One of the better videos of this type. You can see the increase in shaft speed between the rotor and the generator via the gearbox, and then an outside shot for good measure. We can even see the brake disc and caliper. Good Job.
ua-cam.com/video/YjR9Xv1aUHY/v-deo.html تغير رولمان بلي واولسي وصيانه لماتور واحد حصان بطريقة سهله جدا اتمنى الاشتراك في هذه القناة لمشاهدة جميع الفيديوها
The sound wich you hear at 2:04 is the synchonisation to the grid, this happens via a automated device wich is detecting the grid and generator frequency and the phase position, when the phase positions are equal then the grid contactor gets closed. The contactor needs time to close, because of that the controler will trigger the closing a bit to early wich makes the wiing sound. The critical thing is, if you miss the point to synchonise you have to slow down the turbine, thats more difficult as to start. The typical synchronisation point is 1530 - 1545 RPM at Generator at 50 Hz grid frequenzy. After synchronisation the generator will run at 1550 RPM.
Even when knowing that the reducer has a gearing ratio of 1:60-1:100, it's still surprising to see how fast can the 24rpm of the blades make the generator shaft turn.
I love the sound when get switched to full load. Only issue they should have wait for a nother couple of seconds to allow the output to speed up to working speed then switch the load on.
ua-cam.com/video/YjR9Xv1aUHY/v-deo.html تغير رولمان بلي واولسي وصيانه لماتور واحد حصان بطريقة سهله جدا اتمنى الاشتراك في هذه القناة لمشاهدة جميع الفيديوها
is there a safety feature that will quickly bring the blades to neutral or heavy pitch if the gearbox would break, the winds suddenly pick up, or the hydraulic motor would fail to operate?
The pitch system is the main brake. If anything goes wrong or the wind increases over capacity the blades will pitch to 90 degrees under battery power (running position is around 0 degrees). Air resistance will slow the rotor down dramatically and then the hydraulic brake will do the rest. The hydraulic brake is similar to what a car has as a braking system. Edit: Some turbines are hydraulic pitch instead of battery (electric) pitch. They move the blades via hydraulic ram.
Wind turbines are torque monsters (look at shaft dia at 3:28). They produce massive torque at low speed and hence a speed multiplier gear box is used to run a practical alternators. If we have to couple wind turbines directly to alternator, the anternator will have huge diameter with so many poles, making it impractical. 0:13 = Disc brakes to stop the turbines when the wind speed it too high.
Ist es eigentluch möglich, den Übersetzungsbereich zu erhöhen, sodass Windräder selbst bei Orkanwindstärken Energie erzeugen, oder tuen sie das bereits schon?
Kannste machen, bringt aber nur, dass die Stromversorgung bei dem Wind nicht wegfaellt. Die kWh wird damit teurer (bisschen mehr Produktion, viel mehr Investition).
ua-cam.com/video/YjR9Xv1aUHY/v-deo.html تغير رولمان بلي واولسي وصيانه لماتور واحد حصان بطريقة سهله جدا اتمنى الاشتراك في هذه القناة لمشاهدة جميع الفيديوها
I'm not sure I like the idea of the brake being on the alternator side of the transmission. If the transmission fails, the ONLY chance you have of controlling rotor speed, is to pitch the blades.(feather them into the wind) If the transmission failure caused damage to the pitch actuator, you've got a run-away on your hands!
I think the same. there should be a way to put the gearbox in neutral (like a car) to stop from generating power and also lock the blades from the blade side. We already saw in case of tornado the disc braking system is useless
its an active stall wind turbine, so it only has movable tips. there is likely 0% of a chance that a fail will damage the actuator (Which automatically puts out the tips in case of a pressure loss). If its a hard damaged like this, there is a high chance of everything falling apart in general.
Is the rotor always on the same gear ratio? when wind speed goes up, how does the frequentie stay 50 Hz. And how can you increase the power output on the same frequentie? (Bigger ampere? so coils of generator closer to rotor?)
