Finally man! Haha been waiting for this, videos are always bad ass , today went to the junkyard got me a lower z71 valance for 10$! My stepside is coming along good
Great video! I just replaced aall 4 speakers on my 2004 Chevy Tahoe! I did not have to remove the 3 10 mm screws! I just came around the speaker with a thin flat head screwdriver !
Right after exterior, sound is my next favorite thing to do. Memphis isn’t bad at all, those coax will get the job done. Just an update if you notice, but my Yukon was dropped for paint yesterday I’m stoked. They’re blocking the whole thing down and welding the roof rack hole’s up. It’s going to be sweet.
There was a yellow and a black wire in my truck. Which is positive and negative? I did the back speakers already and used the black as negative and yellow as positive. 2002 chevy silverado
i love my 2000 Silverado ~ Got to be the best pickup EVER ~ i'am stereo guy! My music got to be banging heavy bass and sounding sweet ~ Since i will have it apart. i will run some more speaker wire for woofers! If i need to. Only place for them bad boys are under the seat! I hate to put them under the seat cause the dirt and things fall into them rattling ~ ITS THE ONLY PLACE TO PUT EM or? Some serious cutting and installing to the door covers ~ I don't want to do that
New factory replacements would fit like the old factory ones.. the question is "are the replacement gm or acdelco as good as after market speakers" I know that some of the gm speakers are pretty good.
The stock replacement speakers I purchased for my 2003 Silverado are made by Bose. It has GM on the speaker but it says it's made by Bose. So they are as good or better than any of the aftermarket replacement speakers.
I got the whole Bose speaker system on my z71 with a Sony touch screen stereo but it’s not loud after I turn it up above 40 the music sounds distorted... any recommendations on what aftermarket speakers I should get ???
That truck is sweet. I ended up not wanting to drill my door, so what I ended up doing is using the door panel and drilling it there. It’s held up surprising well. Center console has its ups and downs but worth it. Honestly did that on my extended cab, had to get the glove box and bottom steering wheel cover (the one that goes above the brakes don’t know the name for it) and it was an easy swap.
Great video Travis. But would be nice to see how you wired the front door speakers. I bought 6.5 Rockford Fosgate for my doors on my 05 single cab. So not sure how I'll wire them
I have a ‘06 Silverado bought it brand new. I want to buy the adapter to just snap it in without soldering etc also you said that there is a bucket (speaker holder) so you can install like the factory did with drilling into door. Where can I purchase those and do they fit most speakers for this truck. Thanks and I appreciate your video and will be using it to install mine when I have time.
@@TWAMotorsports I haven't tried to fit them into the truck yet. But the 6.5 inch pioneers I bought don't fit. I think the adapters only fit 5 3/4 inch. I'm gonna try and Dremel them out until they fit lol
During the video you were going to list a bucket you can buy to pop the speaker into when installing the new ones. Where can I find those, so I don’t have to drill into my door?
Great vid. Got right to it, no BS. Ive been looking on Amazon for replacement speakers and Pyle is like their main speaker. You mentioned they arent great. Do you know about car audio to tell me a good decent priced speaker? I have 2 Rockford Phosgate Punch amps. Should I get coax also? Thanks for any info you take time to give.
