I'm glad I'm not the only one who had issues with the instructions. :D I have the TR80, and found the instructions severely lacking, and as you mentioned, a lot of the measurements were ambiguous or even wrong. I think you will help a lot of people with this video. Good work! :D
@@GleNRG you are so right, just got my TR-160MK4 yesterday and I wish I saw your video before I started the build. They’ve made some revisions, some for the better, some for the worst. 1) they now use ball spring T-nuts instead of the clips👍, none of my screw/washer/nut bags were labeled 😤and the manual is still lacking(now the middle “H” piece is listed as 380mm from the rear). Thank you for including the older manual for reference. Out of all the build videos I saw, yours is the most informative. This might not be possible for some but you really need two people to make building this rig less painful. One person can do it, just be prepared for some trials and tribulations.
@@kevinstevens3429 thanks mate. Yep the instructions made it a hard project, but once it is done, I haven't looked back. After 12 months I needed to tighten the DD1 brackets a little as the wheel started moving. Other than that, the frame is super solid and well worth the purchase. 👍
Sir! you are a legend, loved the video, mind you, I built my own 8020 rig 7 years ago, parts from 8020 Australia, and I quit and sold everything 2 years ago. You are making me miss everything back again! I wish I had pre organised sets to buy back then. Such a cool hobby!
Hehe thanks Paolo. Yeah I reckon I will keep this long after I am finished with it. That being said, I've been racing every day for about 15 years now. I don't think I'll be letting it die in a corner any time soon. 👍
Great video, I particularly liked the personal touches and especially the growth of your lad/rig bit😂. I’m dismantling my old wooden rig and building my new TR160 today. Your advice will really come in handy. Cheers.
Thanks mate. I still love my frame, hasn't missed a beat. After about 12 months I needed to tighten a few bolts at the wheel mount, but that only took 5 mins. Very solid product, enjoy. And Merry Xmas. 👍
I'm going from a G29 home built rig as well to a DD1 and a full blown setup. This video was a great help to me as I'm doing research at this point for a cockpit. Thank you for your time and efforts, great stuff. George-in Oklahoma.
@@GleNRG Turned off?? Not at all sir. Just the opposite LOL. I just can't wait to get started. At 62 and retired now, I may have to get a pace maker first! I'm pumped. Thx again. BTW I'm going to have a look see at some of your I racing videos. My sims are RRE, AMS2, PC2, F1 2020 and just to review it PC3. Don't have Iracing and Rf2. Take care for now.
Really nice video, thank you for all the insights and tips, you managed to make it very entertaining and to the point; I am currently researching for my 1st sim rig as I am upgrading from g25/wheelstandpro to fanatec gt dd pro and your video was extremely helpful! Thank you for all your efforts and enjoy your rig
Thanks a lot Marcus, and thanks for the feedback mate. Yep, I love my new setup. I've had it for a while now so it's just like "The Office" to me now. I haven't changed all that much since this video so I guess it all worked put 1st time. This is a top notch frame, I highly recommend it. 👍
Great video mate. I was going to buy the Trak Racer for my first sim but got lucky when a guy was selling his rig that was 80% what I was after. His rig was a Simrig and already assembled so I didn't need to go through your pain.
Very interesting to watch! It obviously wasn't an easy build but well worth it in the end! So glad you are so happy with the rig and room now it's all finished.
Thanks Terry. I'm not to sure if it will ever be finished... 🤣🤣🤣 I am super stoked with the way it turned out though, already settled in and ready to shave seconds off my best times... 😉
Great video on the build. I just built mine and had some of the same "issues" to figure out. I ended up placing the seat support profiles flat, because the seat was just sitting too high to my liking. Lots of good info in your video!! I'm trying to insert a t-nut in the middle of a profile at the moment and going through a lot of emotions. 😂😂😂
Thanks mate, hope you got some good tips out of it. I feel your pain with the T Nut in the middle sections. I think the time I filmed it was the only time I got it first go. 😉
Great video. Im going from the G29 after 6 years to simucube 2 pro, heusikenveld sprints, cube control GT, Simlab GT1. So got a big mission ahead of me, but I learned a few things today. Thanks again.
Well done mate, love the build video! I got myself a TR80 back at the start of 2020, kicking myself I didn't spend the little extra to get the 160 it looks the goods!
I just wanted to say thank you. After about 12 views, your efforts have saved me a ton of frustration. Unfortunately, TR sent me two identical right side seat brackets....oof.
