Good video and very useful information, one thing I would mention is when you assign an M-code you want for the parts count up, make sure it is a spare M-code available on the machine. On a Feeler VMP-580apc with Fanuc Oi-MD I work with, I wanted M60 to replace M30, but it did not work as the cycle would completely stop once it got to M60. I read through the owner's manual for it and codes M31-M38 were listed as functional codes but no assignments, while M60 was listed but left blank and not listed as optional/available. Just a little food for thought.
I looked in the book that came with our used elite 8/51 and I followed the directions but I couldn’t get the counter to work until I followed his instructions.
@@gilforin I got this Oi-TC on a Femco VL-25 VTL and I am having alot of trouble with tool changes. The machine all of a sudden gives me a message 3004 address not found. allot of times I take a tool out of the pocket and manually but it in the bar. I was wondering if there is a way to override this thing so I can manually get it to the tool change position. These tools are heavy LOL And thanks for the reply.
Ok, I think the way I would do it is in the Ladder logic, putting a Normally in front of the MDI activation coil. But I would also put a Keeper relay under it so that it could be bypass by the maintenance department.
Sometimes the manufacture of the machines protect with a password, parameter 3210 but you have to call the machine builder and ask them. Normally the machine Model and Serial número at hand will help
Premsingh Thakur I think the best option is to add a password to the parameters. I think it’s parameter 3210 or 3211. Check your Fanuc manual on how to activate the password
Good video and very useful information, one thing I would mention is when you assign an M-code you want for the parts count up, make sure it is a spare M-code available on the machine. On a Feeler VMP-580apc with Fanuc Oi-MD I work with, I wanted M60 to replace M30, but it did not work as the cycle would completely stop once it got to M60. I read through the owner's manual for it and codes M31-M38 were listed as functional codes but no assignments, while M60 was listed but left blank and not listed as optional/available. Just a little food for thought.
u saved my life😂 appreciating from Korea🇰🇷
I looked in the book that came with our used elite 8/51 and I followed the directions but I couldn’t get the counter to work until I followed his instructions.
Thanks
Are you still messing with these controls? I know this is a way old video. I may have a question. Thanks
Ask away
@@gilforin I got this Oi-TC on a Femco VL-25 VTL and I am having alot of trouble with tool changes. The machine all of a sudden gives me a message 3004 address not found. allot of times I take a tool out of the pocket and manually but it in the bar. I was wondering if there is a way to override this thing so I can manually get it to the tool change position. These tools are heavy LOL
And thanks for the reply.
Thanks 👍👍
in 6712 paramaere there is total part count can I lock that parameter
Tanks bro
Is there a way to count two pieces at a time in each cycle?
what if the 6700 parameter is already 0? how to I zero out the parts count
Good
Hi. I have a fanuc 6M enshu VMC 400 machine, now occur 1080 counter alarm. I really don't know how to avoid this alarm. Pls help! Thank you!
Is there a way to make it trigger from an m99?
Hello Sir
How to change CNC Display location
This video not clear and you show very fast again shoot video in slow motion
Sir..
Plz tell me about parameter.. MDI lock with exit key.
Example.. Exit key on.. I use MDI..
Exit key off.. I don't use MDI
Pawan Kumar I’m not sure I understand the question
Ok, I think the way I would do it is in the Ladder logic, putting a Normally in front of the MDI activation coil. But I would also put a Keeper relay under it so that it could be bypass by the maintenance department.
MDI means manual direct input.
Sir Parametere enable /disable function not working
Conditions correctly on MDI mode
1' input but not enable
Did u got the answer?
Sometimes the manufacture of the machines protect with a password, parameter 3210 but you have to call the machine builder and ask them. Normally the machine Model and Serial número at hand will help
How to increase part number in cnc and vmc please tells me sir
Sir i want to lock part count so that operator could not change ; is that possible so guide me
Premsingh Thakur I think the best option is to add a password to the parameters. I think it’s parameter 3210 or 3211. Check your Fanuc manual on how to activate the password
Hey I got the tool life alarm and Idk how to disable it or start it again. Does anyone know how to reset it?
Tool life alarm normally has to do with the manufacture. Maybe provide an alarm code
Sir how to check graph on fanuc io mate tf
Hindi me bhejo
Batan ka pta chal na rha