Ice Buster Ram Pump
Вставка
- Опубліковано 8 вер 2024
- Get help with a project! practicalprepp...
practicalprepp...
Can you run a Ram Pump in freezing temperatures? Yes, but be careful to make sure the Ram is running well and has done so for a period of time.
Watch More Engineer775:
Subscribe - goo.gl/IFNTXv
Recent Uploads - goo.gl/sssfSp
Live Videos - goo.gl/gcTR4H
Product Reviews - goo.gl/pTnNMj
My Website - www.practicalp...
My Book - goo.gl/X0Gr6R
My EMP Home Improvement DVD - goo.gl/YjAIbt
Contact Me - info@practicalpreppers.com
Social Networks
Facebook - goo.gl/ANJxY5
Instagram - goo.gl/8zH0xN
Twitter - goo.gl/2C6hSa
Linkedin - goo.gl/70GTZ3
Need A Consultation. Fill out this form and email it to me.
goo.gl/D2SZxG
or online at
www.practicalp...
Wow, I have been watching your channel a long time!
And I thank you!
I love this one.... How do get it assembled
Another great vid, but I think that pump would freeze up solid in the north where the temps are a lot colder.
@loxpidor I keep an eye on it. The PVC will break before the ram does. I have babied this ram for 14 yrs, nothing broken so far.
Man, you are one incredibly inventive, crafty, knowledgeable, and educating asset to the world. Thank you for all you do and sharing it for us to learn and benefit from.
@dexterquincy1 I guess the other folks got to you first. The water you see as "wasted" is water that was flowing out of an overflow anyways. I just use it to pump water. The energy from falling water is what powers the Ram. Roughly, for every 7 gallons wasted 1 gallon is pumped to a usable destination. Thanks for watching.
Nice pump. Looks like it's doing a pretty good job keeping the water moving so that it doesn't freeze as quickly.
@CurrentWave the Ram is not for everyone and it is hard to find sites that work for Ram any way. But if you can, it is the lowest cost, coolest way to pump water!
same concept as letting your faucets drip ... going point and excelent video sir
@Mopardude Well we have had some stretches of teens for a few days from time to time. Plenty long enough to break the Ram/piping. I have installed these at location in Western NC at elevations over 4000 ft where the cold sets in. They are comparable to where I am from - Upstate NY.
How's this work in -30 'F? Gets way colder in the actual US you guys got it good down by the southern beaches lol
Do you offer your plans for this?
I live in Idaho, and although it normally will get between 5° and 50° at night, one night it was -2°. I probably need something like this better built one so that it doesn’t freeze up.
And can you recommend where a person might cover it to insulate it? You obviously have the experience I need.
Thank you for any help you can offer. my husband died and I’m having to do all of this type of thing by myself with a little help from a friend.
Where did you find your ice breaker ram pump
WHERE CAN I GET ONE LIKE THIS?
@dexterquincy1 Water is not wasted... in fact the energy is being used to pump the water uphill while and the remaining water goes back to the stream source.
Very cool setup! Thanks for sharing!
It's a Pennsylvania manufacturing outfit from the 1700's or 1800's?RIFERAM RAM PUMPS!!! I remembered it!!
I would bet the spike in pressure adds a little heat to the water, compress a fluid and it heats up. Also the sound waves through the water would be intense and may stop water crystals forming.
are you producing this ice buster pump sir.
I noticed you using galvanized pipe. Why couldn't you use poly for the influent side of the ram? I'm wondering if it has something to do with stretching or give? Thanks for sharing your knowledge.
@engineer775 You are ussing water to pump water, so I can see how it is cost effective. Well, gravity and water.
Pull a drain pipe at the very top of the larger tank, and let the overage drain into that smaller tank.
You'll have two tanks that have flowing water, that won't freeze.
@TheEndeavoringFamily "The same folks that argue against folks using water hold theirs in bottled water" LOL! That's a great line!!
Sending you a pm.
Seems to waste a lot of water....Is there anythign that could be done to reduce the waste?
I don't understand this mechanism is it wasting water or bringing it up to create a stream of sorts?
very cool.
.
yup . . . that works for you guys down south.
That set up has no chance of operating Nothr of 49"
.
