Hi I'm Matt I'm new in the hvac world just got a job I'm starting today out here in Tampa FL super nervous and excited . So I'd like to learn as much as possible
Thanks for sharing. I just got my entire HVAC replaced and wonder what would be the most important parts to register to ensure I get the guarantee. Any kind advise would be greatly appreciated!
I want to learn how to do hvac, i started a business i mexico selling mini splits, I buy them in the US and sell them more expensive in Mexico. I want to learn more on how to install them and maintenance, so I can mark up my service cost to my customers.
Will be starting HVAC schooling this August. Very excited to get the ball rolling. I don’t consider myself to be the most handy person but I’m very eager to get there. Any advice for someone entering the field fresh with little to no experience??
I have a 2008 Carrier heat pump with a back up gas furnace. It's operated with a Carrier Infinity T stat with an interface board. Can that setup be replaced with a generic T stat? T stat wiring is R O Y G only. Thanks.
Thank you. I'm an electric graduate and looking at HVAC now. Buying tools and learning new videos like yours. Video like this helps a newbie get their mind right..
MY HOUSE VENTS BLOW HARD IN MY MASTER BEDROOM ,LIVING ROOM AND KITCHEN, BUT MY TWO BEDROOMS ON THE BACK OF THE HOUSE DON'T SEEMED TO BE WORKING . I CAN HERE IT BLOW IN THE OTHER ROOMS BUT NOT IN THE TWO OTHER BEDROOMS, WHAT DO YOU THINK THE PROBLEM COULD BE?
Jason here from Waukesha Wisconsin! Hey, new guy to building maintenance and I have NO HVAC experience at all. When called for heat not working, or no air conditioning I have no idea what to do! Any and all help is very much welcome!
Join this channel to get access to perks: ua-cam.com/channels/uMyjTVlkM4xZ5z_eSyoB1w.htmljoin Wanna learn more about hvac? Check out my hvac tips for technicians playlist. ua-cam.com/play/PLVjetZt5xgenmO76adHwb2ctyeBIFKUus.html
Great video, I have a question I am having trouble with a refrigerator compressor working for a few seconds and turn off I checked capacitor is good 189-227 UF reading 208 what do you think the problem might be thanks 🙏
Hello Taddy. I just got a new Trane heat pump A/C system 4 tons for my house. The set temperature is 78 F. It run on cool mode and blows the cool air stronger than normal. It takes 5 minutes to start the run again when it stops from cool mode run. How to troubleshoot or find out the problem and to fix it. Thank you
So far everyone I’ve hired to fix these home of mine, I’ve either been ripped off or it’s been not done right. How will joining ensure I can just teach myself through your guidance?
Really ain't to hear that but it's the sad truth about this industry Well if you join level one and pay two dollars a month I'll give you my email If you join level four I will give you my phone number Or you can join level three And have access to all my members only videos Figure out which one is good for you and let me know when you join and I'll help
Hello everyone My name is Ahmad Wais from Afghanistan living in US about 10 years. I started as a Residential tech 2020 and 2022 started as light commercial refrigeration so far I am enjoying to be in this field I am very glad to see all this videos on UA-cam sharing knowledge Thank You....
I think I joined. I defiantly subscribed though. I am so interested in learning about furnaces and boilers. I have a few older models in my rental properties. I think someone tampered with them and I want to make sure the correct parts are in the furnaces. I have an old York serial# WO-O65959. I don’t know which heat sensor should be installed. I do know that the renter changed the motor and or blower. Again, I don’t know the correct parts. The furnace works fine and the flame is blue. The problem is the heat sensor gets really dirty and needs replacement a few times each winter. Plus when I turn the thermostat all the way off, my pilot often will blow out. It looks as if I am blowing out a lit candle. Where can I get the parts for this furnace? I search on line but I always see newer model furnaces. I don’t know if the parts are interchangeable. I am going to clean the furnace today and check the heat exchanger. Also, do you know where I could get the Manuel for this older furnace. I would like to watch all of your videos. Where can I watch them
So glad you're wanting and willing to learn most parts are interchangeable for furnaces. There are also Universal parts that are made to support older furnace.
