Very many thanks! I have repaired my washing machine by replacing the door lock plug with terminals I had on hand saving me from buying a replacement machine.
Good info on the fault and how to get the door lock out, but your blue crimp connections aren't much good, especially the last one where you squeezed the sides of the connectors with the pliers instead of top and bottom. If anyone else sees this video, use a proper crimping tool, they don't cost much more than the part does and it's much safer!
My Idecit gives the code F06 and the door no longer opens. Centrifuging or draining does not help. Unplugged it (5 minutes), no effect either. If the door remains closed, is the door lock not burned or may it still need to be replaced?
Hi there. If the door is locked, how you open it in the first place?!! In order to do all that to fix it?!! Thanks. My neighbors machine has that problem but we cannot open the door to take the clothes out...
All lights flashing when it goes on spin Door WILL open and close ...when i turn it off I still have the **red light lock showing ** Error shows F06. Is it still a broken door? Its OK until it goes on spin (INDESIT )
Hi. I think it will be a faulty door lock . It's still working but the red light shows you it needs replacement as the resistor in it is not in good condition.
Hi Can you help me please? When I power on my washing machine it cut off the house power .So I don't know if it is the door fault or mains filter. What could be the problem?
Hi i have an indesit ewe91482w and the lock symbol has lit up and everything has stopped working, i have had no fault codes so... i changed the hinge and the lock but i didnt mark the wires first like a fool and now ive put it all back together and its doing the same thing no different, the lock was black from a burn too but its still wont start? it just keeps blinking the lock symbol please help
Try to run the washing machine without any clothes in it and soonest it starts try to open the door. If you can open them it means the door lock is burnt out and needs replacement
Thanks for the instructions, you absolute legend. Ordered spare part from Amazon, installed in 15 minutes.
Thank a lot for your support!! You actually saved my machine!!!! Step by step.., thx!
Very many thanks! I have repaired my washing machine by replacing the door lock plug with terminals I had on hand saving me from buying a replacement machine.
My washing machine is now working after following your video. Thank you very much :-)
Brilliant stuff 👍 you just saved me buying a new washing machine, now works perfectly, many many thanks!
That was exactly my laundry. Thank you for your help
Well I'm book marking this your a legend mines just gone to ffs but gonna get a spare part thank you so much for this 🙏
Nice one, just waiting for the post .
Useful guide. Just followed it and replaced the burnt out locking mechanism on my Hotpoint WMBF 742. Thanks
I’m glad you found this video helpful 👍
Yes! It worked for me, thank you 👍🇬🇧😷
Good info on the fault and how to get the door lock out, but your blue crimp connections aren't much good, especially the last one where you squeezed the sides of the connectors with the pliers instead of top and bottom. If anyone else sees this video, use a proper crimping tool, they don't cost much more than the part does and it's much safer!
تسلم...تحياتى لكم
#الجرجاوى_جراح_الغسالات_الاتوماتيك
thankyou so much followed what you said now perfect can wash again i was sending it to scrap man so many many thanks
Thanks for sharing. Saved some ££👍🙏
I understood your video better than some English fella. And I’m English 😄thank you
Brilliant 👍
Just about to try this 👍🇬🇧😷
Thank you! Very good
Thank you
What are the blue plugs called? Could you please share the link?
Thanks a lot !
Could u plz tell me what is the exact name of the lock as I don’t wanna buy wrong one? Thanks
Where can i get this door lock for my Indesit XWSE71283
👍
My Idecit gives the code F06 and the door no longer opens. Centrifuging or draining does not help. Unplugged it (5 minutes), no effect either. If the door remains closed, is the door lock not burned or may it still need to be replaced?
Sorry also the door lock for Indesit? Please could you share the link?
Mine dosent open from down dosent have the tab to pull
Hi there. If the door is locked, how you open it in the first place?!! In order to do all that to fix it?!!
Thanks.
My neighbors machine has that problem but we cannot open the door to take the clothes out...
Push it from inside. Just brake the old lock
@@letsfixit782 thanks for the reply.... getting the piece to fix it soon.
Good job 💪🏽
I have same issue but i can't open the door so how to do it?
Po ściągnięciu górnej pokrywy odłączyć kable podłączone do tego zamka i pociągnąć go .
To nie uszkodzi drzwi a pozwoli je otworzyć.
Pozdrawiam
My washing machine is showing F12 what does that mean? With flashing lights Help
All lights flashing when it goes on spin Door WILL open and close ...when i turn it off I still have the **red light lock showing **
Error shows F06. Is it still a broken door? Its OK until it goes on spin (INDESIT )
Hi. I think it will be a faulty door lock .
It's still working but the red light shows you it needs replacement as the resistor in it is not in good condition.
Please can you help with hisense washing machine f-06 error
Hi
Can you help me please? When I power on my washing machine it cut off the house power .So I don't know if it is the door fault or mains filter. What could be the problem?
Hello, what washer do you have? It could be electrically dangerous.
Can you help me f06 error on hotpoint washing machine PLEASE. The problem I think is not the door because we can open the door.
If it doesn't turn on it.means the door lock is gone and needs replacement. If you still can wash them it will need replacement soon
Hi i have an indesit ewe91482w and the lock symbol has lit up and everything has stopped working, i have had no fault codes so... i changed the hinge and the lock but i didnt mark the wires first like a fool and now ive put it all back together and its doing the same thing no different, the lock was black from a burn too but its still wont start? it just keeps blinking the lock symbol please help
Hi. Change the wires and that will work.
Hi, what’s the name of the plug? I can’t find it on screw fix
Hi.
INSULATED CRIMP BLUE FEMALE PUSH-ON 6.3MM PACK OF 100 (68327)
The number in bracket is the part number
@@letsfixit782 Thank you
Hi.....my Hotpoint if flashing F06 but I CAN open and close the door? HELP
the same its happening to me .. did you fix it already?
Yep me too
Try to run the washing machine without any clothes in it and soonest it starts try to open the door. If you can open them it means the door lock is burnt out and needs replacement
@@letsfixit782 thanks
@@letsfixit782 you know if it’s burnt out the machine is recalled? It could be very dangerous but if you replaced it with a new one that’s fine
Bende bundan kullanıyorum Türkçe anlatımı yokmu ya
по русскому кто искал лайк
Helped a lot.
It's not this, i do it, buy new lock but nothing change f06 still insist 😮💨🤣
Замок пазорно здох !!!