@@dickievanleijen1545 The generator has a variable electromagnetic field. If the wind increases, the rotor speed increases, the RPM increases - so the control increases the generator field strength which makes it convert more mechanical into electrical energy. As a result, the load on the rotor increases as well and it slows down. So higher wind speeds result in higher power output at the same RPM.
Wir waren Auftragnehmer des Besitzers, aber der hat jemand günstigeren gefunden😉 aber so komme ich auch ab und zu auf anlagen in der Nähe. Besonders da bei Osterfeld bin ich oft
Ja, grundsätzlich schon, aber die Sicherheitsvorkehrungen bei "Gästen" sind recht hoch, daher muss man da etwas Zeit mit bringen. Zudem solltest du nicht unbedingt über 120kg wiegen, wenigstens etwas Sportlich sein, weder Raumangst noch Höhenangst haben oder gerne mal Reisekrank werden, wobei dazu gibt es Vomex, je nachdem auf welchen Typ Anlage man ist. Da gibt es nämlich unglaublich viele Unterschiede.
It is the brake that keeps the turbine on a constant speed.. And if it goes faster than the normal and this brake can't keep it, it activates the emergency brake and stops the turbine :)
No, that's not true. The DISK BRAKE is for stopping the turbine. At this (older) turbine there is a asynchronous generator, wich run at CONSTANT speed by the 50-Hz-GRID!
Based on the input and output spinning in the same direction it is a 2-stage; the small blade rotor diameter and the small generator it is likely 1:60-1:80 at the highest.
I am the Innovator of THE NEW WAY TO TRANSFORM ENERGY WITH MYū UCRÓS ELECTRIC CYCLE SYSTEM of the Republic of Colombia South America Carlos Ucrós WhatsApp +57 3012358709 ua-cam.com/video/5QQ4NWpbQYc/v-deo.html ua-cam.com/video/JZ8cprmbdA0/v-deo.html www.ucrosenergysystem.com Soy el Innovador de LA NUEVA FORMA DE TRANSFORMAR LA ENERGIA CON MI SISTEMA CICLO ELECTRICO UCRÓS de la Republica de Colombia Sur America Carlos Ucrós WhatsApp +57 3012358709 ua-cam.com/video/5QQ4NWpbQYc/v-deo.html ua-cam.com/video/JZ8cprmbdA0/v-deo.html www.ucrosenergysystem.com
Que tonterias,subit ariba tantas cosas !!Un fiasco de engeneria !No voi a hablar de poco que produce ,comparativo con el precio !Una .....!!!!Pagas por ella el precio por 20-30 anos de consumo en aval mas el impuesto de productor de energia cada mes !!Buen bisnis para Los que lo vende !
Over engineered piece of crap meant to break and maintain Just because the horizontal axis worked on old wooden wind mills won't necessarily work on modern ones High speed rotating components ,breaking system all those moving parts mean lots of maintenance and work The worst of all is the gearbox
As long as the wind speed isn't above safe limits, it's perfectly OK to be up there. Once the wind exceeds a certain speed, then, OSHA will not allow occupancy of the nacelle. That wind speed varies from site to site, so I can't give you an actual wind speed. (usually 30 MPH or less)
One of the better videos of this type. You can see the increase in shaft speed between the rotor and the generator via the gearbox, and then an outside shot for good measure. We can even see the brake disc and caliper. Good Job.
ua-cam.com/video/YjR9Xv1aUHY/v-deo.html تغير رولمان بلي واولسي وصيانه لماتور واحد حصان بطريقة سهله جدا اتمنى الاشتراك في هذه القناة لمشاهدة جميع الفيديوها
The sound wich you hear at 2:04 is the synchonisation to the grid, this happens via a automated device wich is detecting the grid and generator frequency and the phase position, when the phase positions are equal then the grid contactor gets closed. The contactor needs time to close, because of that the controler will trigger the closing a bit to early wich makes the wiing sound. The critical thing is, if you miss the point to synchonise you have to slow down the turbine, thats more difficult as to start. The typical synchronisation point is 1530 - 1545 RPM at Generator at 50 Hz grid frequenzy. After synchronisation the generator will run at 1550 RPM.