Join this channel to get access to perks: ua-cam.com/channels/uMyjTVlkM4xZ5z_eSyoB1w.htmljoin Wanna Learn more about hvac? Check out my hvac tips for technicians playist. ua-cam.com/play/PLVjetZt5xgenmO76adHwb2ctyeBIFKUus.html
Thank you i joined and subscribe to channel I’m from Maryland looking to join the hvac program but I’m 17 so I’m looking for a paid apprenticeship where I can learn more
Hey great videos awesome, can you help me im looking for an hvac tech school or a community college, dont matter wich state its on, i just would like to find a good Hvac schoo.
@@TaddyDigest hey first of all thanks for replying my text, nyc Brooklyn I been looking and can’t find one here as good as some out of state I looked at TJC community college @texas and also Tulsa tech in Oklahoma. But I was wondering if you knew of a good hvac program I feel like it’s hard to find a good one would you recommend one ? Thanks again. Love your videos 💯
I just sing to online HVAC Classes with Penn Foster, but I think with you, I could learn more and some day become a certified HVAC TECHNICIAN GREAT VIDEOS AND OF COURCE THE VIDEOS ARE GREAT, BECAUSE THE TEACHER IS GREAT. I LIVE IN LOS ANGELES, CALIFORNIA
Thank you for the great information about names ,I just signed up for HVAC, and I need to start getting familiar with parts names ,it seems like there is a lot to learn, I pray God 🙏 I can learn all of this and be able to be a good technician to help many people as posible. I want to do my best to help people out. And be able to travel shoot . Makes me a little intimidating all this. God bless you and thank you for the videos 🙏
I am using Honeywell thermostat for my new Trane heat pump a/c system. When I choose Off mode in thermostat then I can see room temperature rising from 77 F to higher like 78, 79 and so on. I choose Cool mode to run AC and set temperature to 77 F while room temperature is 78, 79 or 80 F. System starts to run AC. I expect to see room temperature drop from 80 to 77, or 76 so that system can stop. Room temperature drops to 77 and system stops. However I do not see room temperature rise above set temperature 77 F, but system starts to run and from now on I see no change in room temperature. It is 77 F and system runs and stops in a cycle with no change in reading room temperature from thermostat.
I'm new here I really appreciate you fir the teaching. I'm a hvac technician but my background is very low cause I just like it but I need more teachings
I joined. Just started HVAC a few days ago with a great company Tennessee Home Solutions, Im not new to the electrical side which does help but I want to learn all I can in this field. Thank you for your video because this really helps.
Thank you , I'm currently doing certificate Air conditioning and Refrigeration in college and your content is very helpful. 😊 Hope I can get to asks you more questions.
Im back to watch again..
Coeur D Alene Idaho buys heat pumps! Thanks
I joined, I am new to this and was thinking about going to college and taking this career.
Hi I'm Matt I'm new in the hvac world just got a job I'm starting today out here in Tampa FL super nervous and excited . So I'd like to learn as much as possible
You can do it!
Thanks for sharing.
I just got my entire HVAC replaced and wonder what would be the most important parts to register to ensure I get the guarantee. Any kind advise would be greatly appreciated!
Watching from Jackson Mississippi
Thank you
your welcome Glad you watched 👀 😊
hello i just joined
excellent send me an email I have a bunch of guides for you tadfuller1@gmail.com
hall effect sensor replaces pressure switch & sends communication signal to ignition board letting it know its working.Commonly seeen on Carrier.
As a hvac guy me being an electrician and hvac guy.I realize that hvac only guys need electricians for heavy duty controls.
I enjoy the video keep it going
Thank you
I like the message I want to hear more
I’m a new tech needing to be a great technician any pointers??
Go on my live videos and ask me questions real time I can help you
I got tons of videos check out my playlist HVAC tips for technicians
I joined!
I joined
Richard You Are Awesome Thank You for Joining
I got a question, I’ve been floating the idea of going for a mechanical license and was wondering if it’s worthwhile
depends on your experience and what you can do with it 😉
@@TaddyDigest I just graduated from community college and am an apprentice at a family-owned company
How much would a blower motor for the furnace cost
150 bucks
@@TaddyDigest I had a guy charge me 550 for a furnace blower motor and a circuit board
Sounds about right
Control board was probably a 150 to $200
Motor was probably a $150
And labor was probably around a 150 to 200
@@TaddyDigest that was just for parts 550 it cost me 731 with labor total I’m kinda pissed thinking I got ripped off
I've seen blower motors cost 500 to a $1000
I've seen certain control boards cost $700
I'm back, found an old bee hive today in condenser disconnect, blew the main fuse for the home. No wire connectors and the lid was open.. quick fix..
