i like that you put all the footage together in one video, there is a reason most channels eventually move on from a bunch of 5 minute videos to doing feature lenght episodes, great to see you skipped that and are straight into the big league 👍
That was a great video Dave,your a hard working person with no delusions of grandeur just a champion in my eyes love your channel it should be growing cheers mate from Australia
13:09 as i know you should have a bushing each side of the perch, the sway bar link work up and down. You certainly have a squished lower bushing,or it's missing,that's why it's out of thread. The axle oil seems to be mixed with water,it will damage bearings and gears. Those dodge are nice,i would have one for sure if i lived in your country.
0:45 lol I like how you just casually mention a frame replacement as though that's a normal everyday repair job and not the single most difficult thing you could to do a truck. Those must be worth a lot of money up there. Love the Ford wheels.
Love this. Identical (except the manual) to the truck my dad said he had before he sold it to pay for the hospital bills when my sister born. He might have actually had it still today!
2/12/24..so (almost) Happy Mardi Gras Dave on this Monday b4 our annual crazyness🎉, glad to see you retro front end disc brakes, steering box & other fundamentals for driving in your cold climate. You do a lot of hard work & make it look easy. You, Andrew & Jesse Muller, you guys make complicated equipment interworkings look do-able thus encourage we viewers to go ahead & 'tackle' our various issues...mechanical or otherwise...It's great to see you (& above mentioned) make things work right! Humm...have you ever thought about politics?..hey, you can bring a few 🛠 hammers with you for those 'meetings', aye?💪⚙️🍺🍜😊
@15:37 instead of painting them spray them and your whole underbody with fluid film or a wax based protectant, when u paint stuff in the rust belt it actually makes it worse and in no time that painted surface will just flake off with rust
Being a new viewer, I think you could use an over head crane the length of your garage and or a lift for getting under the vehicles. Anyway great video.
One of my first times really working on a vehicle was changing a wheel bearing and ball joints with a buddy on his 05 ram 2500. It was not easy haha. Learned a lot from working on the truck (it always needed something ).
I was gonna say, andrew would be drooling to get a hold of the truck(too replace his), if nothing else give him a chance, if/when u decide to send it down the road ?! Plus cody and blue would LOVE❤ to ride in confort !!😂
Yeah so he can keep destroying these hard to find trucks now makes alot sense... sell to someone responsible not him I wouldn't even if I was hurting for money truck made it 23 years and he'll kill it within a year
@28:34 Dave please tell me you have another jack stand that I can’t see and not relying on that floor jack to support that side! I’ve seen those jacks fail and I don’t want you getting crushed we’re no one can help you! Please use jack stands or some kind of sturdy cribbing to support vehicle you get under, your a good man don’t want to see you injured my guy
Was it just me or was that awful looking gear oil? It was gear oil wasn't it? Ha Ha. I don't think I would own a dodge but this vintage is still pretty cool. The old 12Valve! I've always liked that sound.
Probably should of done the wheel bearings you went through all that and put the used ones back in i wouldnt ever especially anyways dodges front wheel bearings dont last at one bit lol but to each is own if you like doing the same thing often
@@Dumpster_Dave autozone sells cheap ones for like 180 and can also get bearings for them from oriellys and install new ones in the hub or they sell entire hub for 200 a side not sure if you tried them but napa tends to cost a little more and I think personally oriellys parts are comparable and sometimes can get things for like f550s that day where napa cant
This truck is about 95% rust free now with the hard work all done re fixing brakes and steering. Why not go the other 5% and cover the remaining rust covered bolts and parts with some kind of rust proofing ? Then spray ALL of the undercarriage with RustChek or something else that will protect it!
What moron designed the brake rotors the way that you have to smack out and press in the studs everytime?? Rotors are a wear part just like the pads and could easily be made to slip over the studs from the outside... Always a joy to watch you getting things done, thx a lot! 👍👍👍
What a real shame is in these trucks they are solid all around except the cheap plastic dash boards. I think the pre 98' models were better, but so many with cracked trash dash boards and really no way to fix them right. Junk Yards have already been gone through and they do not make them new any longer. I think there are some after market dash covers, built when the heater cores fail the dash boards break like crazy changing out a heater core or evaporator core. I wanted to buy another 1997 like the Ram I had and all of them I checked out had destroyed dash boards so I went with GM.
