Factory 47 2015-2020 Road Glide 14" Handle Bar Install using STOCK CABLES AND WIRES
Вставка
- Опубліковано 8 вер 2015
- factory47.com/shop-by-part/ha...
This works with any of our Road Glide handlebars. We have an updated video for 2021-23 models here: • How to use stock cable... - Авто та транспорт
First off, I want to say thank you to Factory 47. Your shop in Whittier is amazing!! Second, Your customer service is of the utmost excellence! Third my bars are great!!! This install video help me in doing my STR Miter Bars 14'' on a 2022 Road Glide FLTRX. Super easy process that took me only an hour to achieve!! Thank you Factory 47!!
Really makes my bike look awesome. 14" bars were perfect size !!! So glad I went with Factory 47. Flawless fit and finish. I would highly recommend
how tall are you???
I'm 5'10 and I went with 14s
I got the 12inch followed the video for install on my 2016 road glide, simple process, with a 6 pack of cold ones.... hands use to go numb when I ride, now I'm flying in the wind....1 Luv for factoy47....
Installation went well. There were some changes between the 2015 and 2016 Road Glide. It's a positive change. The big plug that had to be removed is smaller and does not have to be remove to pull the wires through the bars. I am glad I bought the bars.
+HDRomine Thank you
HDRomine how easy was running wires through with connectors on? Didn't give you any problems?
Thanks for the heads up, just took apart my 16’ road glide to install these bars, I’m like where’s the big plug???
First off, Thanks for making this video! Second pictures DO NOT do these bars justice!! "WOW"...I received my bars yesterday and after unpacking them from a very large high grade box I am blown away by the quality of these bars!!! Factory 47 ... WELL DONE!!! Fit , Finish-and overall quality is beyond my expectations. The chrome finish is true SHOW QUALITY!! Are they expensive?? Yes! But you really get what you pay for!! Thank You Factory 47, you are at the top of your game!! True Made in USA Quality. And to all the do it yourselfers, Watch the video.......its as easy as they show to install on the rushmore R/G's. No cable extensions, no brake or clutch lines replaced, unless you go over the 14 inch bars. Or pay some one $350-450. To install. I checked on 2 different shops and 3-4 hours is what they quote at $90 per hr.
Thank you for the review and we are glad you enjoy the bar. We take a lot of pride in making each bar.
That's doable, someone just quoted me $$1800... he said it's a minimum 7 to 8 hour job!
Manuel Mares my dealership quoted it at 4hrs. Either way, it’s a rip off having them do it.
My bars came in today! I have to say they look absolutely great. I will let everyone know how the installation goes!
5 years is a long time to be still installing....
Now there are 7...😅😂
Needle nose pliers for cluster screws you are the man. What a pain in the ass those screws are. Thank you for the tip
Thank you, this is the video I could find for lacing wires through my style apes. Great video.
Excellent video @Factory 47 Cycles I recently installed my signature series bars on my 2017 RG standard and this video is 100% accurate as of how to install these bars took me maybe 1 1/2 hours with no help using all components in this video and I installed a set of Avon air cushion grips it is a very nice upgrade to the scoot and makes it very becoming and comfortable for the highway thanks for creating such a great product I saved $1000 bucks for investing in these ape hangers instead of having harley do a set of bars for me( $1500 bucks) thanks again!
Javon Charles did you have to extend the wires and cables and do you have a version with abs lines if you did have to change your brake lines?
ALJamaine Smith no I have the standard and no I didn’t have to extend the wires at all nor the brake lines everything was kept stock for the 14” ape hangers best product and bang for the buck if you ask me harley charges around 12-1500 bucks for an ape hanger install so with a lil time and patients u can install these in an hour or two tops and ride out in style
Did you relocate and wire or lines to make them longer? And does it make brake and clutch lines tight when you turn left and right?
H-D just quoted me $1400-1500 trying to tell me I need the cables and that it would take 8 hours. Thanks to this video I will not be going that route. Also got signature 14”.
I just did my bars . First I use cable lube, I did two cables at the same time alternating as I push & pull each one..I also installed kahuna heating grips which made the left side a pain .
