I only recently heard of this WTFOS, I'd love to get the overlay but I had already upgraded to the recent .07 firmware in my v2 goggles. Am I stuck now? Can I not get WTFOS?
@@alperenozgur Sure, would be nice everywhere, but the supreme court of the US ruled decades ago, that car and appliance makers couldn't do stuff like this, because we had constitutional right to fix/repair/modify things we purchased, then suddenly that was no longer the case, the ruling is just ignored.
@@fordcrews3362 Let's hope that things finally move forwards. With the EU enacting some regulation regarding this stuff I hope that it will become a gkobal thing eventually.
This week I built the first drone with a caddx vista digital system, thanks to your video I was able to root the goggles and the air unit lite. Yesterday I managed to update goggles to the latest version of sw and keep wtfos working. Many thanks to everyone involved in the project! A hug from Brazil 🇧🇷 to all!
It works for me. I just did it for my V2 goggles that was on the 0606 firmware. Then I installed the wtfos on 1 of my Vista units and did a test flight. It's nice to have my LQ, throttle position and cell average voltage again. Now, I THINK, I can bind to my new 03 Air Unit and still go back to the Vista and still have the OSD on the Vista units.
WTF the Butter is not working for me...I got all right up to rooting both then i BF 4.3 is not letting me. So writing down this I realize it maybe cuz I need to update BT to 4.4 so get OSD. I did all the setting changes he shows but the only change was the osd waiting sign at the the beginning and something about a bin and then no osd only the dji. Strange because Custom osd is off. Any help would be great.
The drone assembled by me and the dji fpv drone are working in full harmony and without the outdated sw message from the fpv drone. Thank you very much, everything works great!
Hello, I have a problem connecting. It always says "waiting for any device". I've already used 5 different cables, all ports have been turned, oh yes, I've turned them all.... What else can I do? Thanks
I followed these instructions to a T and it always resets. Im doing it to do the 1200mw hack. When downgrade it and root everything, my menu changes to the old one like its supposed to. I also installed the 1200mw hack through WTFOS but it wont let me switch the output and is on 25mw. It also has it set for the DJI FPV and not the Air unit so when I switch it to the air unit it resets the menu to the most recent. Am I doing it wrong?
So i have this problem. 😅 I haven't used my dji fpv in a looong time and recently, I forgot to turn off airplane mode while connecting my goggles to my phone to let other people see my flight via the dji fly. Is there a way to bypass this firmware update requirement?
I apologize up front, for this question is most likely not attributed to having upgraded to the latest V2 firmware (v01.00.0607). My DJI Unit has the latest firmware, and when I put into bind mode it appears to be in position for binding with the v2 goggles. The v2 goggles unfortunately won't go into bind mode. No beeping at all, not even one beep. I've gone back and forth between FPV mode and digital FPV system (ending there because I want to bind with air unit, right?), power cycle, and still no beeping. I know I've got the process down, just can't figure out if I'm missing something fundamental- or maybe I have a faulty pair of goggles. And I don't think the downgrade would correct anything. Thoughts? Thanks in advance for (hopefully) fielding my question. Take care.
All these youtubers say "in the video description" and then its not there. However you are usually good about doing so. I just feel like every time that i actually go to some ones video description to find something....anyway, sorry just ranting, this is not directed at you Ian! 😁
Thank you so much for putting this instruction tutorial together. I was going to see about doing the root hack since I heard that it could be done on any FW, but I was not quite sure what to do. You just took care of me having to search around for what I needed. ❤
any reason to why the application won't start after connecting my goggles. My computer sees they are connected and DJI Assistant 2 also sees the goggles are connected, but the screen still says "Waiting for DJI Recovery device to enumerate.." and nothing is happening. My goggles are on 01.00.0607
hi, I did everything you explain in the video and it worked perfectly, I have a dji O3 and Dji air unit, so at the end of the whole process as you suggested, I went back to the latest firmware version in the goggles, but everything i had done was erased, any help !!!
