Quick question for you guys, is there a particular thing you'd like me to make a video about that's related to Carl-bot? Let me know in the comments and I'll eventually make it a thing.
Apologize for the late response, but yes it is possible. Highlighting roles in an embed is by doing: Of course replace "RoleIDHere" with your role ID (make sure Developer Mode is enabled)
In Discord, press Ctrl + Shift + I. It'll open the Developer Tool. At the top left of the Developer Tool there is a mouse arrow inside a cube with rounded borders. Click on it, and then click on the profile picture you want. It'll redirect to the code part on the Developer Tool, open some brackets and look for a image link with .png/.jpg at the end, right click and *Copy Adress Link* and it's done. Just put that link where you want it to be. You can also increase/decrease the size of the image, on the link will probably have a *=128* , just increase/decrease in multiples of 2 (64, 32, 256, 512...).
I show it in my second video about welcome messages. At some point in the video, I share a screenshot of the syntax to mention channels, roles, users and custom emojis in embed messages. It's also available in the support server, whose link can be found on the Carl-bot website at the top.
It isn't broken. Make sure Carl-bot has the right permissions in the channel it should send it in. Also make sure to have direct image links as mentioned in the video, otherwise it will break the embed.
Question, does anyone know how to make it so no one can input commands for the bot except in a certain channel? I mean so where it can interact/send greeting messages in other channels but no one can interact with it outside of it's specified channel
You're better off joining the support server to ask a general question. To answer briefly, on the Dashboard, you can specify bot channels in the settings, as well as configure which features or command are restricted to that bot channel, or per command.
A video already *is* an embed. You can't embed an embed, therefore that is not possible. The only thing you could do is automatically retrieve the video's thumbnail from UA-cam in the image URL field and have your video link as a hyperlink in the embed's description field, but that's as advanced as it can go.
You can do just that with the "cembed" command and directly give it the pastebin link. Read more about that command in the Documentation, and search for it in the support server as well.
Make sure Carl-bot has the permission to read and send messages in the channel it should send the embed to. For more questions, please head over to the official support server that's on the website
To mention any channel in an embed, you need to grab its ID first (make sure Developer Mode is enabled in your User Settings under Appearance / Behavior on mobile) and then put it in that form:
Quick question for you guys, is there a particular thing you'd like me to make a video about that's related to Carl-bot?
Let me know in the comments and I'll eventually make it a thing.
Quick question how do I add roles into the embed message?
To show in the actual embed measage
u r a good person thank u hope u get 1million subs or more
I appreciate your efforts having made this tutorial. One note, "jiff" is a peanut butter. "Gif" is a file format.
Both are correct to pronounce.
@@Asty__ No, they definitely are not. lol
@@Jethco jemully.com/gif-pronunciation-hard-g-logic-doesnt-rule/
ahhh i was having so much trouble with this! thanks for explaining!!
But that’s kaede’s lie isn’t it?
Thanks my man!!!
My pleasure!
yo
you sound like hyunjin from stray kids.
Wait now that you mentioned it yeah he does
@@ainadayana5432 ikr i couldnt stop freaking out about it when i first heard his voice
oml yea he kinda does
Thanks for explaining this xD
Thanks for explaining
Thx bro this helped 100%
you have help me out a lot to set up my server
I'm happy it's the case!
Thanks!!!
Super helpful
Thank u.
Ps: i dont see the preview
Is it possible to highlight roles in the embed when typed through @‘ing the role?
I wanna find that out too.
Apologize for the late response, but yes it is possible.
Highlighting roles in an embed is by doing:
Of course replace "RoleIDHere" with your role ID (make sure Developer Mode is enabled)
@@Asty__ ok thank you
it only shows the role ID and not the role
Good video and information! Thanks ッ
Happy to help!
Tysm this helped me soo much
for the thumbnail, how can i use a person's profile picture? Also for title, can i use a person's username?
In Discord, press Ctrl + Shift + I. It'll open the Developer Tool. At the top left of the Developer Tool there is a mouse arrow inside a cube with rounded borders. Click on it, and then click on the profile picture you want. It'll redirect to the code part on the Developer Tool, open some brackets and look for a image link with .png/.jpg at the end, right click and *Copy Adress Link* and it's done.
Just put that link where you want it to be. You can also increase/decrease the size of the image, on the link will probably have a *=128* , just increase/decrease in multiples of 2 (64, 32, 256, 512...).
@@AmodeusR Or just !avatar @user to retrieve it
aren't you that guy who makes the rlly good tags
how can i save the embed settings after posting the thing
can i make a template?
How would you put roles in the embed messages?
Use this custom command: carl.gg/t/120698
Then get the ID of the role, and do in the embed, there u go
How can I @ roles in the embed message?