Hey create video once again and I agree with some of the other people comments about Memphis Speakers I run them in my vehicle in a are good and I also run there at the fires in mine so you made a good choice maybe the series could be a little better of them but like you said they don't have a whole lot of bass and the ones you chose but a good choice
Just got the V back ill give you the list of what they did here in Massachusetts for me suffice it to say if you hit the gas leaning forward your head will wind up in the trunk. It’s about 650 rwhp
Ok Travis hope all is well. Here are the upgrades on my 2012 CTS V 418 STROKER with forged internationals Manley crank and rods an piston heads oil pump upgraded V2R stage 2 CAM 3 Bolt timing gear New timing chain new push rods Valve covers ported heads ported the Super Charger ported Throttles Body Ported 1050X injectors E85 sensor and a few others but i was wrong this thing it has something like 800hp to the crank and about 700 WHP the bill was crazy the car is super fast. The look on my wife face when the credit card bill came in NOT PRICELESS
he hee probably as bad as mine I got My speaker kit in today. I got the factory speaker from Walmart > Factory Speaker Upgrade Harmony R65 R46 New it was 83 dollars with taxes and free shipping. I got a bunch of never used big woofer. only place to put them in under the seats The factory speakers was AWESOME. i hope these are just as good if not even better what i'am hoping any way
@@TWAMotorsports I'am like every one else who had to install these speakers. I had to drill holes for each speaker, ONLY THING THAT HELPED was the wiring connectors harness ! They clip right on the factory clips to the pickup speaker wires and to the speakers THAT WAS THE ONLY LIFE SAVER! I found if your will take the speaker covers out by bending them straight out. there clip is made from the speaker cover. You can just take off the speaker cover from now on. with out taking off the side panels Use a light coat of silicone them back in. The sound is not a QUANLITY sound. More of a cheap speaker sound. But it is what it is. And they work with out cracking and buzzing he hee
What size speaker is did you install? I want to replace all the speakers in my 06 chevy silverado crew cab. I looked up the speaker size. Google said they're 6 3/4 but I cant find that speaker size anywhere.
@TWA Motorsports chalk it up as constructive criticism! The more concise on these things the better! I know you know a ton more about auto than me, it's just painful to go through all the clutter in a lot of these how to videos
Save yourself some time and skip to 3:40.
Tools needed in the description.
Thanks
I bet it made a big difference. I just got a touch screen radio and all 4 door speakers on my tahoe yesterday
Huge difference
Finally man! Haha been waiting for this, videos are always bad ass , today went to the junkyard got me a lower z71 valance for 10$! My stepside is coming along good
Nice score.
All vehicles are projects
So true
Great video! I just replaced aall 4 speakers on my 2004 Chevy Tahoe! I did not have to remove the 3 10 mm screws! I just came around the speaker with a thin flat head screwdriver !
Thank you. Yeah that is another option if you are careful
I can use the same speakers as the ones on the front doors?
@@elmaster6207 you definitely can! I put 6.5 in all 4 doors of my 2004 Tahoe
Yes
Could u use the old cables and everything? For the speakers
Yooo this guy has everything there is to know about these vehicles 🤌🏽
I don't know about that
Thanks! Saved me from having to drag my son down here to do it. ❤️🤘
Right after exterior, sound is my next favorite thing to do. Memphis isn’t bad at all, those coax will get the job done.
Just an update if you notice, but my Yukon was dropped for paint yesterday I’m stoked. They’re blocking the whole thing down and welding the roof rack hole’s up. It’s going to be sweet.
Yeah they sound great for the price. Good luck on your project
I literally just did this on my 05 crew, but here I am.
Lol. What did you use?
I’m bout to do mine
@@redperez2853 What speakers you using?
There was a yellow and a black wire in my truck. Which is positive and negative? I did the back speakers already and used the black as negative and yellow as positive. 2002 chevy silverado
Either. Should not matter
i love my 2000 Silverado ~ Got to be the best pickup EVER ~ i'am stereo guy! My music got to be banging heavy bass and sounding sweet ~ Since i will have it apart. i will run some more speaker wire for woofers! If i need to. Only place for them bad boys are under the seat! I hate to put them under the seat cause the dirt and things fall into them rattling ~ ITS THE ONLY PLACE TO PUT EM or? Some serious cutting and installing to the door covers ~ I don't want to do that
Travis do I have to sawtry them or is there another way mine doesn’t come with and extra wire or nothing
You don't have to. You could just use spade connections
New factory replacements would fit like the old factory ones.. the question is "are the replacement gm or acdelco as good as after market speakers" I know that some of the gm speakers are pretty good.
They are better than factory
The stock replacement speakers I purchased for my 2003 Silverado are made by Bose. It has GM on the speaker but it says it's made by Bose. So they are as good or better than any of the aftermarket replacement speakers.
