Thanks brother! that´s fixed my dualsense drift. I thought it was hardware issue, open the controller and cleaned the ring sensor but no success, thanks to this app I can fixed that shit!!!!
The online software to recalibrate the sticks does work. There’s a newer version of the yellow cap Ginfull Hall effect sticks that are half round magnets with a red pcb. You DO NOT manually calibrate these ones after install you use the website and recalibrate center it will be perfect. I bought 4 pairs for $4 each. Replaced sticks on a used black bdm-030 controller as they had drift really bad and it works flawlessly. The circularity error at the corners will never be perfect that’s just how joy sticks work EVEN with high quality Hall effect controllers there will still be like a 10% error if you try to get it to be perfectly circular 0% error you will run into issues. Reset controller, recalibrate stick center and last resort calibrate circularity if not you’re looking at a faulty joystick.
I just reviewed this controller with hall effect - and it came with 0 average error which i never seen before: ua-cam.com/video/SsbPooKvYdk/v-deo.html&lc=UgzxIBe7z3cYxe3ZIk54AaABAg
@@TheGamer2Know Definitely a unicorn! impressive that they went through he effort to make the circularity perfect. However between the censors intersecting the error will always be there because the case design and how the censors work, it’s empty space. That’s why controllers have a circular ring around the sticks. The circularity test is actually intended to test stick center, so there’s always a margin of error. Meaning the left stick you manually adjusted then recalibrated in your video you may have actually took way off center or perhaps it’s faulty.
@TheGamer2Know But what happened if you messed up...tried to fix my controller and when testing to see if the drift is gone... idk what happen but not it won't center itself and I tired resetting it but it won't work.... am I screwed?
Is the hall effect calibration, that you have done physically, done by clicking a button through the small holes or are you moving the anchor inside? I have the same issue but my zero point is very very far to the side
@@Cursirr i updated the controller a couple days b4 i did the sticks. ive done 2 other controlers with success. maby i need to restart my pc or try a different browser idk. i hope i didnt mess up the board but anything is possible
i think you did not succesfully did the range calibration, when you do the range calibration without rotating the sticks will jump in every direction and dont forget to save the calibration
Even with hall sticks you will need a bit of calibration no matter what they say. Yes you can drop those in and almost get it right so that you wont notice while gaming, but you still need calibration for best performance.
@ClosestNearUtopia I highly doubt you fully understand what you're talking about. I have been using the Kaleid Flux since August and have calibrated it only once. The calibration process is so straightforward and user-friendly that it merely involves pressing a button combination and then rotating the joysticks to their maximum extent. Does that sound overly complicated to you? 🤔 In Fortnite, I have the dead zone of the left stick set to 7% and the right stick to 5%, and I have not experienced drifting a single time. 🌟 Personally, I would much rather calibrate my controller just once than be forced to repair or replace it every few months due to drifting issues. 🎮
brother I LOVE YOU thank you so much man, greetings from brazil, you deserve everything that is good in life
Thanks brother! that´s fixed my dualsense drift. I thought it was hardware issue, open the controller and cleaned the ring sensor but no success, thanks to this app I can fixed that shit!!!!
This worked for me today on my Dualsense Ps5 controller! Had a slight drift on a right stick about 0.05 ! All centered now on 0
The online software to recalibrate the sticks does work. There’s a newer version of the yellow cap Ginfull Hall effect sticks that are half round magnets with a red pcb. You DO NOT manually calibrate these ones after install you use the website and recalibrate center it will be perfect. I bought 4 pairs for $4 each. Replaced sticks on a used black bdm-030 controller as they had drift really bad and it works flawlessly. The circularity error at the corners will never be perfect that’s just how joy sticks work EVEN with high quality Hall effect controllers there will still be like a 10% error if you try to get it to be perfectly circular 0% error you will run into issues. Reset controller, recalibrate stick center and last resort calibrate circularity if not you’re looking at a faulty joystick.
