How to remove scratches or engravings from a Swiss Army Knife blade with just sandpaper

In this video i show you how to remove scratches or engravings from a Swiss Army Knife blade with just sandpaper. After that, your knife blade will look like new.
👉 Victorinox Online Shop: www.victorinox.com
👉 Links for my books, Swiss Army Knives and equipment below
👇👇👇
🇩🇪 🇦🇹 🇨🇭 Mein Amazon Shop: www.amazon.de/shop/feliximmler 🇺🇸 My Amazon Shop: www.amazon.com/shop/feliximmler 🇬🇧 My Amazon Shop: www.amazon.co.uk/shop/felixim...
➡️ Instagram: / feliximmler
➡️ Facebook: / felix.immler
➡️ Website: feliximmler.ch

[@theWZZA]

I was a boy in the 80's when all the Boy Scouts carried SAKs, and McGuyver was the #1 TV show. Of course, I was gifted an SAK in my youth. I got interested in knives 10 years ago, tried liner locks, lockbacks, etc, etc. Now I am full circle, carrying an SAK. They are just amazing knives. Period.

[@FelixImmler]

Thanks a lot for this wonderful story!

[@Lumpy_Peter]

Same with me. You should go and search KnifeCenter channel on UA-cam and watch their latest short video called 'Four stages of knife addiction'. I think you may find it hilarious.

[@michaeldubinski1375]

Full circle! 😅

[@randymartin5521]

I had an old Boy Scouts knife similar to a SAK, long spear blade, awl, bottle opener and can opener when I was a kid but moved on to jack knives and stockmans as I grew older, then began getting into Benchmades and Spydercos. Thanks to you, Felix, and a few others on UA-cam I finally bought my first SAK, a used but excellent Tinker, on eBay about 5 years ago. That led to a Camper and then a couple of alox models. They are all now part of my normal rotation and I carry the Tinker most often.

[@susanp.collins7834]

Here in South Africa I can get a Victorinox Camper with a saw for R600. A Leatherman with a whole load of gadgets that I will never use will cost me over R4000.

[@tjarsun]

This video came in just in time for a restoration!
FYI: the grits Felix used are 120 - 240 - 400 - 600 - 1200 - 4000 - polishing compound

[@FelixImmler]

Thank you very much!

[@trumanhw]

That was my EXACT question. But I also had one more ...
did he use adhesive sandpaper..? How'd it to stick to the table..?
(also, I bet after the lansky it'd cut paper nicely: Shoulda shown it!!)

[@cameronmimnagh4395]

@@trumanhwdid you watch the video completely? He used an adhesive spray on the back of the sand paper.

[@dennispedicone5125]

I think I've seen just about every video that you made and I learned so much from you. You are my favorite person to watch.
Thank you for everything and please, never stop posting videos.
Sincerely, Dennis Pedicone

[@FelixImmler]

Your comment makes me happy. Thanks a lot!

[@kenrobertson7053]

Another educational video and challenge to try. I have been buying SAK's at flea markets and gun shows for years, cleaning them up and giving most of them away to friends and their children. I try to buy the ugliest ones, with sticky blades which are hard to open and usually just need the patience of a good cleaning and sanitizing. I often get a good deal by buying 2 or 3 of the ones the vendor will likely never sell. I usually just clean the scales and clean and sharpen the blades, but haven't tried sanding and polishing the blades so I'll try that next. All great fun, and even more so having watched so many of Felix's tips and tricks. His enthusiasm is contagious.

[@FelixImmler]

Thank you so much for your wonderful story!

[@godofmyworld77]

Felix knows is stuff...my go to channel for all things SAK 👌🏻

[@stephenwright3501]

I admire your patience and your work ethic. I'm afraid that I would be too strongly tempted to just buy a new one, than work that hard. You are an inspiration.

[@FelixImmler]

Thank you very much!

[@CSGraves]

Polishing a blade up is pretty rewarding if you can muster the patience. I find it helps to either queue up a few hours of music or youtube videos to last through the job.

[@DanEvans-yb6wk]

Yes, you could buy a new one, but if the space and tools are available, great joy and a sense of accomplishment can be found in restoring nearly anything. Cheers!

