Wife listening from across the room said, “Did he just say assault the first victim? I thought that was a sawmill video”. 😂 Thanks for the video, Mark👍
Ya’ll need to put out wanted posters for ZZ Mark. That rascal. I miss him. Mark. You are your own master. You and T. H. E. Eddie Horvath make the rules. If your viewers don’t like it, that’s their problem. You have over 30 years experience cutting. No need apologize for what you do. You da man! Love the videos. Keep em coming. Thank you. 😊
I have watched all of your videos from day One, I love them all, you have taught Me Many things, I had a Wood Shop class in 7 Th Grade, We only made things on a Lathe , and table saws, I fell in love with wood, the Grains and all, But I became a believer that every piece of wood has a Purpose, no matter what it is, Some of the logs you cut the bark off and turn it over, and Certain pieces have a look that is A Wood Carvers Dream, My Best, Cousin Figel
Nice video Mark, i like that spruce - seems to mill pretty well. I was thinking oh crap when that board fell off the head block, but you handled it perfect, experience is very nice to have. Many people to not realize how fast something can go wrong and could turn out to be a very dangerous situatin. As i have mentioned before you guys are great at safety, 100%. Many times, including this video, i have heard you say, i am watching Eddie's fingers, or i need to wait til Eddie clears. That is fantastic, and like you mentioned in this video, main thing do not panic, slow down and move along. :) Thanks... guys.
Five o’clock in the morning nice boards coming out of a knotty old log ,todays job brazing up a damaged casting someone tried with an arc welder and made a mess , clean his mess up then start the repair a it’s a warms day , any way you guys have a nice day
FYI: C.F. Martin guitar co. in Nazareth Pa. uses clear grain spruce for all their instruments. They use only Pennsylvania grown , harvested and sawn blue spruce!
I used many, many rough cut 2X4s from the local sawmill in Vermont in the 1970s. And just like the rough sawn and even pit sawn wall framing I dealt with and repaired in Massachusetts, you swing a hatchet/hammer. One face drives your nails,, the other face trims the over large faces to allow drywall or plaster. Your 2X4 s are ridiculously accurate. From what I have seen here,, ya don't need the hatchet on your stock.
Hey guys. I wish I were home I would be up to help y'all. Love helping out. Be home soon. Good to see Pete is doing so good ! Stay safe and God bless. Hope ZZ gets back soon.
It is always good to see you. I do not know what it is but it is so neat to see the log being cleaned and squared. Almost had a accident; glad that you caught it.
Hope you all are doing well and are happy with your collective lives and still enjoying what you are doing. I also hope that you have an enjoyable time at the meet and greet. Due to having come down with COVID once again I have to stay home.
Your lumber is true to measurement, i.e. 2x4, 2x6, 1x12, so when someone buys this lumber or you saw to order, how much shrinkage happens after it leaves your place? A 2x4 from a lumber yard or building suppler is not ever a true 2x4. So if a builder uses your fresh lumber, how much does it differ in the end product?
Cutting 2 x 4's is getting boring. Change things up and cut some 4 x 2's every once in a while. Also that Wayne guy needs to help out if he's gonna keep hanging around!
just "LOVE" your sawing, brings back very fond memerories and I also love the work that both of you "Eddy" do and you and it "does show that you both are have ben working together for quite some time and the respect between the two/three, show to one another, "JUST" simply "GREAT" michael in pg bc. can.
It's good to see you helping Dan. I've tailed a sawmill and it's no easy task keeping up with the mill.
Good evening from Lincolnshire UK.
good evening Andrew.
Wife listening from across the room said, “Did he just say assault the first victim? I thought that was a sawmill video”. 😂 Thanks for the video, Mark👍
Ya’ll need to put out wanted posters for ZZ Mark. That rascal. I miss him.
Mark. You are your own master. You and T. H. E. Eddie Horvath make the rules. If your viewers don’t like it, that’s their problem. You have over 30 years experience cutting.
No need apologize for what you do. You da man! Love the videos. Keep em coming.
Thank you. 😊
thanks Michael , I love the wanted poster lol!
