How to Replace Throttle Body 2008-2013 Nissan Rogue
Вставка
- Опубліковано 26 кві 2023
- Buy Now!
New Throttle Body Assembly from 1AAuto.com 1aau.to/ib/HTTBA00007
This video shows you how to install a throttle body on your 2008-2013 Nissan Rogue. Rough idle, poor performance, and a check engine light are all signs of throttle body problems. If a thorough cleaning didn’t resolve the issues, you may need to replace the assembly.
This process should be similar on the following vehicles:
2008 Nissan Rogue
2009 Nissan Rogue
2010 Nissan Rogue
2011 Nissan Rogue
2012 Nissan Rogue
2013 Nissan Rogue
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obfE/1AXAA00013
• 10mm Socket 1aau.to/oa4f/1AXAA00017
• 13mm Socket 1aau.to/obmU/1AXAA00015
• 8mm Socket 1aau.to/oa4f/1AXAA00017
• Trim Tool Set 1aau.to/o7f/1AXXX00006
• Needle nose pliers 1aau.to/oBV/1AXAA00051
• Needle nose pliers 1aau.to/oBV/1AXAA00052
• Pliers
• Gloves 1aau.to/oUP/1AXSS00048
• Marker / Writing Utensil
• Safety Glasses 1aau.to/oM6/1AXAA00343
• 5mm Hex Socket
• Drain Pan 1aau.to/oxN/1AXAA00320
• Funnel 1aau.to/ohB/1AXAA00310
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Авто та транспорт
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Can you do this without removing the airbox or draining the coolant?
Any specific reason why the air box, the battery and battery stand was removed.
There is absolutely no rise to drain the coolant remove the battery tray and half the stuff he did to remove and clean the throttle body🤦
Thanks for the video! Do you have one that shows cleaning the Throttle Body on this same vehicle?
does the 2010 have air control valve? I can't find the location of it?