Thank you Brian, this is very helpful. Can you not DMX the Pars and control then with the remote individually? Put one on each corner of the room and control them with the remote?
Thanks for the video. I had to crack open the book because I could not find the SLAV option on the menu. My light menu shows SEcd instead of SLAV. Still the same concert; one Master with multiple SEcd (slaves). Sharing, in case someone else had the same issue
I successfully did this with a mixed set of PAR / BAR Lights. However it seemed to me that it made a difference, in what order I turned them on (being completely wired from the beginning on).
I bought a a pack of Adj Mega Hex par from g4music. One worked for approximately 2 hours before it stopped working. Used it as uplighting and the guest warent at the erea the lamp was in. I have tried using different cabels and power outlets. And see if the power cord wasn't plugged in good enough. Still no light output or light on the display. Possible to reset the lamp or something? One lamp i got got was delivered broken because of gear4 music didn't use much sockhproof materials around the boxes that was inside a way bigger box..... I have contacted them and hope they will become better at packing. Thinking of them that buy super expensive music instruments 🙄
I probably need a DMX controller. I would love to be able to press a button and have them fade between blue and white instead of all colors. Press another button and put them in sound active. Then another button and have them hot pink or something. Is the only answer to buy a DMX controller? Thanks!
your info and reviews are very helpful, thank you. Do you know of any way to add different colors to the bonus buttons on the remote? It seems like there's 3 different whites & it would be great to add another shade of purple, pink or whatever.
Something may have changed with the newer version of these lights like the word slave on the display is now SEcd. When setting up for a remote control you can’t leave the display on d001 anymore, not all functions will work. You need to follow all these instructions until it says leave units on d0001, don’t do this, leave the master on ir and the other lights on SEcd. Took me 3 days to figure this out and ADJ support didn’t even find the answer.
One question boss. So if I hit the sound active button or the strobe button, it will go into strobe yes how do I get out of strobe or sound active do I just push the button again is it that simple. I am looking forward to buying one of these I know it's such a stupid question. Thank you great video by the way
Par pak hex runs on a different remote than the original? My Hex 5 uses the dot par. My hex 3 uses RFC. I was a little upset when I discovered they needed different controller's... So that's 3 different controllers for essentially the same light
When daisy chaining like this Brian at what point would you suggest using a DMX terminator? Is there a suggested length or amount of lights or is it best always using one? Many thanks. great videos as always.
Hi, I have the Tripar Profile Plus, I bought the ADJ RGBW4C. It doen't seem to work well with this, is it compatible? If so, can you do a video setting this up correctly. Also, for the Tripar Profile Plus do I do the same as on this video, but set the channel to ch04, not ch06?
Please do a tutorial for the mega flat tri pak plus model. They have totally different master/slave settings and I have not seen 1 UA-cam video on that particular model.
if i set my second par IR OF you press 2 times on MODE and you see SLAV, i don't get this SLAV and they don't go in master slave modus. i got 4 pars that i want to connect. can somebody help me what to do ?
THANKS A MILLION!!!! I have honestly NEVER gotten this right. you are always such a great help. Love your straight forward videos. God bless you
Can you pair them up without using cables ans go wireless ? Or do i need the HEXCON DMX controller to do that ?
Thank you Brian, this is very helpful. Can you not DMX the Pars and control then with the remote individually? Put one on each corner of the room and control them with the remote?
Whats your opinion on the color control? can you customize the colors? over all power of lights for stage use?
Thanks for the video. Is there an app to use to turn MEGA HEX PAR on and off?
You sir need to write the manual for this company. I’ve never been able to figure out that damn remote. Thank you!
Thanks for the video. I had to crack open the book because I could not find the SLAV option on the menu. My light menu shows SEcd instead of SLAV. Still the same concert; one Master with multiple SEcd (slaves). Sharing, in case someone else had the same issue
The newer versions hav Secd formally Slav
Thanks for the helpful video. Do you know if this works with the ADJ VPAR PAK?
I just bought these same light but mine have a LED controller instead of a remote. Do you have a video using the controller? Thank you
I successfully did this with a mixed set of PAR / BAR Lights. However it seemed to me that it made a difference, in what order I turned them on (being completely wired from the beginning on).
When they are in this mode, does every fixture have to always do the exact same thing? Even when you are running through the built in shows? Thanks.
I bought a a pack of Adj Mega Hex par from g4music. One worked for approximately 2 hours before it stopped working. Used it as uplighting and the guest warent at the erea the lamp was in. I have tried using different cabels and power outlets. And see if the power cord wasn't plugged in good enough. Still no light output or light on the display. Possible to reset the lamp or something? One lamp i got got was delivered broken because of gear4 music didn't use much sockhproof materials around the boxes that was inside a way bigger box..... I have contacted them and hope they will become better at packing. Thinking of them that buy super expensive music instruments 🙄
Sorry bad English btw 😆
I have been having issue with my lights I can’t find the slave mode on it. This was a very helpful video, but I’m lost and would to have your help.
