Requested Video on how to repair XC24S V2 LCD. The LCD screen is flickering. Tips and Tricks. Please like, share, and subscribe. • N-Vision XC24S V2 othe...
Good job sir i aint technician but i did it hahaha since nvision ph says that its no longer covered with warranty eh sinubukan ko to kesa mag bayad ng 4k for replacement of panel etc na sinasabi nila. Thanks sir yun nga lang nagkaguhit sya sa mid lower ng 2 lines
Hello tevz tv. It works.!!! Hahaha God bless u. So easy. Ive done it. My monitor is already in garbage bag ready for disposal . I tried your method and it works. Hahahah. Thank you very much
idol tevz...same problem po..same pcb layouts..then i cut..gumana po cya..after 2 weeks bumalik sa dati problema...what next i can do pra nmn mgamit n muli monitor..thanks!
Ingatan mo na boss ma Over use or over heat. Dun kasi ngsimula sakin. 8hrs ata ko gamit ng wala manlang hangin or lamig kaya ayun sobrang init tas biglang nasira screen.
Hello, please help me. I have the same monitor with the same issue, I did scratch out the lines as you showed on the video. But after that only the right side which is clear the left side still has horizontal lines.
Thanks！ it really helps! Just don’t understand the concept behind, why is cutting the board will get rid of the flickering tho? Do you mind explain it in layman term pls? 😄
The LCD panel has a two-gate signal on the left side and right sides of the LCD screen. the left and the right gate signal is connected in parallel. If one of the sides has shorted gates, the screen will flicker or distort the image. If you cut the shorted side, the image will be normalized. Because the connection is parallel, The LCD still has the other side work. But the side has the shorted will be darker or like lower resolution. I hope have explained it in layman's terms.
yung akin XC24S nag ooverheat bigla nagka horizontal line hinipo ko ung part gilid na nagkaline sobrang init parang nag babaga sa init nakakapaso pag nag tagal ung pag hawak. grabe ano maganda gawin dun idol. new subs here
Sir nvision IP240 monitor ko may colorful vertical lines siya dahan dahan lumalabas depende sa color nung nasa screen tas magaspang yung display niya, possible pa rin po bang may shorted na gates? cutting method pa rin po ba pag ganun? Thank you sir.
Sa akin boss hindi parin kaya ayusin ng ibang techinician , paano po malaman kong anong clasi yung circuit board niya model : xc24s yung sa akin? Pareho lang ba yung mga circuit board sa xc24s v2 ?
Sir may page po ba kayo papatulong sana ako sa monitor ko xc24s v3 iba po kasi yung board nung sakin hindi ko alam kung saan yung need icut na lines salamat po
Hello sir! Nagbabaka sakali lang, nag gagarbage display din kasi ang Asus VP249QGR monitor ko pero hindi sya nag fflicker, ma rerecommend mo ba na gawin ko din ito? or may ibang method sya para dito? yung 2% sa taas ng screen lang ang okay the and yung 98% sa baba garbage display na. pag nag 60hz ako nasisira sya pero pag naibalik ko sa 144hz umaayos pero may dead pixel mahabang vertical line sa taas.
Paano pa gagawin kung magpapaayos ng monitor saka magkanu po kaya bayad? From Malabon City po ako. Kaso ung akin po ung unang version pa ng NVISION na gnawa nyo nung dating video nyo
haha grabe nakachamba ko sumugal ako mag cut sa right side. 😅 luckily ayun fixed. thank you sa tutorial sir! 🎉
boss ano model no. ng board mo
@@michaelpimentel8181 same boss yung model ng monitor xc24s. yun din ba boss yung board?
@@ezailbron perhas dn sakin gumana now, kaso bumalik ulit try ko cutting wala na haha syang
@@michaelpimentel8181 need yata hinangin yung unang cut kung di gumana.
You're a life saver sir! Thank you so much!
Sana tumagal tong fix na to from my end 🙏
God bless sir!
Happy to help
Update?
Good job sir i aint technician but i did it hahaha since nvision ph says that its no longer covered with warranty eh sinubukan ko to kesa mag bayad ng 4k for replacement of panel etc na sinasabi nila. Thanks sir yun nga lang nagkaguhit sya sa mid lower ng 2 lines
good job congrats
It work brother hahaha thanks a lot man diko expect na gagana sya pero gumana talaga sya. . God bless you sir
Congrats! Please share the video.
ok pa rin ba monitor mo ngayon?
Salamat sir . naayos ung akin. More Blessing to come sir.
Need ba eto putulin ang linya
oo pre. kaso bumalik ulit sa dti ung issue.
Salamat boss! Just to confirm this method also works on Viewpoint 24S1 models with the same kind of board. More power to you sir!