Can you show a video displaying the osd in Betaflight and in the goggles , I am confused If i move an object in the betaflight window, eg GPS top right corner, It puts that icon bottom left in my dji goggles. And yes its selected HD and my goggles are set to 16.9. Just nice to see your not having the same issues.
Thanks Ian for this video, quick question, is there anyway to get rid of the DJI OSD?? I know you said to turn off custom OSD in the goggle menu, which I did, but the goggle and air unit symbol are still there as is a couple other elements, as they stayed on your screen as well, in your original WTFOS OSD video, after you turned custom OSD off. I take it we're stuck with those few small icons, and just have to adjust the Betaflight OSD around them?
Do you ever find when you power on your quad sometimes the DJI FPV goggles V2 will stay stuck in low power mode, then you have to replug the quad in to get it working?
I followed instructions got the osd displayed on beta flight but my dji transmitter stopped comecting treid everything ended up having to plug air unit into dji app and updating everything to get it working amyhelp
After downgrading the goggle v2.. and getting compatible to bind with each other... with the vista.. can I reinstall wtfos without any problems with capability with 03 and vista?? Cause right now I have no canvas mode on either vista or 03?
I ran butter after completing, I went on to WTFOS configurator. Unknown device Device connected - checking for ADB, this can take up to 30 seconds... Failed detecting ADB, please (re-)root your device! What do I do? I think Ive bricked my goggles
Hello Sir! Short question: When this whole downgrade/root/WTFOS install & flash process is completed, can we still install newer firmware via DJI assistant 2 without loosing root/WTFOS, or would a firmware refresh via DJI reset all "hacks"? Thanks
Hello, I have goggles 2 and it cannot root. The options are for V2 and v2 goggles, I would like to know if it will be possible to root in the future or if this possibility already exists. I would like to install wtsf. many races
I Have tried the software on two different computers both running 64 bit with no luck, I have also tried different data cables, I can not get the software past (Waiting for DJI Recovery device to enumerate) at this point I am willing to just but some goggles that are running the older software will this work on just swapping goggles? or will DJI force me to update? FPV running 01.03.00
@@MadRC I think I figured out what is wrong. The GPS is no longer talking to the flight controller for some reason. I have to figure out why. This happened after I replaced the analog camera with the o3 air unit.
I’m having issues with mine. It’s worked great to root and install WTFOS however…it’s missing the option to switch to DVI Avata. Connect to DJI assistant and it upgrades goggles. Then it appears but no WTFOS. Connect to FPV site and it says FIX. I do that and OSD back on but no option again to switch to Avata. Any ideas?
I did this a few days ago before this video and followed all the same steps. It’s strange as after the fix it just gives the option to switch to FPV mode only and not the 3 options. Then I get a mismatch on DJI Assistant so it updates firmware to latest which is fine. But same loop. No WTFOS until I fix etc…
@@MadRC Awesome thank you. I did just that and they sorted me out. Had to re-run butter, use some CLI commands to copy Slot 2 to Slot 1 and then given the option “Slot 1 is corrupt” and to fix that. That sorted everything. Reinstalled WTFOS and all running perfect. I should’ve just bought the Goggles 2 😂
Any news of this root/software coming to the goggles 2? Would be nice if the new goggles could work with both air unit/vista and the o3 like the v2 can.
@@shambler01 oh that's right. But once you update the vista/air unit so that they can work with the g2, they no longer work with the v2 goggles 😭. Can't help but feel like DJI is doing this maliciously for people who need to use audience mode
Awesome Bro...can we downgrade after we upgrade firmware to use goggles 2? If yes, after downgrade, can we bind air unit to DJI goggle V2? please advice..
u where always able to do that, but its nice to now have like a last resort now, where if anything goes wrong, brick or loss of root, some funny business, you can always use this downgrade tool to sorta "reset to factory settings", then try again with root and upgrade stuff
However after installing WTFOS root air units can not be updated to the latest (ie for goggles 2 update). Only way to update is to uninstall WTFSO root.
Great video as always Sir. But I have a question. Can I update my V2 goggles to latest FW (bc when I'm using them with de DJI drone, there's a sign that says that they're not in latest FW and that is annoying) I already did the root a few months ago and it's working very well. Hope you can help me. Cheers
This is great news. I have a question about this rollBack of the firmware. Does it also rollBack the droneMode firmware in the goggles, or just the airunitMode firmware?
