Furitek Perentie Motor and Lizard 1/10 in the Axial Bronco!
Вставка
- Опубліковано 7 лис 2024
- Checking out the new Furitek Perentie motor with the Lizard Ten esc. Picked up the Axial Bronco 10iii for this one and couldn’t be happier with the setup! Check it out!
Furitek Perentie motor found here
furitek.com/pr...
Furitek Lizard Ten esc found here
bit.ly/3rfrhBt
Axial Early Bronco 10iii available here
bit.ly/3Q9vDnJ
Reefs raw 500 servo available here
bit.ly/3rke2jb
HELP SUPPORT the channel by clicking my affiliate links below to amainhobbies or amazon and then shopping at no extra cost to you!
Thanks for any help!
AFFILIATE LINKS BELOW
Horizon Hobby affiliate link
bit.ly/3eXihxY
Amainhobbies affiliate link
bit.ly/3CcTUCN
FMS Affiliate link here
www.fmshobby.c...
Amazon affiliate link
amzn.to/3aY2lK7
RCAWD affiliate link here
rcawd.com/?ref...
Use 2fmrc discount code at FMS and get a $10 discount when the order amount is over $50 on new trucks and accessories!
Fcx24 Front Portal axles found here
shrsl.com/3ma33
FCX24 Rear Portal Axles found here
shrsl.com/3ma3h
Metal portal gears found here!
shrsl.com/3lnmv
FCX24 $6 Motor upgrade found here
www.ebay.com/i...
Extended links for the fcx24 found here
Link kit available here
www.ebay.com/i...
Contact me at 2fastmattracing@gmail.com
Purchase PARTS for the Fcx24 or rtr and help support the channel here!
shrsl.com/3la45
FCX24 Portal Gears included in this set
shrsl.com/3la70
FCX24 at amainhobbies here!!!
bit.ly/3yoLwRL
Fcx24 on amazon here!
amzn.to/3nDSCfb
High clearance links used found here
amzn.to/3NfOJaj
RC4WD Stamped steel Wheels used found here
bit.ly/3ntbRbc
RC4WD Scramblers found here
bit.ly/3FT3GgA
Other upgrades found here
Injora brass wheel rings found here
amzn.to/3zVGWM1
Wheel hex extenders used found here
amzn.to/3Oh8FLy
Stock Scx24 driveshaft (long) used for rear
amzn.to/3ndGhOk
FMS FCX24 available here in yellow
amzn.to/39OSMwU
FMS FCX24 available here in blue
amzn.to/3HHAHgJ
FMS FCX24 available here in red
amzn.to/3Oyjvwd
Don’t forget to use the DISCOUNT CODES BELOW
Furitek discount code is 2fmrc
Injora Discount code is 2fmrc05 for 5% off
MofoRC discount code is 2fmrc
Fullsendrc discount code is 2fmrc
RcAWD discount code is 2fmrcawd5 for 5% off
TOOLS I USE FOUND HERE
T-handle wheel wrench I use here
bit.ly/3qst079
WORK MAT I USE FOUND HERE
amzn.to/39gcXUb
MIP .050 hex found here
bit.ly/3xOvi45
MY FAVORITE TIRES BELOW
Injora Crawl Master
www.injora.com...
Power Hobby Trail Warriors found here
www.powerhobby...
Rc4wd Scramblers
bit.ly/3FT3GgA
MY FAVORITE ELECTRONICS BELOW
My favorite SERVO for the price (agfrc)
amzn.to/3xJbb7r
Another great BUDGET servo here (Emax)
bit.ly/2SjZXUx
My favorite ESC found here
bit.ly/39jhrtc
My favorite BRUSHLESS motor here
bit.ly/3MIMEU3
My favorite BRUSHED motor here
www.ebay.com/i...
SHOCKS I USE BELOW
FRONT SHOCKS
Injora internal spring shocks (40mm) running on the gray Injora body truck found here
amzn.to/3LR4yDH
amzn.to/3Qgszri
REAR SHOCKS I usually use some sort of long travel shock like these
bit.ly/33j9kde
MY FAVORITE WHEELS BELOW
Treal 1.0 22.4g beadlocks found here (select your color)
amzn.to/3OdTimH
Injora 1.0 wheels found here
amzn.to/3aS4zL5
Hard Park Crawlers 1.0 wheels
hardparkrc.com...