I show it in my second video about welcome messages. At some point in the video, I share a screenshot of the syntax to mention channels, roles, users and custom emojis in embed messages. It's also available in the support server, whose link can be found on the Carl-bot website at the top.
does anyone know how to have gifs appear when banning and muting someone?? we can’t figure it out.
How to add role in embed messages
@Thund_Error and how do u use , custom emojis
question , when ppl join it doesent upload ?
I think for now (February 2021) It is broken because it isnt sending the Embeds to the server :(
It isn't broken. Make sure Carl-bot has the right permissions in the channel it should send it in. Also make sure to have direct image links as mentioned in the video, otherwise it will break the embed.
@@Asty__ Thanks it was the Channel permission :)
i wanna ask how to make embed msg with a trigger from which we dont have to go to the site to always send it
Use the embed builder in a trigger or a tag on the Dashboard depending on what you need and it will save it and trigger on what you specified
@@Asty__ tysm i was trying from so long
Hi Asty, nice video thumbs up. Can you show me how to embed a clickable channel link (#rules) in this message, thanks in advance...
Thx, solve it already...
@@barcksy how? I have the same question
I do show it in the video though.
how do you add spoilers in the embed?
The same way as you would do in regular messages. Note that only Description fields in embeds support Markdown.
cant I just upload pictures as icons and dont need a url?
Can you #(channel) in a embed message?
My last video shows how to
@@Asty__ Aight ok
can you make multiple embed messages? If so then how?
Question, does anyone know how to make it so no one can input commands for the bot except in a certain channel? I mean so where it can interact/send greeting messages in other channels but no one can interact with it outside of it's specified channel
You're better off joining the support server to ask a general question. To answer briefly, on the Dashboard, you can specify bot channels in the settings, as well as configure which features or command are restricted to that bot channel, or per command.
Thank you!
How can I make a normal message?
Either with the !echo command, or by typing in the Content section above an empty embed in the embed builder of the Dashboard.
But bro how to add some animated emojis there
Neil Star Gaming in embed? Well you type their ID
Your PC program is Windows 7??
My OS is Windows 7, yes.
@@Asty__ hey will you send me a Friend Request? My ID is-@𝖃𝕯𝕻𝖆𝖑#9228
how do you add a title with extra space?
how do i put emojis into the embed
I show it in the video. Around the end mostly.
I want to add a playable video in my embed. Is that possible?
A video already *is* an embed. You can't embed an embed, therefore that is not possible. The only thing you could do is automatically retrieve the video's thumbnail from UA-cam in the image URL field and have your video link as a hyperlink in the embed's description field, but that's as advanced as it can go.
how to mention in channels in embeds of carl bot discord? tell me sir!
I show it in my new and recent video
@@Asty__ Ok I'll watch it
Also, can Carl bot read my text in the pastebin link and convert past that text in embed?
Wanted to ask this in the support server but you know these days.... 😭
You can do just that with the "cembed" command and directly give it the pastebin link. Read more about that command in the Documentation, and search for it in the support server as well.
why dont my embed send
Make sure Carl-bot has the permission to read and send messages in the channel it should send the embed to. For more questions, please head over to the official support server that's on the website
U deserve alot more subs
how did you get the preview?
If you mean the one in Discord, it's with the "testgreet" command, which I show in the video. If you mean the one on the Dashboard, it's just there
@@Asty__ alright thank you
Channels how do u put channels
To mention any channel in an embed, you need to grab its ID first (make sure Developer Mode is enabled in your User Settings under Appearance / Behavior on mobile) and then put it in that form:
@@Jasonic_UA-cam
Just put a \ smbol before channel name
Like: /#general
Do it in discord and it will provide you channel id, then paste that id in embed builder
The \:emoji: doesn't work for me...
Use ```[emoji]```
Example : ```:nou:```
cool video) thx)))))
when i post the pictures, they're really small
Depends on size of image.
@@Social_Den i will literally put a 2056x1440 image and it will still be small
@@SynthWaveSC what website/app you use?
@@Social_Den chrome
@@Social_Den chrome
is there a way i can include emojis and @ roles i have in my server?
Yes
Can i use this as a welcomer?
It would work the same way to welcome your members, but instead of it being in the "Embeds" page of the Dashboard, it's in the "Welcome" page.
How to Add Emojis
I actually say it in the video
Is this only for Premium Carl bot
No, that is in the completely free version of the bot. Follow the steps on the video and you'll see that it works for anyone.
@@Asty__ ok good thanks for the tutorial i dont know that Carl bot have a embed creator
DOT JIF ??
Whatever
How do you add like a @ in the embed? Like you can tag roles.
But after the & there has to be the role id
Example:
emb'ed... I could go on but I know I'm not the only one cringing.
:shrug: