I had the same problem with my q5 2009. I asked Audi, they said I had to change the hole headlight.! Instead I followed your instruction, I have no mechanical skills. Bought the lead driver on eBay for 60 Euro. Took me 15 minutes to change it, and save me 1000 euro ! Thanks !!!
Ja war top Danke hast du mal vom Q5 die Schlösser repariert (Beifahrer und hinten links öffnen sich nur von innen, wenn sie verriegelt waren) Grüße Marco
Hallo, die Anleitung ist Klasse, aber funktioniert das auch bei dem Faceliftmodell? Ich habe ebenfalls die Schrauben gelöst, konnte den Scheinwerfer vorziehen, allerdings nicht ausbauen. Kommentare im Internet sagen, dass die Frontstoßstange ausgebaut werden muss. Ist das richtig?
Ciao bel video 😊👍 volevo chiederti i miei fari si forma la condensa all'interno , mi dicono che c'è un tubicino sul faro ma non riesco a capire dove si trova 🤦♂️ potresti fare un video per risolvere il problema della condensa nel faro ? GRAZIE
Tried this on a 2010 plate. The headlight was on sliders so couldn’t come right out. There are 2 DRL units (one on each lamp). The passenger side doesn’t need any movement but the drivers need what’s shown up to removing the lamp on this video. Use a magnetic screwdriver and for added safety a bit of tape when screwing back in. Good luck!
Hey Derek - Did you have to remove the bumper cover to get the headlamp assembly out? I've seen conflicting information. I'm wondering if it has to do with bi-xenon models equipped with headlamp washers (which mine has). I have a new assembly on the way, and hoping it's not too much of a pain to replace. Thanks in advance.
Christian Lee Sorry! Just picked this up. My headlights are on what feels like rails so do slip forward a little. Did this guys stages up to the headlamp removal which I couldn’t manage as it appears fixed on the runners after a couple of inches. It was a simple case of loosening the screws then being careful not to drop them. It’s actually not that hard to do. Just put a little tape over the screw before reassembly to keep from dropping it. Good luck!
Hello mr. Are you repaired a 2013-2017 drl light failure? I have the problem 02897 on my right drl led bixenon headlight... I changed the drl piece, but didn’t want to work... Is possible an internal problem?
Das Video ist echt gut.Allerdings musste ich feststellen,das mein Scheinwerfer da anders ist.An der Klappe für das TFL ist bei meinem einfach nur so eine Klappe und sonst nichts.
There are total 5 screws which are fixing the headlight body. Three are accessible from the top, at 1:40 of the video there is a hint how to access the 2 lower ones.
Absolut der Hammer, ersparnis von 1000 € vielen Dank weiter so.
I had the same problem with my q5 2009. I asked Audi, they said I had to change the hole headlight.! Instead I followed your instruction, I have no mechanical skills. Bought the lead driver on eBay for 60 Euro. Took me 15 minutes to change it, and save me 1000 euro ! Thanks !!!
what's the part # or link ? mine just went faulty on driver side, from a 2015
@@tayonguyen 8R0907472B seems to be the part#. Did some research today.
What is 2009 part number
I can’t find the driver module after opening the cover , is it screwed in?
Super habe grad das Problem und die Werkstatt sagt mir es muß ein neuer Scheinwerfer eingebaut werden na ganz toll, vielen dank für die top Erklärung
Ja war top
Danke hast du mal vom Q5 die Schlösser repariert (Beifahrer und hinten links öffnen sich nur von innen, wenn sie verriegelt waren)
Grüße Marco
Herzlichen Dank, hat mir sehr geholfen! Weiter so ;-)
GUTEN TAG ich habe das gleiche Problem..wieviel würde das kosten wenn ich mein Auto dahin bringe und sie reparieren das?
Hi und wo kann man so ein Steuergerät reparieren lassen und wieviele Euronen wird man dann los?
Hallo, die Anleitung ist Klasse, aber funktioniert das auch bei dem Faceliftmodell? Ich habe ebenfalls die Schrauben gelöst, konnte den Scheinwerfer vorziehen, allerdings nicht ausbauen. Kommentare im Internet sagen, dass die Frontstoßstange ausgebaut werden muss. Ist das richtig?
Ciao bel video 😊👍 volevo chiederti i miei fari si forma la condensa all'interno , mi dicono che c'è un tubicino sul faro ma non riesco a capire dove si trova 🤦♂️ potresti fare un video per risolvere il problema della condensa nel faro ? GRAZIE
Tried this on a 2010 plate. The headlight was on sliders so couldn’t come right out. There are 2 DRL units (one on each lamp). The passenger side doesn’t need any movement but the drivers need what’s shown up to removing the lamp on this video. Use a magnetic screwdriver and for added safety a bit of tape when screwing back in. Good luck!
Hey Derek - Did you have to remove the bumper cover to get the headlamp assembly out? I've seen conflicting information. I'm wondering if it has to do with bi-xenon models equipped with headlamp washers (which mine has). I have a new assembly on the way, and hoping it's not too much of a pain to replace. Thanks in advance.
Christian Lee Sorry! Just picked this up. My headlights are on what feels like rails so do slip forward a little. Did this guys stages up to the headlamp removal which I couldn’t manage as it appears fixed on the runners after a couple of inches. It was a simple case of loosening the screws then being careful not to drop them. It’s actually not that hard to do. Just put a little tape over the screw before reassembly to keep from dropping it. Good luck!
I was able to replace it for DRL $57. I did not have to take the light out but it was super tight.
Hello mr. Are you repaired a 2013-2017 drl light failure? I have the problem 02897 on my right drl led bixenon headlight... I changed the drl piece, but didn’t want to work... Is possible an internal problem?
Top so weiter danke ☺️
Bitte haben sie wie kann auch Montieren Stüergert parkbremse für auch Audi Q5 gleich
Hallo, ist der Deckel den von den Klipps und Kabel lösen das AFS Leistungsmodul?
Hallo bei meinem Q5 geht das kurven licht nicht mehr,ist das eine H7 lampe und wie kann man dena wechseln,Audi verlangt 230Euro
Very helpful - despite my language barrier.
den Stecker von der Frontleuchte (Min.1.50)....wie kriege ich den ab...habe versucht den abzuziehen...möchte den Stecker nicht kaputt machen.
Ist das bei einem sq5 8r auch so einfach?
Das Video ist echt gut.Allerdings musste ich feststellen,das mein Scheinwerfer da anders ist.An der Klappe für das TFL ist bei meinem einfach nur so eine Klappe und sonst nichts.
I am not able to remove headlamp assembly , I cannot wiggle it out !
How did you manage to get it out? Or did you replace the DRL module without taking it out.
There are total 5 screws which are fixing the headlight body. Three are accessible from the top, at 1:40 of the video there is a hint how to access the 2 lower ones.
Unde va aflati?
Schon lustig, daß du vier Befestigungen findest, obwohl der Scheinwerfer nur mit drei Schrauben montiert ist.
No music please!
in english plz?
You can switch on auto translate on youtube to see the english version.