One part I recognize it’s my grandma‘s cordless phone
I want to learn how to do hvac, i started a business i mexico selling mini splits, I buy them in the US and sell them more expensive in Mexico. I want to learn more on how to install them and maintenance, so I can mark up my service cost to my customers.
Not a tech but someone leaving automotive to pursue hvac supplies retailing. Really helpful definitely will watch more.
Glad it was helpful!
I joined am khudani Tshirema from South Africa
Will be starting HVAC schooling this August. Very excited to get the ball rolling. I don’t consider myself to be the most handy person but I’m very eager to get there. Any advice for someone entering the field fresh with little to no experience??
watch my videos
I have a 2008 Carrier heat pump with a back up gas furnace. It's operated with a Carrier Infinity T stat with an interface board. Can that setup be replaced with a generic T stat? T stat wiring is R O Y G only. Thanks.
It can yes
❤ Maryland, I would like to be hvac technical
I need help studying for the EPA have any tips
Hi I'm Mokone an electrical engineer graduate, I wanna be a BMS technician HVAC. Problem is that I don't have basics of HVAC
Well you are in the right place
I have a bunch of videos that could be very helpful to you
Check out my playlist hvac tips for technician
Very informative videos....Galing mo Pare Ted..
From ; Philippines
Thanks for watching!
I need full lessons and certificates help me how
Thank you. I'm an electric graduate and looking at HVAC now. Buying tools and learning new videos like yours. Video like this helps a newbie get their mind right..
You're welcome so glad you enjoyed the videos please keep supporting me and I promise I will do lots more videos
Hello, can you install a By-flow dryer on a AC?
Please help
Thank you 🙏
Yes
Super awesome and informative videos my man! Thanks for creating content to help the “new into hvac” technicians like myself.
You're welcome and thank you so much for your appreciation
Me too!!! I’m brand new and want to be successful and get along with the leads is my biggest concern
MY HOUSE VENTS BLOW HARD IN MY MASTER BEDROOM ,LIVING ROOM AND KITCHEN, BUT MY TWO BEDROOMS ON THE BACK OF THE HOUSE DON'T SEEMED TO BE WORKING . I CAN HERE IT BLOW IN THE OTHER ROOMS BUT NOT IN THE TWO OTHER BEDROOMS, WHAT DO YOU THINK THE PROBLEM COULD BE?
Several things can be your problem
I'll do a video about it sometime
I joined . Thanks
excellent thank you my friend
here is my email tadfuller1@gmail.com
I have a bunch of guides I want to send you
Why would a pressure switch have a water column level? The heater is all gas heat which I presume uses no water? Where does the water come from?
It's just a measurement of a negative pressure
I want you help me build a new design of compressor my idea and some of your experience
sounds cool
Jason here from Waukesha Wisconsin! Hey, new guy to building maintenance and I have NO HVAC experience at all. When called for heat not working, or no air conditioning I have no idea what to do! Any and all help is very much welcome!
Check out my playlist brother I got over five hundred videos just for you
Join this channel to get access to perks:
ua-cam.com/channels/uMyjTVlkM4xZ5z_eSyoB1w.htmljoin
Wanna learn more about hvac? Check out my hvac tips for technicians playlist.
ua-cam.com/play/PLVjetZt5xgenmO76adHwb2ctyeBIFKUus.html
@@TaddyDigest thank you so much! Can’t tell you how much I appreciate that.
Great video, I have a question I am having trouble with a refrigerator compressor working for a few seconds and turn off I checked capacitor is good 189-227 UF reading 208 what do you think the problem might be thanks 🙏
check and see if it is getting hot also check the amp draw
I will do thanks 👍
Chad Rod Dallas Tx
Hello Taddy. I just got a new Trane heat pump A/C system 4 tons for my house. The set temperature is 78 F. It run on cool mode and blows the cool air stronger than normal. It takes 5 minutes to start the run again when it stops from cool mode run. How to troubleshoot or find out the problem and to fix it. Thank you
Probably just has a five minute delay built into the board or the thermostat.
