As they say: "Growing up is for kids..." Thank you for letting us join you celebrating your inner child and the utterly precious friendship you've got! (Not sure wheter I should be worried knowing that one of you is in command of a Boeing 737 for a living, but then, we all have our coping mechanims, haven't we? 😋) Can't wait for what you're going to come up next with!
@@TomOConnor-BlobOpera Even if you were right, that would be entirely their private matter, and none of our concern. (...unless, of course, you happen to have a crush on either of them...)
I am dying Why didn't i know this before... I was always trying to feel it in my hands to know what's heavier... Au least I know now that my Laptop weights the same as my PC. Why don't they work anymore🤔
Heat batteries take up less space than a hot water tank and can store heat for longer. They are based on latent heat storage; heat or electrical energy is used to change a phase change material (PCM) from one phase to the other (in other words solid to liquid) and this captures the energy. İt can be used in aircrafts maybe it can be a video's concept
Now this is really cool! Turning a bug/big oversight into a feature! That save at 9:05 was awesome! I'm a little confused, why did it perform worse with the single big battery and the big battery plus the two small batteries? I thought at first maybe the single big battery wasn't able so supply enough power for both motors at the same time, but with all three not working well idk what was happening.
I dont think it needs 4 motors though,sure it has thrust issues with reduced blades, but with some work remove the alternate blades from each end and you have one displaced dual rotor chinook.
Hook up the LED receivers so it only needs too see a signal from both or either LED. I was confused when I thought I didn’t see this this in my playlist, then I noticed the Tim instead of Tom lol.. Just now subbed!
If I was you, I would have used the little motor that provided forward tilt in the design. By only inverting one of them so that when you input forward tilt it actually provided thrust for tilt in the desired direction to provide forward movement.
These camera shots are very "home video"-esque, especially the close up zoom's on your face when he asks you a question lol. Thanks for the video!
I remember flying a chinook version I had back in the day. This one actually looks like it flies better. Nice job
Go for quad copter!
what about 8
It's called a drone
2 is fine!
ua-cam.com/video/OZn9Bt9o2oA/v-deo.html
@@TakanashiAme everything thats remote controlled can be called a drone
It already is, since it uses 4 sets of propellers and concentric shafts.
As they say: "Growing up is for kids..."
Thank you for letting us join you celebrating your inner child and the utterly precious friendship you've got!
(Not sure wheter I should be worried knowing that one of you is in command of a Boeing 737 for a living, but then, we all have our coping mechanims, haven't we? 😋)
Can't wait for what you're going to come up next with!
Fly at night and the ir works. You can take more weight off the shell lights. You can boost the fly time quite a bit
A few years ago when these IR micro helis came out, I had a Chinook version and it was actually brilliant. Can’t find them anywhere now.
Your brother turns everything into a comedy, but I'm not complaining...
Also seeing CAD work on a curved monitor just feels wrong.
Sam is his brother?!
@@alberthofmann420 Yes. The resemblance is uncanny, isn't it?
@@alberthofmann420 Highly unklikely, unless one of them changed his last name. 😏
@@j.q.higgins2245 I thought that was his boyfriend!
@@TomOConnor-BlobOpera Even if you were right, that would be entirely their private matter, and none of our concern.
(...unless, of course, you happen to have a crush on either of them...)
dropping the frame and the helicopter at the same time to see which was heavier killed me, i simply cannot, good sense of humor xD
Mass matters not in z falling of things
I am dying
Why didn't i know this before... I was always trying to feel it in my hands to know what's heavier...
Au least I know now that my Laptop weights the same as my PC.
Why don't they work anymore🤔
You just got yourself a subscriber
I didn't even know this channel existed even though I'm subscribed to Tom Stanton
It’s so funny how different the channels are but how much I enjoy both. Like steak then dessert:)
Alternative title: Tom and friend get surprisingly high.
I thought I would be happy after watching this.. But now I'm just angry at my parents for not giving me a sibling🤣Kidding.. This is wonderful!
Lego IR receivers have a bit of trouble outside with the sun where the controls would be delayed or sticky, probably same issue as the heli
As a small child, I saw dragonfly sex as a marvelous practise in balletic harmony. I never thought of emulating it quite like this!
Heat batteries take up less space than a hot water tank and can store heat for longer. They are based on latent heat storage; heat or electrical energy is used to change a phase change material (PCM) from one phase to the other (in other words solid to liquid) and this captures the energy.
İt can be used in aircrafts maybe it can be a video's concept
And it's cool 😎😎
3:57 optimal eye safety I see...
This one feels like a home video of two kids experimenting with their toys in the 90s
This plays like a home video, I love it so much:)
"Trim the helicopter."
*snips tail off*
"No, I meant trim the controls so that it flies level and... oh never mind this is better."
