Shop Time - Traxxas UDR Diff and Planetary MOD
Вставка
- Опубліковано 22 сер 2024
- 🎓Kev's ebay Course - kevin-talbot.t...
🚗Check out Kev's RC Basher School - kevin-talbot.t...
Follow me on instagram / talbotkev
Like and follow my Facebook page see videos earlier! / kevintalbotvideos
Check out my Business Channel: Kevin Talbot BIZ / @kevtalbot5356
Videos Uploaded most days, Subscribe so you don't miss them :)
My Gear
Drone: click.dji.com/A...
Cameras Canon 70d, sony RX100, Samsung Galaxy s7, s9, gopro hero 6, hero 5 session,
PC: i9 64gb 1080ti 3x M.2ssd Premiere pro cc
#kevintalbot #rccars #rc
Kev you should try to fabricate your own rc parts
It’s so cool how Kevin knows how to fix all these rc cars
i do as well 😊 it's easy after a couple years😀 I have built my own
I do it you just got to have the balls to do it and not mess it up lol
Found the sound affects at the start funny and good quality video. CANT WAIT FOR THE NEXT!!!!
Happy to see there wasn't too much sand in it. Looking forward to the center and front video.
I love this car it's my favourite rc car of all time since it came out. One day kev one day haha when I do your SICK eBay course I should be able to get it lol
I am glad I caught this video! I was stuck on removing my front differential. I removed my rear one and did the seal like you did, but I added a bunch of grease into the planetary gear system and ran some into the axial on both sides and some seal. So far, I have gotten an extra 3 miles in speed out of it. Now that I get how the front one comes out I am going to grease that one up as well and see if I can beat that 35 mph top speed! Thanks, Kevin!
Great job Kevin, another great repair/upgrade vid. Glad you got the Center drive replaced with the aluminum one. Mine is great, no issues but I don't go as hard on my udr as you do. I figured this would be a good test for your udr and your bashing sessions. My car isn't a shelf queen, I just don't jump as high as you take your cars.😊 BTW I agree about the aluminum trailing arms. If they break the body or frame, the frame would be a pain in the a$$ to replace..Thanks for sharing dude👍🏿
Kevin this is why I subscribed to your channel to watch you work.!!
My diffs looked about the same on my udr. I was hearing things about sand tracking up the axle tube. But looked good. I am going to get a better motor for that vanquish speed run...let me know
I think a mini rustler would look so cool
8:50 AHHHH i was wearing headphones 😂 😂 😂
This last sound effect whas just perfect for my headphones
Nice sound effects when removing the tires Kev! Good video as always dude!
I've heard that about the sand but no issues here in California. Informative video. Baffles me on the thumbs down when all you're doing is trying to help people.
Love the wheel sound effects
Would you do a quick video going over what all the suspension and drivetrain mods are that you had to do in order to keep it from flipping so much. Just a basic overview of all the mods and a quick explanation of how you did them.
When will you build your own rc car
no idea
@@KevinTalbotTV if you do then make a monster truck!!
ClarkesMadRc's he’s already making a real monster truck 😁
Josh Moore but he’s talking about an rc not a real one
Hi Kevin. You probably don't read my comments at all. I wanted to say thank you for doing this video on the rear differential. I did this job this morning on my UDR and sealed it like you did. I also, regressed the whole differential. The job worked out well and maybe just because I don't have the body on. I was using my 4s Lipo and was getting my truck on 2 wheels a few times. I am so shocked and totally jagged at the same time!
Thank you for putting out this video! It helped out so much!
I try to read all comments dude, glad i could help buddy
@@KevinTalbotTV nice! Thank you good sir for the reply and all your help!
I watch all of your videos keep it up love your videos
The sand comes in from the wheel hub end I found. I filled the axle with grease to block it 🖒🖒
4:04 don't think a lot of other people would agree
Thoroughly enjoyed the pneumatic ugga dugga
Probably got some silicone sealant in the gears mate, once it hardens bits will break off and gum up the gears. You would of been better off using marine grease.
