outinthewood Hi, unfortunately it looks like there is going to be the opposite. The first 572xp to central Europe will, according to Husqvarna, be shipped with H42. Early 2018 they will reach the market.
Ah well another disapointment...Myself and Husqvarna Ireland were looking forward to a 572 appearing a lot sooner ! I took great interest in the video you did of the launch so at least I know what to look forward to !
Your English is very good! What I saw was very typical for most brands. Neither chain had the depth gauges set anywhere near the specs from the factory. Worse yet, it usually isn't consistent from cutter to cutter or box to box. For that reason I've taken to checking cutter sharpness and consistency and setting the depth gauges to spec on all new chain before ever putting it on a saw. Otherwise you could buy 5 of the same chain from 5 different dealers and potentially get 5 different results.
I was late to the party, so not only did my 572xp come with an X-cut chain, but also twin dogs and 20% off with a free second chain. Lovely saw and chains.
Tried the X-Cut today on my Husqvarna 440 and WOW, I saw the difference and was very happy / impressed with it!!! I will buy again and even get one for my Echo 16in!!
Thank you for the video in english, much appreciated. Are these chains out of the box, or have they been touched up? I would also like to see a close up of the cutter configuration and angles. Heading to your website to join the forum. See ya there!
I use the chisel chain but I use the 7/32” file first in the tooth to give the curling chip more room to get out. Them I use the file guide with a 1/4” file on the very top edge of the tooth. Once I sharpen anyone’s chain they are a customer for life.
Just had a look over on the site and it's interesting to see that the X cut is like an "old " chain with no bumper links so should be great for boring and be fast when you found that "happy" spot on the rakers ! Thanks again.
Seemed about a second to a second and a half faster. What is,, the design difference, and does the chain stay sharp as long as the standard u used? Pretty quick long as u have the saw to power it. Thanks.
Thanks for the English version. Unfortunately, I haven't seen the 572XP or the Stihl 462 in the US yet. Hopefully they make it to our market eventually.
Your English is great. Better than some native English speakers:) Any idea when Husky and Stihl will release the 572 and 462 in US. Is the delayed release to the US due to modifications for US emissions or just simply not enough saws to release at once around the world? Great videos, very informative. Thank You!
Jag satte in iden att märka kedjan för underlättande av underhåll till Husqvarnas produktutvecklingsavdelning ett drygt halvt år före kedjan lanserades. Husqvarna hade troligtvis samtidigt kommit själv på samma ide eftersom dom inte ens besvärat sig att tacka. Eller så var det nån på produktutvecklingsavdelning som presenterade iden som egen.
Det är väl en självklart idé eftersom man alltid när man slipar i maskinen tar en spritpenna och ritar på ena länken för att inte gå runt mer än ett varv. Du kan ju få en annan idé av mig som plåster på såren och det är att på de sågar som har en generator , dvs G-modellen, så designa en 3-d printbar ljusdiod som sitter på sågen. Varför? Ja det är mörkt halva året . Drar någon watt i effekt så märks inte men underlättar när det är skumt ute. sök mönsterskydd för detta och sälj sen in detta till husky eller sälj som privat tillbehör. Att sitta och gnälla hemma på att ngn snor ens ideer när man inte gör ett skit själv för att realisera dom är inte okey så nu har då fått en ide som är betydligt bättre än att sätta ett streck på länken.
your english is very good , ive seen a lot of your videos and get through it well even thought its swedish , but now you do it in English it will cover a lot more countries , so great job done there , keep them coming
So annoying! Not your video but I’ve just bought new H42 in 18” and 20” for my 555! Damn bad timing or what? Great information here, very clear, just as it’s “getting that time of year again” 👍👍 Thanks from everyone who appreciates Husqvarnas technology.
thumbs up for English! Thank you!
Thanks for doing it in English ! It looks like a very impressive chain and maybe it will be avalible a little sooner than the 572 !!
outinthewood Hi, unfortunately it looks like there is going to be the opposite. The first 572xp to central Europe will, according to Husqvarna, be shipped with H42. Early 2018 they will reach the market.
Ah well another disapointment...Myself and Husqvarna Ireland were looking forward to a 572 appearing a lot sooner ! I took great interest in the video you did of the launch so at least I know what to look forward to !
Your English is very good! What I saw was very typical for most brands. Neither chain had the depth gauges set anywhere near the specs from the factory. Worse yet, it usually isn't consistent from cutter to cutter or box to box. For that reason I've taken to checking cutter sharpness and consistency and setting the depth gauges to spec on all new chain before ever putting it on a saw. Otherwise you could buy 5 of the same chain from 5 different dealers and potentially get 5 different results.
Thanks for the English.
I was late to the party, so not only did my 572xp come with an X-cut chain, but also twin dogs and 20% off with a free second chain. Lovely saw and chains.
You speak very good English. That c85 chain looks sweet.
NOTHING CAN BEAT THE X-CUT!! 🤣
Tried the X-Cut today on my Husqvarna 440 and WOW, I saw the difference and was very happy / impressed with it!!! I will buy again and even get one for my Echo 16in!!