I got a 12” F47 bars for my 2019 Road Glide Special and its a pain in the ass to install all these cables.
Nice job brother…time and patience!
I love my 18"flat black factory 47 bar on my 2015 road glide special:)
hows that ride.... im 6'3" try to choose a nice size
Installing 12's on my '08 Road Glide this weekend 🤘
Any updated pictures? I have the same year bike and am thinking about 12s.
mine on order ..can't wait
Just ordered a set for my 17 RGS! First mod stock bars bother my elbows!!!
@Gregory Johnson No you can use all Factory lines
awesome video saved me hundreds of dollars. no need to take plug loose on 2016
Glad to hear.
Which plug? At what point in video?
Fantastic!! Can’t wait to get some.
Hi, this video is awesome. A little over 3 years old. I have a 2017 Road Glide and at some point I will be swapping out the bars for a set chiseled. I'm wondering about the pin. Is it necessary to have it installed. I'm sort of short and wanted to pull them in an inch or so.
amazing work brotha!
2016 road glide install. can I add heat demons and also run the wires inside the bar? any special instuctions?
I ordered a set 14" on 10-16-2015. I will let everyone know how it goes. I am installing them myself on a 2016 Road Glide Special. I will be going step by step using the video.
I have a 2016 will this bars fit the same way???
Yes. I put them on my 2016 Harley Davidson Road Glide Special. They are awesome!
+Rick Romero Yes they will
+Customer Service thanks brother for the info
+HDRomine How long was the install.
Did you install new poly riser bushings for these bars?
thanks will be installing my 14" Rivera's soon. What was the glue used for?
These work with adding heated grips also
for the 14 pouces , without changing the clutch wire and brake wire for road glide 2015 ? Must it change the electric cables ?
I just brought a 2018 road glide and I want your bars!! I need to change the clutch cables and brakes cables?
At exactly 14:06 you are putting the wires back into the small plug but you never show how to take those wires out ... did I miss it or you skipped it .. I can’t get that plug to pass threw the bars , so it has to come off .. how do you do it ..? Thanks
Will these fit on a 2018 road glide special without any extensions
Where you able to install those 14 in with using your factory cables and wiring
Just purchased a 2021 rouadglide, I know its now a cable instead of Hydraulic, will these work without having to change out clutch cable?
what tool was used to undo the wires from the harness?
Do you have to shim the front brake lever? To not break the switch on the 15+ bikes
will this work on 15 FLTRXS with stock cables and lines? HD says stock 6" will not stretch past 2", they lying. video looks convincing but just wanna make sure is all .
Does the big plug have a diagram where the wires go back?
Step @ 3:42 do I have to do that or can I just feed the cable through the bars with that connector?-Thanks
I have a 2018 road glide will I have to extend the cables?
hey guys quick Question im taking of my stock handle bars off my 2015 road glide special and putting on 14 inch factory 47 assault bars do i need to get extenions cables
will these work on a 2005 Road King without having to extend cables or wires?
IT Looks like the STR Miter bars have the factory pin notch at the bottom of the bars so you don’t have to pull the factory pin in the riser. The picture on the webpage shows the clearance notch as well. Is that correct? I believe it also states that in the video to leave the pin. The bars are made to accommodate. Correct?
For a 2015 ultra limited do you need to change cables for 14inch?
I have a 2024 and I cannot get enough play out of the clutch cable. Do you have any suggestions or am I missing something? Other than that it went fine.
Yes it is JonBlackboy but only for 2015 Road Glides
Hey Factory 47, why does Harley tell you that you need me wires and cables for 14in bars. I know to make $ right?
Do I need cable extension for Road Glide CVO 2018? Same bars Factory 47 Handlebar Chrome Signature 14?
I change my handle bar from the stock to 18"
Anyone have problems with clutch feel after install. Almost like air got in the system.
great video
What’s the name of the song that starts out the video?
@Jesse Glatz You do not need that panel.
How tall are you? I’m 6’3” waiting to know if 14” is tall enough or would you recommend 16”?
Does this work for the 14" Legacy bars?