I have watched all of your videos from day One, I love them all, you have taught Me Many things, I had a Wood Shop class in 7 Th Grade, We only made things on a Lathe , and table saws, I fell in love with wood, the Grains and all, But I became a believer that every piece of wood has a Purpose, no matter what it is, Some of the logs you cut the bark off and turn it over, and Certain pieces have a look that is A Wood Carvers Dream, My Best, Cousin Figel
Nice video Mark, i like that spruce - seems to mill pretty well. I was thinking oh crap when that board fell off the head block, but you handled it perfect, experience is very nice to have. Many people to not realize how fast something can go wrong and could turn out to be a very dangerous situatin. As i have mentioned before you guys are great at safety, 100%. Many times, including this video, i have heard you say, i am watching Eddie's fingers, or i need to wait til Eddie clears. That is fantastic, and like you mentioned in this video, main thing do not panic, slow down and move along. :)
Thanks... guys.
At first I thought that dog was gonna get a haircut,way to handle that mark. Nice spruce
Good morning guys
Beautiful work this 2 x ****
Guys have a great weekend
Tony
So cool I really enjoyed this video .thanks for all your thoughts on how you break down the log .looking forward for the next video 👍👍👍
thank you.
Doggies up...Doggies out...Doggies down!
Five o’clock in the morning nice boards coming out of a knotty old log ,todays job brazing up a damaged casting someone tried with an arc welder and made a mess , clean his mess up then start the repair a it’s a warms day , any way you guys have a nice day
FYI: C.F. Martin guitar co. in Nazareth Pa. uses clear grain spruce for all their instruments. They use only Pennsylvania grown , harvested and sawn blue spruce!
Good afternoon from Utah USA
good afternoon Brad.
I used many, many rough cut 2X4s from the local sawmill in Vermont in the 1970s. And just like the rough sawn and even pit sawn wall framing I dealt with and repaired in Massachusetts, you swing a hatchet/hammer. One face drives your nails,, the other face trims the over large faces to allow drywall or plaster. Your 2X4 s are ridiculously accurate. From what I have seen here,, ya don't need the hatchet on your stock.
Give Pete my best this weekend in Corsica. It is amazing how these extra devices like your power pack help your operation
thanks Anthony , we sure will! say hi to grandpa!
I'd be proud to help Eddie if i could Mark but I'm way down here in the foothill's of North Carolina!
Hey guys. I wish I were home I would be up to help y'all. Love helping out. Be home soon. Good to see Pete is doing so good ! Stay safe and God bless. Hope ZZ gets back soon.
Good job as usual.
It is always good to see you. I do not know what it is but it is so neat to see the log being cleaned and squared. Almost had a accident; glad that you caught it.
thanks Alan , yes it could have ended badly
Was "good" to see what does go wrong. Great Video have a Great Weekend!👍👍😎😎
thank you , we show everything that happens while sawing.
Handy sez: if the women don’t find you handsome, they should at least find you handy.
Totally understand the camera safety first hate to see anybody get hurt stay safe God bless take care
thank you , yes the camera is second.
I love to see ugly wood turned into lumbar
Gr from Holland 🇳🇱
thank you , greetings Holland !
Hope you all are doing well and are happy with your collective lives and still enjoying what you are doing. I also hope that you have an enjoyable time at the meet and greet. Due to having come down with COVID once again I have to stay home.
thanks Robert , hope you get better soon.
Always an adventure!
thanks Rob , how is MR. Crosby?
Happy Friday Eve! Here's to Pete!😊👍🪓🪚✌️
thank you!
Hello from Virginia. Formerly from Economy PA (Beaver County), not that far from you.
Hello Will.
Have a great weekend from Horseheads NY
thanks Jeff.
Nice lumber!!!! ❤❤❤
thanks Karen.
Good video Bus Motor Productions
When will ZZ be back from his latest expedition?
GOD BLESS YOU ALL 🙏
BIG HUG FROM CHICAGO IL 🙌
thanks Gerard.