@@Dumpster_Dave hope you are able to fix it you might get lucky and find a dash if not maybe there is an after market salution available. It is a real sore spot for those wanting to restore these old Rams.
My wife was watching this video with me. I said it needs axle joints, ball joints, and wheel bearings. She asked “How can you tell that from here?” I said it’s a Dodge, they always need them- end of story.
@@Dumpster_Dave dave, we'r just teasing u ! Andrew likes those kinda dodges.... and u have one ! Plus we know yall are friends.. nice truck, u still have the newer one too right ?
96 Dodges need new frames and cabs, meanwhile I'm on the original everything in my 96 Toyota, needs nothing. Chrysler / dodge are just terrible products.
Awesome truck. Don’t let Andrew anywhere near that
Andrew be bouncing it off trees
Not with his chainsaw .anyway !!
😂
It might break for no reason
😂😂😂
Nothing like watching someone working hard while I'm sitting drinking a beer. LOL
Drinking a Beer and smoking an Alec Bradley Cigar right Now! Yahoo
Still in my humble opinion the best looking truck Dodge ever made !
The more I look at these the more I like them. And that 12v is going to last forever
i like that you put all the footage together in one video, there is a reason most channels eventually move on from a bunch of 5 minute videos to doing feature lenght episodes, great to see you skipped that and are straight into the big league 👍
Congrads you just saved yourself 90,000. buying used instead of a new truck
And if the same guy who did the frame and cab swap looked after the wiper motor wiring, then you know it was all done right. Sorta.
Reminds me of our Government $84 Trillion in debt! And they issue our credit scores??? Yeppers they sure do!
That was a great video Dave,your a hard working person with no delusions of grandeur just a champion in my eyes love your channel it should be growing cheers mate from Australia
Thanks
Yes i will second that jeffery
That engine still sounds solid.
I didn't know doing brakes on a larger truck was such a chore! Lots more to consider compared to a car or small truck haha
That year of dodge is a pain in the balls. I can do a set of brakes and rotors on my ford supper duty in about an hour
10:47 the move with the magnet is a very good idea
Ah yes the reminder to me that I hated doing bearings/hubs on rusty dodges in NY 😂
13:09 as i know you should have a bushing each side of the perch, the sway bar link work up and down.
You certainly have a squished lower bushing,or it's missing,that's why it's out of thread.
The axle oil seems to be mixed with water,it will damage bearings and gears.
Those dodge are nice,i would have one for sure if i lived in your country.
I’m not a dodge guy but I would love a nice clean 12v manual like that…
Been anxiously waiting for your return, brother! Thanks for the video and congratulations on the truck. I can’t wait to see videos on your new shop.
Thanks, I’ve been crazy busy with dumpsters but already started filming the next one.
They also make death wobbel kits specifically for those trucks worth googling and reading about it. Just mentioning it.
0:45 lol I like how you just casually mention a frame replacement as though that's a normal everyday repair job and not the single most difficult thing you could to do a truck. Those must be worth a lot of money up there. Love the Ford wheels.
Funny you noticed the wheels, those are off a 1997 f350
Love this. Identical (except the manual) to the truck my dad said he had before he sold it to pay for the hospital bills when my sister born. He might have actually had it still today!
2/12/24..so (almost) Happy Mardi Gras Dave on this Monday b4 our annual crazyness🎉, glad to see you retro front end disc brakes, steering box & other fundamentals for driving in your cold climate. You do a lot of hard work & make it look easy. You, Andrew & Jesse Muller, you guys make complicated equipment interworkings look do-able thus encourage we viewers to go ahead & 'tackle' our various issues...mechanical or otherwise...It's great to see you (& above mentioned) make things work right! Humm...have you ever thought about politics?..hey, you can bring a few 🛠 hammers with you for those 'meetings', aye?💪⚙️🍺🍜😊
someone did a nice polish rebuild on it, i see theres some components where only one side was painted. that front dif fluid looked good to.