I just reviewed this controller with hall effect - and it came with 0 average error which i never seen before: ua-cam.com/video/SsbPooKvYdk/v-deo.html&lc=UgzxIBe7z3cYxe3ZIk54AaABAg
@@TheGamer2Know Definitely a unicorn! impressive that they went through he effort to make the circularity perfect. However between the censors intersecting the error will always be there because the case design and how the censors work, it’s empty space. That’s why controllers have a circular ring around the sticks. The circularity test is actually intended to test stick center, so there’s always a margin of error. Meaning the left stick you manually adjusted then recalibrated in your video you may have actually took way off center or perhaps it’s faulty.
With manually, this guys means mechanically adjusting for calibrated center-point. Thanks, broke my brain over this story here.
@TheGamer2Know But what happened if you messed up...tried to fix my controller and when testing to see if the drift is gone... idk what happen but not it won't center itself and I tired resetting it but it won't work.... am I screwed?
Never mind I figured it out like either that day or the next just recalibrate the center and when doing sooo try moving analogs around.
@@Knightfall02 thx
You are the best maaan❤❤❤
Are the joysticks supposed to be pulled after L3 and R3 press?
I found that very peculiar.
Youre not supposed to press them, just pull them.
Is the hall effect calibration, that you have done physically, done by clicking a button through the small holes or are you moving the anchor inside? I have the same issue but my zero point is very very far to the side
Twisting it inside
@@TheGamer2Know Got it, Thank you so much!
It's working Thanks
i tried it with the edge controller and it doesnt even read it i guess it only works for the standed ps5 controller .
Yea I think it’s only for the dualsense
Does anyone know if you can use this on an android tablet?
Anything for Xbox series 2 or dual sense edge controllers
Hello the middle rectangular shape part came while fixing my controller is way to fix and how
do you have an alternative to the xbox accessories online? since i use the LTSB
I wanna know too
Me too
tryed 2 hall effect on left stick wont work on bdm 30. the right stick worked but left did not
I just did bdm 030 black controller replaced both sticks with just a board and battery plugged it in and reset center. It does work.
@@Cursirr i updated the controller a couple days b4 i did the sticks. ive done 2 other controlers with success. maby i need to restart my pc or try a different browser idk. i hope i didnt mess up the board but anything is possible
@@codybeers1562 I used chrome however I did do this before the newest controller update just a couple days ago.
did this to my ps5 controller and now is going crazy all over the place lol. any fix for this issue?
i think you did not succesfully did the range calibration, when you do the range calibration without rotating the sticks will jump in every direction and dont forget to save the calibration
read the other comments here?
I don’t think this program will work with Xbox one controllers can you think of a way to get it to work
it worked for me you are the best
This page can confirm if my control is a clone and if so, it will notify me with some text or it will not connect.
it worked with me i just had a liitle bite of stick drift
Everything on my controller works fine but I believe the software messed with my dpad my down and left won’t work
Does this only work PS5
Bro, just start using hall effect controllers, there are hall effect controllers for PS5, i use GameSir Kaleid Flux for Xbox.
Ima look these up. How’s your experience with them?
Pretty good so far. No drift, and the precision is solid. Definitely worth a try.
@@ThatsJust_Ty yo bro i need some too u got any spare change lmao
Even with hall sticks you will need a bit of calibration no matter what they say. Yes you can drop those in and almost get it right so that you wont notice while gaming, but you still need calibration for best performance.
@ClosestNearUtopia I highly doubt you fully understand what you're talking about. I have been using the Kaleid Flux since August and have calibrated it only once. The calibration process is so straightforward and user-friendly that it merely involves pressing a button combination and then rotating the joysticks to their maximum extent. Does that sound overly complicated to you? 🤔
In Fortnite, I have the dead zone of the left stick set to 7% and the right stick to 5%, and I have not experienced drifting a single time. 🌟 Personally, I would much rather calibrate my controller just once than be forced to repair or replace it every few months due to drifting issues. 🎮
I BROKE SOFTWARE AND MY CONTROLLER HAS SUPER DRIFT