That works too
I got the whole Bose speaker system on my z71 with a Sony touch screen stereo but it’s not loud after I turn it up above 40 the music sounds distorted... any recommendations on what aftermarket speakers I should get ???
I like these but they are not the best
That truck is sweet. I ended up not wanting to drill my door, so what I ended up doing is using the door panel and drilling it there. It’s held up surprising well. Center console has its ups and downs but worth it. Honestly did that on my extended cab, had to get the glove box and bottom steering wheel cover (the one that goes above the brakes don’t know the name for it) and it was an easy swap.
I looked at doing the door panels but thought it would be a pain to remove and install
TWA Motorsports not really. I used quick connects and made the speaker wire a bit longer for that reason. Aside from that I like it.
Do you have to disconnect the ground for the battery or any other precaution before starting to change them ?
I generally don't but it would hurt
Great video Travis. But would be nice to see how you wired the front door speakers. I bought 6.5 Rockford Fosgate for my doors on my 05 single cab. So not sure how I'll wire them
Sorry. I should have showed that.
Thinking about buying them now how do they sound???
Better than stock
I have a ‘06 Silverado bought it brand new. I want to buy the adapter to just snap it in without soldering etc also you said that there is a bucket (speaker holder) so you can install like the factory did with drilling into door. Where can I purchase those and do they fit most speakers for this truck. Thanks and I appreciate your video and will be using it to install mine when I have time.
Think I linked in video description
Thanks for a informative video.
Thank you. Hopefully it helps
Travis, Did you ever replace the center console on this truck and is there a video?
I did and made a couple videos on that subject actually
Memphis is good but that's their bottom line spring for one of their better level of speakers
Yeah I didn't need to rock out just sound.
Hey man, I bought the speaker adapters you linked and they don't fit 6.5 inch speakers?
They should unless something has been changed on the truck
@@TWAMotorsports I haven't tried to fit them into the truck yet. But the 6.5 inch pioneers I bought don't fit. I think the adapters only fit 5 3/4 inch. I'm gonna try and Dremel them out until they fit lol
Some adjustments required lol
Travis, is it possible to just pop out speaker grills without removing door panel? 2006 2 door Silverado.
Not without breaking them.
During the video you were going to list a bucket you can buy to pop the speaker into when installing the new ones. Where can I find those, so I don’t have to drill into my door?
I'm not sure they make them anymore
Great video!!
Thank you
Great vid. Got right to it, no BS. Ive been looking on Amazon for replacement speakers and Pyle is like their main speaker. You mentioned they arent great. Do you know about car audio to tell me a good decent priced speaker? I have 2 Rockford Phosgate Punch amps. Should I get coax also? Thanks for any info you take time to give.
Thank you
Hey create video once again and I agree with some of the other people comments about Memphis Speakers I run them in my vehicle in a are good and I also run there at the fires in mine so you made a good choice maybe the series could be a little better of them but like you said they don't have a whole lot of bass and the ones you chose but a good choice
Thank you. Yeah for the money I'm happy
Another good video Travis. Learning a lot thanks
Thank you Kevin
Just got the V back ill give you the list of what they did here in Massachusetts for me suffice it to say if you hit the gas leaning forward your head will wind up in the trunk. It’s about 650 rwhp
@@kevintownsend3721 I bet that's way more fun to drive now😎
Ok Travis hope all is well. Here are the upgrades on my 2012 CTS V 418 STROKER with forged internationals Manley crank and rods an piston heads oil pump upgraded V2R stage 2 CAM 3 Bolt timing gear New timing chain new push rods Valve covers ported heads ported the Super Charger ported Throttles Body Ported 1050X injectors E85 sensor and a few others but i was wrong this thing it has something like 800hp to the crank and about 700 WHP the bill was crazy the car is super fast. The look on my wife face when the credit card bill came in NOT PRICELESS
@@kevintownsend3721 lol. I know it's not cheap
he hee probably as bad as mine I got My speaker kit in today. I got the factory speaker from Walmart > Factory Speaker Upgrade Harmony R65 R46 New it was 83 dollars with taxes and free shipping. I got a bunch of never used big woofer. only place to put them in under the seats The factory speakers was AWESOME. i hope these are just as good if not even better what i'am hoping any way
Probably be better
@@TWAMotorsports I hope they are. I usually make own speaker system. but not this time. There no room
Understand that
@@TWAMotorsports I'am like every one else who had to install these speakers. I had to drill holes for each speaker, ONLY THING THAT HELPED was the wiring connectors harness ! They clip right on the factory clips to the pickup speaker wires and to the speakers THAT WAS THE ONLY LIFE SAVER! I found if your will take the speaker covers out by bending them straight out. there clip is made from the speaker cover. You can just take off the speaker cover from now on. with out taking off the side panels Use a light coat of silicone them back in. The sound is not a QUANLITY sound. More of a cheap speaker sound. But it is what it is. And they work with out cracking and buzzing he hee
Nice. I should have used those adapters
U should have try DS'18 speakers
Or skar audio .