Thanks for that bit of knowledge!
Interesting info, thanks.
Isn't it a dc generator, then why it needs to be synchronized? I thought that some inverters do the job.
Isnt 50Hz exactly 1500rpm ?
@@el9551 Only some brands use variable speed dc gens. (Enercon).
so was sieht man nicht jeden Tag, bitte mehr davon.
so was könnte ich aber ganzen Tag gucken ! ))) jaa mehr davon )))
War wirklich mal interessant das Innenleben von so einem Windkraftrad zu sehen sehr sehr tolles Video danke schön Grüße Christian👍😃👍😃👍😃👍
Even when knowing that the reducer has a gearing ratio of 1:60-1:100, it's still surprising to see how fast can the 24rpm of the blades make the generator shaft turn.
@@mimomasr ???
This is crazy! Not much speed, but soooooo much torque. Unstoppable, screems Danger Danger even while watching on a tablet :) Thanks for posting this!
Thanks, that was very interesting. It is hard to find this kind of videos.
Dude that thing really got cranking
That's some serious torque
I love the sound when get switched to full load. Only issue they should have wait for a nother couple of seconds to allow the output to speed up to working speed then switch the load on.
That plane must be huge!
Oh, you spoilt my joke with the outside shots.
ua-cam.com/video/YjR9Xv1aUHY/v-deo.html تغير رولمان بلي واولسي وصيانه لماتور واحد حصان بطريقة سهله جدا اتمنى الاشتراك في هذه القناة لمشاهدة جميع الفيديوها
...and that my friend, is how, wind is made! :D
The machine that will contribute drastically to saving mankind.. Nice breeze just blew through as I typed that up :)
Wie süß das sind ja noch unsere alten Anlagen mit den 50er Blättern dran
Looks amazing!I wish I could work as a wind turbine technician in abroad!
beautiful , it's very nice
is there a safety feature that will quickly bring the blades to neutral or heavy pitch if the gearbox would break, the winds suddenly pick up, or the hydraulic motor would fail to operate?
The pitch system is the main brake. If anything goes wrong or the wind increases over capacity the blades will pitch to 90 degrees under battery power (running position is around 0 degrees). Air resistance will slow the rotor down dramatically and then the hydraulic brake will do the rest. The hydraulic brake is similar to what a car has as a braking system.
Edit: Some turbines are hydraulic pitch instead of battery (electric) pitch. They move the blades via hydraulic ram.
Great video. Thanks for posting this. Have a nice day.
I’d love to learn more about how these machines work. Does anyone have any good website or other video suggestions?
how can i get such a gearbox
Very nice working videos. Thanks to showing.👍👌
Excellent sustainable & reliable technology
Welches Getriebe ist dort verbaut ? Eickhoff ?
That's beautiful
Ich wusste nicht dass der Windkrafträder auch Geräusche macht sehr interessant
ist das der windpark an der A9 Richtung Berlin
Ja
Why does it take so long for the blades to pick up speed
Their mass, it's inertia at play
Very nice view from on top the BirdChopper9000
Wind turbines are torque monsters (look at shaft dia at 3:28). They produce massive torque at low speed and hence a speed multiplier gear box is used to run a practical alternators. If we have to couple wind turbines directly to alternator, the anternator will have huge diameter with so many poles, making it impractical.
0:13 = Disc brakes to stop the turbines when the wind speed it too high.
Ist es eigentluch möglich, den Übersetzungsbereich zu erhöhen, sodass Windräder selbst bei Orkanwindstärken Energie erzeugen, oder tuen sie das bereits schon?
hat kein sinn, Orkanwindstärken gibt es fast nie. Also ist es wirtschaftlich nicht logisch
Kannste machen, bringt aber nur, dass die Stromversorgung bei dem Wind nicht wegfaellt.
Die kWh wird damit teurer (bisschen mehr Produktion, viel mehr Investition).