BRASS PARTS I USE BELOW
Treal Brass Steering Knuckles found here
amzn.to/3MYMQit
Injora brass wheel rings
amzn.to/3xom4Kp
Injora brass kit including steering links!
amzn.to/3MKOKmr
Cheap Brass Kit with all parts I change found here
amzn.to/3zGoOW6
HIGH CLEARANCE LINKS HERE
Injora links (select your length)
amzn.to/3zsUTkm
STEERING LINKS HERE
Injora Aluminum Steering links here
amzn.to/39hOzlb
~-~~-~~~-~~-~
Please watch: "Injora Lights for SCX6! Super Bright & CHEAP!"
• Injora Lights for SCX6...
~-~~-~~~-~~-~
This is me right here buddy, this is what we do all the time. Awesome place you have there to go crawling super cool. Hope to see more of your early bronco I’ll be here watching for it
Great save
Beautiful spot my friend 🤩👏
Yeah that was nice, that drivers wheel hooked up drove right up love it
+1 on the deep woods 👍👍 That’s what I run on my 10.iii Gladiator & they hook up lovely, but you already know that.. 😏
Little road rash at the end. Great showing off! Super location!
You’re going to love it buddy I’ve been driving mine for a year now I love it
I’ve only had it out the one time but absolutely love it! Really cool to hear you love yours after a year. I’ll definitely be posting more of it! Thanks for watching and the comments. Hope you have a great weekend ahead!
Yeah buddy my favorite trail rig, I got the teal color one my favorite Rig’s now I got it when it first came out the stock servo just went out over this past weekend. Only thing I have changed is switched the shocks down to 90 mm performs a lot better lemonades the torque twist mostly, oh and I put my wheels and tires on running KLR/M’s On my voodoo rims
Love it Hope we see some more videos of a bronc love it catch on the next one
That was nice driving Matt, Chancey but it was awesome Yep still here
Yeah buddy I’m still here Matt, I have the Vanquish pro and I Been driving my early bronco more it’s become my favorite
what a freakin spot!! the intro pan shot makes me wanna go out and crawl... ok ill go out after this vid I promise
It’s a great spot for testing. It never changes so you can make a few changes to your truck and go back a wk or so later and hit the exact same line. I love this spot
That's a great spot! I grew up down the road near Park City. Been to Nolin dozens of times.
Nice! It’s definitely one of my favorite areas to crawl. Only about 25 or so mins from me also.
I'm new to 10 scale so maybe I'm just ignorant, but I can't believe how loud it is. Part of the reason I went brushless in my SCX24 was to get rid of or at least minimize the wine of the motor. This setup is pretty loud still.
I just picked up a this same bronco and was starting to look at brushless motors for it. I figured furiTek is #1 in 24s wanted to check out their 10 stuff
Yeah that’s just 1/10 metal gears. The motor and esc is pretty silent. I really like this setup but if you’re not really planning to go over a 3s battery definitely check out the Hobbywing Fusion as well. Great price,all in one motor/esc that can’t really be beat on smoothness.
bit.ly/3VHs8sb
@@2fmrc the hobby wing was my first choice. I think 3s will be plenty. At least for a long time. Thanks
@@2fmrc just bought the hobbywing and reef 500 through your affiliate llinks.
Thanks for all the good videos.
I'm sure the furitek is good. It's just hard to stand out with so many ppl already loyal to their favorite brands, along with the fact that the 1/10th market has several proven options already owned by many. It was a home run with the 24th scale stuff cuzz there wasn't and still isn't many other options . Plus we had 2fmrc reviewing that ish with much praise. 👍👍
Man I love to try this for my 1/10! So curious to try it!
I've been stoked on Furitek coming to the 1/10 scale since I saw your first video on it Matt. However how do they think they can be in the game with a non waterproof system? That'd be a major let down. I'd stay with Hobby Wing for the price if they don't waterproof that ESC. I don't mind spending the money if the product is good. Waterproofing is absolutely important in 1/10 let alone crawling in general, at least for me here in Pennsylvania.
Thanks again for the great information and review as always Matt. Keep up the great work brother. RUBBER SIDE DOWN
Cant go wrong with reefs 500. Best servo ive ever used hands down. The 299 is great for bashing too I have one in my Tekno mt410. Ive been eyeing this new esc from Furitek. Teen wolf looks cool in the bronco
If you haven’t added it, the reefs swaybar helps out with a ton of stuff as far as keeping the front wheels down when climbing.
Nice! I haven’t added it but I’ll check into that for sure. I appreciate it
You put you some voodoo KLR/M’s on there you’ll never take them off yes they are that good, I talked with the flubber stuffers at the great lakes gauntlet couple weeks ago you sure would have a blast there but he’s making the slime balls for the 1.9 tires yeah he seen my bronco and the tires he knows I’ll be getting a set as soon as available
Yeah I seen they were working on some 1/10 flubberz. I have 3D printed foams in these. I print my own 1/10 foams but I’d love to try out the flubberz when he gets them rolling!
