piston and rings installation

Поділитися
Вставка
  • Опубліковано 11 гру 2024

КОМЕНТАРІ • 81

  • @IMKhan-ze4zm
    @IMKhan-ze4zm Рік тому +1

    excellent work 👍

  • @spaceview_1
    @spaceview_1 Рік тому +1

    very good teach

  • @emmanuelcritical2103
    @emmanuelcritical2103 2 роки тому +1

    Good evening

  • @rob5598
    @rob5598 Рік тому

    0:31 cool hammer😎👍

  • @sabiuusmankarmami9550
    @sabiuusmankarmami9550 9 місяців тому +1

    Nice job

  • @hervewanonkou
    @hervewanonkou Рік тому +1

    good

  • @UsiokhaleGodspower
    @UsiokhaleGodspower 2 місяці тому +1

    What if i go through all this process you taught us...and the gen is still breaking our smoke what should be the next step to take sir

    • @jaywealthmechanics9285
      @jaywealthmechanics9285  2 місяці тому

      It can never bring out smoke after going through this process. It can only bring smoke if there is oil inside the exhaust or you use inferior parts.

  • @johnusuyak2307
    @johnusuyak2307 2 роки тому +1

    Good job

  • @noelfaithfulkari2857
    @noelfaithfulkari2857 2 роки тому +1

    Nice

  • @steveemem
    @steveemem Рік тому +1

    I appreciate what you did. But, I don't even know how to lose my way to where the rings are. Can you do a video on that? A step by step guide on how to repair a smoky generator. Mine is pansun.

  • @1flyjcLIB1drone
    @1flyjcLIB1drone Рік тому +1

    It would be nice if you showed how you got to the piston.

  • @GodwinOsadolor-q3v
    @GodwinOsadolor-q3v 5 місяців тому +1

    If the rings is not fixed directly opposite ,will the generator start , when the rings are fixed upside down will it start

  • @Etete-jn5mm
    @Etete-jn5mm Рік тому +1

    Thanks, but those the position really matters?

  • @adeleyeayodeji1032
    @adeleyeayodeji1032 Рік тому +1

    Good job,if any of the springs meeting gap is wrongly set what can be effect on the generator

  • @oseniolamilekan1914
    @oseniolamilekan1914 2 роки тому +1

    I really appreciate this channel but I have a problem thtI changed the from oil seat and the generator is still splitting oil I don't no where the problem is from pls kindly give me an idea

    • @jaywealthmechanics9285
      @jaywealthmechanics9285  2 роки тому

      If the engine oil is over gauge, there will be excess splitting of oil from the valve side. Check the oil gauge

  • @harrisonspennoh5161
    @harrisonspennoh5161 Рік тому +1

    The name of the rings is 170 or what

  • @nicholasabiola4722
    @nicholasabiola4722 2 роки тому

    U did not explain or show us where the expanded rings will face at d top of the arrow on the piston.the expanded rings is it facing up or down.

  • @franklinodozie5329
    @franklinodozie5329 Рік тому +1

    Please can the expander ring face the direction of the exhaust ?

  • @FikimenaNewsam-gx5jz
    @FikimenaNewsam-gx5jz Рік тому +1

    Sir, if I fixed new piston and rings and it's a little bit stiff could that make the generator refused to start?

  • @muhammadshettima42
    @muhammadshettima42 2 роки тому +2

    Pls which brand of piston rings is best in Nigeria thanks

  • @MuhammadWaseem-wd4nu
    @MuhammadWaseem-wd4nu 2 роки тому +1

    Help ring basic purpose?

  • @FrankKamkondo-rr4fs
    @FrankKamkondo-rr4fs Рік тому +1

    Sir
    What can happen if all ring are positioned in one direction?

  • @nicholasabiola4722
    @nicholasabiola4722 2 роки тому +2

    Please rewatch the video and see dat all d rings faces d same place dat is not clock ringing u did ..pls rewatch ..by checking where u place the pressure rings.

    • @jaywealthmechanics9285
      @jaywealthmechanics9285  2 роки тому

      They are place differently.. kindly rewatch and subscribe

    • @nicholasabiola4722
      @nicholasabiola4722 2 роки тому

      @@jaywealthmechanics9285 pls I believe clock ringing is opposite opposite.but ur is NOT Rewatch and make corrections.U did not show the position of the oil rings faces very for people to see clearly.

    • @ramzyify
      @ramzyify Рік тому

      You are right sir,the way he fixed the piston rings is wrong

  • @georgejerry5797
    @georgejerry5797 2 роки тому +1

    Please how can I fix a connecting rod to a new pistol without the engine making noise

    • @jaywealthmechanics9285
      @jaywealthmechanics9285  2 роки тому

      You will have to shorten the connecting rod to stop the engine from making noise . I will post the video soon

  • @FranciscoGonji
    @FranciscoGonji 4 місяці тому

    O meu gerador a gasolina está AST10000E está cria ar ,como resolver

  • @DukeofOwo
    @DukeofOwo 4 місяці тому

    What Can make a generator that I just changed the ring not work, sir?

    • @jaywealthmechanics9285
      @jaywealthmechanics9285  4 місяці тому +1

      Shortage of oil and smoking

    • @DukeofOwo
      @DukeofOwo 4 місяці тому +1

      @@jaywealthmechanics9285 The oil isn't short and I made sure the cam shaft timing was in sync with the shaft timing. I also changed the valve

    • @jaywealthmechanics9285
      @jaywealthmechanics9285  4 місяці тому

      @@DukeofOwo okay… what is now the issue with your generator.

    • @DukeofOwo
      @DukeofOwo 4 місяці тому +1

      @@jaywealthmechanics9285 anytime I try to switch it on, it sounds like it's about to start, releases some bubbles from the carburator and doesn't come on

    • @jaywealthmechanics9285
      @jaywealthmechanics9285  4 місяці тому

      @@DukeofOwo ground or change the valve

  • @samuelakhaba3460
    @samuelakhaba3460 2 роки тому +1

    Hello, so if the block is bad, what do I do??

  • @timothy6177
    @timothy6177 Рік тому +1

    Which piston is good to buy for generator

  • @timothy6177
    @timothy6177 2 роки тому

    Please how can you know a good shaft thank you

    • @jaywealthmechanics9285
      @jaywealthmechanics9285  2 роки тому +1

      You will know a good shaft by
      Firstly: the sound of the generator when is on
      Secondly: you know when you loose the engine. the place where the connection rod lap. The extreme end and the middle is equal in shape.

  • @nicholasabiola4722
    @nicholasabiola4722 2 роки тому +1

    I still remains on my points dat what u did here is wrong....where u place the first oil ring is d same place u put the pressure ring....and u said is clock ringing.i believe d pressure ring sure go to d other side of the first oil ring not d way u are doing urs.and u did not show us how u placed the Oil scarper.may be is facing up or facing down of d Arrow.

  • @agyeienock9747
    @agyeienock9747 2 роки тому +1

    Pls where can I get some of the rings to buy

  • @nicholasabiola4722
    @nicholasabiola4722 2 роки тому

    U are teaching in the wrong direction of the rings.what u teach here is not clock ringing.why should first ring and first pressure ring we face each other.it is not possible sir.

  • @mujeebrahmanrahman7970
    @mujeebrahmanrahman7970 Рік тому +1

    Nice