It's an absolute pleasure Patric, I'm glad you got something out if it. I reckon you could still use those brackets to comlete the setup. My brackets look backward, but done according to the instructions. You could maybe have one the wrong way around, I'm not sure how the levels would be of the chair though.
hey glen, unfortunately i saw your video after i did build it up. i only watched boosted medias video. in the end, there is a lot of text in the boosted media video that didnt really help me or just explaining obvious things. your video would have helped me a lot more! i did see some problems in advance, unlike you, but i still didnt know the mm to place it properly. adjusting always leaves behind slight scratches. that video deservers to be on top1 if you search for tr160 build! highly recommended
Thanks a lot Tobias, I appreciate the nice comments mate. I watched the Boosted video before my build as well. When I was going thorough my build, I realised then how commentry can be swayed by endorsements and sponsorship. This was a fairly blunt video, without any prior engagement with TrakRacer. I made it to hopefully help others along their way. 👍
Great video.. Just picked my try 160 second hand. This will help alot when I build it to my height. One thing.. Did you ever tilt the pedal plate? The guy before me did this, so its already to go.
Enjoy mate. It's a solid unit and after 12 months have only need to tighten 2 screws in total after everyday use. I have the pedal plate level as the pedals I have required that. Your pedals may be different, so I would suggest getting them mounted before put tighten the plate completely. Enjoy mate, you'll love it. 👍
cool build, just about finished with my TR160... just a note... you should be using eye protection when you're using a power saw to cut the wood. Accidents do happen, plus it's a good example for your son.
Thanks for the video mate. I’m having a lot of trouble with the seat. Seems simple… How exactly did you determine the spacing between the seat rails and then the seat brackets so that the seat brackets were correctly spaced for the seat? Thanks in advance
G'day mate. Not sure if you've worked in out yet, but for my bracket there weren3 holes for each corner. I just used the rear holes and it sort of just lined up. Hope it helps mate.
Excellent video and extremely helpful. I am ready to update my old Next Level rig and computer so these videos are extremely valuable coming from a sim racer like yourself. Just wondering if you are more than happy with the Heuskinveld pedal set? Thinking up updating my Fanatec Clubsport V3 pedal set to the Heuskinfel Ultimate+ pedal set.
Thanks Richard, hopefully this video helps you along your build journey. I came from the Fanatec V3 pedals, which were a big step up from the T3PA pedals they replaced. I am super impressed with the Ultimates. The are the original and the best, and highly recommend getting them. 👍
Thanks Moe. I can measure it for you when I get home from work mate. It will more than likely be slightly different to yours, all I did was measure my gap and trim to size. I will get back to you tonight with the measurements mate. 👍
No worries mate. I forgot to do it last night mate, but if you go to the chapter "A Personal Touch" towards the end I show how I made it. I basically made a squarish plate underneath to cover the area, then measured out the top section from my rig. Then cut a basic section and kept going back inside to check it fitted, then made little adjustments as I went along. I thought I had it right then when securing it, found the top lid was hitting the gear shifter, so went back out and cut another small section to make sure it cleared it. 👍
@@GleNRG thank u so much, Oh BTW I saw ur video that u going to get break for a while, enjoy it man , and get back I wish I know ur chanel before that I really enjoyed ur video, once I finish my rig I'll join u for sure, thanks again man !
I had 2 major issues: One being the pedal plate moving around when brake was pushed hard. I hammered the clamps with a rubber hammer to get it strong enough - no chance tighten it enough by hand. The other was the seat: It was generally too high positioned and left you not enough room to make the perfect combination together with the wheelstand that was generally too low. So I flipped the profiles below the seat by 90 degrees which lowered the whole seat by 4 cm -> definitely better and also easier to get out of the seat.
That's a great idea about the profile flip, Marcel. The seat always felt a bit high when I installed it, I was thinking of flipping the bracket itself 180 degrees as it always looked backwards according to the instructions. I haven't had any issues with the pedal plate, It's been rock solid so far. I'd be concerned about hitting those clamps too hard, If you thread the screws, they'll loose their grip. If that is what has happened to you, you could replace the clamps with some M8 screws to see if that fixes the problem. Thanks for the feedback mate. 👌
Nice vid mate. Next do yourself a favour and get some transducers. They are a game changer. Start with a buttkicker under your seat. Then build up from there.
Gday mate, the 2 main sections for using the clamps was to hold the uprights in place before they were secured. I was able to put the spirit level on top and make it absolute vertical, then clamp it tight before screws went in. They were also really handy for the pedal plate uprights too.