Hi Kevin 🤓! I'm really enjoying your videos! Especially on the UDR. I'm going to scratch build my UDR and you're saving me so much researching. Thanks for your videos 🤓!
Cool video
I’m sure you’ve heard this before but varsol is better for cleaning plastic because it isn’t as harsh, also simple green is a good one
Your videos are absolutely awesome 😎
Love it I like the idea of a four-wheel drive but I run a 2 wheel drive slash low maintenance easy to fix
Udr is already unstable enough with 4 wheel drive
Amazing video man! Great editing skills and awesome presentation. Thank you! I have lots to learn lol :)
Very good maintenance TRAXXAS my favorite 👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼🇨🇺
kev for silicone lsx (plumbers stuff) is strong and comes in a small tube :)......and dries clear
This is Kevin "I'm gonna just sorry a little bit of brake cleaner on my nuts to clean them up a little" lol
I’m sirprised it looks that good after that burnout
So did the sealant and stuff work just got a udr
I like the sound effects great vids keep, it up
Good job! Liked the sound effects and music 😄
Hey Kev the gloves are smart rc can be very dirty love the UDR videos keep up the good work and enjoy the hobby
You should invest in a small parts cleaner. I use one from harbor freight it work awesome for my rc parts
I am Dutch and love your video's thats why i have subscribed
The sand is getting in the diff through the axle tubes..Fill them with utterbutter grease..
Cool video because of you I’m upgrading an rc car
Lov you channel can’t wait to see the rustler 4x4
He’s wrenching 😂 another great vid 👍🏻 how did you find the power HD servo I seen you use on another car?
Kev u could have used those gloves for shopping for food and essentials such as toilet paper. how did you not predict this virus happening and stock up kev :)
8:51 GUN SHOT
Can u get a wltoys 12428 and then do all metal dears and just put a massive bl motor in it and see what it takes to break it?
You may have cooked the motor in the UDR a bit. What do you run for motor and battery setup in that? That might help my diagnosis.
Rpm said they are about to release udr parts, probably the best option for the trailing arms
Dont worry i wear gloves too
seen a few comments on other channels about grit getting inside the transmission, front and rear diffs. So before taking mine out, spent a couple days this weekend tearing mine down and seeing why and if I could prevent this. I think what is happening and probably can't see it unless using a high speed camera to record it, the components flex during impacts, creating gaps between the mating surfaces. How else can you explain particles inside that can't fit between the surfaces normally? For now just a liberal application of Marine Grease before reassmbly is what I am doing. Odd that it has a silicone seal at the rear output of the transmission, but none on the front or either differentials input. Hope your solution works.
I also suggest that you find another choice of cleaner rather than Brake Clean. Where I work we have used it to clean up oils and fuels.. when it comes into contact with plastic polymers it has made them brittle and prone to cracking. Most especially polycarbonate.. several pairs of safety glasses and wristwatch faces have been damaged by overspray and splash. Now we just use Grez - Off.
You should make a special music video with the traxxas udr, looking as scale, real and smooth as possible 👍
Nice video kevin
Gpm makes solid parts
Instead of using silicone seal you can just use any grease to do the same thing. There will be no water and dirt, but there is much easier to work with grease, instead of sealing🤷♂️
Kevin, can you use electrical contact cleaner like you do brake clean? I have a brand that doesn't break down plastic.
You need 2nd shocks in rear or not? Can you install and show how much nice is it?
That would be cool if the disk brakes actually worked...you could use a servo and stuff. Kev can you try it out?
Thanks for your good video and informations
Hey Kev when is your RC store going to be up and running? Online and you should sell merchandise even if it’s just one shirt
Vid idea : make a flying ish rc car!!
Lol that's the majority of his bashing videos
I love watching your videos! Best regards from Sweden.