Yeah, I would not say it was a restoration project, rust free parts, though
@15:37 instead of painting them spray them and your whole underbody with fluid film or a wax based protectant, when u paint stuff in the rust belt it actually makes it worse and in no time that painted surface will just flake off with rust
DAVE??? Where you been brother?? More vids of your awesome skills 😁🤙🏼💯🙌 like seeing your diversity of content 🤙🏼😎
Thanks, I’m filming the next video now
@@Dumpster_Dave thanks again 🤙🏼💯
Those trucks are everywhere where I live they are amazing they must have done something right if they're still around!
The motors run forever,
Interesting trick to get the front hub to release.
Being a new viewer, I think you could use an over head crane the length of your garage and or a lift for getting under the vehicles. Anyway great video.
One of my first times really working on a vehicle was changing a wheel bearing and ball joints with a buddy on his 05 ram 2500. It was not easy haha. Learned a lot from working on the truck (it always needed something ).
Your new pickup has some nice chunky tyres on it. Nice one, all the best from England .Ps, nice camera work by the way.
Great video of hard work for a reward.
Painting those wheels was a crime
The clearcoat was all peeled off
Hunter Bidens Laptop is a crime!!
@16:12 the snap of success … don’t you just love that sound?!!
I was gonna say, andrew would be drooling to get a hold of the truck(too replace his), if nothing else give him a chance, if/when u decide to send it down the road ?! Plus cody and blue would LOVE❤ to ride in confort !!😂
Yeah so he can keep destroying these hard to find trucks now makes alot sense... sell to someone responsible not him I wouldn't even if I was hurting for money truck made it 23 years and he'll kill it within a year
Found your channel a few days ago, and I just love it! Subscribed!!
@28:34 Dave please tell me you have another jack stand that I can’t see and not relying on that floor jack to support that side! I’ve seen those jacks fail and I don’t want you getting crushed we’re no one can help you! Please use jack stands or some kind of sturdy cribbing to support vehicle you get under, your a good man don’t want to see you injured my guy
Shop 101.
Great video. Don’t leave the truck around Andrew he might take it from you .haha.
Clean truck, good call buying it back
Thank you for sharing , always a pleasure watch your project, I learn a lot 👍👍👍👍
Thanks
Nice truck. I want one
Thanks, it always starts right up
That workshop is crying out for a two-post lift.
Or maybe a couple more jack stands?
Did you know some dealers would put newspaper under the valve cover to quiet it down. I guess you kind of figured out how long I been turning wrenches
That’s crazy
Was it just me or was that awful looking gear oil? It was gear oil wasn't it? Ha Ha.
I don't think I would own a dodge but this vintage is still pretty cool. The old 12Valve! I've always liked that sound.
Looked like Water mixed with oil 😅
Ducha a great job !
Dave, might have to retire that Dewalt impact and get a Milwaukee.
I had a 1994 12V and 2006 24V Cummins 2500. I really regret selling my 12V in 2021. I guess I'll just settle for my 2006 24V Cummins 2500.
Nothing like a 12 valve, but the 4 door is nice on the 2006
That still a cool looking truck I like 👍
Nice truck...eat your heart out Andrew !!
Nice looking truck
Probably should of done the wheel bearings you went through all that and put the used ones back in i wouldnt ever especially anyways dodges front wheel bearings dont last at one bit lol but to each is own if you like doing the same thing often
I called for a price on new ones and they were $450 a piece.
@@Dumpster_Dave autozone sells cheap ones for like 180 and can also get bearings for them from oriellys and install new ones in the hub or they sell entire hub for 200 a side not sure if you tried them but napa tends to cost a little more and I think personally oriellys parts are comparable and sometimes can get things for like f550s that day where napa cant
Andrew may have a bumper for that beauty shortly- his Ram is looking rough!
It might fit
Sweet truck! Use some of the UA-cam money to get Milwaukee tools though lol Milwaukee impact would’ve taken those hub bolts right out!
1" impact set to perfect torque setting. Some things I get it, but the wheel bearing isn't the place to skip it.
I think the torque setting is 175 ft pounds on those.
Love the content man! Keep it up!
Andrew’s gassing up the chainsaw
Fun video...keep them coming.