@@QuadyMcQuadFace Yes sorry, i wrote my question a bit weird. I meant the goggles have a fpvDrone function and an airUnit function. My goggles are in fpvDroneMode on v01.03.0000. Does Butter RollBack this firmware or only the v01.00.0606? I dont fly airUnit, just the FpvDrone from DJI. I just want to do the fccHack on it.
@@TheCatFather01 Yes sorry, i wrote my question a bit weird. I meant the goggles have a fpvDrone function and an airUnit function. My goggles are in fpvDroneMode on v01.03.0000. Does Butter RollBack this firmware or only the v01.00.0606? I dont fly airUnit, just the FpvDrone from DJI. I just want to do the fccHack on it.
I'm pretty sure rollback will work with any version. If not get latest and greatest firmware for goggles and that should be able for firmware rollback.
uhm, i just tried to root, it said my device might not be compatible, so i did the butter thing then tried again and its still saying step 3 instead of step 4 failed this time? anybody?
bro, can anyone help "country code not update" FM update V2.1.15 I'm having this problem on air unit 03 to goggles g2, it's been refreshed & re-installed at the same time on the newest DJI Assist 2 it still doesn't go away and I've followed the suggestions from DJI Status G2 to connect the DJIFLY apk with GPS above 12 but still no response and firmware update from DJI FLY and the message doesn't disappear.. is there a solution? I've been repeating the method above for days but I can't... it's really sad...
This error is hitting a few people. Right what I have seen to resolve it is perform a full system reset with everything on. Then go outside and connect the fly app to your goggles and ensure it all connects had your gps location. You also need to be logged in on the fly app and allowing location data.
@@MadRC Thank you sir... I really understand this problem because you have given a good explanation.. finally I am confident again to do it step by step and repeat it again..
now this problem has been resolved 🥰🥰 even though it failed several times because the unit was hot..
I used to always open discord and search for "0015" to see if there is any movement, i was like 1 day late, when i saw it, didnt go to bed, ran the exe without hesitation 😂, they deserve a nice donation from everyone
It simply does NOT work :(( No matter which USB-C cable I use, or which port... it doesn't find my goggles (DJI V2). I did all as you sad, but without recognition, it does nothing :(((
@@cafub2650 I was finally eable to flash the firmeware of the goggle, but now, I have a new problem. When I start the goggles, I just see the language stettings and.. NOTHING reactes! No matter which button i press, I hear a beap but nothing changes or reactes?! :((
Hi everyone. Somehow the link got lost. It’s added again and it’s also here too
github.com/fpv-wtf/butter
I only recently heard of this WTFOS, I'd love to get the overlay but I had already upgraded to the recent .07 firmware in my v2 goggles. Am I stuck now? Can I not get WTFOS?
What is the status of using WTFOS with the new O3 Air Unit?
Anti roll back should be illegal in all electronics sold in the US.
"World" dude.. You are not only ones living on this planet. Accept it already; it's been 250 years lol..
... no, should be illegal everywhere
@@alperenozgur Sure, would be nice everywhere, but the supreme court of the US ruled decades ago, that car and appliance makers couldn't do stuff like this, because we had constitutional right to fix/repair/modify things we purchased, then suddenly that was no longer the case, the ruling is just ignored.
@@fordcrews3362 Let's hope that things finally move forwards. With the EU enacting some regulation regarding this stuff I hope that it will become a gkobal thing eventually.
But why though😅 so we cant do cool things like this?!
Thanks very much! I did no find the "link in the description" as you mentioned though... ☺️
Those WTF guys are legends. Hope they can do something about the 13km range limit
Yeahhhhh waiting this
+1
Wtf are you doing at 13km
@@DJZander303 meeting friends
This week I built the first drone with a caddx vista digital system, thanks to your video I was able to root the goggles and the air unit lite. Yesterday I managed to update goggles to the latest version of sw and keep wtfos working. Many thanks to everyone involved in the project! A hug from Brazil 🇧🇷 to all!