красиво , профессионально ,молодцы люблю смотреть ваши видео
Tuba-Fours!
for sure.
If you snooze, you loose BIG TIME when a saw is turning. Good going and a fine time this weekend for you'se guys! God Bless
thanks Lewie.
@@markgalicic7788 Yall too!
Corsica is a nice area. I miss Pa.. Stuck here in Oklahoma.
yes it is Floyd north of us.
Would it have nn better to turn the log one more time when you get to the dog board and have that square face against the knees?
Sorry, it's a long swim over to help Eddie
How thick of a piece can you send through the edger? I'll see you next video. Corsica is just a little too far for me to drive these days.
Bill
Mark how is your eye doing?
🇺🇸
Good evening from Yorkshire uk
good evening Lee.
MOST BIG BOX STORES DON'T CARE WHAT 2X4s look like-lot of knots and bark edges
very true.
Looks simple. Very much doubt it though ❤❤
Also, aren't 8" wide boards worth a few $$£ ?
Beautiful timber.
I wish I could get to Pete's benefit . I'm sure it would be a time .
yes it will be good to get together and enjoy the day .
the gnome is deep in man glitter
& Hi Mark & Eddies & it's is Randy and i like yours video is cool & Thanks & Mark Eddies & Friends Randy
thanks Randy , BOOM!
You should have flipped that last wide board 180 degrees and you wouldn’t have had that board dropped.
👍👍👍
A little bit late to the party, but now I'm here 😜
It's too bad you're so far away from me. I would get a kick out of helping you while you're sawing.
Especially when ZZ is on the run 😂😂
👍🤸♀️🤸♂️🤸
What is the kerf on your blade?
9/32"
Indonesia opah mark🇮🇩🇮🇩🙏🏻🙏🏻👍🏻👍🏻👍🏻👍🏻
What transpired with the kiln?
it's on hold.
Opah mark chanel amerika srikat 🇺🇸
Your lumber is true to measurement, i.e. 2x4, 2x6, 1x12, so when someone buys this lumber or you saw to order, how much shrinkage happens after it leaves your place? A 2x4 from a lumber yard or building suppler is not ever a true 2x4. So if a builder uses your fresh lumber, how much does it differ in the end product?
this is what the customer wanted a full 2x4 , stores sells 1-1/2x 3-1/2 as a 2x4.
14:47 Bee
27:16 Bee
Yep, things go a bit slower when Eddie is out there solo!
Part of me wishes I lived a lot closer. I'd love to fill in for ZZ, even though I don't have the majestic beard or experience.
thank you , the beard may take some time to grow lol.
That could have been really bad (23.00 mark). 😳
yes it could have.
Eddie, needs help on those heavy flitches 💪🏻
yes he did.
Been enjoying you for long time BUT I have Never seen the laser
thank you Kim, just look for the green line.
I saw it once, but I think it was a fake. LOLOL.
Why don't you get crazy sometimes and cut some 5×3s. I used those and they make good rafters for a small building.n
if someone orders them lol.
any dogs up dogs down today for the Kids no booms
yes we did.
In a different lifetime ago, I had a grading ticket. Explain to people what you mean about knot size 8' face vs 4' face.
I sure will.
😛😛😛😛😛😛😛❤❤❤❤❤👍👍👍👍👍👍👍👍👍👍👍
Good time to paint those doggies red since your going away
for sure.
Why do you call the Detroit Diesel "the bus motor". Was it's first life in a bus? Ron Sheldon
Safety 1st, camera unimportant.
very true.
Please don’t shoot the dogs.
Cutting 2 x 4's is getting boring. Change things up and cut some 4 x 2's every once in a while. Also that Wayne guy needs to help out if he's gonna keep hanging around!
It's never boring when that saw is spinning and can cut anything that gets too close.
that's a good one Herman , yes we get rid of Wayne at the end of each video lol!
just "LOVE" your sawing, brings back very fond memerories and I also love the work that both of you "Eddy" do and you and it "does show that you both are have ben working together for quite some time and the respect between the two/three, show to one another, "JUST" simply "GREAT" michael in pg bc. can.