Sony Bravia TV blinking red light, Easy Fix, No parts required
Вставка
- Опубліковано 1 жов 2024
- If your Sony Bravia switches off and flashes the red standby LED 7 times, this video shows why and how to overcome this problem. Ensure mains power is disconnected.
Anyone know how to fix two blinks on a 2011 Bravia KDL-40EX724? I googled it and it they say it's some over current protection unit that's gone into standby mode.
Having issues with four blinking lights. Any recommendations?
Same here. 4 blinks, no power to view TV.
Followed your instructions. Couldn't get the back off our 48" Bravia (now 10 yes old) but managed to get to the part concerned. Cut wires 11 and 12. Working again. Brilliant stuff. Thanks so much for sharing. 👍🏼
Great to hear
How do u know which is the 11th and 12th wire is thanks and in my Sony I cannot see this board I have a 65 inch do I look for something with 12 wires thanks
@@alwaysafix How do u know which is the 11th and 12th wire is thanks and in my Sony I cannot see this board I have a 65 inch do I look for something with 12 wires thanks
@@glynnwatkins1693 there's a legend on it you can see it on the board as what he says on his video
Thanks ! Took care of my issue too on my KDL55
Love the vids! Challenge: I have a 2012 Bravia KDL-46BX450 and sensor only has 10 cords. Do you suggest I start from the far right and start disconnecting? When I click the power button, the Sony logo comes on then the screen goes black and stays that way. Any suggestion before I recycle my favorite TV would be great!
If you were like me & couldn't even get your TV to boot far enough to do a hard reset, your in trouble. You see, I turned the Back-light (which was failing) from 5 to 7 and the TV instantly shut down & went into an endless boot loop.
Well, just get yourself the brightest LED torch you can find & shine it straight into that auto light sensor on the front of the TV at boot up. This sucks the TV into thinking that it is as bright as the sun in your lounge room and it turns down the back-light to 5 automatically at boot up. Once that happens your TV will start & you can then quickly do a hard reset and once that is done go to options & turn the back light down to 4 or leave it set at 5 but no higher. Then turn the brightness up to max or near max & you won't even be able to tell the difference. You TV will work properly for a few months more, but U better start saving for a new one because the back light (or the sensor) is already past its use-by date & it won't last forever.
good ideal, i'll try it, thanks
I also have the same issue buy on a different model, so it's either swapped the LED driver board or just cut the wire and ground it?
I had to unplug the whole jack instead of just cutting some wires, then you could turn on the TV using the power button on the back of the TV, and use an app to control the TV instead of the remote. Note that if hanging on the wall, the vents must be left open on the back of the TV, it is best to put it on the table
hallo my sony bravia 4k tv Sony KD55XF9005 4 times blinking red light what now????? thank you
4 blinks indicates hardware fault, probably LED backlight fault, LED driver board.
Brilliant yes it worked . Thank you I had to butcher the back panel to get to the 11th 12th wire but a little tape should make it nearly as good as new😅.
No one is going see the back panel anyways, congrats on your fix.
Hi sir I'm going through the same situation here The only difference is mine is blinking red light 5 times so please I really need your help
Minds too on my garage
Thanks for this fixed our old bravia kdl. Hardest part of the whole thing for me was getting the back of the tv. After that easy had to watch your vid a couple of times to select the right wires. But once I saw that it was the ones at the opposite end to the only white wire, simple.
Please, can you tell me the serial number of the white wire and the wire to be cut? I am understanding that the white wire is the number 2 wire and the wire to be cut is the number 11, right? Thanks.
I have kld46x3100.blinking 8times.
Does anyone know which wire needs to be disabled?
Thanks in advance
I am facing this issue with Soni Bravia 40" but unsure about which wire to cut
Did you try fix it like this video? Or another way to fix? Tell me, pls, i have same problem and same tv.
