sa BELGIUM,,, ingat bro,,,,GOD BLESS,,, panonoorin ko pa yung iba mong videos,
जो भाई साहब रिवाइंडिंग कर रहे हैं इनोवा आउटर में दे रहे हैं किसी भाई को चुटिया बना रहे हैं या कम कर रहे हैं किसी भाई को युटुब से मदद ले रहा है तो उसको बर्बाद करें क्या
I always pull exciter from the rotor and wind the coils on a machine then put them in. It’s more of a connection but easier than hand winding. When I am done I VPI it.
Hi. I’m usually pulling exciter stator fir rewind but this one our generator technician doesn’t wanna pull stator out so I decided to rewind it in place not bad took me 2 hrs. To rewind that little one.
@@windertrucker6230 good time!
Sidewinder, I've got a bad stator off of a brushless generator that I recently acquired. Would you be interested in the job?
Ranjan sahni
Ranjan sahni
Precise repair, congratulations 😀.
Thank you.
@@windertrucker6230 Thank you for the like 😀.
Hello sir i have opened an exciter but its winding is done in same direction not reverse forward what should i do
CAN YOU MAKE A SMALL DIAGRAM ABOUT THE WINDINGS AND CONNECTIONS?
*Good job my friend 👏*
Thank you my friend 👍
Thats one messy job bro, but you nailed it, did you put epoxy on it , i have a doubt with RRA, did you just connected jumpers to the negatives and positives.
Hey bud just connected to the diode ,what’s RRA man I’m one of the poor guy on abbreviation lol
@@windertrucker6230 haha its just the diode man, rotating rectifier assembly, rra,,,they rectify the ac voltage from excitor rotor to dc which goes to the field poles while rotating so its RRA, just fancy but its diode, how many diodes where there, six?
@@harishharikumar1543 lol it’s funny bud i asked my boss who is in charge of genset and welder repair he told me I’m more than 40 years fixing generators I haven’t hear that RRA he advice me to asked you lol.Yap got 6 diodes on it. Bud.
@@windertrucker6230 may be its just two different terms of same thing, lets call them diodes simply. 3 negatives and 3 positives, so we put hook it in pairs to the three leads of excitor. I really want to work on DG sets man, but my experience with them is almost zero, there is no one to call for help if something goes bad, its very lucrative than motors.
Sir in ranar moter 24 salot ke bare me bhi batana
I have quation ..
Why the exciter rotor is three phase and not single phase ?
It's use for 3phase generator
Thank you Sir.
hello sir nice to meet you
अच्छा से भी अच्छा है आपका वीडियो
Thank You my friend 🙏
Ayun oh👍🙂bc yta lage sir🙏
Busy dami trabaho Jackly.Kumusta.?
@@windertrucker6230 ok lng sir😊ingat po kayo lage godbless 🙏
@@jacklyresulta7437 Salamat ingat din and God Bless.❤️
سلام استاد ..جهت پیچشش کلاف ها از سمت راست بچپ ویا بلعس فرقی نداره ..ممنون میشم حتما پاسخ بدین
ردیف اول کلاف ها را بچپ سیم پیچی کردین ..ردیف دوم را بسمت راست. ...
Yes doesn’t mater that is the original winding 2 phase going to the right and 1 phase going to the left.I don’t want to change the winding on the same direction of connection so that I don’t have problem.👍 or 2 phase going to left and 1 phase going to right doesn’t matter
Sir single phase alternator exciter rotor winding please upload video
Sir please tell me which separator use in coil upper side
It’s a fibre wedge
Thank you sir
Sir how to buy fibre wedge
@@rohitmajumder1144 it’s already form in different sizes try online if there’s no supplier in your place
@@rohitmajumder1144 you’re welcome 👍
سلام سپاس تشکر وهزاران هزار 👍..👍. استاد مهندس بزرگوار لطف کنین ارمیچر وبالشتک موتورهای الکتریکی را هم بهمین صورت واضح ودقیق و بسیار عالی سیم پیچی نمایید ..ما منتظر اموزش های بی نظیرتون هستیم ممنون و تندست و شاد باشین
واستاتورها
Good jobs
thank you...