[@willikebari5478]

Hallo Felix, als Metaller kann ich nur sagen: "Toll gemacht!"👍 Mein ältestes und liebstes Victorinox ist bereits 45 Jahre alt und immer noch viel im Einsatz. Es hat eine Menge Kratzer und auch die Griffschalen sind natürlich schon mit Kerben übersehen, aber ich lasse es so wie es ist. Jeder Kratzer ist eine Erinnerung an meine Jugend und erzählt eine Geschichte über einen Teil meines Lebens. 😊 Ganz liebe Grüße aus Wels nach St. Gallen und ein schönes Wochenende für dich und deine Familie!

[@FelixImmler]

Ja natürlich... das musst Du unbedingt so lassen! Ich meine nur wenn Du auf dem Flohmarkt ein Messer kaufst und da steht Horst auf der Klinge oder so... 🤣

[@willikebari5478]

@@FelixImmler Da muss ich mich entschuldigen lieber Felix!😟 Ich hoffe du hast mich da nicht missverstanden, denn ich wollte dich da keineswegs kritisieren, ganz im Gegenteil! Deine Art die Klingen von Kratzern und von Gravuren zu säubern ist absolut klasse und richtig!👍 Auch für neue Messer und für Sammlerstücke sehr geeignet und empfehlenswert. Ich mache es ja auch so ähnlich bei meinen Sammlermessern.
Nur halt bei Messern, die mich schon sehr lange begleiten und denen auch sehr alte Erinnerungen anhaften, die lasse ich so wie sie sind, mit allen Kratzern. Eine Art "Patina", die eine Geschichte erzählt (so wie meine Falten im Gesicht😄).

[@jimmychristensen498]

​@@FelixImmler fals da Horst stande, würde ich es so lassen hahaha

[@AndreasGassner]

@@FelixImmler sag es aber nicht dem Horst 😅

[@ShannonRamos]

I was polishing up an old SAK today, I learned a lot from your video. Polishing the plastic scales is fun because it brings back the luster even if they have deep scratches and knicks so it makes it feel like a shiny "new" used knife. I proudly enjoy carrying the older knives I bought and restored because I treat them less delicate than I would a brand new SAK, which to me is like a small work of art I do not want to scratch or muck up.
I have only one Victorinox sheath for larger knives and a few little leather slip cases for my small knives like the Excelsior/Secretary. I was thinking of an idea and would love to see you make a video(because I'm sure you would make it amazing) of how to make leather slip case that wraps around with the inside loaded with stropping compound or a sheath with a side compartment for a Victorinox Dual Knife Sharpener. Keep up the great work.

[@FelixImmler]

Thanks for your inspiration. I need a sketch from your idea...

[@ShannonRamos]

@@FelixImmler I sent you a email with a sketch.

[@germanshepherd13]

I find it relaxing

[@ToddSikking]

Terrific video! I love those Lansky sharpeners...it's the only way I feel confident about obtaining the correct edge angle. I like the technique of sticking the sandpaper to the tabletop, thanks for sharing!

[@FelixImmler]

Thanks a lot for your interesting feedback!

[@edwardfletcher7790]

All of your mods and techniques are so perfectly thought out, thank you Felix 👍😆

[@saidutube]

Thank you for this complete guide to restoring a bade. I received a used Swiss Army knife as a gift recently and was a little saddened by the botched attempt to sharpen the blade. There is hope!!!

[@FelixImmler]

Super! good luck!

[@darioroldan1891]

Felix, excelente presentación y ahora esta la traducción tipo sub título en la parte inferior de la pantalla! Ahora vas a tener muchos más seguidores en español! Un gran saludo desde Argentina!🇦🇷

[@FelixImmler]

¡Gracias por este comentario positivo!

[@edzkn]

The best channel for swiss knives! thanks for the content

[@Hammerback972]

My dad passed away in December and in his belongings, I found a fixed blade Case XX model 223-6, someone had attempted to sharpen (I guess? Never seen so much damage, dad wouldnt have done that) since it was so shiny, i thought it was destroyed. Well, i dont know how many hours i have in it using your method, but the knife looks almost as good as new. I used 220, 400,600,800,1000,1500 grits. Gave me something to do and think about my dad. I appreciate you sir. I miss my dad.

[@vtxdaryl]

Thanks for making this video, I love watching you polish knives. Great job.