Hello for me the window runme failed with error #1 and I don't know what can i do
i have the same problem
Does this trick work for DJI v2 on dji o3? It is that I did the whole procedure and I cannot see the osd in the goggles.
It works for me. I just did it for my V2 goggles that was on the 0606 firmware. Then I installed the wtfos on 1 of my Vista units and did a test flight. It's nice to have my LQ, throttle position and cell average voltage again. Now, I THINK, I can bind to my new 03 Air Unit and still go back to the Vista and still have the OSD on the Vista units.
I know this is off topic but did WTF push forward with any video in through USB C so it can be used for simulators?
WTF the Butter is not working for me...I got all right up to rooting both then i BF 4.3 is not letting me. So writing down this I realize it maybe cuz I need to update BT to 4.4 so get OSD. I did all the setting changes he shows but the only change was the osd waiting sign at the the beginning and something about a bin and then no osd only the dji. Strange because Custom osd is off. Any help would be great.
The drone assembled by me and the dji fpv drone are working in full harmony and without the outdated sw message from the fpv drone. Thank you very much, everything works great!
can work on dji fvp drone ?
Just an fyi, You did not include the link to the butter page...
Hello, I have a problem connecting. It always says "waiting for any device". I've already used 5 different cables, all ports have been turned, oh yes, I've turned them all.... What else can I do?
Thanks
Have you gone on to the WTF Discord ? The guys will help you there.
Donate to these guys because what they did is incredible
I followed these instructions to a T and it always resets. Im doing it to do the 1200mw hack. When downgrade it and root everything, my menu changes to the old one like its supposed to. I also installed the 1200mw hack through WTFOS but it wont let me switch the output and is on 25mw. It also has it set for the DJI FPV and not the Air unit so when I switch it to the air unit it resets the menu to the most recent. Am I doing it wrong?
So i have this problem. 😅
I haven't used my dji fpv in a looong time and recently, I forgot to turn off airplane mode while connecting my goggles to my phone to let other people see my flight via the dji fly.
Is there a way to bypass this firmware update requirement?
Should make a video on how to setup FakeHD/ change the osd font
¡Gracias!
Wtf?
WTF.FPV guys did it again! Kudos to them!
do the same packages have to be installed on both the goggles and the air unit?
Excellent video, Ian! Thanks for all the info! 😃
Stay safe there with your family! 🖖😊
And merry Christmas!
I apologize up front, for this question is most likely not attributed to having upgraded to the latest V2 firmware (v01.00.0607). My DJI Unit has the latest firmware, and when I put into bind mode it appears to be in position for binding with the v2 goggles. The v2 goggles unfortunately won't go into bind mode. No beeping at all, not even one beep. I've gone back and forth between FPV mode and digital FPV system (ending there because I want to bind with air unit, right?), power cycle, and still no beeping. I know I've got the process down, just can't figure out if I'm missing something fundamental- or maybe I have a faulty pair of goggles. And I don't think the downgrade would correct anything. Thoughts? Thanks in advance for (hopefully) fielding my question. Take care.
thank you for all, what dji goggles work best for mavic pro platinum?
Thanks need all the help I can get.about to bind my v2 to a 553 bind and fly tiny trainer 3.tinch and 03 air unit
All these youtubers say "in the video description" and then its not there. However you are usually good about doing so. I just feel like every time that i actually go to some ones video description to find something....anyway, sorry just ranting, this is not directed at you Ian! 😁
Link was added but somehow it got lost. It’s there now.
Thank you so much for putting this instruction tutorial together. I was going to see about doing the root hack since I heard that it could be done on any FW, but I was not quite sure what to do. You just took care of me having to search around for what I needed. ❤
any reason to why the application won't start after connecting my goggles. My computer sees they are connected and DJI Assistant 2 also sees the goggles are connected, but the screen still says "Waiting for DJI Recovery device to enumerate.." and nothing is happening. My goggles are on 01.00.0607
why cant i see the link to the root hack etc in the description
?