These lights auto save the settings themselves after turning them off and on again? Don't have to redo master/slave every time?
Straight to the point. Thanks a million.
I probably need a DMX controller.
I would love to be able to press a button and have them fade between blue and white instead of all colors. Press another button and put them in sound active. Then another button and have them hot pink or something.
Is the only answer to buy a DMX controller?
Thanks!
Would the DMX Chanel and slave would be the same if you’re running only two of those lights?
your info and reviews are very helpful, thank you. Do you know of any way to add different colors to the bonus buttons on the remote? It seems like there's 3 different whites & it would be great to add another shade of purple, pink or whatever.
I agree! please help
Something may have changed with the newer version of these lights like the word slave on the display is now SEcd. When setting up for a remote control you can’t leave the display on d001 anymore, not all functions will work. You need to follow all these instructions until it says leave units on d0001, don’t do this, leave the master on ir and the other lights on SEcd. Took me 3 days to figure this out and ADJ support didn’t even find the answer.
One question boss. So if I hit the sound active button or the strobe button, it will go into strobe yes how do I get out of strobe or sound active do I just push the button again is it that simple. I am looking forward to buying one of these I know it's such a stupid question. Thank you great video by the way
Hi, actually i got the mega tripar. Do they set up the exact same way?
Do i need the remote or can i choose sound active on my master and let it go all night?
Hi.. so once set up this way do i need to do this over and over at every gig?
Par pak hex runs on a different remote than the original? My Hex 5 uses the dot par. My hex 3 uses RFC. I was a little upset when I discovered they needed different controller's... So that's 3 different controllers for essentially the same light
When daisy chaining like this Brian at what point would you suggest using a DMX terminator? Is there a suggested length or amount of lights or is it best always using one?
Many thanks. great videos as always.
Thanks Brian for the video
Can you make a video using the remote and moving heads
Thank you I enjoyed your video! Can you please help with setting them in a master slave without remote? Thanks!
do they have to be a pair in order to daisy chain them?
Do you have to do this set up every time you unplug these lights
Hi, I have the Tripar Profile Plus, I bought the ADJ RGBW4C. It doen't seem to work well with this, is it compatible? If so, can you do a video setting this up correctly. Also, for the Tripar Profile Plus do I do the same as on this video, but set the channel to ch04, not ch06?
Thank you for your time with this. I really need this info.
great vid!! just what I was looking for
ciao, sul telecomando quando premo il pulsante strobe va solo il master e non gli slave! hai consigli ? GRazie
Exactly what I was looking for thankyou
what if i wanted to use 12 lights? 6 on one side and 6 on other.. would i break it up into 2 masters and 10 slaves?
Would this be compatible with ADJ 10 pro bar? Please let me know
Hi could i can use this remote on a boom box 2 fx? Thanks!
what remote control model works….?
How do I change the lights manually? Specifically to red. It's on green and doesnt change.
What happens if I put everyone on master and no Dmx cables???
Please do a tutorial for the mega flat tri pak plus model. They have totally different master/slave settings and I have not seen 1 UA-cam video on that particular model.
It should be similar. The very first Mega TriPar may not have been remote compatible.
It is remote compatible, it uses a different remote. This is the one you need " ADJ LED RC wireless remote,"
briansredd I have the mega tri par profile plus it does work with the remote.
Howie Darkstar thanks that's the exact remote I have. Maybe I have it on the wrong address mode.
Great video as always ! Thanks!
Hi I can set my master up correctly but I set the slaves none of my lights say slave there only say SEcd
I am stuck
if i set my second par IR OF you press 2 times on MODE and you see SLAV, i don't get this SLAV and they don't go in master slave modus. i got 4 pars that i want to connect. can somebody help me what to do ?
Cannot find the strobe yet, guess going to be easier with the remote
Also what if my lights don't have a slave mode what do I do about that
Secd
Hi, i am not finding the slav mode when trying to set these up as in the video . Can anyone help please? Thanks
Someone posted a comment that new versions display secd instead of slave now
How to u dmx mega par profile plus
why is my mega hex always going back to strobe?
Turn your strobe rate to 0
I can’t find the Slav mode on my lights
Did you end up finding it ?
@@josepuebla2053 no I check and check but nothing
Same for me. I have a setting called Secd which I don’t know what it means.
Kya prices
The slave button doesn’t show up on my lights can anyone help ?
Were you able to figure it out?
Slave want appear on mines
Wow. Just bought this and watching. Going through the comments I see this guy has not responded to a single comment. Not cool.