Restoration damaged and boxed speakers _ Revive the damaged speaker bass

Поділитися
Вставка
  • Опубліковано 10 лют 2025
  • Thanks for watching, subscribe & share!
    Restoration damaged and boxed speakers _ Revive the damaged speaker bass
    Please give me your opinion. Where is not good Let me improve.
    ------------------------------------------
    Thank you for watching the video. please support me. Thanks you very much. love everyone.
    #Restoration #JBL #diy #design

КОМЕНТАРІ • 90

  • @robertmceuen3630
    @robertmceuen3630 Рік тому +7

    I've used that speaker several times. Excellent. Great job on the re cone, and cabinet. That thing is gonna pump the bass.

  • @frankpaul3204
    @frankpaul3204 Рік тому +3

    I remember doing the same speaker reconing when I was in high school. Back then some parts were not easy to get so we even had to wind the coil from scratch. We saved so many speakers from ending up in the garbage.

  • @Mr.ky89
    @Mr.ky89 Рік тому

    Restoring and refreshing the steam speaker is great

  • @IDEALALENTEJANO
    @IDEALALENTEJANO Рік тому

    When I was a student, we also repaired the speakers, as we didn't have much money to buy other speakers. The reason is that we played louder than the speakers could handle. When repairing and disassembling, "WE ALWAYS COVERED THE space where the coil works with duct tape". It was the first thing we did. to avoid the WORST.

  • @YESTODEMOCRAT
    @YESTODEMOCRAT Рік тому

    Really make sence

  • @ReginaldDj1
    @ReginaldDj1 Рік тому

    Great work on building this Sub ❤❤❤❤

  • @gabrielcastellary5819
    @gabrielcastellary5819 Рік тому

    Good Job. ^^

  • @rejej200c
    @rejej200c Рік тому +7

    Unfortunately the video doesn’t provide any details on what’s used or where to obtain materials or w

  • @manoharan52678
    @manoharan52678 Рік тому

    Superb work. Sub design not appealing. Need to redesign.

  • @JBElectroMedia
    @JBElectroMedia Рік тому

    very good work..

  • @petersonbenonyangoh
    @petersonbenonyangoh Рік тому

    very ok like it

  • @SoundTechAsif
    @SoundTechAsif Рік тому

    Very very good 👍👍👍👍👍👍

  • @danielethier2015
    @danielethier2015 Рік тому

    Great work!

  • @brucetungsten5714
    @brucetungsten5714 Рік тому

    Great job!

  • @jetblakink
    @jetblakink Рік тому

    Beautiful!… 💗

  • @JoYurifan-eb2
    @JoYurifan-eb2 Рік тому

    Is this Mr Electricity's second channel? Kind of feela like it.

  • @HungLe-dz1jy
    @HungLe-dz1jy Рік тому

    Loa phun mà làm loa súp ❤

  • @CedricFlavien-bd8vc
    @CedricFlavien-bd8vc Рік тому

    The port is too Big, for this JBL 2206,. Not adaptéd ,. But good recone 👍

  • @mardulles5420
    @mardulles5420 Рік тому

    Good 👍

  • @АлександрСвой-п5д

    Який розчинник використовуєте для демонтажу? What solvent do you use for dismantling?

  • @ishusoundmusic1084
    @ishusoundmusic1084 Рік тому

    Very nice

  • @timhull8664
    @timhull8664 Рік тому

    Ha ha.. don't let water anywhere near your HiFi😂

  • @intershop87
    @intershop87 Рік тому

    Yêu bé toá 😂😂😂

  • @jovitoortizsanchez325
    @jovitoortizsanchez325 Рік тому +5

    Buenas tardes buen trabajo y una pregunta que liquidó le pones para despegar tan rápido el cono

    • @adriancuevasarana6202
      @adriancuevasarana6202 Рік тому

      También yo quisiera saber que producto es, ¿para que queremos un tutorial sin la debida información?

  • @일상-d1b
    @일상-d1b Рік тому

    좋아요.