@Ian, My V2 goggles have 1.00.0606 FW but when I tried to root my goggles it is asking me to Butter it first. Why is that?
hi,
I did everything you explain in the video and it worked perfectly, I have a dji O3 and Dji air unit, so at the end of the whole process as you suggested, I went back to the latest firmware version in the goggles, but everything i had done was erased, any help !!!
I have v.1.07 on goggles v2 and 1.04 on FPV, any ideas how to proceed the FCC?
Can you show a video displaying the osd in Betaflight and in the goggles , I am confused If i move an object in the betaflight window, eg GPS top right corner, It puts that icon bottom left in my dji goggles. And yes its selected HD and my goggles are set to 16.9. Just nice to see your not having the same issues.
Thanks Ian for this video, quick question, is there anyway to get rid of the DJI OSD?? I know you said to turn off custom OSD in the goggle menu, which I did, but the goggle and air unit symbol are still there as is a couple other elements, as they stayed on your screen as well, in your original WTFOS OSD video, after you turned custom OSD off. I take it we're stuck with those few small icons, and just have to adjust the Betaflight OSD around them?
I just posted but doesn't look like he replies to anyone
Do you ever find when you power on your quad sometimes the DJI FPV goggles V2 will stay stuck in low power mode, then you have to replug the quad in to get it working?
there is error
The system cannot find the path specified.
Failed with error #1.
help.....
Hello. After doing this process I cant get back the firmware version in the Dji assistant. Help
Yes.
so would you install the latest firmware after installing WTFOS then install the packs after the firmware is the most recent from DJI assistant?
I followed instructions got the osd displayed on beta flight but my dji transmitter stopped comecting treid everything ended up having to plug air unit into dji app and updating everything to get it working amyhelp
Do I need to delete the naco txtfile on my vista when installing the fcc hack package from the wtfos?
After downgrading the goggle v2.. and getting compatible to bind with each other... with the vista.. can I reinstall wtfos without any problems with capability with 03 and vista?? Cause right now I have no canvas mode on either vista or 03?
Hi, the
displayport_msp_serial CLI…command not working for me
do you have any idea why?
I ran butter after completing, I went on to WTFOS configurator.
Unknown device
Device connected - checking for ADB, this can take up to 30 seconds...
Failed detecting ADB, please (re-)root your device!
What do I do? I think Ive bricked my goggles
But the runcam wasp needs a higher Firmware than the 0606
I did something and got black screen. Was able to install .608 software, after this goggles' fan is working, but screen is black without backlight.
what a load of pavlova. Thanks for the info but that gives me a headache to do. Why do we have to do this?
im new to this and its over my head i just want to fly
isn't the msp osd already in the .607 update included?
This method have a problem, because when I did it. The buttons on menu the language not work.
Whether custom OSD are saved in DJI Goggles after this instalation?
Hello Sir! Short question: When this whole downgrade/root/WTFOS install & flash process is completed, can we still install newer firmware via DJI assistant 2 without loosing root/WTFOS, or would a firmware refresh via DJI reset all "hacks"? Thanks
Didn't you watch the whole video?
does it work on fpv googles version 3 as well?
This is awesome. Thanks to the WTFOS team!
So, at the risk of sounding greedy, O3 Air Unit support please?
Oops! NM. I figured out how to enable the OSD on the 03. Magic!
Thanks for all you do for the community Mads Tech!
What does this mean in English? ICAN run this, downgrade to a version that supports e.g Nolimitdronez and fly unrestricted?
I don’t see any links in the description?
I don't see the links in the description
Hello, I have goggles 2 and it cannot root. The options are for V2 and v2 goggles, I would like to know if it will be possible to root in the future or if this possibility already exists. I would like to install wtsf. many races
do you need to install these hacks to use the caddex vista system
I have 2 laptop in front of me windows 11 and 10 this does not work in noon of them :( It just stays stock just after I klick on one of the numbers :(
hi everyone. I followed all the process but I am stuck at "waiting for dji recovery device to enumerate " I just does not start
This is so awesome! Thank Ian and WTF.FPV Team!