[@FelixImmler]

Thank you very much!

[@renem.3413]

Dear Felix,
YOU are still my one and only hero regarding "all about and more regarding SAK."
Best regards from Friesland to Switzerland
René

[@FelixImmler]

Hallo Rene... vielen Dank!!!

[@motrock93b]

I tried these methods on a Climber with a scratched main blade, which has sentimental meaning to me. It turned out beautifully! Thank you Felix.

[@charlesmckinney]

Hey Felix I finally got my Trekker. Naturally it was the one with the serrations on the front of the blade. That thing cut like a son-of-a-gun. But the Chisel grind caused the blade to dig in so deeply I couldn't even make shavings or feather sticks with it. I re- profiled it into the smooth edge and now I have another great knife. You the man when it comes to Swiss Army knives

[@FelixImmler]

Thanks a lot for your interesting comment. Exactly your problem is topic of one of me next videos!

[@chris_stacey]

The GOAT of SAK! 🙂

[@FelixImmler]

Thanks a lot!

[@SirPrancelot1]

Great work Felix. Thank you for sharing your method!

[@FelixImmler]

Thanks a lot for watching!

[@Hungrybird474]

Many would argue that they look better beat up Felix, but some knives. We just like to make it look very nice and lovely.❤

[@FelixImmler]

True...

[@AdventureLife-rp8el]

You are really an artist, I really appreciate for sharing your knowledge.

[@FelixImmler]

Thank you very much!

[@planb4252]

have an old SAK from my time in the german army, 38 years ago, with marks from the grinder. i did'nt believe it was was possible to repair that. now i will try. thanks for the video.

[@DanEvans-yb6wk]

I've been making Comanche style hunting knives from leaf springs, broken dozer blades, and so on for years. The most arduous part of the making is getting all the scratches off what was once a rusty piece of steel. Your demo, especially the sanding method of mounting course to finer grades of sand paper should save me hours of work. We share many opinions, especially the wet/dry sanding methods. My heartiest thanks to you, kind sir.

[@tj-kv6vr]

your a craftsman, be proud

[@FelixImmler]

Thank you very much!

[@archivist17]

I can see several parts of this process where I have been going wrong in the past. Thanks Felix!

[@FelixImmler]

There is always more than one correct solution.

[@Mr1Alex91]

Thank you Felix, just ordered a few old case knives that are in pretty rough shape, I’m gonna use this technique to get the scratches out of the blades 👍

[@cyberlaurent2101]

Thanks a lot. Congratulations from Paris.

[@hanspeterlippkau2642]

Moin. I am Age-π.
You are much, much better than Mac-Gyver.😂😅😊
I enjoy your videos.
Wer hatt's erfunden?
Die Schweizer...

[@FelixImmler]

Danke Hanspeter!

[@WayPointSurvival]

Great tip, my friend! Thanks so much for the video and I hope you have a great week!

[@FelixImmler]

Thanks a lot my friend i wish you the same..

[@WayPointSurvival]

@@FelixImmler You're welcome!

[@joeytomato]

Never seen a blade quite that shape on a Victorinox before... Has a much for sweeping belly than all the ones I own. Neat!

[@BladeWalker77]

Grazie Felix, always good lessons from you

[@FelixImmler]

Thank you very much!

[@mikemcguire8351]

Great job. I've made a lot of belt buckles out of stainless steel pipe and I still get excited when I start final buffing. Have a great day.

[@FelixImmler]

Thanks a lot for your interesting comment!

[@paullambert4445]

Thanks. Nice polished finish. I use a hand rubbed finish on all my restorations.

[@FelixImmler]

Thanks a lot for your interesting comment!

[@victorlopezescudero2139]

Gran video, mantenimiento y cuidados maestro para Victorinox, Gracias F.H. 😊

[@FelixImmler]

Thanks a lot Victor!

[@MST-ph2ky]

Hallo Felix, ich mache es beinahe so wie Du es zeigst.
Nur das ich, ab 400-600, Nass schleife.
Und anschließend mit 2-3 Polierpasten arbeite.
Völlig verhunzte Klingen bringe ich vorher mit einer feinen Feile in Form.
So habe ich mir klasse Schnitzmesserklingen herausgearbeitet.
Victorinox is the best🤘🏻

[@FelixImmler]

Wowww, danke für das super interessante Feedback!