Freakin garbage product. Watching the damn red light blink as we speak. Trash
Hi sir, my tv is KLV 40S550A, having same issues with 7 blinks. Ive remove the back cover but im seeing HLSA board which consist of 10 wires only. Im confused
sir my tv is also sony KDL - 40EX710 it has red lighting problem i removed the remote circuit tv works fine Which number of wire do I have to cut?
Hi, I have a Sony Bravia XBR-55X807E, are about 1 minute it blinks 7 times then powers off. I tried removing pins 11 and 12 but it still powers off, can you help?
Hi i have a KDL-40R470B SONY 40" which is giving 6 blinks is there anything i can do to fix it. Thanks
Mine only has 6 wires any help?? Thanks it’s a Sony kdl-40r453c
The conector of the board on my Bravía KLV-40BX400 has only 10 pins.
My Sony LED TV giving error ...Red light blinking 6 times.
KDL42w845a
Pl suggest what may be the fault?
Hello would this work for my KDL-40R470B SONY 40" which is giving 4 blinks.
Sorry this will not work for you, your TV has a backlight issue. Good Luck.
Thanks so much
Took out the back cover to fix volume problem. Fixed the back cover but now I can not plug HDMI cable as the cover has not gone down completely. The cover doesn’t allow the plug to be fixed. All cover bolts are tight. Can you help?
Sit my Sony bravia klv ex310 32 Inch led tv red light 5 time blinking 1 time flash display how can I fix sir pleas
I am having the same issue suddenly for last 2 days
Tv was off ( not on standby ) from last 10hrs
but when I unplug power cord and set top box and re connect power cord tv works fine then I reconnect set top box watch tv for works without any problem
Hi @alwaysafix i have a Sony Bravia model KDL 40VE5 and when plug in to AC the Stand by led is red then press power button and red led is off and green led ON few seconds a tic sounds and green led is off then red led is on. TV not start images no sounds, no pictures, no led blinks. I repeat turn on TV and the same happens. What do you recommends? Thanks
I have all of those gray/white cables disconnected. Is there Any way to know in which order i can put them Back?
Hi. I think I fucked up the cables and now it doesn't even turn on. How or where can I send you an email to get the schematic? Please help.
Having same issue 5 blinking lights wont power on 8 seconds in it turns off and blinks red light 5 timez pause 5 times pause etc
3 blinking problem sony bravia kdlex-46
Hi. Do you perhaps have all the blink codes or where can I get them please.
Hello I have a Bravia Sony 2018 it's 65 inch and it keeps turning off and on on its own. I can't do a hard reset because it turns off. I pull wire 11& 12 just in case it was the sensor because I believe it does have to do with power saver. Is there another one I can try to pull ? At this point we are ready to trash it, but, of I can fix it that would be awesome!
Did you try fix it like this video? Or another way to fix? Tell me, pls, i have same problem and same tv.
Same lmk
I tried everything but it never worked, found this video and tried but still didn't work. After lots of research we decided to put it out for trash. So upset!
@@butterfliesandbeehives2190 that's too bad. Trying myself.. Prolly.something.ez too.
I’m having issues with my KDL-52EX701 it’s got 6 blinking lights? Do you have any idea how to fix?
Wega Sony 40 inch 10 blinks red please help.
I have same issue with same model. What should I cut? Pin 11 and 12 or Pin 11 only?
Kinds sounds like your disarming a bomb lol
Hello I watched your UA-cam video sir and I'm very impressed with all your videos I have a Sony Bravia XBR 758 940c and Z I'm getting 4 blinking red light Saturday night I was watching TV and and then on my her to the entertainment still going like the movie was playing when I woke up but the TV was off and I seen where it was blinking for red LEDs underneath the TV screens so I turned it off right away and then I turned the power conditioner off and I repower duck and the TV started back working again and I watch TV from Dad Saturday morning all the way till like Monday morning and then I started watching a movie with a TV screen was going black and then end up program was showing dinner was going black and then all the sudden I figure let me turn it off I unplugged it and then I power power down the power conditioner and I plug it back up and then all the sudden the red blinking light reappeared with
Hi. Which number wire do I need to disconnect for 6 blink error?