Thanks for the info
ayos talaga to na video... 10000000000% WORKING po... maraming salamat sir...
Thanks too
Hello tevz tv. It works.!!! Hahaha God bless u. So easy. Ive done it. My monitor is already in garbage bag ready for disposal . I tried your method and it works. Hahahah. Thank you very much
Congrats
Good work sir! Sana po ay gumana din itong fix sa board na CCPD-T5238-002 V3.0 (yung board ng mga naunang model ng XC24S😅)
Slamat po boss na repair ko yung akin. Thanks you so much!
Salamat boss ginaya ko ginawa mo gumana monitor ko subscribe ako sayo dahil dto salamat boss!!!!
Thank you for sharing this sir.. naayos na monitor ko..
Please like share and subcribe. thanks
Boss nung naayos monitor mo ok paba angang ngayon?
@@valrivera1116 yes sir, okay na okay pdn sya, never na nasira yung display
Good great best job thanks for sharing 👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾🙏
MARAMING SALAMAT BOSS. NAKATIPID AKO KAHIT PAPANO, MORE POWER SAYO BOSS
nice
Sinubukan ko sa XC24S ko same board kaso digumana pero thank you pa rin lods
Same din lods hindi nmn gumana
ak240c curved sir okey salamat ng madame
nice video
gumana sir salamat, muntikan na matapon. hope sana magtagal
Great job sir
how you are taking this much clean video pl suggest
Please share a link to buy single cut led 2watt
this works!!!!! amazing,,, THANKS a lot!!!
Pease like share and subscribe.
Great work po boss! May tutorial po ba kayo sa issue about horizontal lines? same monitor
eto lang pero ibang model ua-cam.com/video/Gk83CwKsVDk/v-deo.html
Good work sir 👍
Thanks 👍
Do you have a fix for XC24S V2 blinking led light and no display?
TRY replace the power adapter.
It works sir tho it have horizontal lines and still some glitches on the lower part. anoi kaya problem nun sir?
Ganyan talaga, hindi lahat perfecto.
idol tevz...same problem po..same pcb layouts..then i cut..gumana po cya..after 2 weeks bumalik sa dati problema...what next i can do pra nmn mgamit n muli monitor..thanks!
wala na resolba pag ganon.
@@tevzTVTevatronics ...ouch...😐..neway thanks po ..
Ingatan mo na boss ma Over use or over heat. Dun kasi ngsimula sakin. 8hrs ata ko gamit ng wala manlang hangin or lamig kaya ayun sobrang init tas biglang nasira screen.
Hello New friend here watching now and sending my full support from hongkong
Thanks for coming
Great video. How did you get the trick? What's the logic behind it?
Hello, please help me. I have the same monitor with the same issue, I did scratch out the lines as you showed on the video. But after that only the right side which is clear the left side still has horizontal lines.
tq boss u are my live safer now i can play forza horizon back🤣🤣🤣
Hi sir I also have the same issue do you have a contact and do home service?
Thanks！ it really helps! Just don’t understand the concept behind, why is cutting the board will get rid of the flickering tho? Do you mind explain it in layman term pls? 😄
The LCD panel has a two-gate signal on the left side and right sides of the LCD screen. the left and the right gate signal is connected in parallel. If one of the sides has shorted gates, the screen will flicker or distort the image. If you cut the shorted side, the image will be normalized. Because the connection is parallel, The LCD still has the other side work. But the side has the shorted will be darker or like lower resolution. I hope have explained it in layman's terms.
@@tevzTVTevatronics short on panel or IC?
@@konspirasiglobal6164 On panel
@@tevzTVTevatronics p
@@tevzTVTevatronics sir pano ko malalaman kung left or right side ang icut ko?
Salamat lods.. working subs kayo dito mga tol. 👌 Angaaaas
Sir bakit kaya after a year nag flicker ulit??
Sir tevz nag flicker ulit ung ganyang method after a year ano po kaya naging sira ulit?
What if po ginawa ko na to. Then gumana. After awhile po naging ganon ulit. Need ko po ba icut pati yung kabila?
no. baka talagang totaly damage na yung panel nia
Salamat master
welcome.
sir this is also works on Fonudar monitor?
if they have a similar board it will work.
Nice 👍
Thanks ✌
sir meron akong nakita nilagyan ng resistor san banda lagyan?
hello sir same lang po ba eto sa in27c18 na model? may horizontal po kasi now
working din po to sa pag may 1 vertical line sa middle ng screen? same. model and brand po
it does not work on me ??
