Wooden square making - only hand tools
Вставка
- Опубліковано 20 лип 2023
- Hand tool woodworking. I used walnut and maple, finishing tung oil with carnauba wax, glue up - fish glue. I noticed a long time ago that if you buy a square in a store that costs less than 100$, then its accuracy plunges me into sadness. Therefore, for many years I have been making squares for myself, and they don’t wear out, more often they just get bored and I want something new, now I needed a square a little more than my smallest and a little less than a large square. I ask you to pay your attention to the fact that when you glue both parts of the square, please do not use PVA glue, as it remains elastic after drying and the seam will always be movable. Therefore, I recommend gluing the squares only with solid glue, and this is Bone glue, fish glue, or polyurethane glue. And, I almost forgot, you can also use the red Titetbond original, it is also hard and not elastic after drying.
Thanks to those who support me and my channel on paypal PayPal : romyrwood@gmail.com
Thanks for watching, Regards Yurii🤗🇺🇦
For a wonderful hammer made of titanium and stainless steel, as well as a planer knife made of titanium and incredible steel, many thanks to Luke from Zen Woo Tools - zenwutoolworks.com/products/
The music in the video is taken from Epidemic sound share.epidemicsound.com/0aywse - Навчання та стиль
story of my life - need a square to make a square...
nice work, brother!
I love that movie, one of my top 5 favorite movies ever. And very cool video thanks for showing
Thank you for another beautiful video. Your lighting, editing and music selection are only surpased by your fine woodworking.
I enjoy making my own tools too, so rewarding. I created a small square and let the tail of the square protrude a little further out the back of the "handle" which was cut at 1:6 for dove tails. and the other end at 45 degrees. these are so useful when making boxes and similar items.
I agree. I made a try square also last week. Love spending time in my shop making.
That's a real nice idea man. Thanks for sharing.
Could you provide a picture of your square?
Единственный канал, на котором я не ставлю скорость воспроизведения х1.5😅 всегда очень приятно и интересно наблюдать за работой мастера 👍
Well done ! Such a simple tools needs great care to be efficient, and you did it ! Inspiring…
And the "whistle" of your Clifton… a music by itself !
patience - that is the word that comes to mind after seeing a few of your videos - impressive - thank you
Вот это я и называю работа для души. Респект.
Спасибо 😉
Another work of art. After a long day I fell asleep to the amazing sound track. And had to rewatch❤
Your videos are very inspiring for me. One day I hope to have a tenth of your ability. Great videos. Great music!!
Coolest Dad ever! 🙂
Pretty to watch
Приятная вещица😊👍
Another toy in the toolbox;) this video is what I need before bed, thank you!
Как всегда шикарно
Спасибо:)
Stunning work, Yurii! Really beautiful square!!! 😃
Stay safe there with your family! 🖖😊
You've just made me realize that making my own square is a very good challenge to push my woodworking craft further. I've recently made my own marking gauge with osage orange and I was looking for another small scale, high precision project. Yours is a superb piece of woodworking. I hope I can get close to your end-product!
❤❤❤
I love your work, i just wish you would include some basic measurements for some of us newbies. But great work!
As a woodworker, I can appreciate the level of detail and precision that went into this.
Beautiful project!! 👍
Great vid, awesome square, but that shirt, is outta this world.
Красивая работа 👍
Спасибо 😉
I’ll tell you man, I can sit and watch & learn from you all day long. I have made metal working tools most of my career. As a retired guy, I would love to make precision tools like what you did here. I would love to watch you make wooden hand planes. Your work is beautiful & brilliant! Thank you so much for sharing…
Beautiful. I don't know why I've never thought about making a square for myself.
Perfection as always!! Nice job man!
Wasn't expecting a wooden set square to be that good, but your work is amazing, really great.
Beautiful!
Lovely tool build! I have been working on my mortises the hard part I find is keeping the back walls flat when paring . That Clifton plane is a beauty :)
Beautiful woodworking skill! This video is so relax to watch!
Masha Allah your work is amazing
Very nice work!
Fantastisch - wunderschöner Winkel und tolles Video 🙏
Beautifully done. It's the joy in the journey that counts!!
absolutely gorgeous
Very nice. You’ve inspired me to make one.
Such a simple thing, beautifully done. Thank you, for showing us how.
This is are antistress therapy 👍
Nice job thanks for sharing.
So beautyful!!
Handsome little square he is ,I’ve made two little squares for making little boxes and look beautiful,very hand and fun to make from scraps 😊
Wow! An impressive work as always. So ralaxing to see how it's made, and so inspiring too!!! Thanks for share what you do 💪 Greetings from Argentina.
Another beautiful piece sir as it's in the tradition of the masters. Thank you.