Nice one 😊
Thank you
Any idea jobs requirement
Thank you
Ayos sir.... 👍👍👍
Salamat Jonathan.Kumusta kna?
@@windertrucker6230 ok naman sir... Maend contract na ako December
@@njmtafalla3738 dna ma renew contract mo makabalik ka jan.
@@windertrucker6230 apply ako iba sir
@@njmtafalla3738 ah ok kung jag hire sana sa kabilang shop pwede kna sana wala pa din.
amazing skill,,
Thanks 🙏
Tanto tiempo pérdido y no lo instala 🤔🤔🤔🤔👌
How many watts?
Don't remember sorry,around 80 kw?
That’s great bro❤️❤️❤️❤️
Thank you my Friend.You as well.
kumusta dyan sa Canada bro?common connection yan bro? consequent? or may parallel at series din sa rotor exciter?😊😊😊
Wala pa ako narewind na parallel consequent karamihan
@@windertrucker6230 ok bro salamat,,,Meron kc akong i-rerewind katulad nyan,,,dito pa rin ako sa BELGIUM,,, ingat bro,,,,GOD BLESS,,, panonoorin ko pa yung iba mong videos,
@@jovesantos2211 👍
Pls share the schematic, mister, for the coil and the connection, sir, thank you🙏
Go to winder life Facebook group I’ll post the diagram
X.saeter.rotar.and.man.rotar.kase.chk.kea jay
Very good
Thank you bro 👍
Sir connection please
Please watch for connections.good day👍
Is a armature of generator
Hi.Its arm. Of generator but I’m rewinding only the exciter rotor and field.
Sir apload winding diagram futcher video good job
Thanks bro next time i will.
Boss Hindi ba forward and reverse Ang mga coils nyan? Paki sagot Po baka nagkamali Ako Yung ginagawa ko dito
Yap forward Reverse
Every single coil Po ba or every group of coils .na duling Po Kasi Ako sa pag kuha Ng data Kasi Po sunog na sunog at makapal Ang varnish😀
Every single coil Po ba or every group of coils .na duling Po Kasi Ako sa pag kuha Ng data Kasi Po sunog na sunog at makapal Ang varnish😀
3 phase Po Kasi ito na rotating exciter sa bawat group of coil 5 coil series.
Salamat Po Ng marami sa sagot
রোটার কয়েল গরম হওয়ার কারণ কি সমাধান দেন।
Diodes AVR and when bearing and housing failed will rubs to exciter stator,those are some of the problem by overheating 👍
Thanks sir...
You’re welcome.Thank you👍
बहुत अच्छा
Thank you 🙏
❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
24salat kanesan❤❤❤
Feed ch oil connection
Good
Thanks bro🙏
👍👍👍
Thanks 👍
😍🤩🤩🤩🤩🤩😍😍😍😍😍
Thank You 🙏
❌️Motor winding ✅️exciter winding
Sir u Hindi language understand
Kanec ting diegram
WT👌👌👌👌👌🙏🙏🙏🙏🙏🌹🌹🌹🌹🌹
यह जो रिवाइंडिंग कर रहे हैं इनर और आउटर कहां लग रहा है इसको ध्यानसे देखो इसके चक्कर में क्यों बर्बाद मत होना
जो भाई साहब रिवाइंडिंग कर रहे हैं इनोवा आउटर में दे रहे हैं किसी भाई को चुटिया बना रहे हैं या कम कर रहे हैं किसी भाई को युटुब से मदद ले रहा है तो उसको बर्बाद करें क्या
Hey by by
Hi master cardines
Goon evening
Hi. Good evening,How are you?
@@windertrucker6230
Thank you
I'm going to work
Here is raining and so good weather
@@windertrucker6230
Thank you
I'm going to work
Here is raining and so good weather
@@windertrucker6230 how are you bro??
I'm going to rewind a 2speed motor today
@@doran1920 good weather same here bro snowing 2 days.
What’s the hp of motor you rewind.Good luck bro work safe.👍
U
Hello sir i have opened an exciter but its winding is done in same direction not reverse forward what should i do
Good
Thanks
Kanec ting diegram