Design hone ke bad apko ek bar UNLOCK karna padega file ko, ek Lock ka symbol aata hai upar wahi PLAY button ke pass, use unlock karoge tabhi firse analysis (play) start ho paega
Sir ,i have etab ultimate 19 ,when i assign load then there a box comes written *Error in assigning* after that nothing works properly..what should i do?
Hello sir ji excuse me sir actually mey bhi stabs sikhna chahta mera yeah problem aa rahi hai 40 kn m aa gyaa bhi etabs analysis key baad error dikhata hai why sir?
Do we need to change the property modifiers? The New IS 456:2016, says apply modifier of 0.7 for column, 0.35 for beam and 0.25 for slab. Can you please confirm this?
Please watch the videos carefully, perform each step very accurately, no problem will arise after that. This Tutorial workn in every etab version whether it is 16,17 or 18
Yes same problem in etabs17 ultimate , beam is not analysing, and not showing deflection, in video at the bottom left corner showing Ready(after analysing) , but in my computer it showing "3-D view" .. and not showing deflection of beam...
@@JitendraChoubisa uninstalled the v19 now installing v18 hope problem gets solved n thank you very much for the tutorials, i have downloaded ur msp videos also will watch that after completing etabs🙏🏼
Select the beam, Goto Assign, Frame Loads and then when loading input box appears, there are three options on to the right side, Ad to existing Replace Delete Choose Replace
@@x_factor23 See, if there are multiple loads and if they are of same length, then directly add them, example of a 2kn/m is there and 3kn/m is also there..and they are running over whole span, directly add them and assign it in one go, edit them in one go. and If these two loads are at different location then edit them seperately as mentioned in previous reply
Completely satisfied great explanation 👍
This video is very useful.
Love Sir from Pakistan.
Thank you bhai 😊
U r so brilliant.
Subscribed and liked
Great sir
Hello sir Etabs ko rcdc me le jane ke liye Export Database table option disable dikh raha hai kya krna prega
Slm sir mujay aik problem ye ye play button kam nahi kar ta result show nahi karta or Display Fram/Pier ye b hide hote hai.... Kia karo qb
Design hone ke bad apko ek bar UNLOCK karna padega file ko, ek Lock ka symbol aata hai upar wahi PLAY button ke pass, use unlock karoge tabhi firse analysis (play) start ho paega
Very helpful. Sir
Sir ,i have etab ultimate 19 ,when i assign load then there a box comes written *Error in assigning* after that nothing works properly..what should i do?
same happened with me
now it is not even showing grid system.
what did u do after that please reply
Actually i have also same etab .. bt i have not faced this problem.
@@Structure0156 it worked fine thereafter.
@@Structure0156 problem sorted😊
Dear sir, are you still teaching ETabs?
Yes, You can send your queries at yt.jitendra.choubisa@gmail.com
Hlw sir please help.. run main job click karta hai...error in creating analysis model ata hai.. please help
Hello sir ji excuse me sir actually mey bhi stabs sikhna chahta mera yeah problem aa rahi hai 40 kn m aa gyaa bhi etabs analysis key baad error dikhata hai why sir?
Mera system hai intel i5 4th generation, 256 gb ssd,16 gb ram,gtx 730 2gb graphic card pls reply me sir
Sir kya etabs sikhney key liyey manual beam,slab,column,footing ka manual ana chahiye ?
Hello mere pass etbas 2020 hai chalega aur etabs key ya structure design key konsa processor and graphic card acha rahega?
Do we need to change the property modifiers? The New IS 456:2016, says apply modifier of 0.7 for column, 0.35 for beam and 0.25 for slab. Can you please confirm this?
Actually IS 13420:2016
@@Structure0156 Yes, that's correct. IS13920:2016. Page 11 or 12
Sir I have etabs17 ultimate but beam is not analysing.
Please watch the videos carefully, perform each step very accurately, no problem will arise after that. This Tutorial workn in every etab version whether it is 16,17 or 18
Yes same problem in etabs17 ultimate , beam is not analysing, and not showing deflection, in video at the bottom left corner showing Ready(after analysing) , but in my computer it showing "3-D view" .. and not showing deflection of beam...
I too faced the same issue... If you have found the solution plz let me know
@@rahulmore2439download 16 version
@@kaashhxyz4716 same in my laptop also
where u r teaching this on which platform ?
I'm Using Zoom app for talking classes, while conducting classes I usually Records the session and upload it here.
Ok I'll share it with you from now on
@@JitendraChoubisa had u noted number so that i can delete my publically available wp no
@@pranityewale7078 I've deleted already
Sir plz provide your no
SIR, I run it successfully but it doesn't show any deformation. and no f8 key run.
Try it again, follow each of the steps carefully.
Sir , why x=4 in 2nd question???
Number of grid lines are 4 in x-direction, not x =4. And It is because we have 4 support, each of the grid line will pass through each support.
@@JitendraChoubisa Sir or your video lecture is very useful.
Par sir ye 37 video pure etabs ko cover kar rha hai ya abhi aur videos upload honge??
@@sandeepsoni6628 deko structural engineering me bit advance chige or bh hti h jinke video me dalunga, par ek bar itna bh krloge to bh kaam hojaega
Sir beam to design ho gaya, analysis bi kia but ho nehi raha hai
Kya problem aarahi hai, Software kya bol raha?
@@JitendraChoubisa ku6vi nehi maine press kia analysis uske bad bending moment diagram nehi a raha hai apki video ki tara
Aaapne sari steps follow kari hai dhang se?.
@@JitendraChoubisa ha sir
Sab ku6 step by step follow kia maine
Sir how to show geopolymer properties
Sir run analysis me error aare.lekin moment 40 aata hey
What error?
sir analysis hua pr bendind moment diagram nahi batara
Display me show shear force bending moment option ko select kro
@@JitendraChoubisa sir ye show kaise hoga
showing error in assigning, after that screen turns white n hangs
after applying uniform load of 5kn the screen gets jammed and gets all white, 2se 3 baar aise hi hua after applying 5kn load
I think your etabs isn't installed perfectly, or graphics driver needs updation
@@JitendraChoubisa uninstalled the v19 now installing v18 hope problem gets solved n thank you very much for the tutorials, i have downloaded ur msp videos also will watch that after completing etabs🙏🏼
can u share link with me
Load bad me change krna ho to
Select the beam, Goto Assign, Frame Loads and then when loading input box appears, there are three options on to the right side,
Ad to existing
Replace
Delete
Choose Replace
@@JitendraChoubisa suppose we've multiple dead load to assign a beam after assigning i need to change one of the dead load. How to do this.
@@x_factor23 See, if there are multiple loads and if they are of same length, then directly add them, example of a 2kn/m is there and 3kn/m is also there..and they are running over whole span, directly add them and assign it in one go, edit them in one go.
and If these two loads are at different location then edit them seperately as mentioned in previous reply