I want to do this on a 2019 roadglide special. Will ALL cables and wires reach? Also does abs make a difference.
So I went forward with the install and all cables/wires did reach. ABS did not make a difference. Great bars easy install!
Nice work Factory 47
How long did the installation take?
@Customer Service WIll the installation procedure for 2015 CVO roadglide will also be the same? as we have heated grips.
Its a little different due to the other side has the internal part for the grip and a few more wires. But its super easy.
How long should this installation take?
Honestly how long to change out those bars
Nice soundtrack
Can anyone confirm if this method did work for 2018? Did the check engine light stay on for everyone in 2018. Wanting to try this on a 2019
Look Awesome feel perfect
Stock lines will NOT work with 14 inch bars, on 2018 Road Glide Special. I found this out the hard way. $300 for new lines.
You are so right they don't talk about the hydraulic clutch and the brake lines only thing fits is that middle extension piece that's about thirty or forty dollars 👍, I have mine I love them though just pay the money get them done right.
i have 12.5 tallboys on my 2015 road glide special that were installed with all factory wires and cables. i want to change to the 14" chiseled bars by harley, will these be capable of being installed with all factory cable and wires as shown?
I would think so with 14"
whats the music too?
I have a dumb question ? On a 2016 R G ultra can I roll the handle bars forward for comfort the pullback mode sucks and it's 2,000 g's to replace with apes the stock bars in the right position has to b cheaper, please give in put
You can, just pull the pin out. It pulls straight back.
I've watched a few of these videos. Why doesn't anyone ever pull two pull strings in the throttle side then pull one of them out of the control location so they can pull all of the wires at the same time? I'm an electrician and it can be a pain pulling wires into a conduit that's already pulled. This is how I would do it it would avoid having wires twist around those already installed.
Just got my 14". Not sure if they're gonna fit with the new clutch cable on the 2021's sucks cause the aftermarket is available yet.
I got 14” for my 2021. Today. How the install go.? Was New clutch cable needed?
Nice beats.
I'm kinda hoping my bars come with a mix tape!
Could I do 12" hangers on a 08 road glide without changing the clutch wire and brake wire. Or could I go as tall as 14" ?
No only 10"
I’m about to order my bars and I’m going to do a UA-cam video for my the people who keep telling me I need new cables for 14” bars.
CloverKing Production did you need new cables?
@David Esparza Yes you would
From what I can tell there were no modifications to the brake lines and clutch cable. Is this correct? Would you say that anything above 14 inch rise would need all new cables and electrical extensions? Thanks.
Yes anything above 14". But only for 2015-17 Road Glides
Customer Service actually Factory 47 figured out a way to do up to 16 in with repositioning stock cables
IT DOESNT STRETCH THE BRAKE LINES? I WAS GOONA BUY THE 14" YAFFE BARS BUT THEY SAID I WOULD HAVE TO BUY NEW LINES AND WIRES FOR MY 2015 ROAD GLLIDE
+Gregory Johnson We have sold over 500 and personally did 20 of them.
Well I just did 14 inch on my 2017 Road Glide although the wires were long enough the clutch cables not too bad but the brake line although it's up there is very tight
Is it the same for a 2017 street glide special? and if not what is different
No this is different. For the street glide you need to take apart the whole fairing and extend your cables and wires.
Would be the same for 15 ultra cvo
I called local HD shop to inquire if I needed new lines and they told me all new lines and a twist grip sensor if i installed their 14" road glide handlebars (part #55800440). Any ideas, other than getting taken to the cleaners! I just saw video and I want your bars!
As long as it is a Road Glide 2015-17 it will work. Show them this video.
what about a 13 roadglide
Is that the stock clamp?
Wonder if it fits stock wires and cables on a 2017 roadking anyone knows?
Not if you want them to look original
Will these fit on a 2018 Road Glide Special? I'm thinking so....but would like to be sure. Thanks in advance.
I just did install on my 2018 RGS w these 14” and the wiring just comes out from the bottom hole making things tight but works. Everything works but my engine light stays on. I loosen the controls one at a time to see if it was a pinch wire and no luck. Going to check code and see if I can clear it...Anything else I should check?