Can you fix this for us.
So far everyone I’ve hired to fix these home of mine, I’ve either been ripped off or it’s been not done right. How will joining ensure I can just teach myself through your guidance?
Really ain't to hear that but it's the sad truth about this industry
Well if you join level one and pay two dollars a month I'll give you my email
If you join level four I will give you my phone number
Or you can join level three
And have access to all my members only videos
Figure out which one is good for you and let me know when you join and I'll help
@@TaddyDigest there ya go buddy, here’s $2 a month
Good job
Thanks
Hello everyone My name is Ahmad Wais from Afghanistan living in US about 10 years. I started as a Residential tech 2020 and 2022 started as light commercial refrigeration so far I am enjoying to be in this field I am very glad to see all this videos on UA-cam sharing knowledge Thank You....
You're welcome i'm glad you're here thank you so much for watching
Just got in the trade should I become a apprentice?
absolutely
Thanks for sharing your knowledge.
I learned a lot from your videos
I’m a service technician .
I’m getting better and better watching your videos.
Glad to help
👍🏽
What parts do you recommend to keep in the truck or shop?
I've got a few videos on that
check them out on my playlist hvac tips for technicians.
I join today i send a issue i have with unit my email is there.
awesome here is my email tadfuller1@gmail.com
I join
God bless you
I joined
I think I joined. I defiantly subscribed though. I am so interested in learning about furnaces and boilers. I have a few older models in my rental properties. I think someone tampered with them and I want to make sure the correct parts are in the furnaces.
I have an old York serial# WO-O65959. I don’t know which heat sensor should be installed. I do know that the renter changed the motor and or blower. Again, I don’t know the correct parts. The furnace works fine and the flame is blue. The problem is the heat sensor gets really dirty and needs replacement a few times each winter. Plus when I turn the thermostat all the way off, my pilot often will blow out. It looks as if I am blowing out a lit candle. Where can I get the parts for this furnace? I search on line but I always see newer model furnaces. I don’t know if the parts are interchangeable. I am going to clean the furnace today and check the heat exchanger. Also, do you know where I could get the Manuel for this older furnace.
I would like to watch all of your videos. Where can I watch them
I don’t have a heat sensor. I have a thermalcouple
So glad you're wanting and willing to learn most parts are interchangeable for furnaces.
There are also Universal parts that are made to support older furnace.
Here is the joint button for you to join and be member. I will send you my email tadfuller1@gmail.com
Join this channel to get access to perks:
ua-cam.com/channels/uMyjTVlkM4xZ5z_eSyoB1w.htmljoin
Excellent information, thanks! I am just a knife-maker in MO ;)
Right on!
i want to learn plese realy need your help thanks
Join this channel to get access to perks:
ua-cam.com/channels/uMyjTVlkM4xZ5z_eSyoB1w.htmljoin
Wanna Learn more about hvac? Check out my hvac tips for technicians playist.
ua-cam.com/play/PLVjetZt5xgenmO76adHwb2ctyeBIFKUus.html
I join
Thanks a lot !
You're welcome bro
Thank you i joined and subscribe to channel I’m from Maryland looking to join the hvac program but I’m 17 so I’m looking for a paid apprenticeship where I can learn more
Thanks bro needed info on parts for a job for HVAC and plubming
Glad I could help
Hey great videos awesome, can you help me im looking for an hvac tech school or a community college, dont matter wich state its on, i just would like to find a good Hvac schoo.
Thank you
I really appreciate you watching my videos
What state are you in?
@@TaddyDigest hey first of all thanks for replying my text, nyc Brooklyn I been looking and can’t find one here as good as some out of state I looked at TJC community college @texas and also Tulsa tech in Oklahoma.
But I was wondering if you knew of a good hvac program
I feel like it’s hard to find a good one would you recommend one ? Thanks again. Love your videos 💯
Are you looking for online or are you looking to go somewhere to learn
@@TaddyDigest somewhere to learn. it can be a 4 month program to 1 year full time program
I hope you can see my comments
I joined you from Greenville city Liberia 🇱🇷. I'm ac Technician.