[@ironman2326]

Thanks for posting this! I've been wanting to remove some scratches from some of my Wenger knives.

[@FelixImmler]

Super! good luck!

[@unclescipio3136]

Felix, I've had my Lansky for 30 years and I never thought to put tape on the blade when I use it. You're always teaching me new things.

[@FelixImmler]

Thanks a lot!

[@jamessotherden5909]

Those are nice looking blades at the end. Thanks for sharing.

[@FelixImmler]

Hello James. Thanks for watching!

[@nauticalknotcraft]

Great video as always. I 've been using this method for many years, with excellent results. Thanks for the tutorial. Bravo.

[@FelixImmler]

Thank you so much for your feedback!!!

[@MichaelR58]

Good instructional video Felix , thanks for sharing , God bless !

[@FelixImmler]

Thanks a lot dear Michael!

[@alexandermichelmann6746]

Super Video. Leicht verständlich und gut vermittelt.

[@FelixImmler]

Hallo Alexander. Danke für das Lob!

[@stressmaster5000]

Awesome result! Great video.

[@FelixImmler]

Thank you very much!

[@tonynapoli5549]

Thanks Felix your a wizard great all the time 👍👌

[@FelixImmler]

Thanks a lot dear Toni!

[@s_antony_p26]

Идея с наклеиванием наждачной бумаги на стол понравилась! Хотелось бы увидеть как Вы реставрируете рисунок креста на накладках.

[@FelixImmler]

Thanks a lot for your comment!

[@richardmacyczko1580]

Thank you Felix. I love to bring an old tool back to life. My father called them, 'old friends." This episode, ⭐⭐⭐⭐⭐

[@FelixImmler]

Thank you very much Richard!!!

[@twatmunro]

The only thing bringing my old tool back to life is a little blue pill.

[@richardmacyczko1580]

@@twatmunro HA1

[@jerrystark3587]

It is good to remember that, with Swiss Army knives, you are working with very durable stainless steel. Hence, this is an excellent and useful tutorial.
Thank you! 👍👍
Best regards.

[@FelixImmler]

Thank you very much Jerry!

[@568843daw]

Excellent video! Thank you.👍

[@FelixImmler]

Thank you very much!

[@krazmokramer]

Thank you Felix! I recently purchased a used 1973 Buck 112 in very good to excellent condition. I put a KME edge on it, but the blade has several scratches from use. I am debating whether or not to remove those scratches. On the one hand, no scratches look fantastic. But on the other hand those scratches are like wrinkles on a person's face. They are the life history of the person or the blade. But whatever I decide to do, thank you for providing me with the knowledge to do it.

[@FelixImmler]

very nicely said. You are right!

[@ThePiotrHandjob]

Wow! Thanks for this useful tip 👍

[@FelixImmler]

Thank you very much!!

[@johnwyman5939]

Awesome Job on video and Nicely done!! 🇺🇸🇺🇸🪓🔪👍👍

[@FelixImmler]

Thank you very much!

[@ostekuste3646]

Honestly Felix, you are so upbeat and enthusiastic it would make me happy listening to you read IKEA assembly instructions 😂

[@FelixImmler]

🤣🤣🤣

[@scenicdriveways6708]

Hello from Kentucky (USA) Felix,
Great tips. Thanks for sharing them.
JT

[@FelixImmler]

Thanks for your weekly support!!!

[@lewisward4359]

Thanks for making the video.

[@FelixImmler]

Thanks a lot for watching!!

[@jhebert4055]

Subscribed! Love your videos.

[@edgaraquino2324]

Good video, Felix! Thank you for your tips & techniques...most informative & delivered in your classic, friendly style! 😊 You took an "ugly duckling" & turned it into a "swan"...Great!

[@FelixImmler]

Thank you Edgar!

[@edgaraquino2324]

@@FelixImmler you are most welcome!

[@will.scotnativeingreece]

Hi Felix, another informative video i enjoyed watching, great stuff! Cheers Will.😊😎

[@FelixImmler]

Thanks a lot dear Will!

[@sosteve9113]

Looks like a brand New now,nice work Felix

[@FelixImmler]

Thanks a lot Steve!