Winter is coming. And Spring is around the corner !!! - Robert
Now this is really cool! Turning a bug/big oversight into a feature! That save at 9:05 was awesome! I'm a little confused, why did it perform worse with the single big battery and the big battery plus the two small batteries? I thought at first maybe the single big battery wasn't able so supply enough power for both motors at the same time, but with all three not working well idk what was happening.
Probably just couldn't handle the weight.
Fun video! Can you tell me where I can find that NASA shirt?!?
Been using ones like these for a while now for messing around. 5 Below Helicopters are fire
the crappy red beer tells me all i need to know about this awesome video lol
WHAT?
Hey, where's your vacuum video gone? 🤔
(Subscribed anyway)
i love your goofy friend hehe. winters comming indeed
Would it be an option to I beam the truss? As in making the triangles thin and the top and bottom wider to loose weight?
Good for Tim getting UA-cam star Sam Barker
I dont think it needs 4 motors though,sure it has thrust issues with reduced blades, but with some work remove the alternate blades from each end and you have one displaced dual rotor chinook.
Watching old James Bruton is a great intro. When's the colab?
Certified tim station classic
Your life at 4:09 could have been much different sir. Might want to look into that
Awesome funny video guys. I will check out more of your stuff.
Crazy stuff, Tad Stamton
I love it when a new Todd Stetson video drops.
I love your videos!
Haha that was random and entertaining!
What was William Osman saying about helicopter 2?
Stupidly and childishly awesome 👍👍😂😂
No one:
Literally no one:
Drunk people with engineering experience:
Surprised how good this works
Pro tip: you can select the edges you want to fillet/round/chamfer/etc in one selection by changing the selection priority to edges.
Looks like two dragon flies mating.
2:05 that's a very strong shape.
Lets try it outside! *proceeds to find the hardest ground surface possible*
Dang we have the same wallpaper!
I was just thinking how I'm going to re watch 'Fusion 360 wing design', and bam new video! Thank you man!
no day better than when you upload a video lol
It flies more predictable when it’s chinooked up lol
You could maybe have improved the flight performance by making the bar between the two helicopters less of a hinder to the downwind of the rotors.
NASA - For adults who never grew up.
Great idea! 👍
you could get pitch control by leaving one of the tail motors attached somewhere off-center.
No tail motors on these,they have counter rotating main blades for steering.
@@enoz.j3506 and tail horizontal props for pitch :)
@@mleko5procent Ah, i didn't see that,im not familiar with these little copters.apologies.
Honestly, I think you amuse Gravity...
what a sweet little chook
Priceless reactions
That worked far better than it had any right to! XD
Cool, thanks Tom.
Dang now I really wanna buy one of those crappy little helicopters.
I have the same NASA Shirt but it’s white lmao nice!!!
Double tandem war copter.
This was really fun!
Started with helicopters, ended with Game of Thrones. Great.
Now connect 3000 of them and fly away.
so this is what tom is up to
It looks like dragon flies mating
💀
Oi! Talvez seja a luz do sol que faz com que ele caia durante o voo.
Hook up the LED receivers so it only needs too see a signal from both or either LED.
I was confused when I thought I didn’t see this this in my playlist, then I noticed the Tim instead of Tom lol..
Just now subbed!
They sound like Fnaf screams
1:36 That bit was like a scene straight out of The Office
is that his brother?
If you don't have some or haven't tried it yet get some light weigh PLA. The stuff is amazing.
pure shitpost, love it
Two childs with an engineering degree
The Icaruscopter
Have you ever used the web function in fusion?
Cool
i have this before, swap battry from bloated. fly in open space too high and missing is rice field😅
Tape > CAD, CAM, Engineering
Winter is coming
reminds me of lovebugs
since when was ur name tim
Good
This guy reminds me of another UA-camr… Tom maybe?
Whats the point of a second active youtube channel ??????
Yeau!
This is peak stupid, I LOVE IT...
If I was you, I would have used the little motor that provided forward tilt in the design. By only inverting one of them so that when you input forward tilt it actually provided thrust for tilt in the desired direction to provide forward movement.
You may able to control those with an Opentx controller
You would need to build an IR module 😅
Those metal bars for the tail section just pull out no need to cut them off 👀 I've had quite a few of these 😆
I've been known to chase IR RC planes around when flying outside during the day due to the short range...I dont recommend it lol
Yeh, I like the regular format better.
minook
Fun fact: you don't need to make cutouts for 3d-printed parts. They're gonna be infilled anyway. And it will be more weight/strength efficient.
I'm just curious; you guys consume "dutch vegetables", right? I'm not against it, contrary actually..
Spicy lettuce
Acer hollandia
Awh adult men acting like 12 y.o kids xD
at this point what i would do is add a JST connector female on the helis and males on the battery. no more 4 hour charging time.
💀
💀
💀