Wiele z tych smigiel wykonalem w Rostocku i Bremen. Pozdro
Warum sagt keiner was dazu?
Surpreende como gera, e Como consegue multiplicar a velocidade.
É sim meu anjo. ☺🥰
Ich habe jetzt schon höhenangst
ua-cam.com/video/YjR9Xv1aUHY/v-deo.html تغير رولمان بلي واولسي وصيانه لماتور واحد حصان بطريقة سهله جدا اتمنى الاشتراك في هذه القناة لمشاهدة جميع الفيديوها
I'm not sure I like the idea of the brake being on the alternator side of the transmission. If the transmission fails, the ONLY chance you have of controlling rotor speed, is to pitch the blades.(feather them into the wind) If the transmission failure caused damage to the pitch actuator, you've got a run-away on your hands!
I think the same. there should be a way to put the gearbox in neutral (like a car) to stop from generating power and also lock the blades from the blade side. We already saw in case of tornado the disc braking system is useless
its an active stall wind turbine, so it only has movable tips. there is likely 0% of a chance that a fail will damage the actuator (Which automatically puts out the tips in case of a pressure loss). If its a hard damaged like this, there is a high chance of everything falling apart in general.
.....herrlich...diese Technik.......
Super mooi om dat eens vanbinnen te kunnen Zien.
Interesting, but what is the fire extingusher good for if no one is present?
To put out fire when someone is there so that they dont die.
Ist das eine Gamma oder Delta Anlage ? Ps bin Servicetechniker bei Nordex
Ist eine alte, da gab es die Plattformen meine ich noch nicht
Braucht's Starthilfe oder dreht's von selbst?
nice clip, thank you
Super video!!!
How often is it correcting the yaw?
This wind turbines how many MW?
what is the gear ratio there?
1:79
Is the rotor always on the same gear ratio? when wind speed goes up, how does the frequentie stay 50 Hz.
And how can you increase the power output on the same frequentie? (Bigger ampere? so coils of generator closer to rotor?)
So, how does de outputshaft doing 1550 Hz stay at 1550 Hz
@@dickievanleijen1545 The generator has a variable electromagnetic field. If the wind increases, the rotor speed increases, the RPM increases - so the control increases the generator field strength which makes it convert more mechanical into electrical energy. As a result, the load on the rotor increases as well and it slows down. So higher wind speeds result in higher power output at the same RPM.
Ooooop nice😂😮😢 love from India ❤
Thanks
das doch Coswig, ich wohne in det Nähe :-)
Ja, das sind die Anlagen an der A9 bei Coswig. Auf der Anlage war ich schon zwei mal 😄👍
@@saasch_baasch echt, kommst du da noch hoch ? Würde mir die auch mal gerne bin oben besichtigen😁 stehen bestimmt nicht mehr lange
Wir waren Auftragnehmer des Besitzers, aber der hat jemand günstigeren gefunden😉 aber so komme ich auch ab und zu auf anlagen in der Nähe. Besonders da bei Osterfeld bin ich oft
@@saasch_baasch besteht da die Möglichkeit mal mit hochzukommen ?
Ja, grundsätzlich schon, aber die Sicherheitsvorkehrungen bei "Gästen" sind recht hoch, daher muss man da etwas Zeit mit bringen. Zudem solltest du nicht unbedingt über 120kg wiegen, wenigstens etwas Sportlich sein, weder Raumangst noch Höhenangst haben oder gerne mal Reisekrank werden, wobei dazu gibt es Vomex, je nachdem auf welchen Typ Anlage man ist. Da gibt es nämlich unglaublich viele Unterschiede.
Представляю что будет, если колодки забудут поменять .,,,
The sound of the minute 2:03. Is the generator?
It is the brake that keeps the turbine on a constant speed.. And if it goes faster than the normal and this brake can't keep it, it activates the emergency brake and stops the turbine :)
No, that's not true. The DISK BRAKE is for stopping the turbine. At this (older) turbine there is a asynchronous generator, wich run at CONSTANT speed by the 50-Hz-GRID!