I Have tried the software on two different computers both running 64 bit with no luck, I have also tried different data cables, I can not get the software past (Waiting for DJI Recovery device to enumerate) at this point I am willing to just but some goggles that are running the older software will this work on just swapping goggles? or will DJI force me to update? FPV running 01.03.00
When it says that, leave the goggles plugged in via USB and then disconnect the battery and then reconnect. It should start automatically.
Does butter work with the O3 Air Unit? It’s not working for me.
No there is no root for O3. Only AU and vista. There is no roots and hacks for O3 at all right now.
@@MadRC thank you. Do you know how I can at least get GPS info (home direction, distance, etc) appear in the Googles (V2)?
@@MadRC I think I figured out what is wrong. The GPS is no longer talking to the flight controller for some reason. I have to figure out why. This happened after I replaced the analog camera with the o3 air unit.
I have problem with google v2 can’t see osd make all process and nothing.
has the issues with FPV.WTF and using video out with Digiview been resolved?
Really good news, I just wish this was working on goggles 2 and o3.
I’m having issues with mine. It’s worked great to root and install WTFOS however…it’s missing the option to switch to DVI Avata. Connect to DJI assistant and it upgrades goggles. Then it appears but no WTFOS. Connect to FPV site and it says FIX. I do that and OSD back on but no option again to switch to Avata. Any ideas?
I did this a few days ago before this video and followed all the same steps. It’s strange as after the fix it just gives the option to switch to FPV mode only and not the 3 options. Then I get a mismatch on DJI Assistant so it updates firmware to latest which is fine. But same loop. No WTFOS until I fix etc…
What’s happening is both slots are not being updated. Post on the group and they will help you
@@MadRC Awesome thank you. I did just that and they sorted me out. Had to re-run butter, use some CLI commands to copy Slot 2 to Slot 1 and then given the option “Slot 1 is corrupt” and to fix that. That sorted everything. Reinstalled WTFOS and all running perfect. I should’ve just bought the Goggles 2 😂
How can you upgrade to the last firmware after routing the goggles? Using the dji assistant 2 is safe?
I have the MacOS Big Sur Version 11.7.7. soooooo,,, I'm out of luck,,right?
@Ian, do I need to butter/root Dji-Fpv-Drone?
my firmware stays same? but i rooted it already. missing something with "downgrade" ?
Any news of this root/software coming to the goggles 2? Would be nice if the new goggles could work with both air unit/vista and the o3 like the v2 can.
the g2 works with vista and airunit but only with them anymore, but at least you will have msp osd and you can use the controller 2
@@shambler01 oh that's right. But once you update the vista/air unit so that they can work with the g2, they no longer work with the v2 goggles 😭. Can't help but feel like DJI is doing this maliciously for people who need to use audience mode
Will this still work, for firmware v1.07 😬
I knew there was nothing to be worried about, eventually someone will figure it out. Thank you. #FPV
If I want to install WTFOS DJI GOGGGLES V2 writes:
"WTFOS is in BETA state!
Things might not work as expected at your own risk."
Is there a problem?
No it’s just community driven software that will never be anything but Beta as it’s not made by DJI.
Awesome Bro...can we downgrade after we upgrade firmware to use goggles 2? If yes, after downgrade, can we bind air unit to DJI goggle V2?
please advice..
Does butter also work on Mac for the downgrade?
Best news I've had all day
wow great news, will test it tmr morning
If you root the 03 air unit is the OSD able to show up in Goggles 2?
O3 has canvas mode already. There is no root for O3.
@@MadRC do you have a video of how to run canvas mode?
I’m in INAV I might add.
I have the v1 with 606 and already with WTF installed and working, now I can update the the DJI firm and will not loose all I’ve done?
u where always able to do that, but its nice to now have like a last resort now, where if anything goes wrong, brick or loss of root, some funny business,
you can always use this downgrade tool to sorta "reset to factory settings", then try again with root and upgrade stuff
I’m rocking wtfos on my v1’s w/ .0608 👍 you’re good
will it also work on DJI FPV the canvas mode?
However after installing WTFOS root air units can not be updated to the latest (ie for goggles 2 update). Only way to update is to uninstall WTFSO root.