Passed by you over in Greenport by Alvarez homes
Cool,
That is a nice truck. Will be a great work truck. Those 2nd gens do fantastic off road for some reason. Do you still have the newer 2500?
I sold it
@@Dumpster_Dave I don’t blame you. New trucks are built to cheap Oh yeah….did the actuator fix the 4x4?
Good job! Did you change the front diff fluid that was getting milky?
This truck is about 95% rust free now with the hard work all done re fixing brakes and steering. Why not go the other 5% and cover the remaining rust covered bolts and parts with some kind of rust proofing ? Then spray ALL of the undercarriage with RustChek or something else that will protect it!
I think I’m going to have that fluid film down, it’s $300 to have it done
What moron designed the brake rotors the way that you have to smack out and press in the studs everytime??
Rotors are a wear part just like the pads and could easily be made to slip over the studs from the outside...
Always a joy to watch you getting things done, thx a lot!
👍👍👍
Not a good design
Hi Dave
Its Super Cool Video
Women, Equipment, Trucks
Rode hard, Left dripping.
Dave's not here. Sorry.... You didn't need the chainsaw? Well,you didn't do it right. Good job. Keep on trucking.
Nice :)
What a real shame is in these trucks they are solid all around except the cheap plastic dash boards. I think the pre 98' models were better, but so many with cracked trash dash boards and really no way to fix them right. Junk Yards have already been gone through and they do not make them new any longer. I think there are some after market dash covers, built when the heater cores fail the dash boards break like crazy changing out a heater core or evaporator core. I wanted to buy another 1997 like the Ram I had and all of them I checked out had destroyed dash boards so I went with GM.
The dash is junk
@@Dumpster_Dave hope you are able to fix it you might get lucky and find a dash if not maybe there is an after market salution available. It is a real sore spot for those wanting to restore these old Rams.
👍👍
My wife was watching this video with me. I said it needs axle joints, ball joints, and wheel bearings. She asked “How can you tell that from here?” I said it’s a Dodge, they always need them- end of story.
Lol
Har har har
Love it beutiful truck
Thanks
I need part #2 the actuator work?
Yes sorry I didn’t put that in there, I just bought some after parts for the truck so I will be doing another video
painting those aluminum rims is a sin.
Yeah, but the careful masking job made up for it.
your bent tie rod looks interesting.
I think that’s factory
Only thing it needs is a set of eBay nerf bars…
Bro that gear oil in the front axle needs to be changed…
Yeah it does
Billy Clinton changed Bill Gates gear oil on Epstein Maxwell Island! Yes Sir he did that!!!
Are those 17 inch Hummer wheels?
1997 f350 wheels
Great truck!!! Buttt whyyy paint those wheels 🤮
Things could be worse? He could Sniff them like Joe Bidens administration??? Yeppers
Эмульсия в заднем мосту, масло срочно под замену.
Did the 4wD work?
Yeah
Joe Bidens 4 wheel drive is stuck in Obama's Rear axle? Yeppers
I don't think the lube in the front gear box should be that color.
Lube is many colors Ky jelly
Dave, where are your jackstands, safety 1st
They’re with the wiper motor wiring.
The real question is.... does andrew know u "have this truck"(b4 u posted this video)?? Lol
Yeah he likes it
@@Dumpster_Dave dave, we'r just teasing u ! Andrew likes those kinda dodges.... and u have one ! Plus we know yall are friends.. nice truck, u still have the newer one too right ?
Hey man eyes. You only get 2
That's what Bill Clinton said to Monica Lewinsky left eye??? Yeppers he did warn her!
Is Andrew your brother?
Brother from another mother
Postmaster is his Daddy! Yahoo
That dash ain't a 2001 it's a 98 dash
That’s true I should have mentioned that
You ever heard of penetrating fluid?
No But Obama says that to Michael every night before bed!!! Yeppers he does
96 Dodges need new frames and cabs, meanwhile I'm on the original everything in my 96 Toyota, needs nothing. Chrysler / dodge are just terrible products.
I wonder what lubrication spec/ grade the front axle oil had 🤔 Fresh water or salt water ? 🤔🫣😂
I can’t believe this truck I just saw to loosen the wheel bearing. I spent hours using a sledge hammer to pull mine out last time 🥲