Buszzbait69 did you ever get the issue resolved?
would I need to buy a wire kit and new brake and clutch cables to install on a 2013 road glide ?
+David Esparza Yes you need to buy new cables and wires for 2013
+Customer Service Yes you do
Right around 18:40 you disconnect the plugs from what looks to be a plastic mounting piece and then don't reinstall it, why is that part no longer needed? Docents it keep the wires neat and keep them from moving around and such?
+Jesse Glatz You don't need it and it gives the wires extra room
I removed my plugs from that plastic piece and you definitely need to to fit the wires back together but I left the plastic piece in there was no need to take it out wasn't in the way
how much different would install on a '13 RG be?
Its a lot different. Plus you can only go up to about 10" with stock cables and wires.
I never saw a reply from customer service on weather you need to extend the stock cable and wires for 14" bars on 2018 Road Glide special.
Hi Dylan, I installed with some HD extension wires merely because I didn't want to pry away the connection behind the instrumentation. To me it made it easier and kept it original.
@@Elwinator3 Thanks Alvin.
Alvin Gallegos Thanks for your comment. Any issues with your stock clutch and brake lines being long enough?
@@PezRacer no problems at all.
now is this the same process of an 06 road glide
+Benihana Larry No sorry
Hey guys I was just wondering some people have told me that I can use the factory cables just extend the wires for a set of 16s on my 19rgs I was just wondering if you guys knew
Brad Arnold for 16s you will to change cables.14s is the max
You can use 16 in bars and use your factory cables you just have to cut the tie and the plastic piece underneath and reroute
Of course... it always looks easier on UA-cam.
hey I have the same bike how much will u do my for$$$ the same bar
+big b big b The bar is $450
where are you guys at i need my bars done 07 ultra classic
+ronald l smith Pico Rivera CA
Cool see you all in june I'm riding down from Chicago
I need them in black , how do I other them ??
Call and talk to them. They are very helpful. Andrew is the person I spoke with the most.
U been a great help brother , u have a number for them ? I been looking and I don't see to find a contact ..
562-692-5227
+Rick Romero don't bad customer service incorrect wait time.
Rick Romero 0l
Thank you,I was quoted $400.00
Should I presume this is the same for the '15 Road Glide Special as well? Are the Malo's usable for the '15 special?
Yes.
Omg the dealer said 20 ft lbs I made it 20 will I be ok
That is fine. The tighter the better as long as it never broke.
I take it this will work for the 18 RGS too?
Yes it will I ended up buying HD wire extensions and installing heated grips. I used extended wires so I didn't alter the original wire placement. Where you see him using a needle nose pliers wasn't needed I had easy access to the screw heads with a screwdriver.
Thanks I didn't have the patience so I just went and bought them. I did have to get the wire extensions from the website, but after I put those on these bars were a breeze to install. All in all probably 4 hours from start to finish.
Alvin Gallegos that part threw me off. Is it because the original wires aren’t long enough to bend the bars giving access to the screw with a driver?
Y’all ever hear of a battery operated drill to make things a little quicker
How
So you are telling me I can use factory lines on a 17 road glide if I only go up to 14 inches?
If you do it's going to be real close to tight. unless you don't care how your wires stick out got mines done two years ago I tried it didn't work at the dealership install them in. 216
This procedure would be the same for a 2017 road king using 14 " Malo bars
No, it is different. Unless it is a special model you would need cables.
@@Factory47cycles you can do it with a road king special. But not 2017 standard road king correct. Will need clutch & break cable's.
Is this for real? If so I will order these bars ASAP
+Jonblackboy Yes but only for 2015 16 Road GLides
Jonblackboy and 17?
I picked up a 2018 can I do 14" bars without cable extensions and lines
Yes but if you want to avoid altering the stock appearance you can get HD extensions. I bought HD extensions for less.
what is the liquid in the bottle?
Super glue. We used it to re glue the stock grip.
is that a necessary step?
jahmakecan yes
Talking instead of music would have been better. Looks like he slammed his right 4th finger pretty good on a prior install.
Just kidding great video
a narration of what the tech is doing would be a lot better than the music