Panther Ausf. G Hermann Göring Division - Painting and Weathering

Поділитися
Вставка
  • Опубліковано 27 лип 2024
  • This is a painting and weathering video of the Tamiya Panther G done up in Fallschirm-Panzer-Div 1 Hermann Göring markings. This is much shorter than the Wittmann Tiger video and focuses more on the painting of the camouflage. I kept the weathering pretty light as these late war Panthers got knocked out pretty quickly. I ended up leaving off the spare tracks and cables just because the project had gone on too long. I can still add them.
    Music by PanzerJager V
    If you want to support my channel you can become a patron here
    / 3dscale

КОМЕНТАРІ • 265

  • @Dark_Asteroid
    @Dark_Asteroid 4 роки тому +10

    My father was in this Division and was a gunner in this tank. He loved it and said it was the best tank on the eastern front.

  • @PatrickMcTie
    @PatrickMcTie 7 років тому +53

    I really like the more subtle weathering that you do here Adam. For my taste, I don't think everything needs to look like it's been beat to shit, and then driven through a swamp.

  • @andrewjerome2157
    @andrewjerome2157 7 років тому +1

    This project turned out great! Love these videos and I appreciate the amount of work you put into making these!

  • @MrGameengineer
    @MrGameengineer 7 років тому

    Thank you for describing your painting process along with demonstrating it. So many painting videos show but don't really describe what they are doing. Very helpful Adam!

  • @laMoort
    @laMoort 7 років тому

    Adam thanks a bunch for taking your time to do the video like this, showing all the process and w/ voiceover it's really a treat to watch. warts et al end result is still lovely. kudos.

  • @georgebrown6540
    @georgebrown6540 7 років тому

    As always Adam, yet another fantastic build and video, thanks for sharing.

  • @Duececoupe
    @Duececoupe 7 років тому +2

    Now, that's a beautiful kitten!
    Fantastic work Adam! 👍👌👏

  • @donfrandsen7778
    @donfrandsen7778 5 років тому +1

    Nice work Adam, Gods speed with that , right on , inspiring .
    I know time is hard , bench time is precious .
    The weathering is subtle , perhaps the hair spray chipping method , and modulation in the tri camo scheme.
    Your work is spot on!!!!
    Right on !
    So many details , well done
    Thanks for sharing

  • @johnphilipburdis3798
    @johnphilipburdis3798 5 років тому

    Love your work bench. It has all the right stuff, now I what my work bench will look like,Adam.

  • @kurtwk
    @kurtwk 4 роки тому

    Watching this video while I work on my 1/35 Panther 😃. It’s really inspiring and relaxing at the same time.

  • @KruegerleDE
    @KruegerleDE 7 років тому +1

    I love your work, i love the way you present it and i love the music. Everything is great !!! Please do more like this.

  • @robertvoss6145
    @robertvoss6145 7 років тому +1

    fantastic result on the panther . a very informative video

  • @kenjohnston8173
    @kenjohnston8173 2 роки тому

    I really appreciate your honesty, very refreshing. Don't stop

  • @erickirwan8703
    @erickirwan8703 7 років тому

    Camo process didn't bore me one bit, I was fascinated. You've done a great job as usual.

  • @johnburdis5352
    @johnburdis5352 6 років тому

    Your Panther came out cool,Adam. Great paint and weathering job, mate. Fantastic.

  • @randypurtteman1183
    @randypurtteman1183 5 років тому +1

    The Panther, being one of my favorite tanks, is one I watch all the buil videos I can. I've seen this one several time and may I say that it is still one of the best I've seen on U-tube.

    • @AdamMann3D
      @AdamMann3D  5 років тому

      Thank you very much, I'm not sure I deserve such a compliment. There are things I really dont like on this one, the camo was very rewarding though. Thanks again though.

  • @Duececoupe
    @Duececoupe 7 років тому

    Yip....watched the video again! Need to get a couple of Panthers now, for my Wiking and Nordland! Informative, educational, inspiring and entertaning as always Adam!