[@sibylle_p]

Amazing job. Thanks.

[@FelixImmler]

Thanks a lot!

[@Jasny311]

Bardzo fajny film.Swietnie pokazales podstawy,ktore powinni znac wszyscy.

[@FelixImmler]

Thank you very much!

[@MrBearbait75]

It's lots of work but sure is worth it when it's all done; nice and shiny! 😀

[@kurtrussellduldulao7958]

Thanks, Felix I really need a guide like this since I bought an old Wenger ranger which has scratches in it.

[@FelixImmler]

Super... that makes me happy!

[@lostfound8112]

Nice restore job on the victorinox

[@FelixImmler]

Thank you!

[@udoweigel2673]

Good Work,well done

[@FelixImmler]

Dankeschön!

[@johnduffy6546]

You are incredible

[@FelixImmler]

Thank you!

[@schmanto313]

thanks for the useful video! tape the ricasso with painters tape if you don‘t want to scratch it. I even use this trick when I sharpen my knives sometimes.

[@FelixImmler]

You are right! Thanks a lot for your hint!

[@micugly5391]

Felix Victorinox sollte dich als Mitarbeiter einstellen 😉👍🏼 du bist so eine gewiffte Person du wärst für die eine Bereicherung ! Ich wünsche dir ein entspanntes und schönes Wochenende ✌🏼

[@FelixImmler]

Vielen Dank für Deinen super netten Kommentar!

[@stevenkeithley4336]

Really enjoy your videos very insightful. Keep'em coming bud. Hope you and your family are doing great. Stay safe and be well brother. 👊😎🤙🍻🇺🇸

[@FelixImmler]

Thanks a lot Steven!

[@DaniloAMViana]

Very nice video, my friend. As always.
Best regards from Brazil!

[@FelixImmler]

Thank you so much Danilo. Are the portuguese subtitles okay? make they sens?

[@DaniloAMViana]

​@@FelixImmler honestly, I didn't know that was an option. I use to watch your videos without CC.
But I'm watching again and they seem pretty good.
Only the "flea market" translation doesn't make much sense, as it was literally translated to "mercado de pulgas", it's not a term we use in Brazil. Who doesn't know the English origin of expression can be a little lost.
We use to call it "brechó" or "topa tudo" (at least in my region, in southern Brazil they call it "brique", but I guess they would understand the term "brechó") or you could just change it a little for "comprar de feirantes" that would be "buy from marketers".

[@Paule.S]

Super! Einfach eine Freude die Felix Immler Videos….❤❤❤
Wenn’s dann ganz verrazt ist zum Vic Service senden, ist sensationell 😊

[@FelixImmler]

Ja klar..daran habe ich gar nicht gedacht....

[@larrybednaro1706]

Great Information.

[@johnburns748]

Great video 3M pads also work real well 👌

[@FelixImmler]

Yes i think so!

[@CSGraves]

Another alternative to a buffing wheel: a piece of boxboard with stropping compound on it. Treat it like you would a piece or high grit sandpaper.

[@FelixImmler]

Super idea!!!

[@bogdan_d82]

Great job, thx for the advice!

[@FelixImmler]

Thanks for watching!!

[@chrisbyars4422]

Um das Metall zu polieren benutze ich entweder Wenol oder Flitz. Klappt prima. Danke für das Video. Wieder viel gelernt in einem kurzen Video!

[@FelixImmler]

Das freut mich. danke für die Rückmeldung.

[@Frantxis]

Gran trabajo 👏🏽👏🏽👏🏽, yo necesito hacer eso con alguna de mis navajas, un saludo

[@FelixImmler]

Thanks a lot for your comment. Good luck!

[@QuantumMechanic_88]

Thanks Felix. Your lessons and advice are always appreciated. Respect sent.

[@FelixImmler]

Thank you so much for this roses!

[@MutsPub]

Thank you.

[@FelixImmler]

Welcome...

[@Astroarno]

Wieder eine schöne Anleitung🏆! Der tipp mit dem Richtungswechsel beim Körnungswechsel ist super. Und eine Kleinigkeit nebenbei: Das Isolierband vor dem Einspannen in die Schärfvorrichtung werde ich zukünftig auch nutzen👍
VG 🙋‍♂

[@FelixImmler]

Herzlichen Dank für dieses tolle Feedack!