I can’t remember.... did you do a GPS speed run pre-burnout?
quic bearn but of my head phones Kev!!!
good work.
Tip!
Clean the outside before open it.
Is the rear outer axle bearings pressed on or somethong!?? Thats gonna be fun swapping them out on mine=/
Hi friend, I'm from Brazil and I have some questions. I would be very happy if you would help me! I have already discovered that it is necessary to apply grease to the outer gears of the differentials, but I really wanted to know if I should also grease the gears of the engine. Example: 6448 parts: Spur gear, 8985: Input gear transmission, both from Traxxas Maxx. Another question is that the center differential gear comes into contact with a motor gear, should I grease it too? Part 8988. Inside Driveshaft 8949, do I also need to apply grease?
Hi Kev
I am a fan of you and I am from austria
Kev you should do udr vs the slash
Hey kev, wy you don’t put some lights in you rc cars??????
Hi what weight of diff oil and shock oil do you run on your udr thanks
Kev use some good grease blue or red rcs always have cheapest crappy black grease
Which is the dificultiest rc car to fix?
Kev, what diff oil do you use in your X-Maxx? If you say "stock", what is stock? I hear 10/30 and some say 30/50? Thanks! I really like your videos!
I can't remember dude
@@KevinTalbotTV 🤦♂️
Man please tell me that 4 screw wich keeps the both side left and right of the rear dif case. Have importance what way you screw them? From right to left or left to right? Have same holes on boths sides.. has importance?
Makes me really jealous seeing you have fun with your trucks and cars mine never work of me I have a hpi savage 4.6 with a dynamite .28 big block and a ton more upgrades it just never works for me
Any tips on what I can do
Watch botajell on you tube plenty tuning video s i have savage too new roller sitting as shelf queen for years nitro exciting but is can be tempermental
Hey Kev don't you have a slash to, if so how does it bash an what do you think about it. You've got so many rc's and I've watched so many of your videos it's hard for me to remember which ones you have and if I've watched a video of it!! LoL.... Awe yeah if you have one what size motor and esc are you running in it!!?? Which is your favorite one to bash with since you got the UDR and the Erevo???? I love the erevo, I think it's a monster for bashing, that's just my opinion though..
that what I'm doing to mine right not and little upgrades here and there just the front drive I got the Hot racing center front drive
Do you not need oil in there?
Kevin, whats mean digits on DeWalts ?
ha ha
just put on a new glove Kev y"ll b alright
i didnt think anyone else was willing to use sealer on there RC , cheers Bro
My rear axle seems to wobble abit and connection to the diff is also seeming loose
Love the impact gun noises lol
Also just a heads up, brake cleaner is really bad for you be really careful not to breathe it
Wait do those brakes actualy works also i think it's cool that you wear gloves it looks professional and I love the sound affects and editing your owesome kev!!!
No thay dont thare for looks
@@beast_slayer-bf9yg thanks. Now I'm going to cry in a corner
But you dont need a working brake it still has braking
@@beast_slayer-bf9yg yeah I know lol
wagwan kev
nice video
I like your video
Sou brasileiro e gostei muito dos seus videos
Love your videos
I repaired Diff and Planetary and I noticed a decrease in speed. Did you experience the same?
What kind of grease do you use?
How dose one get a screw that is stripped on the inside of head
Awesome
Could u pls get a Traxxas slash 1/16 4x4 and compare it to a similar £100 RC from a toy store (non hobby grade) like u did with the x-maxx
maybe one day dude
Kevin Talbot pls dude!!!!
And then do a burnout comparison
Kevin you should get the mini slash or erevo mini
Awesome video
What’s up Kev, can you do a trx4 bash again? 👍
Cool!
What is the drill you are using
Do those brakes actually work?
na, shame
hi kev i was just wondering i have a helion select four 10sc with a bright green proline ford body on and my rear axle pin has came out and idk what size it is😣 help!!