Is It good for tall guys? I want to mount fanatec DD2, and other fanatec stuff on It including gearbox and handbrake. But will i be comfortable in It? Im 6.4
Ugh! The metal shards issue is a show stopper for me. Is it really as bad as you make it sound? It's been 2 years, hopefully they have cleaned that up by now.
After spending $1440 on this setup..... Definitely not worth it. Aleast on the putting together aspect. Will update if it's really worth it when I complete the build.
Looks like a big headache and frustrating i would not want one if it was free because of it. There is loads of videos of guys saying the same thing which is shit instructions and frustation plus in the end it may be strong and all but the hell u go through cant be worth it
Yeah it is a challenge, but worth it in the end. It's tough to build any profile rig, whatever brand you get. It's definitely a different type of building process. Hopefully a video like this can help people along the way. 👍
I'm glad I'm not the only one who had issues with the instructions. :D
I have the TR80, and found the instructions severely lacking, and as you mentioned, a lot of the measurements were ambiguous or even wrong.
I think you will help a lot of people with this video. Good work! :D
Thanks Henrik. If I can help 1 person avoid the mistakes I made, then this video has done its job... hehe 👍
@@GleNRG you are so right, just got my TR-160MK4 yesterday and I wish I saw your video before I started the build. They’ve made some revisions, some for the better, some for the worst. 1) they now use ball spring T-nuts instead of the clips👍, none of my screw/washer/nut bags were labeled 😤and the manual is still lacking(now the middle “H” piece is listed as 380mm from the rear). Thank you for including the older manual for reference. Out of all the build videos I saw, yours is the most informative. This might not be possible for some but you really need two people to make building this rig less painful. One person can do it, just be prepared for some trials and tribulations.
@@kevinstevens3429 thanks mate. Yep the instructions made it a hard project, but once it is done, I haven't looked back. After 12 months I needed to tighten the DD1 brackets a little as the wheel started moving. Other than that, the frame is super solid and well worth the purchase. 👍
Sir! you are a legend, loved the video, mind you, I built my own 8020 rig 7 years ago, parts from 8020 Australia, and I quit and sold everything 2 years ago. You are making me miss everything back again! I wish I had pre organised sets to buy back then. Such a cool hobby!
Hehe thanks Paolo. Yeah I reckon I will keep this long after I am finished with it. That being said, I've been racing every day for about 15 years now. I don't think I'll be letting it die in a corner any time soon. 👍
Great video, I particularly liked the personal touches and especially the growth of your lad/rig bit😂. I’m dismantling my old wooden rig and building my new TR160 today. Your advice will really come in handy. Cheers.
Thanks mate. I still love my frame, hasn't missed a beat. After about 12 months I needed to tighten a few bolts at the wheel mount, but that only took 5 mins. Very solid product, enjoy. And Merry Xmas. 👍
I'm going from a G29 home built rig as well to a DD1 and a full blown setup. This video was a great help to me as I'm doing research at this point for a cockpit. Thank you for your time and efforts, great stuff. George-in Oklahoma.
Thanks George. I hope you're not turned off the TR160, once it is done, it is awesome. Just got quite a few fiddly bits. 👍
@@GleNRG Turned off?? Not at all sir. Just the opposite LOL. I just can't wait to get started. At 62 and retired now, I may have to get a pace maker first! I'm pumped. Thx again. BTW I'm going to have a look see at some of your I racing videos.
My sims are RRE, AMS2, PC2, F1 2020 and just to review it PC3. Don't have Iracing and Rf2. Take care for now.
Really nice video, thank you for all the insights and tips, you managed to make it very entertaining and to the point; I am currently researching for my 1st sim rig as I am upgrading from g25/wheelstandpro to fanatec gt dd pro and your video was extremely helpful! Thank you for all your efforts and enjoy your rig
Thanks a lot Marcus, and thanks for the feedback mate. Yep, I love my new setup. I've had it for a while now so it's just like "The Office" to me now. I haven't changed all that much since this video so I guess it all worked put 1st time. This is a top notch frame, I highly recommend it. 👍
thanks for the video it helped me alot i just built the tr160
Great to hear Maggie, after 12 months my rig is still rock solid. I love my setup. 👍
Great video mate. I was going to buy the Trak Racer for my first sim but got lucky when a guy was selling his rig that was 80% what I was after. His rig was a Simrig and already assembled so I didn't need to go through your pain.
Thanks Brett. Yeah it was a testing time while building the rig. Now it's done though, I can sit back, relax and enjoy my room. 👍
Very interesting to watch! It obviously wasn't an easy build but well worth it in the end! So glad you are so happy with the rig and room now it's all finished.