  • @adriancuevasarana6202
    @adriancuevasarana6202 Рік тому

    Disculpa, Que producto es el que usa para despegar las partes? Gracias

  • @piratesofcarribean4211
    @piratesofcarribean4211 Рік тому

    JBL2226 is a gem

  • @robertocampos3746
    @robertocampos3746 Рік тому +1

    Parabéns acompanho seu trabalho aqui muito bom aqui Brasil

  • @gregrivera8520
    @gregrivera8520 11 місяців тому

    what is the name of that liquid solution that you use to remove the adhesive?

  • @tutaylam68
    @tutaylam68 Рік тому

    kĩ thuật đóng loa rất tốt

  • @AsAlamin-px4wc
    @AsAlamin-px4wc Рік тому

    Nics

  • @carmelocampisi7152
    @carmelocampisi7152 Рік тому

    What liquid compound do you use to release the glue

  • @tiemnguyenvan9834
    @tiemnguyenvan9834 Рік тому

    Bạn ở đâu vậy

  • @mariaraqueldossantos7739
    @mariaraqueldossantos7739 Рік тому

    Muito bom um like sempre

  • @roberthallas6964
    @roberthallas6964 Рік тому

    good job respect

  • @yuriyvvvisotskiy1981
    @yuriyvvvisotskiy1981 Рік тому +2

    Красивая,грамотная работа.Проблема лишь в том,где взять новый диффузор с готовым гофром !???

    • @ВладШаломов
      @ВладШаломов Рік тому

      афтар долбаёб - я уже 40 лет делаю ЧВ - пластиковая руба толщиной 2мм по диаметру дифузора длиной 150см резонанс 20гц и маса 200 грам! отдача 110дбвтм

  • @mrrichard1849
    @mrrichard1849 Рік тому

    Bravo l’artiste !

  • @subtam2693
    @subtam2693 Рік тому

    what glue do you use to attach spider to voice coil?

  • @valdevinodosreis37
    @valdevinodosreis37 Рік тому

    Boa tarde muito maravilhoso o seu trabalho ! Quantas polegada ele tem?

  • @michaelbyrne8860
    @michaelbyrne8860 Рік тому

    What fluid is in the bottle??

  • @echahbinabil1980
    @echahbinabil1980 Рік тому +4

    What is the primary material used to remove old materials?

    • @Kapparie
      @Kapparie Рік тому +1

      So annoying is it, when you pose a question you get a like, instead of a proper answer. 🤨

    • @puciohenzap891
      @puciohenzap891 Рік тому

      Hands, sometimes feet.

    • @aurofriganovic5683
      @aurofriganovic5683 Рік тому

      i used 2 different stuff, acetone and thinner, it depends on what glue was used

  • @luukhangluu611
    @luukhangluu611 Рік тому

    sư huynh thay voice coil thông số vòng dây coil cuốn rộng bn vậy.

  • @davidgrislis2893
    @davidgrislis2893 Рік тому +2

    good afternoon brother. Is the spray paint you used to generate a texturing? can i know which one it is? thank you

  • @leosmith848
    @leosmith848 Рік тому

    Never EVER scrape crap off a loudspeaker with the voice coil gap exposed: Always tape that gap up to avoid accidental muck falling in.

  • @АндрейЕмельянов-ж6с

    что за жидкость применяли при разборке и чистке?

  • @richardwright2461
    @richardwright2461 Рік тому

    Whst is in your bottle to loosen the glue?

  • @TY-by6zu
    @TY-by6zu Рік тому

    何処の国の職人さんですかね? 仕事の 工程は分かるのですが、全体的に仕事が粗いのが気になります。

  • @АндрейЕмельянов-ж6с

    чем пропитали динамик перед разборкой? ацетон?

  • @RavikumarPathivada-cm5lk
    @RavikumarPathivada-cm5lk Рік тому

    What is the oil name

  • @Arthur-pi3en
    @Arthur-pi3en Рік тому +4

    put on good music 80s

  • @ketnoidamme5
    @ketnoidamme5 Рік тому +1

    My friend, let me ask how much is that wine

  • @rabbu188
    @rabbu188 Рік тому +1

    what is that liquid that you in the beginning of the video to remove the speaker paper etc?