I tryed this method and works, but the black color become red-ish, what do i do wrong?
its works but suddenly after a few fays its comeback again the issue . why is that happen ?
sir meron din po ako ganyang model pero iba ung itsura ng board, pano ko po malalaman kung alin dun ung ckv line?
May iba pa akong video check mo?
Nvision IP23D1 may problem nadin po dyan na monitoy? planning to buy kasi around 5k lan siya. thanks
wala pa akong na encounter IP23D1
@@tevzTVTevatronics i see, lahat po ng monitor nila same problem lng? and similar set up? thanks
Boss same lang ba yan sa horizontal line ? Same brand and model kasi
horizontal lines hindi gagana sa cutting.
@@tevzTVTevatronics oo nga boss nag try ko kanina . Need na ata palitan
Lepas buat x hidup terus 😅. Armageddon pixel pf24hd ss
may xc24s po ba kahit anong board
2 type na ginamit sa xc24s at xc24s V2
tried this but doesn't work. pwede bang ipa repair nlng sayo sir ? san po ba location nyo ?
Laoag city
Saan shop mo? Thanks.
Laoag city
same problem sir but kung sa entiire window na sya is nag iitim sya at nag freeze
ibang issue na yung iitim.
Boss need ba matanggal ung copper dun sa line
Inportante mag hiwalay yung cpper line
❤❤❤❤❤❤❤❤❤
yung akin XC24S nag ooverheat bigla nagka horizontal line hinipo ko ung part gilid na nagkaline sobrang init parang nag babaga sa init nakakapaso pag nag tagal ung pag hawak. grabe ano maganda gawin dun idol. new subs here
baka pwede da cuuting method
Sir pano po pag ung sa side ung naCut mo? Pano mababalik? Gusto ko kasi itry sakin same din ng issue.
Boss pano po malalaman kung left or right ang puputulin?
Thanks po
Malalaman mo na pag nag putol kana
@@tevzTVTevatronics HI Sir Do you do home service?
@@titocubillas4093 Where is your location?
Kung maaayos ung issue sir, may posibilidad ba na bumalik ulit ung issue?
May hindi mayron din oo
Ginawa ko po yung ginawa nyo idol pero after a few days nasira ulit ano napo gagawin?
ganyan talga yan. may tatagal may hindi.
Sir tevs pwede po ako mag request ng update sa nvision monitor mo po? Curious kase ako kung gumagana pa ba ang monitor mo hehe TIA
pinagawa yan sakin, hindi pa naman bumbalik.
nice content po from lyra
Thanks for visiting
I tried this method. Why is it not working?
does it also work on vertical lines ? thanks
same model sir
Maybe
Pwede po pa repair saakin sir same model lang den same poblem pa
Lods bkt po saakin ayaw, same v2 po. Dinisconnect kopo dun sa same spot na ginawa nyo.
i dogtong mo yun na cut at try mo sa kablia. pag ayaw parin. ganon na yun hindi lahat nag wowork.
Salamat sa pag reply lods. Ipapa connect ko muna sa marunong hahaha.
Follow up question lods. Yung pag cut ba dpat malalim? Or basta ma damage mo ng konti yung connection ma ccut na siya nun?
@@chinoscicincobus9923 pag nag hiwalay na yung line ok na yun, kahit hindi malalim.
Nung sinugatan ko kasi yung line boss, nabakbak na yung green layer pero after nun green layer visible parin yung pinaka lines.
Sir nvision IP240 monitor ko may colorful vertical lines siya dahan dahan lumalabas depende sa color nung nasa screen tas magaspang yung display niya, possible pa rin po bang may shorted na gates? cutting method pa rin po ba pag ganun? Thank you sir.
Di lang ako sure, pero karamihan shorted gates ang dahilan.
Boss, ano pi dahian bakit bigla nag glitch monitor?
problema sa lcd
Mabalin uray anya nga monitor dayta sir?
Basta agpada da ti panel mabalin sir.
ip24v1 nvision what about this bboss
It can be done.
Nag try ako boss di pa din nawala ung mga Linya ano kaya dapat gawin?
hindi na ma alis yan lines.
Sir paano po buksan tong screen ng monitor at napasukan kasi ng langgam ih
Sir sa v3 po na may horizontal lines at green and blue lines na horizontal
pag hindi gumagaw yung lines hindi na ma aayos
is it same as hugon brand?
I'm not sure
Sir san po shop nyo, may monitor ako curve 32inch china brand bigla nalang nawala display pero. May power po
laoag city
Sa akin boss hindi parin kaya ayusin ng ibang techinician , paano po malaman kong anong clasi yung circuit board niya model : xc24s yung sa akin? Pareho lang ba yung mga circuit board sa xc24s v2 ?
makita naman sa video kung anong klase ang board.