Thanks Terry. I'm not to sure if it will ever be finished... 🤣🤣🤣
I am super stoked with the way it turned out though, already settled in and ready to shave seconds off my best times... 😉
Great video on the build. I just built mine and had some of the same "issues" to figure out. I ended up placing the seat support profiles flat, because the seat was just sitting too high to my liking. Lots of good info in your video!!
I'm trying to insert a t-nut in the middle of a profile at the moment and going through a lot of emotions. 😂😂😂
Thanks mate, hope you got some good tips out of it. I feel your pain with the T Nut in the middle sections. I think the time I filmed it was the only time I got it first go. 😉
Great video. Im going from the G29 after 6 years to simucube 2 pro, heusikenveld sprints, cube control GT, Simlab GT1. So got a big mission ahead of me, but I learned a few things today. Thanks again.
No worries mate. 👍
Very well done. Thanks for this.
Thanks Blake. 👍
Well done mate, love the build video! I got myself a TR80 back at the start of 2020, kicking myself I didn't spend the little extra to get the 160 it looks the goods!
Thanks Brad. I love my new rig. 👍
Hello and Happy new years, you are giving me great inspiration for create my own homecockpit for flight simulator. Thank you so much
Thanks mate, and happy new years to you too. All the best.
I just wanted to say thank you. After about 12 views, your efforts have saved me a ton of frustration. Unfortunately, TR sent me two identical right side seat brackets....oof.
It's an absolute pleasure Patric, I'm glad you got something out if it. I reckon you could still use those brackets to comlete the setup. My brackets look backward, but done according to the instructions. You could maybe have one the wrong way around, I'm not sure how the levels would be of the chair though.
hey glen, unfortunately i saw your video after i did build it up. i only watched boosted medias video. in the end, there is a lot of text in the boosted media video that didnt really help me or just explaining obvious things. your video would have helped me a lot more! i did see some problems in advance, unlike you, but i still didnt know the mm to place it properly. adjusting always leaves behind slight scratches. that video deservers to be on top1 if you search for tr160 build! highly recommended
Thanks a lot Tobias, I appreciate the nice comments mate. I watched the Boosted video before my build as well. When I was going thorough my build, I realised then how commentry can be swayed by endorsements and sponsorship. This was a fairly blunt video, without any prior engagement with TrakRacer. I made it to hopefully help others along their way. 👍
Good work mate. Well done. Looks great👍🏼👍🏼👍🏼
Thanks Darren. 👍
Great video.. Just picked my try 160 second hand.
This will help alot when I build it to my height.
One thing.. Did you ever tilt the pedal plate?
The guy before me did this, so its already to go.
Enjoy mate. It's a solid unit and after 12 months have only need to tighten 2 screws in total after everyday use.
I have the pedal plate level as the pedals I have required that. Your pedals may be different, so I would suggest getting them mounted before put tighten the plate completely.
Enjoy mate, you'll love it. 👍
this was a cracking video to watch!
Thanks mate, I sincerely appreciate the nice comment. I'm not making videos any more, I do miss it. Have a good day. 👍
Thank you very much for your experience!
Cheers mate. I tried to put it all in there. This definitely wasn't sponsored, so just an honest review. 👍
@@GleNRG very appreciated. Thanks
cool build, just about finished with my TR160... just a note... you should be using eye protection when you're using a power saw to cut the wood. Accidents do happen, plus it's a good example for your son.
Thanks Jeff, I should have thought of that. 👍
Enjoy your cave!
Cheers mate. Been 18 months since I made that video. I use it everyday and absolutely love it. 👍
Nice video !!!
Thank you. 👍
Great vid fella
Thanks Ken. 👍
Well done mate i like it
Cheers mate. 👍
Thanks for the video mate. I’m having a lot of trouble with the seat. Seems simple… How exactly did you determine the spacing between the seat rails and then the seat brackets so that the seat brackets were correctly spaced for the seat? Thanks in advance
G'day mate. Not sure if you've worked in out yet, but for my bracket there weren3 holes for each corner. I just used the rear holes and it sort of just lined up. Hope it helps mate.
What kind of led strip lights you use and can you take a pic to show place of the lights.
does that wheel plate hold? I'm building a wood rig and I'm thinking about getting that plate to screw it to the 2x6 uprights...
Nice video, thanks for the tips!! It looks easy to take two steps back all the time with these instructions. What monitor are you using on that rig?