Your work always impress 👍👍
Beautiful video... compliment!!!
Perfeito! 👏
Amazing work
Very nice!
good job. it's in my todo list
Juste un mot : magnifique ❤
beautiful
Excelente trabajo, te felicito
Fabulous 😊
Деревянный измерительный инструмент, конечно спорное решение, но максимально эстетичное ❤
Que maravilla. Gracias por el video.
Magnífico trabalho, parabéns.!
Very nice.
Love your work, I would like to make a larger one for panel projects. You have given me inspiration.
❤
Very beautiful
Thank you so much ☺️
Buen trabajo 👏👏👏 🇵🇪
Precisão, belo trabalho.
Muito bom
Super and meditative 😁
Absolute Meisterleistung
Дякую за відео 👍.
Та вам дякую 🙏
La perfection à l’état pur
Les grands esprits se rencontrent, j’ai eu l’idée de m’en faire une aussi. Mais je crois que je vais en jeter quelques une avant d’atteindre ton résultat
Bravo
Muito capricho e bom gosto. Ótimo trabalho. Parabéns.❤
You can also use basic geometry to create the 90 degree angle, instead of needing a square to build a square.
Good good gooood
Очень красиво работаешь! После того как посмотрел это видео, тоже такой сделал пошёл 😊
Спасибо:) Я долго не решался, думаю как без циркулярки то сделать)) ну оказалось не так сложно!)
O come on mate I thought you were making a tea 🍵 or something
Nice job
Absolutely excellent channel you have created here. Great work, great projects and wonderful style. Without any words, but with a lot of enthusiasm and dedication. I hope you can continue your work during the horrible war in your country and that you and your family remain unharmed. All the best 👌 By the way, what kind of grease or fat do you use for your planes bottom side?
very goos sir🥰🥰
The only thing I didn’t like is that you used a manufactured square to set your original squareness. But as you showed, true squareness can be determined by marking a line and then flipping the square and marking another line. I wish that was the only method u used to establish squareness, but I also understand the difficulty that comes with it when a glue up is involved. Maybe I’ll make a vid taking that enormous challenge :)
Love this build, where can I find the glue double boiler? I need one for hide glue and such.
Perfection is not for everyone
Quanto tempo, realmente, precisou para fazer ester esquadro?
Nice! I just made one myself out of maple last week. What brand of Marking gauge is that if you don't mind me asking? Looks like it possibly has micro adjustment if my eyes didn't lie to me.
The marking gauge was used incorrectly - the bevelled side of the blade needs to be on the waste wood.
This is very nicely made though. It will be great to use with a pencil, and will be accurate until there is a change in humidity!
So will wood movement take it out of square over time? Thank you
Would You recommend securing the joint with perpendicular dowels or brass rods?
I need to make one of these too! Did you fine tune the inside edge of the darker wood to be square too? If so, how?
It seems that he fined tune the inside edge during the glue up, you take that for reference before clamping because this edge would be hard to touch up later while you can easily planethe outside edge later if needed.
Were do you get fish glue from
And I can buy one of these how?!
What kind of oil do you use please ? Thks
Tung oil with carnauba wax
@@gr_woodworking and you mix it yourself ?
@regispetitjean2473 It was ready, and now I mix it myself
What kind of glue is being used there?
Fish glue
Was ist das für Kleber, der da heiß gemacht wird?
Наши аглицкие "друзья " вы немного опоздали. Всё это было в Советском Союзе. Особенно этот угольник в каждой школе на уроках труда. Пока вы к нам не засунули свой массивно-объёмный нос.
Вот так отстали от лидера по производству деревянных угольников)))) не угнаться теперь уж🤣 «друг»
Аглицкий "друг" вы опоздали а не отстали?) Чуешь разницу? Смикить.
@@gr_woodworking хорошо смеётся тот кто смеётся последним. Простых истин не знаешь. В Библии сказано не мечите бисер перед свиньями не поймут.
African Padauk?
Пособие "Как заебаться если у тебя только две дощечки и набор стамесок" 😂
Да это же кайф, посидеть, повозиться в гараже)) да под музыку и чаек
@@gr_woodworking Конечно это кайф! Владеть ремеслом, прикасаться к дереву, резать его ручным инструментом это как медитация. Автору спасибо за видео!
Wait.... doesn't he need to use a Festool Domino to qualify as a UA-cam woodworker? This must be fake.
Isn’t it nice to see someone with talent, not using every power tool known to man.
Call yourself a craftsman and you put your plane down like that? 😂
Potresti mettere anche le misure e il tipo di legno che usa? Grazie e complimenti 👍👏
Secondo me sono noce 200x45x6mm e acero 150x45x18... O giù di lì