Nice very nice I had to get rid of my rarebreed trigger freaking aft over stepping their bounds but I did get the rise armament 535 trigger that's an awesome trigger.
BA bcg and barrel were free so why not run them till they fail? This is obviously just a range toy(hints the frt-15). I don't keep track but thousands of rounds later and still running strong with no issues. 🤷
Now that has to be one of the best Gucci/Workhorse builds I've seen. All parts flow cohesively!! Best of both worlds in the fit and function department brother! Not only did he get some gucci parts. He didnt skimp out on the parts that mattered the most. Well done!!!
Thanks man!!! You definitely hit it on the head with "Gucci/workhorse" cause it's Gucci but I run the shi* out of it! There's another video on my page of me firing it and some other builds you might light on my IG page @mattgore34. Thanks for the kinds man! 💯🤘🇺🇸
Brother! I have some news for you my friend. Spoke to an SLR rep earlier. He informed me in about 9 days time. They will be releasing new style recievers sets. He did mentioned that they will be non-ambi but a new style!!! If you had another build in mind. You might wanna hold off and see what they're gonna look like. Thought you might appreciate this intel!
did you have any problems with your buffer not fully screwing into your law tactical? i have that same set up and the saber tube buffer doesn’t fully tighten
Yours seems to run just a little slower than mine, and closer to where I'd like mine to be. I've got basically the same buffer. Maybe it's just the difference in the gas.
@@mlgcustoms9987 A JP spring with H2 weight is what was in mine when I got it running, so I think you'll get what you're looking for. Mine belongs in one of my other lowers, so I'm ordering an H2 and an H3 buffer for a normal spring setup and maybe it'll slow down a hair for me.
Thanks man! I'm running a SLR adjustable gas block on it. I just posted some pics of it on my Instagram if you want to check it out with some of my other builds. @mattgore34
That all depends on what handguard you're using and what suppressor you're using. They all have different diameters, some suppressors will fit partially inside the handguard, some will not. Decide on what parts you're going to use and get the measurements and go from there. If you don't want the suppressor to fit inside the handguard at all then I would say get a barrel that is 1 1/2" longer than the handguard. Could probably use one that is 1" longer than the handguard but will cutting it close.
@@mlgcustoms9987 I would use the same handguard as you. I think it is an Ion handguard. Isn't your barrel and Handguard the same length? Is that trigger still legal?
@@lesgarten yes hanguard is the 12.5 ion lite and barrel is same length. The Yankee Hill Machine Resonator 2 suppressor (shown in video) is a great 30 cal. can and very affordable. It fits nice and snug just inside the handguard.
@@lesgarten I use the magpul grips a lot cause I like the rubber grip texture but the Wilson grips are decent grips. They are based off of the BCM gunfighter grip and Wilson just put their own texture design on it. I think I prefer the original BCM gunfighter grip a little more but that's just personal preference.
Sick rifle love the lines and camo
Thanks man!🤘
She’s a beauty
Thank you!
Oh cool you have an Ar like everyone esle cool story.
You're very observant, good job! 🤡
Looks good in dark settings. What it look like in natural lighting
Even better! Deadlock Coatings does amazing work!
Slick build; that receiver & rail set is dead sexy.
Thanks! Agreed! SLR makes some nice sets! I have one other set of theirs that I built a .308 out of. Pretty sick!!!🤘🇺🇸
Nice very nice I had to get rid of my rarebreed trigger freaking aft over stepping their bounds but I did get the rise armament 535 trigger that's an awesome trigger.
Thanks man! Very unfortunate about having to get rid of your trigger.
It's funny to see somebody put several thousand dollars in a AR build and put a BA bolt carrier in it.
BA bcg and barrel were free so why not run them till they fail? This is obviously just a range toy(hints the frt-15). I don't keep track but thousands of rounds later and still running strong with no issues. 🤷
Your build inspired me to replicate it and build one like this!
Sweeeeettt!!!! I love this build and how it performs!!! Hopefully you will too!!!
Drake, Hope you send me a pic of your build when it's done man. Interested to see it!🤘🇺🇸 My IG is @mattgore34
Now that has to be one of the best Gucci/Workhorse builds I've seen. All parts flow cohesively!! Best of both worlds in the fit and function department brother! Not only did he get some gucci parts. He didnt skimp out on the parts that mattered the most. Well done!!!