Thank you for the video in english, much appreciated. Are these chains out of the box, or have they been touched up? I would also like to see a close up of the cutter configuration and angles. Heading to your website to join the forum. See ya there!
XP Slinger Hi, yes, they are both straight out of the box.
Thanks. Looking forward to the new chain hitting the US market.
I use the chisel chain but I use the 7/32” file first in the tooth to give the curling chip more room to get out. Them I use the file guide with a 1/4” file on the very top edge of the tooth. Once I sharpen anyone’s chain they are a customer for life.
Thank you. Excellent video and useful comparison.
Nice test is is faster than square ground chain?🤘
Hi bro
Does the husqvarna c85 x cut engine chain use a round file or a hexagonal file?
What's the difference in chain cutter configurations? I would like to see a closeup of both.
mcunard31 Hi, I will try to upload close ups on Forestry.com
Ok, here is some close ups on the chain side by side with H42 and SP33G. www.forestry.com/topic/close-up-images-of-x-cut-c85-side-by-side-with-h42/
Just had a look over on the site and it's interesting to see that the X cut is like an "old " chain with no bumper links so should be great for boring and be fast when you found that "happy" spot on the rakers ! Thanks again.
Skogsforum.se on UA-cam; I can't see the pictures, create an account or login on my device.
Those times would have been even better if the chain was full throttle before bitting the wood.
Seemed about a second to a second and a half faster. What is,, the design difference, and does the chain stay sharp as long as the standard u used? Pretty quick long as u have the saw to power it. Thanks.
I like your Swedish sense of humor and all in ENGLISH haha :).... great demo on how to cut down a tree in ten seconds, good chain comparisons!!!
Thanks for the English version. Unfortunately, I haven't seen the 572XP or the Stihl 462 in the US yet. Hopefully they make it to our market eventually.
Can't wait to get some of that new chain
Thank you for doing it in English , you English is very good...Many thanks
Excellent presentation, very clear and understandable. I hope to see some of that chain soon.
Your English is great. Better than some native English speakers:) Any idea when Husky and Stihl will release the 572 and 462 in US. Is the delayed release to the US due to modifications for US emissions or just simply not enough saws to release at once around the world?
Great videos, very informative. Thank You!
Is it possible to install the c85 chain on the stihl ms 462 chain saw?
Jag satte in iden att märka kedjan för underlättande av underhåll till Husqvarnas produktutvecklingsavdelning ett drygt halvt år före kedjan lanserades. Husqvarna hade troligtvis samtidigt kommit själv på samma ide eftersom dom inte ens besvärat sig att tacka. Eller så var det nån på produktutvecklingsavdelning som presenterade iden som egen.
Det är väl en självklart idé eftersom man alltid när man slipar i maskinen tar en spritpenna och ritar på ena länken för att inte gå runt mer än ett varv. Du kan ju få en annan idé av mig som plåster på såren och det är att på de sågar som har en generator , dvs G-modellen, så designa en 3-d printbar ljusdiod som sitter på sågen. Varför? Ja det är mörkt halva året . Drar någon watt i effekt så märks inte men underlättar när det är skumt ute. sök mönsterskydd för detta och sälj sen in detta till husky eller sälj som privat tillbehör. Att sitta och gnälla hemma på att ngn snor ens ideer när man inte gör ett skit själv för att realisera dom är inte okey så nu har då fått en ide som är betydligt bättre än att sätta ett streck på länken.
Thanks for the English!
Die x-cut c85 schneidet mit den Kantenschliff super
Good video. Also, your English was just fine.
if you need a golden strap to tell you where you started sharpening then there is a good chance your chain isnt sharp.
Or its already sharp and your chewing up teeth for nothing !! 😂😂
do husqvarna make x cut in a rip chain
Your english is good. I enjoy the videos and information.
You have perfect English, thank you for a wonderful video.
Thanks mate 🇬🇧🇬🇧
your english is very good , ive seen a lot of your videos and get through it well even thought its swedish , but now you do it in English it will cover a lot more countries , so great job done there , keep them coming
So annoying! Not your video but I’ve just bought new H42 in 18” and 20” for my 555! Damn bad timing or what?
Great information here, very clear, just as it’s “getting that time of year again” 👍👍
Thanks from everyone who appreciates Husqvarnas technology.
WOW. Had no idea these were out. Thanks for the informative review.
+John Harrison Hi, unfortunally C85 is not yet released. It will reach global market early 2018.
Thanks - that explains why I could not find. I'm looking forward to the release. Love your channel.
Minding your not from England! Your English is very good. Easy two understand! Keep up the good work! Keep safe..
your english is good. the saw is badass.
Thank you Flatzout!
With the new xcut chain can it be used on a 372 xp without changing the bar and sprocket
Here's to hoping for a S35G x-cut.
ZombieFighterOf2001 Hi, yes, that is probably the next model out of the factory in Husqvarna.
Stihl chaps and all else husq gear but thank you
wow big difference
Looks the goods
Red squirrel, Great video and thanks for your good English
acacia cut zero in Hungary !
Tyto ukazky jsou krasne proc to neni v cestine vsichni nejsou anstsjni
Wow what a waste of a tree lol