Nice driving man! Got the slow and the go 1/10 style. Furitek puts some good stuff together for sure...
I gotta tenth scale trx4 just need to fix that thing up. The front portals are all jacked up
Fix that thing man!!! Tons of fun!
You new Bronco looking great out there at that location. The Furitek system seems to work pretty good. Thanks for the review of it.
Is it cogging? May just be sound coming through cause it doesn’t look like it but sounds like it in some cases
No cogging. Just sounds like it a little because this is a sensorless setup with the FOC doing the work so it kinda sounds like it now and then but it’s never noticeable in the driving like a lot of systems.
@@2fmrc good deal! Stuck between this motor or the furi outrunner. Be going in a capra so outrunner may snag some wires. Idk yet 🤣 still doing some research
Great video man, much love from the end of it haha.
The Bronco is awesome but loving the furitek system, I hope they make a waterproof vision!
Im also curious about the outrunner motor, are you going to be testing that one as well?
Love the Furitek gear.. how warm does that esc get considering the size?
I didn’t notice any heat with it honestly. I only ran 3s in this truck but I’ve been running 4s on it in another truck with no issues. The one on 4s does have the fan mounted on it but only because it came with it and I didn’t remove it. I could feel some warmth on the heat sink of this one but never hot at all.
Man you're killin me!!!
The wifey is goin to make me unsubscribe from you're channel lol, first for real tho keep up the great content.
All cause of your channel I purchased the Rampart, pre-order cayman, fcx24, and tons of upgrades for all of my rigs. And now this I been keeping up on the furitek channel I been waiting very IMPATIENTLY for the 1/10 furitek stuff.
Love the video can't wait to get one
Haha! I love it man. Just don’t give her my full name. Hate to have her put a hit on me for all your purchases 😆
The Early Bronco is one of my favorite trail trucks. And it is super capable on the rocks! I added a Reefs Anti-sway bar, which significantly increased the traction and reduced that torque twist.
Think you could wedge that motor into an SCX24?
Worth a shot! Lol
Great looking rig! And what a beautiful crawl spot.
how much does the bronco weigh
Man I have been oogling that Bronco since they first came out 👀 I could watch that thing crawl all day! Interested in the Furitek 10th scale stuff, Have you run the fusion pro? If so, how does it compare?
I'm kinda new to 1/10 do you think that would fit with a capra I know they don't have alot of room mine does have the Vader flat skid this may have a little more juice then what I need mine came with a hobby wing 1080 with a crawlmaster 13t motor which is great but sometimes it seems it could be smoother crawling maybe I need to get the program card and mess with it I didn't get that with the truck
It should definitely fit in a Capra. I’ve forced the 550 can Hobbywing Fusion in the Capra before so this 540 can should fit pretty easily. Especially with the Vader skid!
@@2fmrc awesome thank you might be the system I go with I run the lizard pro on 2 scx24 trucks and love it so I figured the 1/10 stuff must be good
How'd you think that would work in a Ryft? not looking for max wheel speed but some low speed aswell
Don't forget to put a snorkel on it if you plan to ford very deep with it. JK. I have been looking at that model myself. A little too expensive to get into RTR form for me at this time though. The shocks seem very good. It looked so composed. My 1/24 gets body chatter in some of those situations with the shocks I have.
Hi, Trying to order some furitek ESC. The discount code is not working. Do you have an updated discount code. 🙂
Great video. Been thinking about one of these Broncos since they first debuted. Really like the old school Broncos, the new ones, not so much... Hope to see more details on this rig in future videos. In particular, I'm curious about the speed with this motor/ESC combo with the Axial two speed. I'm more interested in this one as more of a scale trail truck rather than strictly as a crawler.
Love that early Bronco! Thanks for showing us yours! Good insights on the whole rig/motor & esc as usual! I'm hoping to get one for Christmas this year. How much overdrive did you go with? Looks like it's all working well together.
Rub some dirt on that sexy white chicken leg! Great running video in a really cool looking place. And that Bronco couldn't have been set up better for a serious trail truck there. Needs a winch, lights and restraints for Teenwolf...next video 1/10 scaling of the Bronco. Just saying. Enjoy what you do for us, thank you.
I think it’s a little bit too steep for a newer brand coming out to be asking for that much money I got a wait a while to her dollars a lot of money
Yeah it’ll be hard for them to jump in the 1/10 game but they’ve did well with 1/24s. Not a lot of competition at that scale though.
Also _hee hee hee, 'dongle'._