@thewheelman282 there is one advantage I can think of for a dual BIOS; so a person ca run a debug BIOS and a custom BIOS on the same machine and use the XDK to develop new software without incurring the cost of an actual debug console. Other than that, the only other scenario I can think of for a dual BIOS setup would be for the purposes of having a fallback BIOS to boot from while developing a new custom BIOS.
Excellent tutorial, thanks for all the detailed information. I do have a question though: would TSOP flashing allow me to replace the original DVD drive with an aftermarket one? I realize this is probably a moot point since I can just FTP the games to the hard drive, but I'd still like to have the option of playing my original games even after the factory drive inevitably dies.
as far as im aware, using a custom BIOS doesnt have any bearing on this. The main obstacle is the firmware on the DVD drive. The original drive firmware can read original xbox games while PC drives cannot unless you flash xbox firmware to the drive. The most a custom BIOS would allow is playing burned games on either type of drive
[quote="stu2b2"]Hello I’ve Softmoded my Xbox then done a tsop now he’s the problem I can get it to show in hd/720p but when I got to play a backed up game ie xbox original game it loads up but I can not see it put the standard cable back in it work but with crap res so I go to settings it not pal bonus so go to ms dash it loads but now I can not see the standard dash now what is going on I’ve I tryed this every way I can please please help the only thing I can think that has changed is the tsop and uninstalling the softmod 🤯🤬
Hi, I have a question about the TSOP chip. In an effort to mod a 1.0 Original xbox, I apparently wired it wrong and cooked my TSOP chip. Is it possible to install a new TSOP chip and flash it?
It's possible but very difficult. You can either buy a new TSOP chip and flash it with a programmer and PC then solder it in or you can solder in a new blank TSOP chip and install a modchip and then flash the new TSOP with an xbox flashing tool.
@@thewheelman282 Thanks for the promt reply. I was attempting to install an Aladdin XT Plus 2 mod chip. The only thing I can figure is that I connected my DO wire to the wrong point. Maybe. My DVD stopped working, so that is why I was trying to mod it. Thanks!!
thanks for the video, it really helps to understand.. I'm trying to fix an error 12 in a soft modded crystall version which i suspect that is an 1.6... And the DVD drive just died in the same day ....
I've checked twice and even use another IDE cable, but no success. I'm thinking buy a mod chip to remove the DVD drive itself(no use for me) and put a larger HDD. Right now i'm having issues finding mod chip for xbox.. every site i visit is out of stock, or charges a lot for a mod chip. Do you have any suggestion?
go here for affordable modchips assemblergames.com/l/threads/zer0-2k11s-mod-chip-and-installation-shop.43131/ they are migrating servers so the site is down right now but the guy that runs that thread is trustworthy
assemblergames.com/l/threads/zer0-2k11s-mod-chip-and-installation-shop.43131/ the site is down at the moment. they are migrating to new servers. but chips are very affordable there
Been watching a couple of your videos these past weeks and they are great. Thanks for taking the time to make 'em. -J
Thank you very much for the information you shared in this video. I am new to XBOX modding and found this very helpful.
Great Job, this really great in detail. Makes me feel more comfortable to attempt this..
Works! WooHoo! I went all the way through both video and I'm happy:)!
Ok, done with part 1. Part 2 here I come :)
Great explanation! Thanks so much for this video!
Very well explained and very easy to understand great job man thank you
Id love to see a tutorial on installing a alladin xt chip in a windom chip mobo.
@thewheelman282 there is one advantage I can think of for a dual BIOS; so a person ca run a debug BIOS and a custom BIOS on the same machine and use the XDK to develop new software without incurring the cost of an actual debug console. Other than that, the only other scenario I can think of for a dual BIOS setup would be for the purposes of having a fallback BIOS to boot from while developing a new custom BIOS.
Thanks a lot for this. Helped me understand alot.
Do you have successful methods to resolve FRAG problem?
Excellent tutorial, thanks for all the detailed information. I do have a question though: would TSOP flashing allow me to replace the original DVD drive with an aftermarket one? I realize this is probably a moot point since I can just FTP the games to the hard drive, but I'd still like to have the option of playing my original games even after the factory drive inevitably dies.
as far as im aware, using a custom BIOS doesnt have any bearing on this. The main obstacle is the firmware on the DVD drive. The original drive firmware can read original xbox games while PC drives cannot unless you flash xbox firmware to the drive. The most a custom BIOS would allow is playing burned games on either type of drive
thewheelman282 Alright, thanks for the information!