May have too
Never tried skar but would like to
@@TWAMotorsports good budget , even there cheapest stuff is decent .
What speakers should I put in my 2000 Silverado single cab?
I like these for the money
What brand do you think is a good mid range option? Is kicker a good brand?
@@extendomigs I have used kicker and like them before
Focal !
Great brand I hear too
Great video👍🏻
Thank you
Would they work fine if I used the wire connectors?
You could
Need some of them. Nice
Yeah it's worth $100
Need some new ones on my 11’ crew cab
Yeah factory stuff just doesn't last.
Me frount door speakers work intermittently. Most of the time they dont. Got any ideas why?
Probably blown. That is what mine would do. Check the connections but if they are originals they are probably toast.
@@TWAMotorsports yep they original. Gess I'll get some new ones.
Just ordered every thing using your affiliate links.
I think you will like them👍
You’re gonna need a different glove box for the center console swap
Correct
I installed MTX Terminators on my sierra back in January but sadly i traded it in for a new car yesterday
Should have pulled those things out lol
3:40
I was just about to look up how to replace them lol, the whole left side of my truck the speakers don’t work!
Yeah pretty common
What colors are positive and negative for the factory wiring
I made a video on my newest one with that info. I don't remember honestly
What size speaker is did you install? I want to replace all the speakers in my 06 chevy silverado crew cab. I looked up the speaker size. Google said they're 6 3/4 but I cant find that speaker size anywhere.
I used the 6 1/2 listed in description. I also listed the pods to install if needed
6 1/2s front and 5 1/4s in rear??
I did 6 1/2 in both
There’s a console u can replace that has phone charger on it.
I have seen that.
@@TWAMotorsports look for 7-13 jump seat console. I had one in my 07 classic for awhile. I made a video on it.
Will it fit an 01?
Did you end up selling the truck yet
Yes several months ago
Can't you just take off the grill from the speaker with like a flat head instead of taking the whole door panel off??
Omg no
HEY MEMPHIS IS GOOD
I have honestly never used it before
Memphis is really good. Amps are amazing and so are the subs
@@scottydoesntknow254 never tried their other stuff
So confused. Your selling it right? Why put money into it?
I have several videos filmed ahead of time
Not first
Lol maybe next time
5
You beat around the bush before you get to the point
Thank you for the feedback
Sounds like you are very knowledgeable but this is supposed to be a video on speaker replacement. I really don’t care about all your other projects.
first
👍👍👍👍
Why all the talk before getting to the speakers? It's killing me lol
Can't please everyone
@TWA Motorsports chalk it up as constructive criticism! The more concise on these things the better! I know you know a ton more about auto than me, it's just painful to go through all the clutter in a lot of these how to videos
Thank you for the comments
ua-cam.com/video/MOrkzcSyQLQ/v-deo.html
Link to the video of console
P lo o
Stop talking.
Takes you way too long to get to business..
Thank you for that feedback