Thanks man!!! You definitely hit it on the head with "Gucci/workhorse" cause it's Gucci but I run the shi* out of it! There's another video on my page of me firing it and some other builds you might light on my IG page @mattgore34. Thanks for the kinds man! 💯🤘🇺🇸
Brother! I have some news for you my friend. Spoke to an SLR rep earlier. He informed me in about 9 days time. They will be releasing new style recievers sets. He did mentioned that they will be non-ambi but a new style!!! If you had another build in mind. You might wanna hold off and see what they're gonna look like. Thought you might appreciate this intel!
@@jfeliciano1172 nice!!! I will keep that in mind and check out what they drop. Thanks for the heads man!💯👊🇺🇸
That's a nice looking stock you got there.
Thanks! It's actually a pistol brace, made by Gear Head Works and buffer tube is made by Battle Arms Development. 💯🤘🇺🇸
@@mlgcustoms9987 lol man I was just kidding just an sbr joke. I know its a pistol brace.
@@A2Kaid people these days you never f#*$*$ know!!! 😂😂😂🤘
Edit: barrel length is 12.5" and gas block is a SLR adjustable .750 with carbine length gas tube.
What handguard length? 12?
Also what gas system? Carbine?
@@D870L yes sir!!! Carbine length....*edited, thanks🤘
@@D870L you could go 12"....mine is 12.5" same as my barrel.
did you have any problems with your buffer not fully screwing into your law tactical? i have that same set up and the saber tube buffer doesn’t fully tighten
No I did not have that issue.
Yours seems to run just a little slower than mine, and closer to where I'd like mine to be. I've got basically the same buffer. Maybe it's just the difference in the gas.
Yeah I was going to switch out for an H2 buffer to speed it up a little bit. Still making adjustments.
@@mlgcustoms9987 A JP spring with H2 weight is what was in mine when I got it running, so I think you'll get what you're looking for. Mine belongs in one of my other lowers, so I'm ordering an H2 and an H3 buffer for a normal spring setup and maybe it'll slow down a hair for me.
@@JuiceJive hope it works for you man! I'm going to make some adjustments to my gas block and go from there.
Did you have trouble getting that wilson grip to seat well? I have the same set up and that little tab seems fit like shit. Thank!
Yeah I had the same problem. I tightened it down good and then applied some heat to it and then tightened a bit more. It eventually seated ok.
Is it a 5.56 or a 300 Blackout?
223/556
Beautiful build broski!!! What type of gas block are you running?
Thanks man! I'm running a SLR adjustable gas block on it. I just posted some pics of it on my Instagram if you want to check it out with some of my other builds. @mattgore34
How much longer should the barrel be from the Handguards to run a Suppressor?
That all depends on what handguard you're using and what suppressor you're using. They all have different diameters, some suppressors will fit partially inside the handguard, some will not. Decide on what parts you're going to use and get the measurements and go from there. If you don't want the suppressor to fit inside the handguard at all then I would say get a barrel that is 1 1/2" longer than the handguard. Could probably use one that is 1" longer than the handguard but will cutting it close.
@@mlgcustoms9987 I would use the same handguard as you. I think it is an Ion handguard. Isn't your barrel and Handguard the same length?
Is that trigger still legal?
@@lesgarten yes hanguard is the 12.5 ion lite and barrel is same length. The Yankee Hill Machine Resonator 2 suppressor (shown in video) is a great 30 cal. can and very affordable. It fits nice and snug just inside the handguard.
@@mlgcustoms9987 How do you like the Wilson grip compared to others like Magpul?
@@lesgarten I use the magpul grips a lot cause I like the rubber grip texture but the Wilson grips are decent grips. They are based off of the BCM gunfighter grip and Wilson just put their own texture design on it. I think I prefer the original BCM gunfighter grip a little more but that's just personal preference.
What BCG?
Ballistic Advantage...shown in video
@@mlgcustoms9987 watched the video about 5 times and didn’t hear it man I apologize, beautiful rifle though! Thank you for the information!
@@mlgcustoms9987 any spring issues with your rare breed?
@@drew7587 I haven't had any so far. I've only put about 1,000 rounds through it.
@@drew7587 no worries man! Thank you!🤘💯🇺🇸