  • @kennethcampbell1962
    @kennethcampbell1962 5 років тому +1

    Hello Adam, I do hope your well and having a great start to the new year. I’m just about to start one of these and have found this video invaluable. Plenty of side notes on instructions thanks to your experiences with it. Thanks for such a great video of a brilliant build, well done you. Take care, best wishes to you and family. Hope to see more of your videos soon. Ken.

  • @13bravo72
    @13bravo72 7 років тому

    Excellent work. Love the camo and weathering. very well done. I didn't know that Wilder made pigments. I agree with your chipping method as it does give some depth to the scratches on the vehicle.

  • @nightchaser1478
    @nightchaser1478 Рік тому

    Absolutely love it! The G variant is my most favourite one of the 3. And i loved how you kept it "factory fresh"

    • @zachnar0125
      @zachnar0125 Рік тому

      Hardly factory fresh. Looks right on point though, for a normal fielded Panther g, at the time though.

  • @steveningram8798
    @steveningram8798 7 років тому

    Great work ! love the panther G

  • @michaelmichael5643
    @michaelmichael5643 6 років тому

    that's the thing about learning the more you learn the less you know and then you must learn more... nice build , thank you.

  • @michaelsmeltzer1105
    @michaelsmeltzer1105 7 років тому +1

    Very nice job Adam.

  • @zachnar0125
    @zachnar0125 Рік тому +1

    Love the more realistic/historical style you accomplished here. Well done! Saying that I don't mind a lot of the others going crazy with the rot and rust, but this is my favorite 100%

  • @johnphilipburdis3798
    @johnphilipburdis3798 5 років тому

    Good job on the H G Panther G, A D. Great weathering.

  • @RedDragonModelWerks
    @RedDragonModelWerks 7 років тому +1

    That's a good looking Panther Adam. Stellar job dude

  • @andy909
    @andy909 7 років тому

    Great work, really liked your step by step walk through, the pace was just right and like many others I really enjoyed the music. Subscribed and soon to be watching more of your videos.

  • @opsimathics
    @opsimathics 7 років тому

    splendid job, I love it

  • @JALEO1970
    @JALEO1970 7 років тому

    Really nice finish. I like how the filter and washes enriched the camo.

  • @Damo3445
    @Damo3445 5 років тому

    Brillint video, and very mush a good inspiration for me and my weatehring techniques.

  • @ArmourEmpire
    @ArmourEmpire 7 років тому

    Nice work Adam. Very cool result

  • @KayserEin
    @KayserEin 7 років тому

    this is a really good video, and has inspired me to get on with it! Good job, both the model and the vid

  • @jamesmorgan9474
    @jamesmorgan9474 7 років тому +5

    PANTHER.......!!!!
    My all time favourite tank.
    Very interesting cammo spray technique Adam; will give it a go on next Panther build (Zvezda Ausf. D)
    Really hooked on the KAIZEN tracks too, thanks to your review back in April.

    • @loretta3791
      @loretta3791 7 років тому

      James Morgan my favorite to panthe g is amazing

  • @willabe566
    @willabe566 7 років тому

    Your work is very professional, well done :)

  • @tmfandrade
    @tmfandrade 7 років тому

    Again, a great work!

  • @mediocreworker1234
    @mediocreworker1234 6 років тому

    Have bin watching this video many times over and over again. You aren´t only good at modeling, but also making videos! Looks really realistic an keep it up. Best regards Erik hansson!

  • @neilmackay7475
    @neilmackay7475 7 років тому

    very cool video buddy I watch all your work thanks for all the tips happy new year

  • @waltervanvooren994
    @waltervanvooren994 7 років тому

    Great job!!thanks for posting this video

  • @longlance67
    @longlance67 7 років тому +11

    nice work mate, really liked the music I have to say ! it was like watching Bladerunner lol

  • @richardb3882
    @richardb3882 7 років тому

    Hi Adam, I enjoyed your video and liked the way your were explaining your thought process, gj :)

  • @paulrandall7724
    @paulrandall7724 6 років тому

    Great looking panther Adam 👍

  • @user-cv8yr6mz4u
    @user-cv8yr6mz4u 2 роки тому

    Nice making and painting 👍 I like Hermann Goring division 👍

  • @gruppenfuhrer45
    @gruppenfuhrer45 7 років тому

    Nicely done Adam

  • @ke1stcav
    @ke1stcav 7 років тому

    Adam as usual very nice work.