Hello sir, I am having an issue same as this but with 6 red blinking lights
Dear sir our Sony tv NSX32GT1 has good audio but no vedio/picture. Now when switched on red light blinking 3 times instead of green light to connect with my set. Kindly suggest and help with the solution.Thanks.
i unplugged the 1 and 2 cable and it work but without tv controller (my mistake) then do it with 11 and 12 and i have watch 2 movies since then , thanks master! my tv 55hx800
You are welcome, thanks for watching
How to fix 8 flashes on kdl40w5500?
Different model KDL-43W800C. White screen then backlight turns off (black screen) and 5 red blinks. Cold blower on the sensor slots, bottom center of the TV, to release probably dust particles. Now working fine.
nice
Any help?, I have a screen with a single red flashing light
Hi @alwaysfix I disconnected 11 and 12 and my tv works but my remote now not working, how to return my remote TIA!
I'm having the same problem
good video Bru. Hope it saves my Bravia 😬
Might you know what 6 blinks is?
ty
sony kdl46hx800
how did you manage to discover the defect?
It was not my discovery, the advice to check those wires came from research on the forums.
First of all start talking fast. !!
Your a Legend Mate🤛🤛🤛, luckily didn't have to remove any of the pins, worked for me!
Congrats on your fix
my sony kdl-46nx700 has 6 blinking how to solve o and i bought new led strips still no lights please help
Hi, I have a model KD- 7559000B which is about 7 years old 75 inch great TV but recently flashing 9 times and shutting down, l have cleaned the vents and also have a fan directed at the back of the TV but the shut down is more frequent. Appreciate any tips like removing the back and maybe vacuuming the inside?
Did you manage to fix it?
Hi just tried the removing remote sensor for 4 blinks sadly no success the lamps seem to be struggling before set switches off . Do you advice for 4 blinks? Thanks for sharing
Try disconnecting the backlight error return cabke between motherboard and power supply. 4th wire front wire down from top of block connector on power supply. Ground the free end from the motherboard. 4 lights I think is backlight error code. That or power supply failure.
Ours is a non smart TV ours do 5 blinks
My Sony had 11 wires
Mine isn't turning on n have tried ur procedure is there any other way u can help me
3blinks
What do I do if my thing just stays red
Hi there i have sony ex56-kdl bravia with 3 blinking lights any help please
Please help i got a sony bravia 46 inch kdl-ex 3 blinking light problem
Don't you have any tweezers? Removing that one wire with your fingers seemed to take forever.
Ye, it doesn't always go to plan when you are recording, take away the camera and I am 3 times more efficient.
I have a Sony Bravia 65x800g that's giving me 6 blinking lights (LED backlight error code) and, upon taking it apart and testing the backlights, I found that they all seem to work fine. Now I'm not sure if it's a PSU issue or something to do with the tcon.
I have this tv and six flashing lights as well. Did this wire trick work for you?
@@erinschmiedekamp4037unfortunately not. I had to replace the backlighting entirely.
Thanks for uploading video, I have fixed my tv .
You are very welcome, Happy holidays
Thank you so much ! You saved my TV
nice
This worked on my Sony BRAVIA KDL55HX800. Thank you so much for doing this video and for sharing your knowledge.
You are welcome, congrats on your fix
I pulled 11 and 12 and now My tv stays on but remote won’t work. Does this affect the remote too?
I had the same issue :(
No power no red lights where can I get mother board
This fixed my Sony KDL-55HX800 (7 blinks) by removing wires 11 and 12 from the plug. Almost ordered a new power board. Glad I didn't. So far so good.
I just LOVE your accent!
Thankyou
????????
You my man are an absolute legend!
cheers
Having the same issue with a Sony Bravia KD-60X6700E.
Same here, how do you fix it?
@@mugilansubraiyan4961 i found out it was related to the onboard amplifier, so i disconnected the speakers and the tv booted up.