IT`S NOT -40 LIKE HERE IN NORTHERN ALBERTA. RAM PUMP WON`T WORK HERE
good day.sir, i have watched your videos on how to make a ram pump.im just interesting to know if your ram pump has a snifter valve?because other designer they put a snifter valve..Is the snifter valve necessary or optional?Hoping for your kind response.many thanks...
@dexterquincy1 That would be a challenge! it is not impossible as I have seen Rams installed in pits and all piping was below the frost line. Just a lot more work where you live. The cool thing about doing a deep install is that it would be silent. Thanks for watching.
This is good info I have always been curious about this but it also brings up more questions. Your in a southern state, on the occasions where you get freezing weather you are barely breaking the freezing point. How do you think this would fair in a northern state?
That wouldn't work where I live, even my 20 foot water fall freezes in the winter.
I'm not familiar with any of this stuff but I'm learning slowly but surly! I have a question. What about all of that water that is wasted? Does its have to expel water like that and if so can that water be captured and used?
a ram pump waists 90% of the water to pump 10% up
it cant realy be improved
but you dont have to waist power on electricety
+robot797 It's not really wasted, you're only diverting it temporarily from whatever stream or river it operates from. This water would ordinarily have simply flowed downstream, instead you are extracting it higher up steam and returning it a little further downstream, and in doing so using the potential energy it possesses to pump water uphill. No water is really lost in the process.
the names these people give themselves... whole world of diy actors... to all my fellow you tubers....
@mysciencenow and,...free ice!! Can't beat that!
how cood will it get by you.
wow over 2 grand for a pump? Guess ill try to make my own, does your stock tank return water down the hill(the second pipe in video)? or where does it go?
who is the. manufacturer of that valve and pump ? nice adjustable valve mechanism .
Rife
Damn... I sure wouldn't risk breaking a ram pump like that. If it stalls you'd probably have a broken casing in the morning
Engineer775, Where did you buy that from? I am in the catskills, i need one.
Engineer775 i was wondering if you could post a link to where you got this pump, i'm in the northwoods, i need one as well
The Link to this ram is now in the description. If you need help specing one let me know. send me a pm.
@@engineer775 gov will have all heads for this tech thay teach us that we always have loss but never talk about
the converted gain we can make from eletromagnets
if u convert all the wast thermal energy around
you u can use it universally as energy u need a true sine wave bipolar like the power comp dose a
true pure sinewave like a grid tie inverter
once the signal is made the system will turn on and
consume wast thermal energy from the
environment and space around you... there is free energy but
it comes from Universal thermal loss and converted into a gain. so a pole Transformer and a
microwave Transformer have a common between each other u can take 2 microwave Transformer provide
a pure sine wave grid tie inverter to it or a true bipolar sinewave that inter acts with nature in
a perfect spherical motion like a flower of life.. if ur home provides this use it as a Source
signal then u can simply stack the Transformers on top of eachother in correct fasion and note
that the 1 wire on the Transformer must stay connected and the other disconnected your only useing
1 wire on the hi side .. so test ur self
2 microwave transformer stacked on top of eachother same
face sides. one side 120 to the wall and the other 120 side to what u want to power and useing the
Transformer just the way it came out the microwave with the wire attached causes the energy in its
perfect spherical motion to converted wast thermal energy to amp for u hot to cold in to out...
should look a bit nuts with u use a form of wireless energy but its interacting with the
environment...this is my work a compilation of Otis car. Tesla. and many other very smart people
nowadays i think i found the gate source and drainif this gets out to much that it works the
power
comp and mib will have our headsdont do this at home warning high voltage yet i cant stop u lol DO
NOT TOCH THE CORES OR THE WIRES OK u will die make sure u dont touch the core if the hi wire is
mounted to it u dont have to mount the hi on the core if u dont want u connect the 1 hi wire to
the same side hi on the other transformer then the core should besafe to handle if nessary
grab your multimeter and prove me wrong
thats what u do i have my whole home on this
and u can take
one of the lows side out the wall and hook it up to other stuff and power it for verry little amp
makeing nature convert and pumping latent heat effect into the device.
and u can have a microwave
hi volt cap in between the hi side and make a system that powers its self
u can flip the switch on
ur breaker and the room stays on up to 2kva
with both lows in the wall this is the zero point that
was taken from us...