I could be wrong but its sounds like the generator engaging to stop ware at low speeds.
this the first time That I can
see the up and bottom brake
mount on the disc located
behind the gearbox ！
the stop motion device ！
❤❤❤❤❤
Xin chào các bạn, mình đang sinh sống tại Việt Nam, chúc các bạn nhiều hạnh phúc! 👍🏽🔔
Nice video
Wow cool! Danke!
Good my friend
What's the ratio on that gearbox?
Based on the input and output spinning in the same direction it is a 2-stage; the small blade rotor diameter and the small generator it is likely 1:60-1:80 at the highest.
Awesome 👍
Poco espacio para moverse entre todos los ejes q giran, no hay margen de error para hechar mocos
Windturbines in Zieko
Hello. The address of the manufacturer that manufactures this type of giant fans with clean energy. Thanks.
now thats a pillow block :o
🌇🌨️🌨️
0:41 回転が同一方向だ😁
Beautiful
I am the Innovator of THE NEW WAY TO TRANSFORM ENERGY WITH MYū UCRÓS ELECTRIC CYCLE SYSTEM of the Republic of Colombia South America Carlos Ucrós WhatsApp +57 3012358709
ua-cam.com/video/5QQ4NWpbQYc/v-deo.html
ua-cam.com/video/JZ8cprmbdA0/v-deo.html
www.ucrosenergysystem.com
Soy el Innovador de LA NUEVA FORMA DE TRANSFORMAR LA ENERGIA CON MI SISTEMA CICLO ELECTRICO UCRÓS de la Republica de Colombia Sur America Carlos Ucrós WhatsApp +57 3012358709
ua-cam.com/video/5QQ4NWpbQYc/v-deo.html
ua-cam.com/video/JZ8cprmbdA0/v-deo.html
www.ucrosenergysystem.com
show nota 1000🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷
Muito interessante tirou minha dúvida.
It’s got disc brakes...
Needs red calipers and a BREMBO sticker 😃
It's only a parking brake. The blades are the brake
Magnificent
Good video.i like!!!!
Break mechanism of wind turbine
Niedlich :D
Охренимэ. Можно видео на свой канал взять ?
Wind turbine's work system is fold of the movement.
pretty cool!
nice video
Nice
pralatan yang bagus👍
Arid Windmill Farming
ein Traum....
ปฐมบทโมทนาครับ
lade mal bitte wieder videos hoch
Muito bom
ALTER NORDEX OHHHHH
oh word
Oooo
Waw✅
that gearing tho
Wind turbine
cüs digga
leben verändert
Bosko
Que tonterias,subit ariba tantas cosas !!Un fiasco de engeneria !No voi a hablar de poco que produce ,comparativo con el precio !Una .....!!!!Pagas por ella el precio por 20-30 anos de consumo en aval mas el impuesto de productor de energia cada mes !!Buen bisnis para Los que lo vende !
Yea nooorrrrdddddeeexxxxxxx *-*
And just about the time it reaches payback, it needs a major overhaul💸
BS. Our Enercon paid itself after 7 years and now running more than 25 years, no overhaul.
Windkraftanlage (WKA) mit Getriebe? Unsinn!
Wind turbine with a gearbox?
Stupid idea!
@ With a (Lagerwey) direct drive windturbine
Over engineered piece of crap meant to break and maintain Just because the horizontal axis worked on old wooden wind mills won't necessarily work on modern ones High speed rotating components ,breaking system all those moving parts mean lots of maintenance and work The worst of all is the gearbox
very silly running a turbine up that fast while still in the nacelle .. u should be sacked
As long as the wind speed isn't above safe limits, it's perfectly OK to be up there. Once the wind exceeds a certain speed, then, OSHA will not allow occupancy of the nacelle. That wind speed varies from site to site, so I can't give you an actual wind speed. (usually 30 MPH or less)
A night mare.. landscape killers...
Same as the old Powerplants...
but much more pollution
Come on.....They're BEAUTIFUL!! #Big fan of the big fans
beautiful view