Yes but it stays in the background.
Will this still work with fpv goggles v2 on latest firmware v01.06.0000
Great video as always Sir. But I have a question. Can I update my V2 goggles to latest FW (bc when I'm using them with de DJI drone, there's a sign that says that they're not in latest FW and that is annoying) I already did the root a few months ago and it's working very well. Hope you can help me. Cheers
Did you updated to latest firmware? I have the same firmware mismatch issue when using the drone
Hi Ian, perfect video. It answered all my question. Thank you and keep it up
This is great news. I have a question about this rollBack of the firmware. Does it also rollBack the droneMode firmware in the goggles, or just the airunitMode firmware?
I believe this is only useful for goggles firmware, not drone.
Whatever you connect, but not the drone 😁
@@QuadyMcQuadFace Yes sorry, i wrote my question a bit weird. I meant the goggles have a fpvDrone function and an airUnit function. My goggles are in fpvDroneMode on v01.03.0000. Does Butter RollBack this firmware or only the v01.00.0606? I dont fly airUnit, just the FpvDrone from DJI. I just want to do the fccHack on it.
@@TheCatFather01 Yes sorry, i wrote my question a bit weird. I meant the goggles have a fpvDrone function and an airUnit function. My goggles are in fpvDroneMode on v01.03.0000. Does Butter RollBack this firmware or only the v01.00.0606? I dont fly airUnit, just the FpvDrone from DJI. I just want to do the fccHack on it.
I'm pretty sure rollback will work with any version. If not get latest and greatest firmware for goggles and that should be able for firmware rollback.
Can I use this hack and upgrade to the version that supports the DJI O3 Air Unit?
There is no hack for O3 at this time.
Merci de France 🇨🇵 pour ce tutoriel.
Great instructional video Super Dooper!😊
Is this still currently working?
Where's the link 🤔
uhm, i just tried to root, it said my device might not be compatible, so i did the butter thing then tried again and its still saying step 3 instead of step 4 failed this time? anybody?
problem solved, needed sd card installed for this step.
Anyone knows if this still works?
bro, can anyone help "country code not update" FM update V2.1.15 I'm having this problem on air unit 03 to goggles g2, it's been refreshed & re-installed at the same time on the newest DJI Assist 2 it still doesn't go away and I've followed the suggestions from DJI Status G2 to connect the DJIFLY apk with GPS above 12 but still no response and firmware update from DJI FLY and the message doesn't disappear.. is there a solution? I've been repeating the method above for days but I can't... it's really sad...
This error is hitting a few people. Right what I have seen to resolve it is perform a full system reset with everything on. Then go outside and connect the fly app to your goggles and ensure it all connects had your gps location. You also need to be logged in on the fly app and allowing location data.
@@MadRC Thank you sir... I really understand this problem because you have given a good explanation.. finally I am confident again to do it step by step and repeat it again..
now this problem has been resolved 🥰🥰 even though it failed several times because the unit was hot..
WTF are the heroes we need right now
Please Guys does this still works....? thak you
Muchas gracias valedor, te rifaste con este video tutorial, eres un chingon!!! ( mis gafas v2 estaban en la version .607)
Hola! en que version dejaste tus gafas?
are you saying that this way you managed to upgrade from version .607 to version .608 ?
This is fucking great super uber news man!!!! Today I am so happy
I used to always open discord and search for "0015" to see if there is any movement, i was like 1 day late, when i saw it, didnt go to bed, ran the exe without hesitation 😂,
they deserve a nice donation from everyone
It simply does NOT work :(( No matter which USB-C cable I use, or which port... it doesn't find my goggles (DJI V2). I did all as you sad, but without recognition, it does nothing :(((
Make sure the DJI assistance is not running
@@cafub2650 I was finally eable to flash the firmeware of the goggle, but now, I have a new problem. When I start the goggles, I just see the language stettings and.. NOTHING reactes! No matter which button i press, I hear a beap but nothing changes or reactes?! :((
If i wont dlite ????
The 0606 . No work me and i dont can do updat in. Dji asisstent 2 . To 0606