I need help with mine it’s a smaller than a 32 inch but it has the same problem and I would like to fix it myself
Did you try fix it like this video? Or another way to fix? Tell me, pls, i have same problem and same tv.
This fix worked for me. Thanks! Keep up with the good work
Congratulations on your repair, thanks for watching
👍
How do you fix it
omg, have my babies, it worked flawlessly :0
lol, happy days
@@alwaysafix update, I also had to unplug the 10th, can I get the pinout of the Hlr you have to see if mine is different?
its work nice job 👍
👍
It works for me. ❤
Very nice, congratulations on your fix.
Thanks so much
Hi thank you for this great video. Can you please send me the schematics of the wiring. Thank you.
have you done that yet? Is it successful?
Great to see your video. I have the same problem with my Sony Bravia TV blinking red light 7 times. Grateful if you could tell me the detail of the wire disconnecting.
have you done that yet? Is it successful?
Can you please send schematics and which wires to disconnect. Thank you very much
have you done that yet? Is it successful?
Thank You much Sir very helpful video long live
You are very welcome
Please help me my tv blinking red light 5 times
Mee too....
I'm also facing same issue.
The indicator under SONY logo started blinking for 5 times and the tv screen turns into some pale white shade and then goes off and the blinking starts.
The blinking not going off until I remove the actual plug behind TV.
I've updated software and unplugged the other sources(DTH via HDMI, USB). Ive also plugged tv into a different power outlet.
It seems like serious issue.
@@getluped same
@@renorainesrenegade same find a fix?
@@megatron7057 AC/DC board. it doesn't matter now, this TV is priceles😠
My sony bravia just went blank
good
I have the KD-65X9000 red light flashing 7 times. same procedure u think? Just happened for the first time today.
Did you try fix it like this video? Or another way to fix? Tell me, pls, i have same problem and same tv.
@@Sang-KTVHN didnt work.
@@SamerFrem So did you fix it in any other way?
@@Sang-KTVHN no. still in my depot.
@@SamerFrem i fixed it. I had to unplug the whole jack instead of just cutting some wires, then you could turn on the TV using the power button on the back of the TV, and use an app to control the TV instead of the remote. Note that if hanging on the wall, the vents must be left open on the back of the TV, it is best to put it on the table.
Thank you so much, you just gave my 10 years old TV some more time ! Worked like a charm.
Great news!
You are awesome! this worked for me! I disconnected 11 and 12
Does the remote still work after that? Need to cut both 11 and 12 wires or only 11? Thanks.
Is it 11-12 on the right side near the right specked ? Or 11-12 on towards the left specked the white and gray ?
@@johnpal9142 I have unplugged both 11 and 12 and it doesn't work, but unplugged the jack is ok, but after that you have to install an application remote tv by smartphone
sony KDL-40EX500 with 6 led blinks . used eBay inverter board same issue (ordered another) ccfl backlit. Going to try this fix. Thanks.
Any updates on this fix?
Sony KDL46EX710 Everything works now! Thanks a MEGA!
You are welcome
Thank you so much sir I try it and I got it right . Much love sir....
have you done that yet? Is it successful?
If I remove this piece, can I keep it out? I don’t use a remote with the TV so will it still work okay without putting this back? Not sure if I can do the wire part, but I’ll see!
Did you try fix it like this video? Or another way to fix? Tell me, pls, i have same problem and same tv.
@@Sang-KTVHN Yes I did! I took the piece out completely and didn’t put it back. It worked fine.
The only thing is that the red light (that shows the TV is on) no longer comes on, so just be aware of that. Otherwise no issues, and you can still access all the menu options using the buttons on the TV.
@@Loren400 thanks. Why don't you try cut the 11th wire (like in this video), maybe remote can work.
@@Sang-KTVHN I don’t have a remote in the first place, so didn’t need that part to work. I use my TV as a computer screen so works fine like this.
your email please