+Luis Rosa I know i super late but cant you just use dvd 2 xbox and put all your discs on the hd
Looking forward to p2.
i just wanna know if it helps fix a 05 and 06 error my xbox is 1.4 and i messed up my eeprom
[quote="stu2b2"]Hello I’ve Softmoded my Xbox then done a tsop now he’s the problem I can get it to show in hd/720p but when I got to play a backed up game ie xbox original game it loads up but I can not see it put the standard cable back in it work but with crap res so I go to settings it not pal bonus so go to ms dash it loads but now I can not see the standard dash now what is going on I’ve I tryed this every way I can please please help the only thing I can think that has changed is the tsop and uninstalling the softmod 🤯🤬
Hi, I have a question about the TSOP chip. In an effort to mod a 1.0 Original xbox, I apparently wired it wrong and cooked my TSOP chip. Is it possible to install a new TSOP chip and flash it?
It's possible but very difficult. You can either buy a new TSOP chip and flash it with a programmer and PC then solder it in or you can solder in a new blank TSOP chip and install a modchip and then flash the new TSOP with an xbox flashing tool.
@@thewheelman282 Thanks for the promt reply. I was attempting to install an Aladdin XT Plus 2 mod chip. The only thing I can figure is that I connected my DO wire to the wrong point. Maybe. My DVD stopped working, so that is why I was trying to mod it. Thanks!!
If I just want to put a larger hard drive in an Xbox do I need to do a TSOP?
The Xbox has to be modded in some way first. So either tsop, softmod, or modchip
Can you guess why Microsoft decided to lock Xbox's hard drive causing not to boot to BIOS due to error from Original Xbox?
Tsop flash or mod chip?
i say tsop when possible unless you have a chip with more features
is Tsop flashing meter i mean is there a difference on performance ?
Firas Dhouibi not really a performance gain. Just easier on the user
ok man nice work like and subs for you
I have xbox 360 can the tsop be changed for a new one mine will not flash erase so cannot put a chip out of a same version xbox360 board
modding a 360 is completely different than modding original xbox's. the info in this video will not help you mod your 360
Could you recommend me where to get a modchip it? I don't know where to get one and i'm scared of being scamed.
i think eurasia sells Alladin XT clones. they are a reputable dealer. but shipping takes a long time
thewheelman282
Joe Campos
You forgot to put a comment there buddy?
thanks for the video, it really helps to understand.. I'm trying to fix an error 12 in a soft modded crystall version which i suspect that is an 1.6... And the DVD drive just died in the same day ....
error 12 is DVD drive related. try reseating all the cables first
I've checked twice and even use another IDE cable, but no success. I'm thinking buy a mod chip to remove the DVD drive itself(no use for me) and put a larger HDD. Right now i'm having issues finding mod chip for xbox.. every site i visit is out of stock, or charges a lot for a mod chip. Do you have any suggestion?
go here for affordable modchips
assemblergames.com/l/threads/zer0-2k11s-mod-chip-and-installation-shop.43131/
they are migrating servers so the site is down right now but the guy that runs that thread is trustworthy
If you remove the dvd drive, can you pop in a second hdd instead?
its not possible. the xbox wont recognize it
Had a feeling that was the case. Thanks for replying.
unlocked my hard drive when trying to upgrade.Next day i turn on error code 5,Kek. Can anyone recommend a modchip
How about a mod chip install video for the v1.6 guys??
can do. i was planning this actually
Awesome. U just gained another subscriber.
thanks man. i appreciate it
I really cant seem to find modchips on ebay where should I go
assemblergames.com/l/threads/zer0-2k11s-mod-chip-and-installation-shop.43131/
the site is down at the moment. they are migrating to new servers. but chips are very affordable there
thanks ill keep an eye out
What kind of solder do I use
60/40 lead-tin with flux core is always a good choice but other metal mixes work too. dont use lead-free solder or acid core solder
Thank you
Doesn't the tsop let you alter the startup sequence?
Yes. More specifically, the custom bios you flash to the TSOP will let you do this with a config file.
Fact: newer computers use a UEFI BIOS
o meu ta dando erro 01 me ajuda
o q pode ser
First
So I was wondering how do u TSOP flash a v1.6 Xbox?
Lol jk