@@engineer775 gov will have all heads for this tech thay teach us that we always have loss but never talk about
the converted gain we can make from eletromagnets
if u convert all the wast thermal energy around
you u can use it universally as energy u need a true sine wave bipolar like the power comp dose a
true pure sinewave like a grid tie inverter
once the signal is made the system will turn on and
consume wast thermal energy from the
environment and space around you... there is free energy but
it comes from Universal thermal loss and converted into a gain. so a pole Transformer and a
microwave Transformer have a common between each other u can take 2 microwave Transformer provide
a pure sine wave grid tie inverter to it or a true bipolar sinewave that inter acts with nature in
a perfect spherical motion like a flower of life.. if ur home provides this use it as a Source
signal then u can simply stack the Transformers on top of eachother in correct fasion and note
that the 1 wire on the Transformer must stay connected and the other disconnected your only useing
1 wire on the hi side .. so test ur self
2 microwave transformer stacked on top of eachother same
face sides. one side 120 to the wall and the other 120 side to what u want to power and useing the
Transformer just the way it came out the microwave with the wire attached causes the energy in its
perfect spherical motion to converted wast thermal energy to amp for u hot to cold in to out...
should look a bit nuts with u use a form of wireless energy but its interacting with the
environment...this is my work a compilation of Otis car. Tesla. and many other very smart people
nowadays i think i found the gate source and drainif this gets out to much that it works the
power
comp and mib will have our headsdont do this at home warning high voltage yet i cant stop u lol DO
NOT TOCH THE CORES OR THE WIRES OK u will die make sure u dont touch the core if the hi wire is
mounted to it u dont have to mount the hi on the core if u dont want u connect the 1 hi wire to
the same side hi on the other transformer then the core should besafe to handle if nessary
grab your multimeter and prove me wrong
thats what u do i have my whole home on this
and u can take
one of the lows side out the wall and hook it up to other stuff and power it for verry little amp
makeing nature convert and pumping latent heat effect into the device.
and u can have a microwave
hi volt cap in between the hi side and make a system that powers its self
u can flip the switch on
ur breaker and the room stays on up to 2kva
with both lows in the wall this is the zero point that
was taken from us...
@@engineer775 gov will have all heads for this tech thay teach us that we always have loss but never talk about
the converted gain we can make from eletromagnets
if u convert all the wast thermal energy around
you u can use it universally as energy u need a true sine wave bipolar like the power comp dose a
true pure sinewave like a grid tie inverter
once the signal is made the system will turn on and
consume wast thermal energy from the
environment and space around you... there is free energy but
it comes from Universal thermal loss and converted into a gain. so a pole Transformer and a
microwave Transformer have a common between each other u can take 2 microwave Transformer provide
a pure sine wave grid tie inverter to it or a true bipolar sinewave that inter acts with nature in
a perfect spherical motion like a flower of life.. if ur home provides this use it as a Source
signal then u can simply stack the Transformers on top of eachother in correct fasion and note
that the 1 wire on the Transformer must stay connected and the other disconnected your only useing
1 wire on the hi side .. so test ur self
2 microwave transformer stacked on top of eachother same
face sides. one side 120 to the wall and the other 120 side to what u want to power and useing the
Transformer just the way it came out the microwave with the wire attached causes the energy in its
perfect spherical motion to converted wast thermal energy to amp for u hot to cold in to out...
should look a bit nuts with u use a form of wireless energy but its interacting with the
environment...this is my work a compilation of Otis car. Tesla. and many other very smart people
nowadays i think i found the gate source and drainif this gets out to much that it works the
power
comp and mib will have our headsdont do this at home warning high voltage yet i cant stop u lol DO
NOT TOCH THE CORES OR THE WIRES OK u will die make sure u dont touch the core if the hi wire is
mounted to it u dont have to mount the hi on the core if u dont want u connect the 1 hi wire to
the same side hi on the other transformer then the core should besafe to handle if nessary
grab your multimeter and prove me wrong
thats what u do i have my whole home on this
and u can take
one of the lows side out the wall and hook it up to other stuff and power it for verry little amp
makeing nature convert and pumping latent heat effect into the device.
and u can have a microwave
hi volt cap in between the hi side and make a system that powers its self
u can flip the switch on
ur breaker and the room stays on up to 2kva
with both lows in the wall this is the zero point that
was taken from us...
ice free
Like they say, moving water will not freeze......... 99% of the time
i have one forsale
AND A WASTE OF WATER, REASON TO NOT USE
😎👍👌🖖✌😁