I was enjoy watching your show sir..thank you & godbless sir..how to apply hvac technician in your company?im a pilipino..
I just sing to online HVAC Classes with Penn Foster, but I think with you, I could learn more and some day become a certified HVAC TECHNICIAN GREAT VIDEOS AND OF COURCE THE VIDEOS ARE GREAT, BECAUSE THE TEACHER IS GREAT.
I LIVE IN LOS ANGELES, CALIFORNIA
Wonderful!
thanks for watching Victor
You Can do it 💪brother
I joined on you Chanel
Join
ua-cam.com/channels/uMyjTVlkM4xZ5z_eSyoB1w.htmljoin
Thank you for the great information about names ,I just signed up for HVAC, and I need to start getting familiar with parts names ,it seems like there is a lot to learn, I pray God 🙏 I can learn all of this and be able to be a good technician to help many people as posible. I want to do my best to help people out. And be able to travel shoot . Makes me a little intimidating all this.
God bless you and thank you for the videos 🙏
My name is Alfonso im from California ventura county city of Oxnard really like your teaching
Thank you sooooo much
You're welcome my brother
Thanks Tad for taking the time to show us all the great information. Your videos are never boring.
I got a few questions. I start HVAC school Monday. 👍
Micro-fay-rads lol. I really like the video though. Very helpful
Awesome. Great
Thank you! Cheers!
I am using Honeywell thermostat for my new Trane heat pump a/c system. When I choose Off mode in thermostat then I can see room temperature rising from 77 F to higher like 78, 79 and so on. I choose Cool mode to run AC and set temperature to 77 F while room temperature is 78, 79 or 80 F. System starts to run AC. I expect to see room temperature drop from 80 to 77, or 76 so that system can stop. Room temperature drops to 77 and system stops. However I do not see room temperature rise above set temperature 77 F, but system starts to run and from now on I see no change in room temperature. It is 77 F and system runs and stops in a cycle with no change in reading room temperature from thermostat.
Sounds like it's working properly to me
Thank you Tadd
your welcome
THANK YOU
You're welcome my friend
Good show pal.
Thank you bill
I'm new here I really appreciate you fir the teaching. I'm a hvac technician but my background is very low cause I just like it but I need more teachings
Thank you
You're welcome brother
Thanks!
excellent thank you so much 😊
I joined
Thank YOU for subscribing Joe
I'm from Haiti, but I'm taking first class soon. I need more videos like that please. God bless you
Thx you
No problem
I join.
Here is the link
ua-cam.com/channels/uMyjTVlkM4xZ5z_eSyoB1w.htmljoin
Joined brother, thanks for your information, it's great
Am abdul from ghana
I join thanks for the tips I’m starting hvac school ..saying thanks all the way from the USVI Caribbean
All the best
Really helpful thanks I had to learn this stuff from the ground up.
I joined. Just started HVAC a few days ago with a great company Tennessee Home Solutions, Im not new to the electrical side which does help but I want to learn all I can in this field. Thank you for your video because this really helps.
Glad to help my friend. Thank you so much for joining here is my email
tadfuller1@gmail.com
Thank you , I'm currently doing certificate Air conditioning and Refrigeration in college and your content is very helpful. 😊 Hope I can get to asks you more questions.
Thanks for all you do.
Thanks for the video's thinking about becoming a HVAC TECH!
You can do it
Def helped going to school online for hvac and seeing it in person helps much more than being told what it is
Great info bro.
Thank you
Please share the video
Great video.Very helpful!
Hi iam ali from Iraq ❤❤
I'm from California, about to start my HVAC online class next week, Thank's Tad!
You're welcome brother
You're going to do great things
I’ve subscribed to you I am in school for hvac following you to learn all the knowledge I need to know
Awesome thank you!
Just got started in HVAC, this helped out alot. Thank you.
Glad it helped!
I think there was some great information in that video. Good job man.
Thanks Richard 👍 😊
Start HVAC school Feb 1! Trying to get a heads up 💪✅
Congrats my friend Your gonna do great
Thanks for providing this good video, but it would be better to have someone record it instead of you.
I wish I had somebody who could do it
Thank you I’m brushing up and learning about parts for a position at a parts store I really want. I appreciate your video.
You're welcome thank you so much for watching
Please share the video if you have time