  • @mumtazyildiz1538
    @mumtazyildiz1538 7 років тому

    wonderful work congrats

  • @zachnar0125
    @zachnar0125 Рік тому

    Really like the mix matched wheel colors.

  • @inthelionsden6335
    @inthelionsden6335 7 років тому +1

    She's beautiful, Adam. Excellent job with the video too. I appreciate the zoom-ins - no one does it better. By the way, I prefer a less weathered look so don't let other modelers get in your head. Also your technique of air brushing with small, thin strokes is a brilliant insight. I think it recreated an extremely realistic pattern.

  • @appercumstock3017
    @appercumstock3017 3 роки тому

    Pretty good looking Panther!

  • @merlinderoy3730
    @merlinderoy3730 7 років тому

    Sehr schöner Panther geworden. Tolles Video. 👏

  • @Daltongaming78
    @Daltongaming78 3 роки тому

    Making one right now ,nice work

  • @RCTanksTrucks247
    @RCTanksTrucks247 7 років тому +2

    Unbelievable Adam, looks fantasy. Just saw this channel and I smashed that subscribe button:)

  • @paips4
    @paips4 7 років тому

    It's a beauty Adam

  • @marcellniklai9866
    @marcellniklai9866 6 років тому

    OMG! That's amazing!!

  • @51starmouredinfantry84
    @51starmouredinfantry84 4 роки тому

    I just finished the panther ausf d by Tamiya and this vid was very helpful on the camo job I did, it was based off of the late war battle of Kursk camo.

    • @AdamMann3D
      @AdamMann3D  4 роки тому

      Nice, always glad when one of my videos is of use.

  • @Tiger1AuasfE
    @Tiger1AuasfE 7 років тому

    Very nice work, i enjoyed the video.

  • @brobro72
    @brobro72 7 років тому

    Hey, man. I just watched your video. Very impressive. I know you said you were dissatisfied with the clear-coat result but when it comes down to it you took light 'plasticy' styrene and made it look like heavy plate steel. Kudos.

  • @steviegibson5847
    @steviegibson5847 7 років тому

    that's a great tutorial. love that camo too!

  • @user-lr8dd7vv5j
    @user-lr8dd7vv5j Рік тому

    Great job, workshop!!!

  • @allgood6760
    @allgood6760 2 роки тому

    Awesome build! 👍🇳🇿

  • @andreypetrovish3319
    @andreypetrovish3319 7 років тому

    Great work!

  • @lionelmoorhouse5528
    @lionelmoorhouse5528 Рік тому +1

    Looks great, working on same tank at moment.

  • @gruppenfuhrer45
    @gruppenfuhrer45 5 років тому

    Well done Adam.

  • @colinkavanagh7625
    @colinkavanagh7625 7 років тому

    Great video !! Love it....

  • @jannypaarhuis274
    @jannypaarhuis274 7 років тому

    Looks beautifull Nice video

  • @Adamslee72
    @Adamslee72 7 років тому

    great vid Adam some nice tips there too subbed

  • @roubaixrider1
    @roubaixrider1 7 років тому

    Great job Adam! I agree with your "not too much weathering" on a late war tank. I recently did a Jagdtiger and barely did anything other than a wash. Those things were not around long enough to get chipped paint or rust. It is hard to leave them looking like new but for a vehicle that saw action for a month or two at most that's probably they way they looked. Your videos are great.

    • @AdamMann3D
      @AdamMann3D  7 років тому

      Thanks very much, it's hard to convince people that just a bit of weathering is ok sometimes.

  • @donfrandsen7778
    @donfrandsen7778 4 роки тому +1

    Well Done Adam!!!
    I love the Buff tamiya choice, excellent in scale choice, its what you see.
    I tend to use the buff as well on German Armor.
    Anyway Adam, thank you for sharing
    Cheers!
    Just a note, Archer dry transfers....they take a few times to get use to. But i think they are superior , just a note

  • @Toni_G_Castroviejo
    @Toni_G_Castroviejo 7 років тому

    Awesome work! Well done, mate! :)

  • @chromewarrior7959
    @chromewarrior7959 7 років тому

    this is a great insight as to why mine are to dark. I am putting on to much paint, much to fast! Thanks again!