@@tevzTVTevatronics same tayo ng board boss 😅 pero kina cut ko ngaun yung ginawa mo pero hindi effective .
i connect mo ulit yong pinutol mo tapos sukan mo sa kabila, may mga hindi talag na aayus.
@@tevzTVTevatronics san banda sa kabila boss?
Hindi ko na video sa kabila
How to know the side, any tips? Greetings from Brazil
You never know.
Boss pag IC problema working to?
Hindi sir
Sir may page po ba kayo papatulong sana ako sa monitor ko xc24s v3 iba po kasi yung board nung sakin hindi ko alam kung saan yung need icut na lines salamat po
Hanapin mo Teva Electronics. Mag follow kana rin.
Nice
Thanks
@@tevzTVTevatronics why did you cut what type of signal or voltage is at that point
@@elroytucker1420 The lines that have been cut were the CLK and VGH ODD and VGH EVEN.
Location niyo po, sainyk konalang ipapaayos haha natatakot ako baka pag ako gumawa mali macut ko HAHAHA
Laoag City
boss applicable bato sa ip24v1 model ?
Pwede basta pareho sila ng panel top board.
Pwede po bayan sa asus vz239he
Basta pareho ng panel pwede
Pero nkagawa n po kyo ng gnun sir . Send ko po vid
Nilinis ko lang po kc ng pambura wala din po ng yari
@@AwTsu hindi pa
Last n po hehe pano po mallaman kung ano po ung pwede putulin my code po ba ? Maraming salamt po
Sir kaya pa ayusin shorted na board ng xc24s na monitor?
depende kung ano yung shorted component
sir pwede magpagawa sayo?
location po?
hndi gumana saken :( same model din naman at gayang gaya ko po ung pagkaka cut.
hindi lahat gagana.
Boss alam ka bakit inverted colors at mag flicker ang monitor ko? Viewsonic vx2770 brand sa monitor ko. Salamat!
negative color ba?
@@tevzTVTevatronics yes po
Bakit kaya ayaw gumana sakin sir?
hindi lahat na aayos, tignan mo maigi baka hindi ma ayos ang pag cut.
Nice po sir, pero paano po pag may lumabas na bar lines?,
Bar lines na hindi gumagalaw baka hindi na ma ayus.
Pa help po can i send po yung mother board ng monitor ko tapos identify nyopo kung paano ayusin
Iba kaseng monitor Sanc m2456h sya
Pano po pag walang display same model and brand po tayo. All black lang po talaga pero may power naman. Pa help po
Ibang issue na yan. Siguro back light.
Hello sir! Nagbabaka sakali lang, nag gagarbage display din kasi ang Asus VP249QGR monitor ko pero hindi sya nag fflicker, ma rerecommend mo ba na gawin ko din ito? or may ibang method sya para dito? yung 2% sa taas ng screen lang ang okay the and yung 98% sa baba garbage display na. pag nag 60hz ako nasisira sya pero pag naibalik ko sa 144hz umaayos pero may dead pixel mahabang vertical line sa taas.
Try mo sa method na to
@@tevzTVTevatronics Hindi naman sya masisira sir no? Basta tama yung mga ididisable ko na pins
Paano pa gagawin kung magpapaayos ng monitor saka magkanu po kaya bayad? From Malabon City po ako. Kaso ung akin po ung unang version pa ng NVISION na gnawa nyo nung dating video nyo
1k php dito ako sa laoag city
good day sir.. ganyan din problem ng monitor ko nvsion xc24s kaso iba yung board nya?? pano kaya yun??
may iba pa akong video check mo
Boss may ganyan akong tangap pagawa ko sayu
Dito ako sa laoag city
Sir same monitor gamit ko. Ginaya ko method niyo sir. Gumana naman siya pero after 2 days bumalik sa dati. Paano po kaya tix neto?
hindi lahat ma work at hindi tatagal, swerte na kung aabot pa ng isang taon.
Sir loc nyo pwede mag paayus
laoag city
boss ano rason pano gumana yun? may nagsoshort ba?
tama may short ang gate lines
Paano po sa IP24V1? Same issue din po.
Basta pareho sila ng board
sir may tanung lng po ako panupo ung n vison na khit na cut na ayaw pa din
try mo sa kabila, may mga hindi talga mag work.
Sir, bakit kailangan 7 lines agad yung puputulin? So far ok na yung monitor ko. Thanks
pwede ring isa isahin pag putol. pero dapat putolin lahat yung 7 lines para tatagal.
@@tevzTVTevatronics Thanks Sir
Sa IN24C25 Model pwede ba to?
hindi ko pa na try
Hindi gumana sakin boss
Hindi talga lahat ay gagana.