  • @maheshkumarprajapat1798
    @maheshkumarprajapat1798 Рік тому

    Speaker con remover salvent name plz sir

  • @swpowell1226
    @swpowell1226 Рік тому

    What is the liquid being used to dissolve the glue ?

  • @partodoank6888
    @partodoank6888 Рік тому

    👍👍👍👍👍👍👍👍

  • @tobi_rama07
    @tobi_rama07 Рік тому +2

    what was the name of the last spray paint

  • @andyk9685
    @andyk9685 Рік тому

    First step. Tape the magnetic gap before cleaning. Other than that, it was a shitty job. And the casing took 2,000 staples... pity! All this is far from artistry. For home made is OK.

  • @dilan1792
    @dilan1792 Рік тому +2

    Cómo se llama el líquido que usas para despegar el pegamento tan rápido

    • @alex88956
      @alex88956 Рік тому +1

      super glue extrem g23

    • @Clameni
      @Clameni Рік тому

      Denatured alcohol is usually used, better isopropyl alcohol, but it costs more

  • @abc-ni9uw
    @abc-ni9uw Рік тому +2

    Sort your video title out man

  • @Sergey_Kernis
    @Sergey_Kernis Рік тому +1

    Очень топорно отремонтирован динамик , особенно отводы с катушки , которые покрыты чёрным клеем на белом диффузоре портят вид всему динамику , конструктивно можно было бы гибкие подводы с катушки вшить в шайбу диффузор держателя и надёжно бы вышло в разы и вид бы динамика был бы отменный .

  • @rodolfoceron4347
    @rodolfoceron4347 Рік тому

    He visto que no llevan agaaradera o para sujetar por la parte de arriba. En caso se le pusieran llantas....?

  • @yesnerlopezmora6703
    @yesnerlopezmora6703 Рік тому

    cual es el liquido para despegar

  • @newpallapon2308
    @newpallapon2308 Рік тому +1

    Inggris
    Mungkin maksud Anda:
    maaf mas itu dempul box pakai bahan apa ya
    I'm sorry, what material do you use for putty, sir?

  • @sarragount5141
    @sarragount5141 Рік тому

    Quel produit avez-vous utilisé pour diluer les anciennes colle, cette question vous a déjà été posée et personne a su y répondre. Alors 1 fois deux plus, je la pose quel est le produit utilisé au début de la réparation du haut-parleur pour diluer la colle. Si quelqu’un le sait Réellement qu’il le dise. Merci d’avance pour tout le monde.

  • @НиколайЛапин-р9ж

    It's NON-original JBL
    Cooper voice coil,magnet system,color of cone
    China clone

  • @MarioMario-wh6ni
    @MarioMario-wh6ni Рік тому

    Site pliz bay this cone

  • @hamdzuii
    @hamdzuii Рік тому

    tiếng nghe như hạch.

  • @Shanachie707
    @Shanachie707 Рік тому

    😂😂😂😂

  • @iliy77.m
    @iliy77.m Рік тому

    ужас просто

  • @fourthlaxer4557
    @fourthlaxer4557 Рік тому

    useless vid without explaining what these liquids are!

  • @Dj.alk13
    @Dj.alk13 Рік тому

    C est quoi se son horrible

  • @maikl6920
    @maikl6920 Рік тому +1

    дерьмо..

  • @vejlivui5313
    @vejlivui5313 Рік тому +1

    Такое всё оно дерьмовое и ремонт, и динамик не тот для этого оформления и музыка не та.

    • @ВладШаломов
      @ВладШаломов Рік тому

      афтар долбаёб - я уже 40 лет делаю ЧВ - пластиковая руба толщиной 2мм по диаметру дифузора длиной 150см резонанс 20гц и маса 200 грам! отдача 110дбвтм