    • @AdamMann3D
      @AdamMann3D  7 років тому

      It took me a long time to figure out how to get camo right.

  • @alvinsmith5346
    @alvinsmith5346 7 років тому

    Very well done man. you're a real pro. I like how you describe such details. I personally don't use an airbrush or and of the stuff you use I use the Tamiya spray can stuff and brush paint my camo which is sometimes turns out OK.

  • @brobots240
    @brobots240 7 років тому

    Great video. I'd love to see a video on some of your old collection you talk about....

  • @zaklinacz70
    @zaklinacz70 7 років тому

    Fab paint work :)

  • @bengtwahlstedt1021
    @bengtwahlstedt1021 3 роки тому

    Nice tank model !!!

  • @DaCostaStudio
    @DaCostaStudio 7 років тому +1

    Awesome my friend :)

  • @longlance67
    @longlance67 Рік тому +1

    Just revisited this video, this a quality adventure

    • @AdamMann3D
      @AdamMann3D  Рік тому +1

      I airbrushed today and I can't do half this good anymore sir. Not even close.

    • @longlance67
      @longlance67 Рік тому

      @@AdamMann3D it's all down to re-familiarising yourself with your method, I had the same hurdle after painting for a few months

  • @williammann6198
    @williammann6198 7 років тому

    Hello Mr. Mann :) Great work!

  • @tonyde6423
    @tonyde6423 7 років тому

    Hey Adam panther came up fantastic, theres no right or wrong way of painting/weathering. Everyone has different perspective of what it should look like, colour tones drives you crazy if u think about too much. some things u talked about when u were making the kit sounded familiar to me. Great thing about model making is that once you finish a model that ur reasonably happy with u can grap another one and go through the whole thing again - steep learning curve but still fun. Cheers

  • @thattanknerd2274
    @thattanknerd2274 7 років тому

    Cracking build right there, just goes to show that the age of kit isn't necessary to make something beautiful. Love the editing style too, might have employ (poach) some techniques for my channel.

  • @robbiestephens49
    @robbiestephens49 5 років тому

    Great video

  • @damianbiodrowski1944
    @damianbiodrowski1944 4 роки тому

    Very appropriate music-I love New Retro Wave.

  • @bucknertarsney7674
    @bucknertarsney7674 5 років тому

    Adam, that’s a great looking Panther. Thanks for the video and thoughtful commentary along the way. When will we see some new content from you?!?!

    • @AdamMann3D
      @AdamMann3D  5 років тому +1

      As soon as I can manage. I had a baby, switched jobs and am still in the middle of moving. But when I can I'll get back to it.

  • @BenStJohn-mf3im
    @BenStJohn-mf3im 7 років тому

    For the equipment, tamiya gunmetal or tamiya metallic gray works

  • @HamilkarBarkasScaleModelling
    @HamilkarBarkasScaleModelling 7 років тому +1

    so how does it feel, the sensation of having this piece finished and published? :) very cool model and demo on how you approach things! the wheels are indeed a bit too greyish/dirty but that is not necessarily unrealistic, but maybe aesthetically not the most pleasing look.

  • @revhead5420
    @revhead5420 6 років тому

    little hint for wooden handles rub 320 Grit over handle in a length motion , leaves tiny sunked lines like wood grain then paint and the wash will sit in the lows just nice ..

  • @Panzermeister36
    @Panzermeister36 7 років тому +2

    Great video! I thoroughly enjoyed that, and I do like the music. Some might not but it was that cool type of electronic I like and not that crazy dance type stuff you sometimes hear on these videos. I do have a question for you: when you're doing the camouflage in those thin little lines, are you spraying the paint any more thinned dow than you usually would? Or is it just thin coats as it let paint being sprayed? That camouflage looks beautiful and I wish I could do something like that; you used a great technique to apply it. Thanks for the video, and foe the mention at one point there too haha :D

    • @Panzermeister36
      @Panzermeister36 7 років тому +3

      4th time watching this video already....it's so great! The issue you had with the gloss coat is exactly why I never ever use one on my models. I always seal (when I rarely do) with a matte coat as that allows the later effects to work well on the surface. Oils on a matte finish is much easier if you're aiming for that faded look.