Thanks mate, hopefully a few helpful tips for you. I'm using a 49 Superultrawide at the moment. Fits the setup perfectly. 👍
Excellent video and extremely helpful. I am ready to update my old Next Level rig and computer so these videos are extremely valuable coming from a sim racer like yourself. Just wondering if you are more than happy with the Heuskinveld pedal set? Thinking up updating my Fanatec Clubsport V3 pedal set to the Heuskinfel Ultimate+ pedal set.
Thanks Richard, hopefully this video helps you along your build journey. I came from the Fanatec V3 pedals, which were a big step up from the T3PA pedals they replaced. I am super impressed with the Ultimates. The are the original and the best, and highly recommend getting them. 👍
@@GleNRG Thanks Glen, appreciate your feedback. Will be ordering the TR160 and Heuskinveld pedal set. Can't wait!
Nice work man, well done !
Is it possible to share the cabinet's measurements?, thank in advance
Thanks Moe. I can measure it for you when I get home from work mate. It will more than likely be slightly different to yours, all I did was measure my gap and trim to size. I will get back to you tonight with the measurements mate. 👍
@@GleNRG oh that would be amazing, thank u man!
No worries mate. I forgot to do it last night mate, but if you go to the chapter "A Personal Touch" towards the end I show how I made it. I basically made a squarish plate underneath to cover the area, then measured out the top section from my rig. Then cut a basic section and kept going back inside to check it fitted, then made little adjustments as I went along. I thought I had it right then when securing it, found the top lid was hitting the gear shifter, so went back out and cut another small section to make sure it cleared it. 👍
@@GleNRG thank u so much, Oh BTW I saw ur video that u going to get break for a while, enjoy it man , and get back I wish I know ur chanel before that I really enjoyed ur video, once I finish my rig I'll join u for sure, thanks again man !
I had 2 major issues: One being the pedal plate moving around when brake was pushed hard. I hammered the clamps with a rubber hammer to get it strong enough - no chance tighten it enough by hand. The other was the seat: It was generally too high positioned and left you not enough room to make the perfect combination together with the wheelstand that was generally too low. So I flipped the profiles below the seat by 90 degrees which lowered the whole seat by 4 cm -> definitely better and also easier to get out of the seat.
That's a great idea about the profile flip, Marcel. The seat always felt a bit high when I installed it, I was thinking of flipping the bracket itself 180 degrees as it always looked backwards according to the instructions.
I haven't had any issues with the pedal plate, It's been rock solid so far. I'd be concerned about hitting those clamps too hard, If you thread the screws, they'll loose their grip. If that is what has happened to you, you could replace the clamps with some M8 screws to see if that fixes the problem.
Thanks for the feedback mate. 👌
Nice vid mate. Next do yourself a favour and get some transducers. They are a game changer. Start with a buttkicker under your seat. Then build up from there.
Thanks mate. I will look into it. Hope all is well Knackers... 👍
In which parts of the build did you use the clamps?
Gday mate, the 2 main sections for using the clamps was to hold the uprights in place before they were secured. I was able to put the spirit level on top and make it absolute vertical, then clamp it tight before screws went in. They were also really handy for the pedal plate uprights too.
Is It good for tall guys? I want to mount fanatec DD2, and other fanatec stuff on It including gearbox and handbrake. But will i be comfortable in It? Im 6.4
Hi Karol. You'll be fine mate, I'm 6 foot 2 and only set it up on medium length, the seat itself can go back a lot further. 👍
Thanks, have just ordered one. Wish me luck with assembling :D
Nice work. You'll be right mate. Just take your time, as rushing will have you back tracking later on. Enjoy the build, let me know how you go. 👍
hey man , how is the flex on the pedals and the steering wheel ?
Really solid mate. They haven't budged since I first installed them. I might check all of the bolts this weekend, I'll let you know how I go.
What inch is that monitor you have
Gday mate. It's a 49 inch ultrawide. 👍
Ugh! The metal shards issue is a show stopper for me. Is it really as bad as you make it sound? It's been 2 years, hopefully they have cleaned that up by now.
how the fuck do you pull the arms out of the sliders?!
Your hair is getting longer... become a hippie soon :-)
Hehe... 🤣🤣🤣
After spending $1440 on this setup..... Definitely not worth it. Aleast on the putting together aspect. Will update if it's really worth it when I complete the build.
Looks like a big headache and frustrating i would not want one if it was free because of it. There is loads of videos of guys saying the same thing which is shit instructions and frustation plus in the end it may be strong and all but the hell u go through cant be worth it
Yeah it is a challenge, but worth it in the end. It's tough to build any profile rig, whatever brand you get. It's definitely a different type of building process. Hopefully a video like this can help people along the way. 👍
Great Video, a pleasure to watch 👍
Thanks mate. 👍