[@willowufgood1254]

Thanks 😊

[@FelixImmler]

Thanks for your support!

[@davekelly9657]

Hello and thanks for sharing this with us. You are the MAN 🎉🎉👍👍⚓⚓🇺🇲🇺🇲

[@FelixImmler]

Thank you so much Dave!

[@serkanakca8142]

great.

[@fivesfish]

Great idea. I am going to try this on my Leatherman knife which has terrible georgia engraving. You can't beat a Swiss Army Knife for quality.

[@FelixImmler]

good luck for your project!

[@fivesfish]

@@FelixImmler Thanks.

[@2371Anita]

Have you tried the worksharp precision adjust sharpener? If not, you should! It works awesome.

[@FelixImmler]

Thanks a lot for your hint!

[@janrobertbos]

NICE!!!

[@FelixImmler]

Thanks a lot!

[@jimmy66603]

Hi Felix. Great tutorial. I've got a Higonokami. The blade is blue paper steel. The only thing that i don't like is the visible leftover grinding lines. Would your sandpaper method remove the scratches/grind lines from this blue paper carbon steel? Any advice would be much appreciated Sir 🙌

[@lisuk66]

👋🔥✌️ Hello, Felix. Thank's a lot 👍👍👍!

[@FelixImmler]

Thanks for watching!

[@robersonrochasantossobrinh8449]

Show, congratulations

[@FelixImmler]

Thanks a lot!

[@gregcushing1716]

Thank Yeww Sir

[@user-yb2jr4md1h]

good....

[@maschi1294]

Schönes Video einfach aber gut!

[@FelixImmler]

Danke für das Lob!

[@John..18]

I've recently got an Alox Bantam, and the blade rubs on the "multi tool" every time I open and close it,, I've tried grinding and polishing the "multi tool" in the exact spot which is causing the problem, but it's not improving things,.. Every time I open the blade, my eyes are drawn to the scuff marks, !! I've never had this problem with any other of my Victorinox knives,,.. I also have the red plastic Bantam, and that is perfect,, !! Any idea's,,??? Great video Felix,, 👍👍

[@FelixImmler]

You should send me pictures from this problem...

[@John..18]

@@FelixImmler
Ha ha, after watching this video, I've been sat here, polishing the blade, on a strop, to get rid of the scuff marks,, ha ha,, I'll send you pictures soon, 👍👍

[@schwarzwelder]

Always great to see the results you can achieve with simple means if you have the know-how, the skills and the patience. That Wenger came out a beaut! Thanks a lot for sharing.

[@FelixImmler]

Thanks a lot for your kind feedback!!

[@j.l_vqtqv9908]

Muy buenas, Félix amigo mio 😉 veo que esta técnica deja el acero sin arañazos 👌y pudiéndolo se queda a espejo gran trabajo como siempre 👏👏👏😃 gracias por compartir salud/os desde 🇪🇦

[@FelixImmler]

¡Gracias por los comentarios súper agradables! si, eso funciona muy bien. Hice subtítulos en español. ¿Son buenos?

[@j.l_vqtqv9908]

@@FelixImmler los subtitulos se entienden bien 👍

[@woifmachatch2101]

Nice video, all makes sense, but the music is a little too loud.
Also, what type of polishing compound did you use
Cheers

[@andrijadjokovic7248]

Hi can you please tell me where do you find these cheaper knifes with logos and promotions on them

[@pnyarrow]

JHi Felix. Das war ja toll. Jetzt muss ich noch feiner 'sandpaper' kaufen. Bleib gesund. L.G. Nigel

[@ddblairco]

thank you Felix. I can't understand what you said at 3:21, could it be replace the sandpaper after it wears out?

[@FelixImmler]

Yes exactly! by the way ...I always write subtitles

[@peterappleton5213]

All hail Felix, the SAK guru

[@FelixImmler]

Thank you Peter!

[@joaquimrasi6822]

Another great tips & tricks video. Thank you for sharing your knowledge 😊 Greetings from Norway 🇳🇴

[@FelixImmler]

Thank you so much for your weekly support my friend!!!!!!

[@marmite8959]

Keep up the good work Felix, your videos always make me smile 🥰

[@FelixImmler]

Thank you very much!!!!