All I needed was how to reset the time. Daylight savings. I'm over half way through and not yet a word about the clock. Lots of mistakes to confuse the audience. I will download the manual. Thanks.
How do I change the wind to current rather than average? Also my rain does not register. I did what it said and used my finger to similate it filling with water and tipping. Tnx
I couldn't see what Barometer setting you chose on the display?😕 Also, my unit keeps displaying the year at top left by default. You didn't go over how to change that so it shows the Date? I tried buttons to no avail.
Hi. I’m in Cairns QLD Australia. I have a ft-0835 which is the same as as-0835 I think. It has wifi but the rainfall and wind speed/ direction will not display on screen. Any ideas ?
Hello, thanks for your video, how to use calibration mode? It’a named on the instructions but no way to understand how enter the mode. Both my temperature are 2 degrees offset..
I just set up two of these units. I had some difficulty setting up the second unit on wifi using the Sainlogic App. It just would not log into the wifi at that location. Eventually I decided to try using the alternative method of using a browser as mentioned in the included instructions….success!
The WS-0835 DOES connect to wifi, and supposedly will share data with Wunderground and Weather Cloud, if you can work enough magic to navigate their clunky connection and interface instructions and procedures. Mine is probably going to be returned because it'll connect to Wunderground, but only updated every hour before falling offline completely. Connectivity between the sensor and the display console is better than I'd hoped for, with a full-strength signal through a wall and 150' of separation between them, and navigating through setting up the display was straightforward and easy, as you demonstrated in this video...I just wish setting up the wifi had been as simple.
I have this same issue with my Sainlogic WS-0310. It appears to be an issue on the Weather Underground end. If you look at the upload data you will probably find the last four hours are in hour increments, but beyond that updates are every 5 minutes. Updates to Weathercloud seem to work correctly for me as Weathercloud shows it updating every 5 minutes.
Your video was very helpful. Helped me set up the display for the first time. Much better than the instructions in the User Manual. Thanks.
All I needed was how to reset the time. Daylight savings. I'm over half way through and not yet a word about the clock. Lots of mistakes to confuse the audience. I will download the manual. Thanks.
You didn’t mention the year date and time settings. Other than that, a well done video.
Thanks! I could not figure out from the manual how to reset the rainfall duration; you made it easy.
My problem with this video was more about changing setting once you have it set up. I wanted to learn how to set it up initially.
I've referred back to this video about 30x. Thank you
Why would my outdoor temperature read LO? Batteries have been changed and I even pressed the reset button after that didn't work.
How do I change the wind to current rather than average? Also my rain does not register. I did what it said and used my finger to similate it filling with water and tipping. Tnx
How do you set backlight to stay on - it keeps turning off -thanks
What causes the outside temperature not to work, but everything else works fine?
You may have a dead sensor contact the company
Thank you for the clear instructions. My only comment is I wish your video was a bit more brighter.
In the rain guage portion, what is that flashing above the word inch?
I couldn't see what Barometer setting you chose on the display?😕 Also, my unit keeps displaying the year at top left by default. You didn't go over how to change that so it shows the Date? I tried buttons to no avail.
Hi. I’m in Cairns QLD Australia. I have a ft-0835 which is the same as as-0835 I think. It has wifi but the rainfall and wind speed/ direction will not display on screen. Any ideas ?
How do you do this as I’m trying to match the inside temp. Use the calibration feature to match the indoor
Hello, thanks for your video, how to use calibration mode? It’a named on the instructions but no way to understand how enter the mode. Both my temperature are 2 degrees offset..
Good question. Help
I just set up two of these units. I had some difficulty setting up the second unit on wifi using the Sainlogic App. It just would not log into the wifi at that location. Eventually I decided to try using the alternative method of using a browser as mentioned in the included instructions….success!
so... the BL button doesn't keep it on all the time. Keeps it on for 14 seconds. w/o pressing and holding the button it stays on for 6 seconds.
Does system allow to view rainfall history?
Only totals for day, month or year
how do you calibrate the humidity
Great video thanks. Pls explain weather tendency and which option to use. I'm on default and it never changes
Thanks
Any idea how to see constant wind speed vs gusts and average?
Hit the min/max button to see your peak wind speed. Not sure if there is an average function.
@@MulkeyFilms thanks but I'm looking for current wind speed not min max or average
The WS-0835 DOES connect to wifi, and supposedly will share data with Wunderground and Weather Cloud, if you can work enough magic to navigate their clunky connection and interface instructions and procedures. Mine is probably going to be returned because it'll connect to Wunderground, but only updated every hour before falling offline completely. Connectivity between the sensor and the display console is better than I'd hoped for, with a full-strength signal through a wall and 150' of separation between them, and navigating through setting up the display was straightforward and easy, as you demonstrated in this video...I just wish setting up the wifi had been as simple.
I have this same issue with my Sainlogic WS-0310. It appears to be an issue on the Weather Underground end. If you look at the upload data you will probably find the last four hours are in hour increments, but beyond that updates are every 5 minutes. Updates to Weathercloud seem to work correctly for me as Weathercloud shows it updating every 5 minutes.
@@lanceberwald9217 No he podido conectarme al wifi.
No he podido conectarme conectarme al wifi
@@DeiviSaavedra Tampoco pude conectarlo, por eso lo devolví. Compre una estación meteorológica Ambient.
@@DEADorALIVEkayaking si, porque no me sale la red WiFi en el celular para poder configurar
Thank you for sharing.
how to clear the rainfall amount
Thank you!!
Having trouble setting time and date. 😅
Setting up time and date
I just want too change date and time..that's it
You skipped several key functions in this video and went on and on about others. I did not find it helpful.
Thank you. The directions were useless.