We put a brushless system in this cheap toy Maserati.
Вставка
- Опубліковано 8 чер 2024
- Have you ever wondered why more people don't upgrade Toy grade RC cars? Me too. In this episode on 10th Scale Garage, we stick a brushless system in this cheap toy RC Maserati MC20 that we got from Amazon. How much faster is it? Will it survive our speed runs? Find out all this and more.
Support the channel at 10thscalegarage.com
Get your RC cleaning and maintance at COWRC.com - Авто та транспорт
This was awsome guys. I love seeing something other than the same ol same ol, sponsored rc content where the same car is reviewed by 50 different youtubers. I love when you guys do shenanigans. You could put the body on a hobby grade chassis and make it even better. Or, if you wanted to keep the chassis and continue to work on it to get the bugs worked out, you could try using epoxy to fill the screw holes, tap it with a drill bit to make a pilot hole, and rescrew it with self tapping screws. Ive done that before and it works. And the beauty is, you can do it repeatedly. Whatever you guys decide to do, ill be watching for sure. Keep up the awsome contents guys. 👊 (oh, and the P-Diddy comment made me lol and wake up my wife.)😂
Modifying toy grade RCs to perform better is something I enjoy doing. I actually bought the same one as you, but haven’t modified it yet. I have a number of videos of my modified RCs if interested. Your video at least shows me how it looks inside. Thanks
Nice experiment. I'd salvage the body and put it on an actual hobby grade RC👍🏾👊🏾✌🏾
Great vid. I love upgrading radio shack cars. Good job!!!
Not all bad ideas are actually bad... This one was, but you learned haha... I had a pretty good chuckle when the car ran away, and then again when Ethan was on the ground lol
Glue the tires on and put in a better radio. This RC deserves a second chance!
Maybe a GT2 version.
Yes I am interested in all such products, thankss
Look at Ethan run!!! Get that dude a beer lol 🤣
I love you guys, what a great, fun channel!
By all means you should put that body on another rc of some sort, can't wait to see it!
Thanks so much!
I’d watch both options.. chassis swap, or the old lipo and shoot it. Both good viewing options.
I have a similar toy RC car I got on eBay that was a Ferrari F50 GT. I replaced everything inside with using the electronics from an Eachine Brushless buggy. 3D printed some shock mounts and used FMS oil-filled shocks. I put a Yokomo gyro and it is fun to drift in parking lots. The hard part was finding tires to glue onto the rims. I ended up 3d printing a tire spacer to fill in the gap as the inner part of the tires was too big of a diameter. I use a cheap 160-dollar Ender 3 Neo 3D printer which is a must for these projects.
F50 is one of my favorite cars of all time.
Love the trailer girl! 😂
Diddy, LMAO!! They say he who pitches catches. lol
😂😂 heck yeah, do whatever it takes ❤that pdiddi jab 😂
I always see the "New Bright" rc bodies on ebay and I wonder if people ever get them to work on something. Cool idea! Thanks!
Yes, we use the New Bright bodies on crawlers and drift cars. It's been done for a long time now. I have a New Bright F150 Raptor body on my Traxxas Trx4. They are pretty heavy and only good for trail trucks.
I had one back in the day…. It was a Colorado hard body that I put on a crawler.
Would be pretty cool to see a chassis swap although it would take a ton of work to make it look correct. I’d love to see it if you guys try it out. I swapped in a 550 brushed motor/esc into an old 1/10 toysrus Barbie corvette and was crazy overpowered lol. Even added servo to turn the steering wheel inside. Was a fun project but stopped messing with it after I realized how poor it handled not having any suspension and hard rubber tires that spun on the wheels just like yours. Though if you did a chassis swap it’ll probably make me want to get mine going again
What they need is a 3D printer. I did a build just like this. Having a 3D printer to make parts is a must. My 3D printer only cost 160 dollars. I use an inexpensive Ender 3 Neo 3D printer. Use a free CAD program that has built-in AI and it will help you design the parts with minimum effort.
We have multiple 3D printers.
Chassis swap would be cool, but is it really worth the headaches?
We enjoy this building/ modifying process, so maybe….. this one frustrated us though.
A tiny brushed Typhon . Not dumn enough ? Good looking car but yeah , 5 mins & one gets bored. Need some 10 scale Jamm !
6 mph is 9,6 KM/H.
Blistering speed
Do it , anyway it's a laugh
F DIDDY