    • @walterwilmoth8390
      @walterwilmoth8390 5 років тому

      I listen to modest mau5 work playlist
      good stuff
      I like this as well

  • @GaryArmstrongmacgh
    @GaryArmstrongmacgh 7 років тому +1

    What do you think of using dark in recessed and panel line areas...then having the rest light coloured? Saw it with modern armour. Good for WW 2 armour? Thanks for filming the whole camo process.

  • @AndrewHenderson
    @AndrewHenderson 7 років тому

    Hi Adam
    Great videos, very informative. While doing the dot filter with oils, do you apply this to the model while it has a glossy coat?

  • @Ryan64987
    @Ryan64987 7 років тому

    when applying the different levels of weathering how often did you seal the model with a clear coat or another product?

  • @russellgosselin3325
    @russellgosselin3325 7 років тому

    Nice video, Adam. The background music was lovely. What are you using for clear?

  • @bigeddie1231
    @bigeddie1231 7 років тому

    Very cool thank you

  • @adlerarmory8382
    @adlerarmory8382 2 роки тому

    Hi, the wire cutter handles were made from Bakelite (wood chips compressed in resin, a primative plastic) not the "Presstof" laminated compressed fiber/paper/resin. Germans wore hobnailed boots so the paint would be scratched down to bare metal in many points the crew used to mount the Panzer. But the Auf G likely didn't get as many boarding/dismounting cycles before it was issued then destroyed, as you mentioned.

    • @AdamMann3D
      @AdamMann3D  Рік тому

      I mean you know I have an original wire cutter here and made a video on it right?

  • @docshelley1969
    @docshelley1969 6 років тому

    Great work! Did you make the round wheel cutouts for painting the roadwheels yourself?

  • @Westcoastblackpowder
    @Westcoastblackpowder 7 років тому

    Hi Adam, great work as usual, I'm currently doing Tamyia's 1/35 Tiger IH and want to model Tiger 131, i am however stumped on what colour of base paint to use? A desert tan? What exactly would give the best results to the historic colours?

  • @rfs3lol
    @rfs3lol 7 років тому +5

    The music has a definite mass effect 2 vibe.

  • @johnburdis5352
    @johnburdis5352 5 років тому

    Beautiful paint and weathering job on the Panther G. Is the crew heater from a Dragon kit? The tutorial was great,Adam.

  • @milky55way2012
    @milky55way2012 7 років тому

    Been away from the modelling for awhile and what'ya know Adam builds a nice Pather G! Very nice weathering....a small idea if I may, try weathering powers for the model instead of dot filters, I use a fan brush and use circular motions, to me it's more realistic since they got dirty this way anyhow...but of course just a suggestion.
    Great You tube channel......

  • @randypurtteman1183
    @randypurtteman1183 6 років тому

    Ever video I watch brings a little more respect from me as to your talents. it's a toss up as to who is better you, or "Panzermeister 36". I think however that you are a bit more of a rivet counter ( which is not a bad thing in my opinion) while he always seems to be genuinely surprised when his models turn out fantastic. At any rate I am humbled by either one of you. Thanks again for the interesting and inspiring videos.

    • @AdamMann3D
      @AdamMann3D  6 років тому +1

      Thanks man, I actually agree very much with your points on Evan and myself. I tend to get caught up on the technical aspects of vehicles and he is very go with the flow. I envy his outlook in a lot of ways. We build models while talking on Skype quite a bit so he tries to help me be less stuck on things, and I explain tool clamps and track types to him. You're too kind though.

  • @khalidfadhlanhamizan1712
    @khalidfadhlanhamizan1712 6 років тому

    Do you have any tips for how to using/spray clear coats??

  • @IS-2-1944
    @IS-2-1944 4 роки тому

    Where did you buy this Panther Model? I can’t find it and I was searching for it a long time

  • @tankatron7387
    @tankatron7387 7 років тому

    Did you make your own painting board you use to do the road wheels or did you buy it? I hate painting the rims free hand.